Coal-fired Power Plants with Flexible Amine-based CCS and Co-located Wind Power: Environmental, Economic and Reliability Outcomes

Carbon Capture and Storage (CCS) technologies provide a means to significantly reduce carbon emissions from the existing fleet of fossil-fired plants, and hence can facilitate a gradual transition from conventional to more sustainable sources of electric power. This is especially relevant for coal plants that have a CO2 emission rate that is roughly two times higher than that of natural gas plants. Of the different kinds of CCS technology available, post-combustion amine based CCS is the best developed and hence more suitable for retrofitting an existing coal plant. The high costs from operating CCS could be reduced by enabling flexible operation through amine storage or allowing partial capture of CO2 during high electricity prices. This flexibility is also found to improve the power plant’s ramp capability, enabling it to offset the intermittency of renewable power sources. This thesis proposes a solution to problems associated with two promising technologies for decarbonizing the electric power system: the high costs of the energy penalty of CCS, and the intermittency and non-dispatchability of wind power. It explores the economic and technical feasibility of a hybrid system consisting of a coal plant retrofitted with a post-combustion-amine based CCS system equipped with the option to perform partial capture or amine storage, and a co-located wind farm. A techno-economic assessment of the performance of the hybrid system is carried out both from the perspective of the stakeholders (utility owners, investors, etc.) as well as that of the power system operator.

In order to perform the assessment from the perspective of the facility owners (e.g., electric power utilities, independent power producers), an optimal design and operating strategy of the hybrid system is determined for both the amine storage and partial capture configurations. A linear optimization model is developed to determine the optimal component sizes for the hybrid system and capture rates while meeting constraints on annual average emission targets of CO2, and variability of the combined power output. Results indicate that there are economic benefits of flexible operation relative to conventional CCS, and demonstrate that the hybrid system could operate as an energy storage system: providing an effective pathway for wind power integration as well as a mechanism to mute the variability of intermittent wind power.

In order to assess the performance of the hybrid system from the perspective of the system operator, a modified Unit Commitment/ Economic Dispatch model is built to consider and represent the techno-economic aspects of operation of the hybrid system within a power grid. The hybrid system is found to be effective in helping the power system meet an average CO2 emissions limit equivalent to the CO2 emission rate of a state-of-the-art natural gas plant, and to reduce power system operation costs and number of instances and magnitude of energy and reserve scarcity.

Characterization of ALDH1A1 as a novel tumorigenic target mediating TAZ-induced lung tumorigenesis and stem cell phenotypes

Recent studies suggest that lung cancer stem cells (CSCs) may play major roles in lung cancer development, metastasis and drug resistance. Therefore, identification of lung CSC drivers may provide promising targets for lung cancer. TAZ (transcriptional co-activator with PDZ-binding motif) is a transcriptional co-activator and key downstream effector of the Hippo pathway, which plays critical roles in various biological processes. TAZ has been shown to be overexpressed in non-small cell lung cancer (NSCLC) and involved in tumorigenicity of lung epithelial cells. However, whether TAZ is a driver for lung CSCs and tumor formation in vivo is unknown. In addition, the molecular mechanism underlying TAZ-induced lung tumorigenesis remains to be determined. In this study, we provided evidence that constitutively active TAZ (TAZ-S89A) is a driver for lung tumorigenesis in vivo in mice and formation of lung CSC. Oncogenes upregulated in TAZ-overexpressing cells were identified with further validation. The most dramatically activated gene, Aldh1a1 (Aldehyde dehydrogenase 1 family member a1), a well-established CSC marker, showed that TAZ induces Aldh1a1 transcription by activating its promoter activity through interaction with the transcription factor TEA domain (TEAD) family member. Most significantly, inhibition of ALDH1A1 with its inhibitor A37 or CRISPR (Clustered Regularly Interspaced Short Palindromic Repeats) gene knockout in lung cancer cells suppressed lung tumorigenic and CSC phenotypes in vitro, and tumor formation in mice in vivo. In conclusion, this study identified TAZ as a novel inducer of lung CSCs and the first transcriptional activator of the stem cell marker ALDH1A1. Most significantly, we identified ALDH1A1 as a critical meditator of TAZ-induced tumorigenic and CSC phenotypes in lung cancer. Our studies provided preclinical data for targeting of TAZ-TEAD-ALDH1A1 signaling to inhibit CSC-induced lung tumorigenesis and drug resistance in the future.

Aspetti meccanicistici della coordinazione di [(PPh3)3Ru(CO)(H2)] com Timina Acido Acetico

Ruthenium complexes have proved to exhibit antineoplastic activity related to the interaction of metal ion with DNA nucleobases. It is indeed of great interest to provide new insights on theses cutting-edge studies, such as the identification of distinct coordinative modes of DNA binding sites. During the investigation on the reaction between [(PPh3)3Ru(CO)(H)2], 1, and the Thymine Acetic Acid (THA) as model for nucleobases, we identified an unstable monohapto hydride acetate complex 2, which rapidly evolves into elusive intermediates whose nature was evidenced by NMR spectra and DFT calculations. We obtained crystals of [(PPh3)2Ru(CO)(k1-THA)(k2-THA)] 17, and [Ru(CO)(PPh3)2(k2-N,O)-[THA(A)];(k1-O)[THA(B)]2 18, phosphine ligands assuming cis conformation. The thesis deals on the analogue reactions of 1 with acetic acid by varying different parameters and operating conditions. The reaction yields to the hydride dihapto-acetate [(PPh3)2RuH(CO)(k2-Ac)] 8 through the related meridian monohapto, by releasing of phosphine ligand. However, the reaction yields a mixture of compounds, in which the dihapto hydride complex 8 is prevailing in any cases and does not provide any disclosure for the proposed mechanistic aspects. The reaction with two equivalents of acetic acid, affords the complex [(PPh3)2Ru(CO)(k1-Ac)(k2-Ac)] 11, exhibiting mutual trans:cis locations in 2:1 ratio for the phosphine. Such evidence agrees with the results obtained DFT calculations in vacuo, whereas it is in contrast with those obtained with the THA. Therefore we can inferred that the products obtained from the latter reaction is intermolecularly ruled by the hydrogen binding interactions between the functions [-NH•••(O)C-] in the two coordinated thymine ligands.

Fijación de precios : Costo Plus (costo más margen) y Target Costing (costeo objetivo),

Los tres factores básicos a considerar en la fijación de precios de productos o servicios son los clientes, la competencia y los costos. Dos enfoques son básicamente utilizados a partir de la información de la ontabilidad Gerencial.El enfoque de Cost-Plus (costo más un margen) utiliza una fórmula general que agrega un margen(Mark up) al costo base, como punto de partida de la decisión de fijación de precios.Muchos costos distintos (como los absorbentes de producción o totales) pueden servir como base del costo, alaplicar la fórmula del costo más margen. Después los precios se modifican con base en las reacciones de los clientes y las respuestas de los competidores.El enfoque de fijación de precios más usado hoy es el Costo Objetivo (Target Cost), en el cual primero se fijael precio objetivo que están dispuestos a pagar los clientes por un producto o servicio. Una utilidad de operación objetivo por unidad se resta al precio objetivo para determinar el costo objetivo por unidad. El reto para la organización es hacer las mejoras necesarias en sus costos mediante la ingeniería de valor y el mejoramiento continuo.

Características do gás durante a gasificação de biomassa em leito fluidizado

Durante os últimos anos, a procura mundial de recursos energéticos renováveis tem sofrido um grande aumento. Neste grupo insere-se a biomassa, cuja conversão termoquímica, principalmente através de tecnologias de combustão e gasificação, é utilizada para a produção de energia térmica e elétrica. No processo de gasificação de biomassa é possível obter um combustível gasoso secundário com variadas aplicações, podendo inclusive servir como substituto do gás natural. No entanto, ao contrário da combustão, esta tecnologia aplicada à biomassa ainda está em fase de demonstração a nível industrial, apresentando algumas limitações em alguns aspetos tecnológicos, entre os quais a qualidade do gás produzido. Neste contexto, e com o objetivo de contribuir para o conhecimento da aplicabilidade desta tecnologia, surge o presente trabalho, onde a caracterização e definição das condições de operação de um gasificador de biomassa, bem como a caracterização do gás produzido foram objeto de estudo. Foi realizado um conjunto de experiências de gasificação direta, num reator de leito fluidizado borbulhante à escala piloto, com dois tipos de biomassa tipicamente encontrados em Portugal, e para diferentes condições de operação do gasificador, nomeadamente no que diz respeito à razão de equivalência. A biomassa utilizada consistiu em pellets comerciais de madeira e estilha de biomassa florestal residual derivada de pinheiro (Pinus pinaster), e resultante de operações florestais em Portugal. Na gama de temperatura do leito aplicada, tipicamente entre 800ºC e 875ºC, o reator funcionou em condições auto térmicas, isto é, sem a necessidade de recorrer a uma fonte de calor auxiliar externa. Em relação à composição do gás seco durante o processo de gasificação, os gases presentes em maior percentagem (em volume), para as experiências com ambos os tipos de biomassa, são o CO2 e o CO, com o primeiro a registar valores médios entre os 13.4% e os 16%, e o segundo entre 11.3% e 16.3%. Por ordem decrescente de concentração encontra-se o H2, na gama de 5.8% a 12.7%, o CH4 com valores médios entre 2.8% e 4.5%, e o C2H4 com concentrações médias entre 1.0% e 2.2%. Importa referir ainda a ausência de O2 no gás produzido. Verificou-se na concentração de H2, a principal diferença na composição do gás seco relativamente à gasificação dos dois combustíveis utilizados, com valores de concentração inferiores durante a operação com estilha de biomassa florestal residual derivada de pinheiro. Nas várias experiências realizadas, e para as condições operatórias utilizadas, observou-se que a razão de equivalência (RE) exerce um efeito significativo na composição do gás, verificando-se, genericamente, que com o aumento da RE a concentração de gases combustíveis diminui. Os valores de Poder Calorífico Inferior (PCI) obtidos para o gás seco produzido encontram-se na gama 3.4-5.6 MJ/Nm3, sendo que os valores mais elevados foram registados no decorrer dos ensaios de gasificação com pellets de madeira. Para ambos os combustíveis, o PCI do gás seco diminui com o aumento da RE.

If not the Virtual university then what? Co-producing e-learning and configuring its users

This paper reflects the changing notion of the Virtual University and its realization. We introduce an approach from the Sociology of Science and Technology (STS) which analyses the construction of the “student as a user” as seen through the “eyes of designers”. We ask how social relations are built into technological artefacts. In showing how socio-technical developments transcend sometimes contradict and various notions of “the student” we discuss difficulties and chances of bridging the gap between designers of e-learning-artefacts and its assumed addresses. (DIPF/Orig.)

Operating infrastructure for an FPGA and ARM system

Advances in FPGA technology and higher processing capabilities requirements have pushed to the emerge of All Programmable Systems-on-Chip, which incorporate a hard designed processing system and a programmable logic that enable the development of specialized computer systems for a wide range of practical applications, including data and signal processing, high performance computing, embedded systems, among many others. To give place to an infrastructure that is capable of using the benefits of such a reconfigurable system, the main goal of the thesis is to implement an infrastructure composed of hardware, software and network resources, that incorporates the necessary services for the operation, management and interface of peripherals, that coompose the basic building blocks for the execution of applications. The project will be developed using a chip from the Zynq-7000 All Programmable Systems-on-Chip family.

Automatic Target Recognition in Synthetic Aperture Radar Imagery: A State-of-the-Art Review

The purpose of this paper is to survey and assess the state-of-the-art in automatic target recognition for synthetic aperture radar imagery (SAR-ATR). The aim is not to develop an exhaustive survey of the voluminous literature, but rather to capture in one place the various approaches for implementing the SAR-ATR system. This paper is meant to be as self-contained as possible, and it approaches the SAR-ATR problem from a holistic end-to-end perspective. A brief overview for the breadth of the SAR-ATR challenges is conducted. This is couched in terms of a single-channel SAR, and it is extendable to multi-channel SAR systems. Stages pertinent to the basic SAR-ATR system structure are defined, and the motivations of the requirements and constraints on the system constituents are addressed. For each stage in the SAR-ATR processing chain, a taxonomization methodology for surveying the numerous methods published in the open literature is proposed. Carefully selected works from the literature are presented under the taxa proposed. Novel comparisons, discussions, and comments are pinpointed throughout this paper. A two-fold benchmarking scheme for evaluating existing SAR-ATR systems and motivating new system designs is proposed. The scheme is applied to the works surveyed in this paper. Finally, a discussion is presented in which various interrelated issues, such as standard operating conditions, extended operating conditions, and target-model design, are addressed. This paper is a contribution toward fulfilling an objective of end-to-end SAR-ATR system design.

The Cost of Co-viability in the Australian Northern Prawn Fishery

Fisheries management must address multiple, often conflicting objectives in a highly uncertain context. In particular, while the bio-economic performance of trawl fisheries is subject to high levels of biological and economic uncertainty, the impact of trawling on broader biodiversity is also a major concern for their management. The purpose of this study is to propose an analytical framework to formally assess the trade-offs associated with balancing biological, economic and non-target species conservation objectives. We use the Australian Northern Prawn Fishery (NPF), which is one of the most valuable federally managed commercial fisheries in Australia, as a case study. We develop a stochastic co-viability assessment of the fishery under multiple management objectives. Results show that, due to the variability in the interactions between the fishery and the ecosystem, current management strategies are characterized by biological and economic risks. Results highlight the trade-offs between respecting biological, economic and non-target species conservation constraints at each point in time with a high probability and maximizing the net present value of the fishery.

Diversity of LFPs Activated in Different Target Regions by a Common CA3 Input

Identifying the pathways contributing to local field potential (LFP) events and oscillations is essential to determine whether synchronous interregional patterns indicate functional connectivity. Here, we studied experimentally and numerically how different target structures receiving input from a common population shape their LFPs. We focused on the bilateral CA3 that sends gamma-paced excitatory packages to the bilateral CA1, the lateral septum, and itself (recurrent input). The CA3-specific contribution was isolated from multisite LFPs in target regions using spatial discrimination techniques. We found strong modulation of LFPs by target-specific features, including the morphology and population arrangement of cells, the timing of CA3 inputs, volume conduction from nearby targets, and co-activated inhibition. Jointly they greatly affect the LFP amplitude, profile, and frequency characteristics. For instance, ipsilateral (Schaffer) LFPs occluded contralateral ones, and septal LFPs arise mostly from remote sources while local contribution from CA3 input was minor. In the CA3 itself, gamma waves have dual origin from local networks: in-phase excitatory and nearly antiphase inhibitory. Also, waves may have different duration and varying phase in different targets. These results indicate that to explore the cellular basis of LFPs and the functional connectivity between structures, besides identifying the origin population/s, target modifiers should be considered.

Développement des bétons autoplaçants à faible teneur en poudre, Éco-BAP: formulation et performance

Abstract : Although concrete is a relatively green material, the astronomical volume of concrete produced worldwide annually places the concrete construction sector among the noticeable contributors to the global warming. The most polluting constituent of concrete is cement due to its production process which releases, on average, 0.83 kg CO[subscript 2] per kg of cement. Self-consolidating concrete (SCC), a type of concrete that can fill in the formwork without external vibration, is a technology that can offer a solution to the sustainability issues of concrete industry. However, all of the workability requirements of SCC originate from a higher powder content (compared to conventional concrete) which can increase both the cost of construction and the environmental impact of SCC for some applications. Ecological SCC, Eco-SCC, is a recent development combing the advantages of SCC and a significantly lower powder content. The maximum powder content of this concrete, intended for building and commercial construction, is limited to 315 kg/m[superscript 3]. Nevertheless, designing Eco-SCC can be challenging since a delicate balance between different ingredients of this concrete is required to secure a satisfactory mixture. In this Ph.D. program, the principal objective is to develop a systematic design method to produce Eco-SCC. Since the particle lattice effect (PLE) is a key parameter to design stable Eco-SCC mixtures and is not well understood, in the first phase of this research, this phenomenon is studied. The focus in this phase is on the effect of particle-size distribution (PSD) on the PLE and stability of model mixtures as well as SCC. In the second phase, the design protocol is developed, and the properties of obtained Eco-SCC mixtures in both fresh and hardened states are evaluated. Since the assessment of robustness is crucial for successful production of concrete on large-scale, in the final phase of this work, the robustness of one the best-performing mixtures of Phase II is examined. It was found that increasing the volume fraction of a stable size-class results in an increase in the stability of that class, which in turn contributes to a higher PLE of the granular skeleton and better stability of the system. It was shown that a continuous PSD in which the volume fraction of each size class is larger than the consecutive coarser class can increase the PLE. Using such PSD was shown to allow for a substantial increase in the fluidity of SCC mixture without compromising the segregation resistance. An index to predict the segregation potential of a suspension of particles in a yield stress fluid was proposed. In the second phase of the dissertation, a five-step design method for Eco-SCC was established. The design protocol started with the determination of powder and water contents followed by the optimization of sand and coarse aggregate volume fractions according to an ideal PSD model (Funk and Dinger). The powder composition was optimized in the third step to minimize the water demand while securing adequate performance in the hardened state. The superplasticizer (SP) content of the mixtures was determined in next step. The last step dealt with the assessment of the global warming potential of the formulated Eco-SCC mixtures. The optimized Eco-SCC mixtures met all the requirements of self-consolidation in the fresh state. The 28-day compressive strength of such mixtures complied with the target range of 25 to 35 MPa. In addition, the mixtures showed sufficient performance in terms of drying shrinkage, electrical resistivity, and frost durability for the intended applications. The eco-performance of the developed mixtures was satisfactory as well. It was demonstrated in the last phase that the robustness of Eco-SCC is generally good with regards to water content variations and coarse aggregate characteristics alterations. Special attention must be paid to the dosage of SP during batching.

Product/Brand co-creation methodology crossing marketing, design thinking, creativity and management: ideas(r)evolution

This thesis introduce a new innovation methodology called IDEAS(R)EVOLUTION that was developed according to an on-going experimental research project started in 2007. This new approach to innovation has initial based on Design thinking for innovation theory and practice. The concept of design thinking for innovation has received much attention in recent years. This innovation approach has climbed from the design and designers knowledge field towards other knowledge areas, mainly business management and marketing. Human centered approach, radical collaboration, creativity and breakthrough thinking are the main founding principles of Design thinking that were adapted by those knowledge areas due to their assertively and fitness to the business context and market complexity evolution. Also Open innovation, User-centered innovation and later on Living Labs models emerge as answers to the market and consumers pressure and desire for new products, new services or new business models. Innovation became the principal business management focus and strategic orientation. All this changes had an impact also in the marketing theory. It is possible now to have better strategies, communications plans and continuous dialogue systems with the target audience, incorporating their insights and promoting them to the main dissemination ambassadors of our innovations in the market. Drawing upon data from five case studies, the empirical findings in this dissertation suggest that companies need to shift from Design thinking for innovation approach to an holistic, multidimensional and integrated innovation system. The innovation context it is complex, companies need deeper systems then the success formulas that “commercial “Design thinking for innovation “preaches”. They need to learn how to change their organization culture, how to empower their workforce and collaborators, how to incorporate external stakeholders in their innovation processes, hoe to measure and create key performance indicators throughout the innovation process to give them better decision making data, how to integrate meaning and purpose in their innovation philosophy. Finally they need to understand that the strategic innovation effort it is not a “one shot” story it is about creating a continuous flow of interaction and dialogue with their clients within a “value creation chain“ mindset; RESUMO: Metodologia de co-criação de um produto/marca cruzando Marketing, Design Thinking, Criativity and Management - IDEAS(R)EVOLUTION. Esta dissertação apresenta uma nova metodologia de inovação chamada IDEAS(R)EVOLUTION, que foi desenvolvida segundo um projecto de investigação experimental contínuo que teve o seu início em 2007. Esta nova abordagem baseou-se, inicialmente, na teoria e na práctica do Design thinking para a inovação. Actualmente o conceito do Design Thinking para a inovação “saiu” do dominio da area de conhecimento do Design e dos Designers, tendo despertado muito interesse noutras áreas como a Gestão e o Marketing. Uma abordagem centrada na Pessoa, a colaboração radical, a criatividade e o pensamento disruptivo são principios fundadores do movimento do Design thinking que têm sido adaptados por essas novas áreas de conhecimento devido assertividade e adaptabilidade ao contexto dos negócios e à evolução e complexidade do Mercado. Também os modelos de Inovação Aberta, a inovação centrada no utilizador e mais tarde os Living Labs, emergem como possiveis soluções para o Mercado e para a pressão e desejo dos consumidores para novos productos, serviços ou modelos de negócio. A inovação passou a ser o principal foco e orientação estratégica na Gestão. Todas estas mudanças também tiveram impacto na teoria do Marketing. Hoje é possivel criar melhores estratégias, planos de comunicação e sistemas continuos de diálogo com o público alvo, incorporando os seus insights e promovendo os consumidores como embaixadores na disseminação da inovação das empresas no Mercado Os resultados empiricos desta tese, construídos com a informação obtida nos cinco casos realizados, sugerem que as empresas precisam de se re-orientar do paradigma do Design thinking para a inovação, para um sistema de inovação mais holistico, multidimensional e integrado. O contexto da Inovação é complexo, por isso as empresas precisam de sistemas mais profundos e não apenas de “fórmulas comerciais” como o Design thinking para a inovação advoga. As Empresas precisam de aprender como mudar a sua cultura organizacional, como capacitar sua força de trabalho e colaboradores, como incorporar os públicos externos no processo de inovação, como medir o processo de inovação criando indicadores chave de performance e obter dados para um tomada de decisão mais informada, como integrar significado e propósito na sua filosofia de inovação. Por fim, precisam de perceber que uma estratégia de inovação não passa por ter “sucesso uma vez”, mas sim por criar um fluxo contínuo de interação e diálogo com os seus clientes com uma mentalidade de “cadeia de criação de valor”

In Situ Observation of the Thermal Decomposition of Weddelite by Heating Stage Environmental Scanning Electron Microscopy

The morphological and chemical changes occurring during the thermal decomposition of weddelite, CaC2O4·2H2O, have been followed in real time in a heating stage attached to an Environmental Scanning Electron Microscope operating at a pressure of 2 Torr, with a heating rate of 10 °C/min and an equilibration time of approximately 10 min. The dehydration step around 120 °C and the loss of CO around 425 °C do not involve changes in morphology, but changes in the composition were observed. The final reaction of CaCO3 to CaO while evolving CO2 around 600 °C involved the formation of chains of very small oxide particles pseudomorphic to the original oxalate crystals. The change in chemical composition could only be observed after cooling the sample to 350 °C because of the effects of thermal radiation.