Effects of plasticizing and crosslinking on the mechanical and barrier properties of coatings based on blends of starch and poly(vinyl alcohol)

In the last decades, intensive research has been carried out in order to replace oil-based polymers with bio-based polymers due to growing environmental concerns. So far, most of the barrier materials used in food packaging are petroleum-based materials. The purpose of the barrier is to protect the packaged food from oxygen, water vapour, water and fat. The mechanical and barrier properties of coatings based on starch-plasticizer and starch-poly(vinyl alcohol) (PVOH)-plasticizer blends have been studied in the work described in this thesis. The plasticizers used were glycerol, polyethylene glycol and citric acid. In a second step, polyethylene coatings were extruded onto paperboard pre-coated with a starch-PVOH-plasticizer blend. The addition of PVOH to the starch increased the flexibility of the film. Curing of the film led to a decrease in flexibility and an increase in tensile strength. The flexibility of the starch-PVOH films was increased more when glycerol or polyethylene glycol was added than citric acid. The storage modulus of the starch-PVOH films containing citric acid increased substantially at high temperature. It was seen that the addition of polyethylene glycol or citric acid to the starch-PVOH blend resulted in an enrichment of PVOH at the surface of the films. Tensile tests on the films indicated that citric acid acted as a compatibilizer and increased the compatibility of the starch and PVOH in the blend. The addition of citric acid to the coating recipe substantially decreased the water vapour transmission rate through the starch-PVOH coated paperboard, which indicated that citric acid acts as a cross-linker for starch and/or PVOH. The starch-PVOH coatings containing citric acid showed oxygen-barrier properties similar to those of pure PVOH or of a starch-PVOH blend without plasticizer when four coating layers were applied on a paperboard. The oxygen-barrier properties of coatings based on a starch-PVOH blend containing citric acid indicated a cross-linking and increase in compatibility of the starch-PVOH blends. Polyethylene extrusion coating on a pre-coated paperboard resulted in a clear reduction in the oxygen transmission rate for all the pre-coating formulations containing plasticizers. The addition of a plasticizer to the pre-coating reduced the adhesion of polyethylene to pre-coated board. Polyethylene extrusion coating gave a board with a lower oxygen transmission rate when the paperboard was pre-coated with a polyethylene-glycol-containing formulation than with a citric-acid-containing formulation. The addition of polyethylene glycol to pre-coatings indicated an increase in wetting of the pre-coated paperboard by the polyethylene melt, and this may have sealed the small defects in the pre-coating leading to low oxygen transmission rate. The increase in brittleness of starch-PVOH films containing citric acid at a high temperature seemed to have a dominating effect on the barrier properties developed by the extrusion coating process. 

Environmental aspects and challenges of oilseed produced biodiesel in Southeast Asia

Research on alternative fuel for the vehemently growing number of automotivesis intensified due to environmental reasons rather than turmoil in energy price and supply. From the policy and steps to emphasis the use of biofuel by governments all around the world, this can be comprehended that biofuel have placed itself as a number one substitute for fossil fuels. These phenomena made Southeast Asia a prominent exporter of biodiesel. But thrust in biodiesel production from oilseeds of palm and Jatropha curcas in Malaysia, Indonesia and Thailand is seriously threatening environmental harmony. This paper focuses on this critical issue of biodiesels environmental impacts, policy, standardization of this region as well as on the emission of biodiesel in automotive uses. To draw a bottom line on feasibilities of different feedstock of biodiesel, a critical analysis on oilseed yield rate, land use, engine emissions and oxidation stability is reviewed. Palm oil based biodiesel is clearly ahead in all these aspects of feasibility, except in the case of NOx where it lags from conventional petro diesel.

Toughening of Fibre Composite Resins through Modification of Plant Oils

Extract from the executive summary: A collaborative scoping research project to identify plant oil species with potential value in the production of fibre composite resins and assess their suitability to Queensland’s regions has been conducted by QDPI&F, USQ and Loc Composites Pty Ltd. The use of plant-oil based resins in the production of fibre composites will contribute to the Queensland economy through establishing sustainable high technology building products from renewable sources while decreasing the reliance of resin production on fossil fuels. The main objective of this project was to indentify a suite of plant oil species that show agronomic adaptability to the Australian environment (e.g. climate, soils) and economic viability of extracting plant oils for resin production within a highly competitive supply and demand production market.

New encapsulating materials for implantable devices

Synthetic, natural, or composite, biomaterials occupy a key position in the management of disease and support continuous advancement of health care. Clinical utility of many permanent and biodegradable implants can be significantly improved via surface modification. Here, we discuss a novel polymer material developed from essential oil-based monoterpene alcohol using plasma polymerisation. The developed coatings are cytocompatible and limit adhesion and proliferation of a variety of pathogens. The coating can also be used to control degradation behaviour of resorbable materials, such as magnesium.

Redução de carga orgânica recalcitrante de efluente de indústria gráfica por reação de fenton

A Casa da Moeda do Brasil (CMB) é uma empresa nacional, com mais de 300 anos de experiência na produção de valores e impressos de segurança. A produção de cédulas, realizada pelo Departamento de Cédulas (DECED), consiste de três etapas de impressão, off-set, calografia e tipografia, seguida de acabamento e embalagem semi-automatizado. A impressão calcográfica consome solução de limpeza, composta de soda cáustica e óleo sulfonado, para limpeza do cilindro de impressão, gerando um efluente líquido saturado de tinta. Este efluente apresenta baixa biodegradabilidade, apresentando uma relação DBO / DQO de aproximadamente 1:4. Em termos de tratabilidade, as estações de tratamento de efluentes (ETE) apresentam uma configuração convencional, por via biológica, demonstram pouca eficiência na degradação da matéria orgânica deste efluente. Com compostos recalcitrantes, torna-se necessária a inclusão de uma etapa terciária que permita sua degradação por via química, permitindo o descarte do efluente com características menos danosas ao ambiente. Neste trabalho, aplicou-se a reação de Fenton no efluente do DECED por sua capacidade de converter a matéria orgânica em gás carbônico e água ou, caso seja utilizado em pré-tratamentos, torna-os biodegradáveis. Foram estudadas diferentes condições para medir a influência de diferentes parâmetros na eficiência da reação. A reação de Fenton consiste na geração de radicais hidroxil (HO), por diferentes rotas, em quantidades suficientes para a degradação de matéria orgânica. Esses radicais são gerados a partir de peróxido de hidrogênio (H2O2) em reações com diferentes precursores como ozônio (O3), luz UV (ultravioleta), ultra-som e sais de ferro. No presente trabalho restringiu-se às reações com sais de ferro. Dentre os resultados obtidos, verificou-se o tempo mínimo para reação em 10 minutos. A relação entre íons ferro e peróxido de hidrogênio é menor do que a literatura normalmente sugere, 1:2, contra 1:3. Como a solução de sulfato ferroso é muito instável, passando os íons ferrosos a férricos, utilizou-se a adição direta do sal. Em escala industrial, a solução de sulfato ferroso deve ser preparada em poucas quantidades para que tenha baixo tempo de estocagem, a fim de não ser degradada. A temperatura, na faixa estudada (de 20C à 45C), é um parâmetro que tem pouca influência, pois a redução da eficiência da reação foi pequena (de 99,0% para 94,9%). O ferro utilizado na reação não se demonstrou uma nova fonte de transtornos para o ambiente. Nas condições utilizadas, a concentração de ferro residual esteve próxima ao limite permitido pela legislação no efluente tratado, necessitando apenas de alguns ajustes para a correção do problema

Desenvolvimento e produção de metabólitos de arruda (Ruta graveolens L.) exposta a substratos contaminados por hidrocarbonetos de petróleo

A indução da síntese de moléculas biologicamente ativas é conhecida como uma estratégia de defesa do organismo vegetal às condições adversas, onde plantas medicinais e/ou aromáticas são foco de pesquisa na terapêutica médica, na indústria farmacêutica, de cosméticos e de alimentos. A possibilidade de que os hidrocarbonetos de petróleo presentes no solo possam agir como agentes elicitores do metabolismo vegetal tem despertado interesse científico. O presente trabalho teve como objetivo avaliar o desenvolvimento in vivo e in vitro de Ruta graveolens L. (Rutaceae), considerando as respostas morfológicas e metabólicas na presença de petróleo e derivados. Além disso, verificar o potencial de desenvolvimento dessa espécie em áreas contaminadas, com base na hipótese de que tais substâncias podem influenciar na produção de substâncias de interesse, sem que haja redução significativa da biomassa vegetal. Foram realizados experimentos de (i) germinação in vivo em solo contaminado e parcialmente biorremediado, assim como solo com contaminação recente com óleo cru (0,8 % e 2,8 %) e diesel comercial S50 (0 % a 6,0 %), sendo que neste último foi avaliado o desenvolvimento e a produção de biomassa das plântulas; (ii) germinação in vitro em meio MS contaminado com fenantreno (1,0; 5,0 e 10,0 mg/L de meio) ou benzo[a]pireno (0,001; 0,010 e 0,100 mg/L de meio), sendo avaliado o desenvolvimento e a produção de biomassa; e (iii) resposta fisiológica de plantas oriundas do estoque in vitro à exposição de fenantreno ou benzo[a]pireno. R. graveolens teve redução significativa da germinação em solos contaminados, principalmente os solos parcialmente biorremediados pelo do processo de bioestímulo; não teve redução significativa da germinação in vivo nos solos contaminados com óleo cru, biorremediado e contaminado com diesel, porém o desenvolvimento pósgerminação foi afetado. Na exposição in vitro aos hidrocarbonetos, não houve alteração significativa na germinação nem na capacidade de desenvolvimento e produção de biomassa nas concentrações testadas de até 10 mg/L de fenantreno e até 0,1 mg/L de benzo[a]pireno. Em relação à propagação in vitro, foi possível a multiplicação de plantas em meio de cultura sem suplementação hormonal, na presença dos contaminantes. A presença de fenantreno e benzo[a]pireno in vitro não promoveu mudanças significativas nos níveis de compostos fenólicos e flavonoides totais produzidos, não havendo também alteração no perfil fitoquímico da espécie, quanto à presença de rutina. Pelo exposto, conclui-se que a espécie tem potencial para uso em biomonitoramento de solos contaminados , considerando a sua capacidade de produzir metabólitos e tolerar a presença dos hidrocarbonetos selecionados, sendo indicada ao cultivo em áreas contaminadas nos níveis investigados

Measurement of the Mechanical Properties of Filtercakes

In order to improve drilling mud design to cater for specific well situations, a more comprehensive knowledge and understanding of filter cake failure is needed. This paper describes experimental techniques aimed at directly probing the mechanical properties of filter cakes, without having to take into account artefacts due to fluid flow in the substrate. The use of rheometers allows us to determine shear yield stress and dynamic shear modulii of cakes grown on filter paper. A new scraping technique measures the strength and moisture profiles of typical filter cakes with a 0.1 mm resolution. This technique also allows us to probe the adhesion between the filter cake and its rock substrate. In addition, œdometer drained consolidation and unloading of a filter cake give us compression parameters useful for Cam Clay modelling. These independent measurements give similar results as to the elastic modulus of different filter cakes, showing an order of magnitude difference between water based and oil based cakes. We find that these standard cakes behave predominantly as purely elastic materials, with a sharp transition into plastic flow, allowing for the determination of a well-defined yield stress. The effect ofsolids loading on a given type of mud is also studied.

基于Windows系统的原油水气含量自动监测仪表远程控制系统的设计

本论文主要内容是一种应用于油田的工业用仪表的程序设计。程序体现了当今流行软件基本的设计思想，同时具有积极的现实意义。论文内容主要包括三大部分。第一部分简略地介绍仪表的总体的工作原理。从水含量，气含量两个方面进行了论述。第二部分介绍了仪表的工作过程中，涉及的硬件部分。简略的阐述了硬件部分的探测器结构部分，详细的介绍了第三部分软件编程中用到的计数卡和D／A转换板卡的原理，及编程控制的基本步骤。第三部分是仪表的软件部分，也是核心和重点部分。主要介绍了软件的总体框架，重点地说明了计数卡的驱动程序设计，数据采集，打印部分，数据库部分，实时性的实现方法。同时还有参数拟合功能中，涉及到的数理统计中参数回归法确定参数的具体方法。结合各个具体功能的说明，给出了具体的源代码。程序的其它必不可缺少，但实现起来难度相对较小的部分给出了简略的说明。该程序具有操作简单明了，界面友好，功能齐全等特点。通过对该工业仪表程序的设计，在计算机软件及硬件方面的理解，都能够得到一定水平的提高。特别是在计算机软件的设计方法，设计思想等各个方面都有深入的认识。

STRUCTURE AND PROPERTIES OF AB CROSS-LINKED POLYMERS

Hydroxy-terminated oligomers, such as polyester, polyether, or castor oil, were reacted with toluene diisocyanate to form isocyanate-terminated prepolymers, which were then reacted with 2-hydroxyethyl acrylate to obtain vinyl-terminated prepolymer (VTP).

Mechanistic study on spraying of blended biodiesel using phase Doppler anemometry

Droplet size and dynamics of blended palm oil-based fatty acid methyl ester (FAME) and diesel oil spray were mechanistically investigated using a phase Doppler anemometry. A two-fluid atomizer was applied for dispersing viscous blends of blended biodiesel oil with designated flow rates. It was experimentally found that the atomizer could generate a spray with large droplets with Sauter mean diameters of ca. 30 mm at low air injection pressure. Such large droplets traveled with a low velocity along their trajectory after emerging from the nozzle tip. The viscosity of blended biodiesel could significantly affect the atomizing process, resulting in the controlled droplet size distribution. Blended biodiesel with a certain fraction of palm oil-based FAME would be consistently atomized owing to its low viscosity. However, the viscosity could exert only a small effect on the droplet velocity profile with the air injection pressure higher than 0.2 MPa.

Protection of cattle against a natural infection of Fasciola hepatica by vaccination with recombinant cathepsin L1 (rFhCL1)

The liver fluke, Fasciola hepatica causes liver fluke disease, or fasciolosis, in ruminants such as cattle and sheep. An effective vaccine against the helminth parasite is essential to reduce our reliance on anthelmintics, particularly in light of frequent reports of resistance to some frontline drugs. In our study, Friesian cattle (13 per group) were vaccinated with recombinant F. hepatica cathepsin L1 protease (rFhCL1) formulated in mineral-oil based adjuvants, Montanide (TM) ISA 70VG and ISA 206VG. Following vaccination the animals were exposed to fluke-contaminated pastures for 13 weeks. At slaughter, there was a significant reduction in fluke burden of 48.2% in the cattle in both vaccinated groups, relative to the control non-vaccinated group, at p

Synergism between high-pressure processing and active packaging against Listeria monocytogenes in ready-to-eat chicken breast

The effects of high-pressure processing (HPP) in conjunction with an essential oil-based active packaging on the surface of ready-to-eat (RTE) chicken breast were investigated as post-processing listericidal treatment. Three different treatments were used, and all samples were vacuum packed: (i) HPP at 500. MPa for 1. min (control), (ii) active packaging based on coriander essential oil, and (iii) active packaging and HPP. When applied individually, active packaging and pressurisation delayed the growth of Listeria monocytogenes. The combination of HPP and active packaging resulted in a synergistic effect reducing the counts of the pathogen below the detection limit throughout 60. days storage at 4. °C. However, when these samples were stored at 8. °C, growth did occur, but again a delay in growth was observed. The effects on colour and lipid oxidation were also studied during storage and were not significantly affected by the treatments. Active packaging followed by in-package pressure treatment could be a useful approach to reduce the risk of L. monocytogenes in cooked chicken without impairing its quality. Industrial relevance: Ready-to-eat products are of great economic importance to the industry. However, they have been implicated in several outbreaks of listeriosis. Therefore, effective ways to reduce the risk from this pathogenic microorganism can be very attractive for manufacturers. This study showed that the use of active packaging followed by HPP can enhance the listericidal efficiency of the treatment while using lower pressure levels, and thus having limited effects on colour and lipid oxidation of RTE chicken breast.

11-ketotestosterone inhibits the alternative mating tactic in sneaker males of the peacock blenny, Salaria pavo

In the peacock blenny, Salaria pavo, a species with courtship sex-role reversal, smaller, younger males mimic the courtship behavior and the nuptial coloration of females in order to get access to nests during spawning and to parasitize egg fertilization from nest-holder males. Later in their life, sneakers transform both morphologically and behaviorally into nest-holder males. In the present paper we investigate the activational role of 11-ketotestosterone (KT), the most potent androgen in most teleost species, to promote the switch between tactics in sneaker males of S. pavo. Sneakers were implanted either with KT or with control (i.e. castor oil) silastic implants. A week after implantation they were subjected to a set of behavioral tests and morphometric measurements. KT treatment promoted the differentiation of secondary sex characters, such as the anal glands, and inhibited the expression of female courtship behavior. KT-treated sneakers also showed a trend toward less frequent display of female nuptial coloration. There was no effect of KT treatment on the expression of typical nest-holder male behavior. Finally, there was no effect of KT treatment on the number or soma size of arginine vasotocin neurons in the preoptic area, which are often associated with the expression of vertebrate sexual behavior. Thus, KT seems to play a key role in mating tactic switching by inhibiting the expression of female courtship behavior and by promoting the development of male displaying traits (e.g. anal glands). The lack of a KT effect on behavior typical of nest-holding males and vasotocinergic preoptic neurons suggests that a longer time frame or other endocrine/social signals are needed for the initiation of these traits in males that are switching tactics.

Étude de l'impact de deux traitements, dont un sans antibiotiques, sur la santé digestive et les populations de Clostridium perfringens dans des élevages de poulets de chair.

Le problème grandissant de l’antibiorésistance remet en question plusieurs pratiques reliées à l’utilisation des antibiotiques, dont l’usage à grande échelle pour des fins de promotion de la croissance chez les animaux de consommation. Depuis 2006, le retrait des antibiotiques dans les élevages de poulets de chair en Europe a été associé à la résurgence d’entérite nécrotique, une maladie intestinale causée par la bactérie Clostridium perfringens. Alors que la pathogénie de la maladie semblait bien comprise, le retrait des antibiotiques a montré que peu de solutions de remplacement sont disponibles afin de prévenir cette maladie. Très peu d’études se sont intéressées à mieux caractériser la dynamique des populations de C. perfringens dans les élevages avicoles et l’effet que pouvait avoir le retrait des antibiotiques sur l’évolution de ces populations. La présente étude a évalué l’impact du remplacement des antibiotiques promoteurs de croissance et des anticoccidiens pendant une période de 14 mois, dans huit élevages commerciaux de poulets de chair au Québec. Un protocole d’élevage alternatif, combinant des stratégies telles que des produits à base d’huiles essentielles, des acides organiques et inorganique, une vaccination contre la coccidiose ainsi qu’une amélioration des conditions de démarrage des poussins, a été utilisé en remplacement des antimicrobiens. Les performances zootechniques, la santé digestive ainsi que l’occurrence d’entérite nécrotique pour les lots de poulets soumis au protocole d’élevage alternatif ont été comparées avec celles de lots de poulets de chair recevant une ration conventionnelle. Des analyses moléculaires basées sur la PCR et le PFGE ont été utilisées afin de documenter l’impact de la mise en place du protocole d’élevage alternatif sur les populations de C. perfringens. Les résultats obtenus montrent qu’aucune différence entre les groupes soumis aux deux types de protocoles n'est observée en ce qui a trait à la viabilité en élevage, à l'âge d'abattage et aux taux de condamnations à l'abattoir. Toutefois, les lots soumis au traitement alternatif ont eu des performances moindres pour le poids moyen à l'abattage, le gain moyen quotidien et la conversion alimentaire. Un peu plus de 27% des lots soumis au protocole alternatif ont connu un épisode d’entérite nécrotique clinique. Les analyses ont aussi montré que l’un ou l’autre des protocoles ne semble pas exercer d’influence particulière sur la dynamique temporelle des populations de C. perfringens. Pour les lots soumis au protocole d’élevage alternatif, une forte diversité génétique pour C. perfringens a été liée à un risque augmenté de vivre un épisode d’entérite nécrotique. À l’opposé, les lots alternatifs ayant vécu des épisodes récurrents de la maladie ont montré une diminution significative de la diversité génétique, ainsi qu’une augmentation marquée du nombre de souches de C. perfringens transportant plusieurs gènes de virulence. La présente étude a permis de mieux documenter, d’un point de vue économique et scientifique, la production de poulets de chair élevés sans antibiotiques ni anticoccidiens au Québec. Cette étude est la seule du genre s’étant intéressée à la caractérisation et à la comparaison dans le temps des flores de C. perfringens retrouvées dans les deux types d’élevages. Elle a révélé que la production à grande échelle de poulets de chair élevés sans antibiotiques ni anticoccidiens est possible au Québec, mais que celle-ci présente des impacts sur les performances zootechniques des oiseaux, sur leur santé digestive et sur la dynamique des populations de C. perfringens. Mots-clés : poulets de chair, antibiotiques, huiles essentielles, acides organiques, vaccination coccidiose, performances zootechniques, santé digestive, entérite nécrotique, Clostridium perfringens, dynamique populationnelle