Environmental, health and safety cost benefit analysis in the United States chemical industry

The purpose of this research project is to determine whether there is a cost/benefit to allocating financial and other company-related resources to improve environmental, health and safety performance beyond that which is required by law. The issue of whether a company benefits from spending dollars to achieve environmental, health and safety performance beyond legal compliance is an important issue to the chemical manufacturing industry in the United States because of the voluminous and complex legal requirements impacting environmental, health and safety expenditures. The cost/benefit issue has practical significance because many U.S. chemical manufacturing companies base their environmental, health and safety management strategies on just achieving and maintaining compliance with legal requirements when in reality this strategy may actually be a higher cost way of managing environmental, health and safety practices. This difference in environmental, health and safety management strategy is being investigated to determine if managing environmental, health and safety to achieve performance beyond that which is required by law results in a greater benefit to companies in the U.S. chemical manufacturing sector.

Sustainable Wastewater Management: Is it Possible to Regulate Micropollution in the Future by Learning from the Past? A Policy Analysis

This paper applies a policy analysis approach to the question of how to effectively regulate micropollution in a sustainable manner. Micropollution is a complex policy problem characterized by a huge number and diversity of chemical substances, as well as various entry paths into the aquatic environment. It challenges traditional water quality management by calling for new technologies in wastewater treatment and behavioral changes in industry, agriculture and civil society. In light of such challenges, the question arises as to how to regulate such a complex phenomenon to ensure water quality is maintained in the future? What can we learn from past experiences in water quality regulation? To answer these questions, policy analysis strongly focuses on the design and choice of policy instruments and the mix of such measures. In this paper, we review instruments commonly used in past water quality regulation. We evaluate their ability to respond to the characteristics of a more recent water quality problem, i.e., micropollution, in a sustainable way. This way, we develop a new framework that integrates both the problem dimension (i.e., causes and effects of a problem) as well as the sustainability dimension (e.g., long-term, cross-sectoral and multi-level) to assess which policy instruments are best suited to regulate micropollution. We thus conclude that sustainability criteria help to identify an appropriate instrument mix of end-of-pipe and source-directed measures to reduce aquatic micropollution.

Diagnosis and management of filler adverse effects: an algorithm.

Fillers are frequently used in beautifying procedures. Despite major advancements of the chemical and biological features of injected materials, filler-related adverse events may occur, and can substantially impact the clinical outcome. Filler granulomas become manifest as visible grains, nodules, or papules around the site of the primary injection. Early recognition and proper treatment of filler-related complications is important because effective treatment options are available. In this report, we provide a comprehensive overview of the differential diagnosis and diagnostics and develop an algorithm of successful therapy regimens.

Consensus report of the European Federation of Conservative Dentistry: erosive tooth wear-diagnosis and management

OBJECTIVE Due to an increased focus on erosive tooth wear (ETW), the European Federation of Conservative Dentistry (EFCD) considered ETW as a relevant topic for generating this consensus report. MATERIALS AND METHODS This report is based on a compilation of the scientific literature, an expert conference, and the approval by the General Assembly of EFCD. RESULTS ETW is a chemical-mechanical process resulting in a cumulative loss of hard dental tissue not caused by bacteria, and it is characterized by loss of the natural surface morphology and contour of the teeth. A suitable index for classification of ETW is the basic erosive wear examination (BEWE). Regarding the etiology, patient-related factors include the pre-disposition to erosion, reflux, vomiting, drinking and eating habits, as well as medications and dietary supplements. Nutritional factors relate to the composition of foods and beverages, e.g., with low pH and high buffer capacity (major risk factors), and calcium concentration (major protective factor). Occupational factors are exposition of workers to acidic liquids or vapors. Preventive management of ETW aims at reducing or stopping the progression of the lesions. Restorative management aims at reducing symptoms of pain and dentine hypersensitivity, or to restore esthetic and function, but it should only be used in conjunction with preventive strategies. CONCLUSIONS Effective management of ETW includes screening for early signs of ETW and evaluating all etiological factors. CLINICAL RELEVANCE ETW is a clinical condition, which calls for the increased attention of the dental community and is a challenge for the cooperation with other medical specialities.

Future water quality monitoring--adapting tools to deal with mixtures of pollutants in water resource management.

Environmental quality monitoring of water resources is challenged with providing the basis for safeguarding the environment against adverse biological effects of anthropogenic chemical contamination from diffuse and point sources. While current regulatory efforts focus on monitoring and assessing a few legacy chemicals, many more anthropogenic chemicals can be detected simultaneously in our aquatic resources. However, exposure to chemical mixtures does not necessarily translate into adverse biological effects nor clearly shows whether mitigation measures are needed. Thus, the question which mixtures are present and which have associated combined effects becomes central for defining adequate monitoring and assessment strategies. Here we describe the vision of the international, EU-funded project SOLUTIONS, where three routes are explored to link the occurrence of chemical mixtures at specific sites to the assessment of adverse biological combination effects. First of all, multi-residue target and non-target screening techniques covering a broader range of anticipated chemicals co-occurring in the environment are being developed. By improving sensitivity and detection limits for known bioactive compounds of concern, new analytical chemistry data for multiple components can be obtained and used to characterise priority mixtures. This information on chemical occurrence will be used to predict mixture toxicity and to derive combined effect estimates suitable for advancing environmental quality standards. Secondly, bioanalytical tools will be explored to provide aggregate bioactivity measures integrating all components that produce common (adverse) outcomes even for mixtures of varying compositions. The ambition is to provide comprehensive arrays of effect-based tools and trait-based field observations that link multiple chemical exposures to various environmental protection goals more directly and to provide improved in situ observations for impact assessment of mixtures. Thirdly, effect-directed analysis (EDA) will be applied to identify major drivers of mixture toxicity. Refinements of EDA include the use of statistical approaches with monitoring information for guidance of experimental EDA studies. These three approaches will be explored using case studies at the Danube and Rhine river basins as well as rivers of the Iberian Peninsula. The synthesis of findings will be organised to provide guidance for future solution-oriented environmental monitoring and explore more systematic ways to assess mixture exposures and combination effects in future water quality monitoring.

The SOLUTIONS project: challenges and responses for present and future emerging pollutants in land and water resources management.

SOLUTIONS (2013 to 2018) is a European Union Seventh Framework Programme Project (EU-FP7). The project aims to deliver a conceptual framework to support the evidence-based development of environmental policies with regard to water quality. SOLUTIONS will develop the tools for the identification, prioritisation and assessment of those water contaminants that may pose a risk to ecosystems and human health. To this end, a new generation of chemical and effect-based monitoring tools is developed and integrated with a full set of exposure, effect and risk assessment models. SOLUTIONS attempts to address legacy, present and future contamination by integrating monitoring and modelling based approaches with scenarios on future developments in society, economy and technology and thus in contamination. The project follows a solutions-oriented approach by addressing major problems of water and chemicals management and by assessing abatement options. SOLUTIONS takes advantage of the access to the infrastructure necessary to investigate the large basins of the Danube and Rhine as well as relevant Mediterranean basins as case studies, and puts major efforts on stakeholder dialogue and support. Particularly, the EU Water Framework Directive (WFD) Common Implementation Strategy (CIS) working groups, International River Commissions, and water works associations are directly supported with consistent guidance for the early detection, identification, prioritisation, and abatement of chemicals in the water cycle. SOLUTIONS will give a specific emphasis on concepts and tools for the impact and risk assessment of complex mixtures of emerging pollutants, their metabolites and transformation products. Analytical and effect-based screening tools will be applied together with ecological assessment tools for the identification of toxicants and their impacts. The SOLUTIONS approach is expected to provide transparent and evidence-based candidates or River Basin Specific Pollutants in the case study basins and to assist future review of priority pollutants under the WFD as well as potential abatement options.

The Role of Forest Soils in a Northern New England Effluent Management System

The Carrabassett Valley Sanitary District in Carrabassett Valley, Maine has utilized both a forest spray irrigation system and a Snowfluent™ system for the treatment of their wastewater effluent. This study was designed to evaluate potential changes in soil properties after approximately 20 years of treatment in the forested spray irrigation site and three years of treatment in the field Snowfluent™ site. In addition, grass yield and composition were evaluated on the field study sites. After treatment with effluent or Snowfluent™, soils showed an increase in soil exchangeable Ca, Mg, Na, and K, base saturation, and pH. While most constituents were higher in treated soils, available P was lower in treated soils compared to the controls. This difference was attributed to higher rates of P mineralization from soil organic matter due to an irrigation effect of the treatment, depleting available P pools despite the P addition with the treatment. Most of the differences due to treatment were greatest at the surface and diminished with depth. Depth patterns in soil properties mostly reflected the decreasing influence of organic matter and its decomposition products with depth as evidenced by significantly higher total C in the surface compared to lower horizons. There were decreasing concentrations of total N, and exchangeable or extractable Ca, Mg, Na, K, Mn, Zn, and P with depth. In addition, there was decreasing BS with depth, driven primarily by declining exchangeable Ca and Mg. Imgation with Snowfluent™ altered the chemical composition of the grass on the site. All element concentrations were significantly higher in the grass foliage except for Ca. The differences were attributed to the additional nutrients and moisture derived from the Snowfluent™. The use of forest spray imgation and Snowfluent™ as a wastewater treatment strategy appears to work well. The soil and vegetation were able to retain most of the applied nutrients, and do not appear to be moving toward saturation. Vegetation management may be a key tool for managing nutrient accumulation on the grass sites as the system ages.

MOIRA-PLUS use in decision making on the long-term management of contaminated freshwater bodies and catchments

In the mid-long-term after a nuclear accident, the contamination of drinking water sources, fish and other aquatic foodstuffs, irrigation supplies and people?s exposure during recreational activities may create considerable public concern, even though dose assessment may in certain situations indicate lesser importance than for other sources, as clearly experienced in the aftermath of past accidents. In such circumstances there are a number of available countermeasure options, ranging from specific chemical treatment of lakes to bans on fish ingestion or on the use of water for crop irrigation. The potential actions can be broadly grouped into four main categories, chemical, biological, physical and social. In some cases a combination of actions may be the optimal strategy and a decision support system (DSS) like MOIRA-PLUS can be of great help to optimise a decision. A further option is of course not to take any remedial actions, although this may also have significant socio-economic repercussions which should be adequately evaluated. MOIRA-PLUS is designed to allow for a reliable assessment of the long-term evolution of the radiological situation and of feasible alternative rehabilitation strategies, including an objective evaluation of their social, economic and ecological impacts in a rational and comprehensive manner. MOIRA-PLUS also features a decision analysis methodology, making use of multi-attribute analysis, which can take into account the preferences and needs of different types of stakeholders. The main functions and elements of the system are described summarily. Also the conclusions from end-user?s experiences with the system are discussed, including exercises involving the organizations responsible for emergency management and the affected services, as well as different local and regional stakeholders. MOIRAPLUS has proven to be a mature system, user friendly and relatively easy to set up. It can help to better decisionmaking by enabling a realistic evaluation of the complete impacts of possible recovery strategies. Also, the interaction with stakeholders has allowed identifying improvements of the system that have been recently implemented.

Integration of physical, chemical and biological tactics against insect pests and virus diseases in horticultural crops

Actualmente, la gestión de sistemas de Manejo Integrado de Plagas (MIP) en cultivos hortícolas tiene por objetivo priorizar los métodos de control no químicos en detrimento del consumo de plaguicidas, según recoge la directiva europea 2009/128/CE ‘Uso Sostenible de Plaguicidas’ (OJEC, 2009). El uso de agentes de biocontrol como alternativa a la aplicación de insecticidas es un elemento clave de los sistemas MIP por sus innegables ventajas ambientales que se utiliza ampliamente en nuestro país (Jacas y Urbaneja, 2008). En la región de Almería, donde se concentra el 65% de cultivo en invernadero de nuestro país (47.367 ha), MIP es la principal estrategia en pimiento (MAGRAMA, 2014), y comienza a serlo en otros cultivos como tomate o pepino. El cultivo de pepino, con 8.902 ha (MAGRAMA, 2013), tiene un protocolo semejante al pimiento (Robledo et al., 2009), donde la única especie de pulgón importante es Aphis gossypii Glover. Sin embargo, pese al continuo incremento de la superficie de cultivo agrícola bajo sistemas MIP, los daños originados por virosis siguen siendo notables. Algunos de los insectos presentes en los cultivos de hortícolas son importantes vectores de virus, como los pulgones, las moscas blancas o los trips, cuyo control resulta problemático debido a su elevada capacidad para transmitir virus vegetales incluso a una baja densidad de plaga (Holt et al., 2008; Jacas y Urbaneja, 2008). Las relaciones que se establecen entre los distintos agentes de un ecosistema son complejas y muy específicas. Se ha comprobado que, pese a que los enemigos naturales reducen de manera beneficiosa los niveles de plaga, su incorporación en los sistemas planta-insecto-virus puede desencadenar complicadas interacciones con efectos no deseables (Dicke y van Loon, 2000; Jeger et al., 2011). Así, los agentes de biocontrol también pueden inducir a que los insectos vectores modifiquen su comportamiento como respuesta al ataque y, con ello, el grado de dispersión y los patrones de distribución de las virosis que transmiten (Bailey et al., 1995; Weber et al., 1996; Hodge y Powell, 2008a; Hodge et al., 2011). Además, en ocasiones el control biológico por sí solo no es suficiente para controlar determinadas plagas (Medina et al., 2008). Entre los métodos que se pueden aplicar bajo sistemas MIP están las barreras físicas que limitan la entrada de plagas al interior de los invernaderos o interfieren con su movimiento, como pueden ser las mallas anti-insecto (Álvarez et al., 2014), las mallas fotoselectivas (Raviv y Antignus, 2004; Weintraub y Berlinger, 2004; Díaz y Fereres, 2007) y las mallas impregnadas en insecticida (Licciardi et al., 2008; Martin et al., 2014). Las mallas fotoselectivas reducen o bloquean casi por completo la transmisión de radiación UV, lo que interfiere con la visión de los insectos y dificulta o impide la localización del cultivo y su establecimiento en el mismo (Raviv y Antignus, 2004; Weintraub, 2009). Se ha comprobado cómo su uso puede controlar los pulgones y las virosis en cultivo de lechuga (Díaz et al., 2006; Legarrea et al., 2012a), así como la mosca blanca, los trips y los ácaros, y los virus que estos transmiten en otros cultivos (Costa y Robb, 1999; Antignus et al., 2001; Kumar y Poehling, 2006; Doukas y Payne, 2007a; Legarrea et al., 2010). Sin embargo, no se conoce perfectamente el modo de acción de estas barreras, puesto que existe un efecto directo sobre la plaga y otro indirecto mediado por la planta, cuya fisiología cambia al desarrollarse en ambientes con falta de radiación UV, y que podría afectar al ciclo biológico de los insectos fitófagos (Vänninen et al., 2010; Johansen et al., 2011). Del mismo modo, es necesario estudiar la compatibilidad de esta estrategia con los enemigos naturales de las plagas. Hasta la fecha, los estudios han evidenciado que los agentes de biocontrol pueden realizar su actividad bajo ambientes pobres en radiación UV (Chyzik et al., 2003; Chiel et al., 2006; Doukas y Payne, 2007b; Legarrea et al., 2012c). Otro método basado en barreras físicas son las mallas impregnadas con insecticidas, que se han usado tradicionalmente en la prevención de enfermedades humanas transmitidas por mosquitos (Martin et al., 2006). Su aplicación se ha ensayado en agricultura en ciertos cultivos al aire libre (Martin et al., 2010; Díaz et al., 2004), pero su utilidad en cultivos protegidos para prevenir la entrada de insectos vectores en invernadero todavía no ha sido investigada. Los aditivos se incorporan al tejido durante el proceso de extrusión de la fibra y se liberan lentamente actuando por contacto en el momento en que el insecto aterriza sobre la malla, con lo cual el riesgo medioambiental y para la salud humana es muy limitado. Los plaguicidas que se emplean habitualmente suelen ser piretroides (deltametrina o bifentrín), aunque también se ha ensayado dicofol (Martin et al., 2010) y alfa-cipermetrina (Martin et al., 2014). Un factor que resulta de vital importancia en este tipo de mallas es el tamaño del poro para facilitar una buena ventilación del cultivo, al tiempo que se evita la entrada de insectos de pequeño tamaño como las moscas blancas (Bethke y Paine, 1991; Muñoz et al., 1999). Asimismo, se plantea la necesidad de estudiar la compatibilidad de estas mallas con los enemigos naturales. Es por ello que en esta Tesis Doctoral se plantea la necesidad de evaluar nuevas mallas impregnadas que impidan el paso de insectos de pequeño tamaño al interior de los invernaderos, pero que a su vez mantengan un buen intercambio y circulación de aire a través del poro de la malla. Así, en la presente Tesis Doctoral, se han planteado los siguientes objetivos generales a desarrollar: 1. Estudiar el impacto de la presencia de parasitoides sobre el grado de dispersión y los patrones de distribución de pulgones y las virosis que éstos transmiten. 2. Conocer el efecto directo de ambientes pobres en radiación UV sobre el comportamiento de vuelo de plagas clave de hortícolas y sus enemigos naturales. 3. Evaluar el efecto directo de la radiación UV-A sobre el crecimiento poblacional de pulgones y mosca blanca, y sobre la fisiología de sus plantas hospederas, así como el efecto indirecto de la radiación UV-A en ambas plagas mediado por el crecimiento de dichas planta hospederas. 4. Caracterización de diversas mallas impregnadas en deltametrina y bifentrín con diferentes propiedades y selección de las óptimas para el control de pulgones, mosca blanca y sus virosis asociadas en condiciones de campo. Estudio de su compatibilidad con parasitoides. ABSTRACT Insect vectors of plant viruses are the main agents causing major economic losses in vegetable crops grown under protected environments. This Thesis focuses on the implementation of new alternatives to chemical control of insect vectors under Integrated Pest Management programs. In Spain, biological control is the main pest control strategy used in a large part of greenhouses where horticultural crops are grown. The first study aimed to increase our knowledge on how the presence of natural enemies such as Aphidius colemani Viereck may alter the dispersal of the aphid vector Aphis gossypii Glover (Chapter 4). In addition, it was investigated if the presence of this parasitoid affected the spread of aphid-transmitted viruses Cucumber mosaic virus (CMV, Cucumovirus) and Cucurbit aphid-borne yellows virus (CABYV, Polerovirus) infecting cucumber (Cucumis sativus L). SADIE methodology was used to study the distribution patterns of both the virus and its vector, and their degree of association. Results suggested that parasitoids promoted aphid dispersal in the short term, which enhanced CMV spread, though consequences of parasitism suggested potential benefits for disease control in the long term. Furthermore, A. colemani significantly limited the spread and incidence of the persistent virus CABYV in the long term. The flight activity of pests Myzus persicae (Sulzer), Bemisia tabaci (Gennadius) and Tuta absoluta (Meyrick), and natural enemies A. colemani and Sphaerophoria rueppellii (Weidemann) under UV-deficient environments was studied under field conditions (Chapter 5). One-chamber tunnels were covered with cladding materials with different UV transmittance properties. Inside each tunnel, insects were released from tubes placed in a platform suspended from the ceiling. Specific targets were located at different distances from the platform. The ability of aphids and whiteflies to reach their targets was diminished under UV-absorbing barriers, suggesting a reduction of vector activity under this type of nets. Fewer aphids reached distant traps under UV-absorbing nets, and significantly more aphids could fly to the end of the tunnels covered with non-UV blocking materials. Unlike aphids, differences in B. tabaci captures were mainly found in the closest targets. The oviposition of lepidopteran T. absoluta was also negatively affected by a UV-absorbing cover. The photoselective barriers were compatible with parasitism and oviposition of biocontrol agents. Apart from the direct response of insects to UV radiation, plant-mediated effects influencing insect performance were investigated (Chapter 6). The impact of UV-A radiation on the performance of aphid M. persicae and whitefly B. tabaci, and growth and leaf physiology of host plants pepper and eggplant was studied under glasshouse conditions. Plants were grown inside cages covered by transparent and UV-A-opaque plastic films. Plant growth and insect fitness were monitored. Leaves were harvested for chemical analysis. Pepper plants responded directly to UV-A by producing shorter stems whilst UV-A did not affect the leaf area of either species. UV-A-treated peppers had higher content of secondary metabolites, soluble carbohydrates, free amino acids and proteins. Such changes in tissue chemistry indirectly promoted aphid performance. For eggplants, chlorophyll and carotenoid levels decreased with supplemental UVA but phenolics were not affected. Exposure to supplemental UV-A had a detrimental effect on whitefly development, fecundity and fertility presumably not mediated by plant cues, as compounds implied in pest nutrition were unaltered. Lastly, the efficacy of a wide range of Long Lasting Insecticide Treated Nets (LLITNs) was studied under laboratory and field conditions. This strategy aimed to prevent aphids and whiteflies to enter the greenhouse by determining the optimum mesh size (Chapter 7). This new approach is based on slow release deltamethrin- and bifenthrin-treated nets with large hole sizes that allow improved ventilation of greenhouses. All LLITNs produced high mortality of M. persicae and A. gossypii although their efficacy decreased over time with sun exposure. It was necessary a net with hole size of 0.29 mm2 to exclude B. tabaci under laboratory conditions. The feasibility of two selected nets was studied in the field under a high insect infestation pressure in the presence of CMV- and CABYV-infected cucumber plants. Besides, the compatibility of parasitoid A. colemani with bifenthrin-treated nets was studied in parallel field experiments. Both nets effectively blocked the invasion of aphids and reduced the incidence of both viruses, however they failed to exclude whiteflies. We found that our LLITNs were compatible with parasitoid A. colemani. As shown, the role of natural enemies has to be taken into account regarding the dispersal of insect vectors and subsequent spread of plant viruses. The additional benefits of novel physicochemical barriers, such as photoselective and insecticide-impregnated nets, need to be considered in Integrated Pest Management programs of vegetable crops grown under protected environments.

Influence of new integrated pest management strategies on aphidophagous predators in horticultural crops

El 1 de enero de 2014 entró en vigor la Directiva Europea 2009/128/CE sobre uso sostenible de plaguicidas y el Real Decreto 1311/2012 por el cual se traspone dicha normativa comunitaria al ámbito nacional. Estos reglamentos establecen el marco legal por el que las explotaciones agrícolas deben cumplir los principios generales de la Gestión Integrada de Plagas (GIP). Los principios de la GIP dan preferencia a aquellos métodos de control que sean sostenibles y respetuosos con el medio ambiente, dando prioridad al control biológico, al físico y a otros de carácter no químico. Sin embargo, el uso de insecticidas selectivos con los enemigos naturales es necesario en ocasiones para el adecuado manejo de las plagas en cultivos hortícolas. Por ello, el objetivo general de esta Tesis ha sido aportar conocimientos para la mejora del control de plagas en cultivos hortícolas, mediante la integración de estrategias de lucha biológica, física y química. La primera de las líneas de investigación de esta Tesis se centró en el estudio del efecto de la presencia dos depredadores, larvas Chrysoperla carnea y adultos de Adalia bipunctata, en la dispersión del virus de transmisión no persistente Cucumber mosaic virus (CMV) y del virus de transmisión persistente Cucurbit aphid-borne yellows virus (CABYV), transmitidos por el pulgón Aphis gosypii en cultivo de pepino. La tasa de transmisión de CMV fue baja para los dos tiempos de evaluación ensayados (1 y 5 días), debido al limitado movimiento de su vector A. gossypii. Las plantas que resultaron infectadas se localizaron próximas a la fuente de inóculo central y la presencia de ambos enemigos naturales no incrementó significativamente el porcentaje de plantas ocupadas por pulgones ni la tasa de transmisión de CMV. Los patrones de distribución de A. gossypii y de CMV tan solo fueron coincidentes en las proximidades de la planta central infectada en la que se liberaron los insectos. En los ensayos con CABYV, la presencia de C. carnea y de A. bipunctata respectivamente provocó un incremento significativo de la dispersión de A. gossypii tras 14 días, pero no tras 7 días desde la liberación de los insectos. La reducción en el número inicial de pulgones en la planta central infectada con CABYV fue siempre mayor tras la liberación de C. carnea en comparación con A. bipunctata. Sin embargo, la tasa de transmisión de CABYV y su distribución espacial no se vieron significativamente modificadas por la presencia de ninguno de los depredadores, ni tras 7 días ni tras 14 días desde el inicio de los ensayos. Al igual que se estudió el efecto de la presencia de enemigos naturales en el comportamiento de las plagas y en la epidemiología de las virosis que transmiten, en una segunda línea de investigación se evaluó el posible efecto del consumo de pulgones portadores de virus por parte de los enemigos naturales. Este trabajo se llevó a cabo en el Laboratorio de Ecotoxicología del Departamento de Entomología de la Universidade Federal de Lavras (UFLA) (Brasil). En él se evaluó la influencia en los parámetros biológicos del enemigo natural Chrysoperla externa al alimentarse de Myzus persicae contaminados con el virus de transmisión persistente Potato leafroll virus (PLRV). El consumo de M. persicae contaminados con PLRV incrementó significativamente la duración de la fase larvaria, reduciendo también la supervivencia en comparación a otras dos dietas a base de M. persicae no contaminados con el virus y huevos del lepidóptero Ephestia kuehniella. La duración de la fase de pupa de C. externa no difirió significativamente entre las dietas a base de pulgones contaminados con PLRV y pulgones no contaminados, pero ambas fueron menores que con la dieta con huevos de E. kuehniella. Sin embargo, ni la supervivencia en la fase de pupa ni los parámetros reproductivos de los adultos emergidos mostraron diferencias significativas entre las dietas evaluadas. Por el contrario, la supervivencia de los adultos durante los 30 primeros días desde su emergencia sí se vio significativamente afectada por la dieta, siendo al término de este periodo del 54% para aquellos adultos de C. externa que durante su fase larvaria consumieron pulgones con PLRV. Dentro de la GIP, una de las estrategias de carácter físico que se emplean para el control de plagas y enfermedades en cultivos hortícolas protegidos es el uso de plásticos con propiedades fotoselectivas de absorción de la radiación ultravioleta (UV). Por ello, la tercera línea de investigación de la Tesis se centró en el estudio de los efectos directos e indirectos (mediados por la planta) de condiciones especiales de baja radiación UV sobre el crecimiento poblacional del pulgón A. gossypii y los parámetros biológicos del enemigo natural C. carnea, así como sobre las plantas de pepino en las que se liberaron los insectos. Los ensayos se realizaron en jaulones dentro de invernadero, utilizándose en el primero de ellos plantas de pepino sanas, mientras que en el segundo las plantas de pepino fueron previamente infectadas con CABYV para estudiar de qué manera afectaba la incidencia del virus en las mismas condiciones. Las condiciones de baja radiación UV (bajo plástico Térmico Antivirus®) ejercieron un efecto directo en las fases iniciales del cultivo de pepino, promoviendo su crecimiento, mientras que en fases más avanzadas del cultivo indujeron un aumento en el contenido en nitrógeno de las plantas. Las plantas de pepino que fueron sometidas a mayor intensidad de radiación UV (bajo plástico Térmico Blanco®) al inicio del cultivo mostraron un engrosamiento significativo de las paredes de las células epidérmicas del haz de las hojas, así como de la cutícula. El uso del plástico Térmico Antivirus®, utilizado como barrera fotoselectiva para crear condiciones de baja radiación UV, no alteró con respecto al plástico Térmico Blanco® (utilizado como control) el desarrollo poblacional del pulgón A. gossypii ni los parámetros biológicos evaluados en el depredador C. carnea. En el segundo experimento, realizado con plantas infectadas con CABYV, la incidencia de la virosis enmascaró las diferencias encontradas en experimento con plantas sanas, reduciendo aparentemente la influencia de las distintas condiciones de radiación UV. Por último, para el desarrollo de las estrategias de GIP es importante estudiar los posibles efectos secundarios que los plaguicidas pueden tener en los enemigos naturales de las plagas. Es por ello que en la Tesis se evaluaron la toxicidad y los efectos subletales (fecundidad y fertilidad) de flonicamida, flubendiamida, metaflumizona, spirotetramat, sulfoxaflor y deltametrina en los enemigos naturales C. carnea y A. bipunctata. Los efectos secundarios fueron evaluados por contacto residual tanto para larvas como para adultos de ambos enemigos naturales en condiciones de laboratorio. Flonicamida, flubendiamida, metaflumizona y spirotetramat fueron inocuos para larvas de último estadio y adultos de C. carnea y A. bipunctata. Por este motivo, estos insecticidas se presentan como buenos candidatos para ser incorporados dentro de programas de GIP en combinación con estos enemigos naturales para el control de plagas de cultivos hortícolas. Sulfoxaflor fue ligeramente tóxico para adultos de C. carnea y altamente tóxico para larvas de último estadio de A. bipunctata. Para A. bipunctata, sulfoxaflor y deltametrina fueron los compuestos más dañinos. Deltametrina fue también el compuesto más tóxico para larvas y adultos de C. carnea. Por tanto, el uso de deltametrina y sulfoxaflor en programas de GIP debería tomarse en consideración cuando se liberasen cualquiera de estos dos enemigos naturales debido al comportamiento tóxico que mostraron en condiciones de laboratorio. ABSTRACT On 1 January 2014 came into effect the Directive 2009/128/EC of the European Parliament about sustainable use of pesticides and the Royal Decree 1311/2012 that transposes the regulation to the Spanish level. These regulations establish the legal framework that agricultural holdings must adhere to in order to accomplish the general principles of Integrated Pest Management (IPM). The guidelines of IPM give priority to sustainable and eco-friendly pest control techniques, such as biological and physical measures. Nevertheless, the use of pesticides that are selective to natural enemies is sometimes a necessary strategy to implement accurate pest management programs in horticultural protected crops. Therefore, the general objective of this Thesis was to contribute to the improvement of pest management strategies in horticultural crops, by means of the integration of biological, physical and chemical techniques. The first research line of this Thesis was focused on the evaluation of the effects of two aphidophagous predators, Chrysoperla carnea larvae and Adalia bipunctata adults, on the spread of the non-persistently transmitted Cucumber mosaic virus (CMV, Cucumovirus) and the persistently transmitted Cucurbit aphid-borne yellows virus (CABYV, Polerovirus), by the aphid vector Aphis gossypii in a cucumber crop under greenhouse conditions. The CMV transmission rate was generally low, both after 1 and 5 days, due to the limited movement of its aphid vector A. gossypii. Infected plants were mainly located around the central virusinfected source plant, and the percentage of aphid occupation and CMV-infected plants did not differ significantly in absence and presence of natural enemies. The distribution patterns of A. gossypii and CMV were only coincident close to the central plant where insects were released. In the CABYV experiments, the presence of C. carnea larvae and A. bipunctata adults induced significant A. gossypii dispersal after 14 days but not after 7 days. The reduction in the initial aphid population established in the central plant was always higher for C. carnea than for A. bipunctata. Nevertheless, CABYV spread was not significantly modified by the presence of each predator either in the short term (7 days) or in the long term (14 days). Furthermore, the percentage of CABYV-infected plants did not significantly differ when each natural enemy was present in any evaluation period. It is important to evaluate the influence that natural enemies have on pest dynamics and on the spread of viral diseases, but it should be also taken into account the possible effect on the performance of natural enemies when they feed on preys that act as vectors of viruses. Thus, in a second research line developed in the Laboratory of Ecotoxicology, Department of Entomology, of the Universidade Federal de Lavras (UFLA) (Brazil), it was evaluated the performance of Chrysoperla externa under the condition of consuming Myzus persicae acting as vector of Potato leafroll virus (PLRV). The diet composed of PLRV-infected M. persicae significantly increased the length and reduced the survival rate, of the larval period in regard to the other two diets, composed of non-infected M. persicae and Ephestia kuehniella eggs. The lengths of the pupal stage were not significantly different between the aphid diets, but both were significantly shorter than that of E. kuehniella eggs. Neither pupal survival nor reproductive parameters revealed significant differences among the diets. Nevertheless, the adult survival curves during the first 30 days after emergence showed significant differences, reaching at the end of this interval a value of 54% for those C. externa adults fed on PLRVinfected aphids during their larval period. According to the IPM guidelines, one of the physical strategies for the control of pests and diseases in horticultural protected crops is the use of plastic films with photoselective properties that act as ultraviolet (UV) radiation blocking barriers. In this sense, the third research line of the Thesis dealt with the study of the direct and plant-mediated influence of low UV radiation conditions on the performance of the aphid A. gossypii and on the biological parameters of the natural enemy C. carnea, as well as on the cucumber plants where insects were released. The experiments were conducted inside cages under greenhouse conditions, using for the first one healthy cucumber plants, while for the second experiment the cucumber plants were previously infected with CABYV in order to assess the influence of the virus in the same conditions. The low UV radiation conditions (under Térmico Antivirus® plastic film) seemed to exert a direct effect in the early stages of cucumber plants, enhancing their growth, and in an increasing nitrogen content at further developmental stages. The higher UV radiation exposure (under Térmico Blanco® plastic film) in the early stages of the cucumber crop induced the thickening of the adaxial epidermal cell walls and the cuticle of leaves. The use of Térmico Antivirus® plastic film as a photoselective barrier to induce low UV radiation conditions did not modify, in regard to Térmico Blanco® plastic film (used as control), neither the population development of A. gossypii nor the studied biological parameters of the predator C. carnea. In the second experiment, done with CABYV-infected cucumber plants, the incidence of the virus seemed to mask the direct and plant-mediated influence of the different UV radiation conditions. In last term, for the development of IPM strategies it is important to study the potential side effects that pesticides might have on natural enemies. For this reason, in the Thesis were tested the toxicity and sublethal effects (fecundity and fertility) of flonicamid, flubendiamide, metaflumizone, spirotetramat, sulfoxaflor and deltamethrin on the natural enemies C. carnea and A. bipunctata. The side effects of the active ingredients of the insecticides were evaluated with residual contact tests for the larvae and adults of these predators under laboratory conditions. Flonicamid, flubendiamide, metaflumizone and spirotetramat were innocuous to last instar larvae and adults of C. carnea and A. bipunctata. Therefore, these pesticides are promising candidates for being incorporated into IPM programs in combination with these natural enemies for the control of particular greenhouse pests. In contrast, sulfoxaflor was slightly toxic to adults of C. carnea and was highly toxic to last instar larvae of A. bipunctata. For A. bipunctata, sulfoxaflor and deltamethrin were the most damaging compounds. Deltamethrin was also the most toxic compound to larvae and adults of C. carnea. In accordance with this fact, the use of sulfoxaflor and deltamethrin in IPM strategies should be taken into consideration when releasing either of these biological control agents, due to the toxic behavior observed under laboratory conditions.

Ecological approaches and the development of “truly integrated” pest management

Recent predictions of growth in human populations and food supply suggest that there will be a need to substantially increase food production in the near future. One possible approach to meeting this demand, at least in part, is the control of pests and diseases, which currently cause a 30–40% loss in available crop production. In recent years, strategies for controlling pests and diseases have tended to focus on short-term, single-technology interventions, particularly chemical pesticides. This model frequently applies even where so-called integrated pest management strategies are used because in reality, these often are dominated by single technologies (e.g., biocontrol, host plant resistance, or biopesticides) that are used as replacements for chemicals. Very little attention is given to the interaction or compatibility of the different technologies used. Unfortunately, evidence suggests that such approaches rarely yield satisfactory results and are unlikely to provide sustainable pest control solutions for the future. Drawing on two case histories, this paper demonstrates that by increasing our basic understanding of how individual pest control technologies act and interact, new opportunities for improving pest control can be revealed. This approach stresses the need to break away from the existing single-technology, pesticide-dominated paradigm and to adopt a more ecological approach built around a fundamental understanding of population biology at the local farm level and the true integration of renewable technologies such as host plant resistance and natural biological control, which are available to even the most resource-poor farmers.

Noxious Weed Management: A Review of Herbicide Use at Colorado State Parks

Weed control in recreation areas is a complex public land management issue. Colorado State Parks are managed for both recreation and conservation, which often conflict. Noxious weeds affect both recreation and conservation efforts, and Parks often use herbicides to control these weeds. While herbicides are effective, they can be harmful to the environment and human health. Herbicide use at State Parks was reviewed to determine if chemical control is effective, safe, and efficient. The results revealed that many Parks are not using effective herbicides to treat noxious weeds and that some weed management plans lack pertinent information on chemical control. The results and recommendations provided can be used to improve the success of noxious weed control and create healthier Parks.

Multi-objective optimization of environmentally conscious chemical supply chains under demand uncertainty

In this work, we analyze the effect of demand uncertainty on the multi-objective optimization of chemical supply chains (SC) considering simultaneously their economic and environmental performance. To this end, we present a stochastic multi-scenario mixed-integer linear program (MILP) with the unique feature of incorporating explicitly the demand uncertainty using scenarios with given probability of occurrence. The environmental performance is quantified following life cycle assessment (LCA) principles, which are represented in the model formulation through standard algebraic equations. The capabilities of our approach are illustrated through a case study. We show that the stochastic solution improves the economic performance of the SC in comparison with the deterministic one at any level of the environmental impact.