Reprint: Learning With a Strategic Management Simulation Q2 Game: A Case Study

The use of simulation games as a pedagogic method is well established though its effective use is context-driven. This study adds to the increasing growing body of empirical evidence of the effectiveness of simulation games but more importantly emphasises why by explaining the instructional design implemented reflecting best practices. This multimethod study finds evidence that student learning was enhanced through the use of simulation games, reflected in the two key themes; simulation games as a catalyst for learning and simulation games as a vehicle for learning. In so doing the research provides one of the few empirically based studies that support simulation games in enhancing learning and, more importantly, contextualizes the enhancement in terms of the instructional design of the curriculum. This research should prove valuable for those with an academic interest in the use of simulation games and management educators who use, or are considering its use. Further, the findings contribute to the academic debate concerning the effective implementation of simulation game-based training in business and management education.

IT Adoption and Usage in Non-Profit Organizations: a Cross-generational Case Study

A gulf has tended to develop between the adoption and usage of information technology by different generations, at the heart of which is different ways of experiencing and relating to the world around us. This research idea is currently being developed following data collection and feedback is sought on ways forward to enable impact. The research focuses on information technology in the form of multimedia. Multimedia meaning ‘media’ and ‘content’ that uses a combination of different content forms; or electronically integrated communication engaging all or most of the senses (e.g. graphic art, sound, animation and full-motion video presented by way of computer or other electronic means) mainly through presentational technologies. Although multimedia is not new, some organization’s particularly those in the non-profit sector do not always have the technical or financial resources to support such systems and consequently may struggle to adopt and support its usage amongst different generations. However non-profit organizations are being forced to pay more attention to the way they communicate with markets and the public due to the professionalism of communication everywhere in society. The case study used for this study is a church circuit comprising of 15 churches in the Midlands region of the United Kingdom which was selected due to the diverse age groups catered for within this type of non-profit organization. Participants in the study also had a range of skills, experiences and backgrounds which adds to the diversity of the population studied. Data gathered focused on the attitudes and opinions of the adoption and use of multimedia amongst different age groups. 395 questionnaires were distributed, comprising of 11 opinion questions and 4 demographic questions. 83% of the questionnaires were returned, representing 35% of the total circuit membership. Three people from each of the following age categories were also interviewed: 1920 – 1946 (Matures); 1947-1964 (Baby Boomers); 1965-1982 (Generation X); 1983-2004 (Net Generation). Results of the questionnaire and comments from the interviews were found not to tally with the widespread assumption that the younger generation is attracted by the use of multimedia in comparison to the older generation. The highest proportion of those who said that they gain more from a service enhanced by multimedia was from the Baby Boomers. Comments from interviews suggested that: ‘we need to embrace multimedia if we are to attract and retain the younger generation’; ‘multimedia often helps children to remain focused and clarifies the objective of the service’. However, because the younger generations’ world tends to be dominated by computer technology the questionnaire showed that they are more likely to have higher standards when it comes to the use of multimedia, such as identifying higher levels of equipment failing to work and annoying use of sounds compared to older age groups. In comparison problems experienced with multimedia for the Matures age group had the highest percentage of difficulty with the size of letters; the colour of letters and background and the sound not loud enough which is to be expected. Since every organization is unique any type of multimedia adopted and used should be specific to their needs, its stakeholders and the physical building in order to enhance that uniqueness and its needs. Giving thought to whether the type of multimedia is the best method for communicating the message to the particular audience alongside how technical and financial resources are best used can assist in accommodating different age groups that need to be catered for.

Using crowdsourced imagery to detect cultural ecosystem services: a case study in South Wales, UK

Within ecological research and environmental management, there is currently a focus on demonstrating the links between human well-being and wildlife conservation. Within this framework, there is a clear interest in better understanding how and why people value certain places over others. We introduce a new method that measures cultural preferences by exploring the potential of multiple online georeferenced digital photograph collections. Using ecological and social considerations, our study contributes to the detection of places that provide cultural ecosystem services. The degree of appreciation of a specific place is derived from the number of people taking and sharing pictures of it. The sequence of decisions and actions taken to share a digital picture of a given place includes the effort to travel to the place, the willingness to take a picture, the decision to geolocate the picture, and the action of sharing it through the Internet. Hence, the social activity of sharing pictures leaves digital proxies of spatial preferences, with people sharing specific photos considering the depicted place not only “worth visiting” but also “worth sharing visually.” Using South Wales as a case study, we demonstrate how the proposed methodology can help identify key geographic features of high cultural value. These results highlight how the inclusion of geographical user-generated content, also known as volunteered geographic information, can be very effective in addressing some of the current priorities in conservation. Indeed, the detection of the most appreciated nonurban areas could be used for better prioritization, planning, and management.

Exploring the feasibility of applying data mining for library reference service improvement : a case study of Turku Main Library

Data mining, as a heatedly discussed term, has been studied in various fields. Its possibilities in refining the decision-making process, realizing potential patterns and creating valuable knowledge have won attention of scholars and practitioners. However, there are less studies intending to combine data mining and libraries where data generation occurs all the time. Therefore, this thesis plans to fill such a gap. Meanwhile, potential opportunities created by data mining are explored to enhance one of the most important elements of libraries: reference service. In order to thoroughly demonstrate the feasibility and applicability of data mining, literature is reviewed to establish a critical understanding of data mining in libraries and attain the current status of library reference service. The result of the literature review indicates that free online data resources other than data generated on social media are rarely considered to be applied in current library data mining mandates. Therefore, the result of the literature review motivates the presented study to utilize online free resources. Furthermore, the natural match between data mining and libraries is established. The natural match is explained by emphasizing the data richness reality and considering data mining as one kind of knowledge, an easy choice for libraries, and a wise method to overcome reference service challenges. The natural match, especially the aspect that data mining could be helpful for library reference service, lays the main theoretical foundation for the empirical work in this study. Turku Main Library was selected as the case to answer the research question: whether data mining is feasible and applicable for reference service improvement. In this case, the daily visit from 2009 to 2015 in Turku Main Library is considered as the resource for data mining. In addition, corresponding weather conditions are collected from Weather Underground, which is totally free online. Before officially being analyzed, the collected dataset is cleansed and preprocessed in order to ensure the quality of data mining. Multiple regression analysis is employed to mine the final dataset. Hourly visits are the independent variable and weather conditions, Discomfort Index and seven days in a week are dependent variables. In the end, four models in different seasons are established to predict visiting situations in each season. Patterns are realized in different seasons and implications are created based on the discovered patterns. In addition, library-climate points are generated by a clustering method, which simplifies the process for librarians using weather data to forecast library visiting situation. Then the data mining result is interpreted from the perspective of improving reference service. After this data mining work, the result of the case study is presented to librarians so as to collect professional opinions regarding the possibility of employing data mining to improve reference services. In the end, positive opinions are collected, which implies that it is feasible to utilizing data mining as a tool to enhance library reference service.

Structured decision making as a tool for facilitating stakeholder engagement in non-renewable resource management: using the case study of hydraulic fracturing in the Green Point Shale formation in western Newfoundland

This thesis examines the importance of effective stakeholder engagement that complies with the doctrines of social justice in non-renewable resources management decision-making. It uses hydraulic fracturing in the Green Point Shale Formation in Western Newfoundland as a case study. The thesis uses as theoretical background John Rawls’ and David Miller’ theory of social justice, and identifies the social justice principles, which are relevant to stakeholder engagement. The thesis compares the method of stakeholder engagement employed by the Newfoundland and Labrador Hydraulic Fracturing Review Panel (NLHFRP), with the stakeholder engagement techniques recommended by the Structured Decision Making (SDM) model, as applied to a simulated case study involving hydraulic fracturing in the Green Point Shale Formation. Using the already identified social justice principles, the thesis then developed a framework to measure the level of compliance of both stakeholder engagement techniques with social justice principles. The main finding of the thesis is that the engagement techniques prescribed by the SDM model comply more closely with the doctrines of social justice than the engagement techniques applied by the NLHFRP. The thesis concludes by recommending that the SDM model be more widely used in non- renewable resource management decision making in order to ensure that all stakeholders’ concerns are effectively heard, understood and transparently incorporated in the nonrenewable resource policies to make them consistent with local priorities and goals, and with the social justice norms and institutions.

EXAMINING THE IMPLEMENTATION CHALLENGES OF PROJECT-BASED LEARNING: A CASE STUDY

Title of Thesis: Thesis directed by: ABSTRACT EXAMINING THE IMPLEMENTATION CHALLENGES OF PROJECT-BASED LEARNING: A CASE STUDY Stefan Frederick Brooks, Master of Education, 2016 Professor and Chair Francine Hultgren Teaching and Learning, Policy and Leadership Department Project-based learning (PjBL) is a common instructional strategy to consider for educators, scholars, and advocates who focus on education reform. Previous research on PjBL has focused on its effectiveness, but a limited amount of research exists on the implementation challenges. This exploratory case study examines an attempted project- based learning implementation in one chemistry classroom at a private school that fully supports PjBL for most subjects with limited use in mathematics. During the course of the study, the teacher used a modified version of PjBL. Specifically, he implemented some of the elements of PjBL, such as a driving theme and a public presentation of projects, with the support of traditional instructional methods due to the context of the classroom. The findings of this study emphasize the teacher’s experience with implementing some of the PjBL components and how the inherent implementation challenges affected his practice.

Preparation of environmental monitoring plan pattern for surface water quality in Iran (Case study: Gharehsou River)

Using water quality management programs is a necessary and inevitable way for preservation and sustainable use of water resources. One of the important issues in determining the quality of water in rivers is designing effective quality control networks, so that the measured quality variables in these stations are, as far as possible, indicative of overall changes in water quality. One of the methods to achieve this goal is increasing the number of quality monitoring stations and sampling instances. Since this will dramatically increase the annual cost of monitoring, deciding on which stations and parameters are the most important ones, along with increasing the instances of sampling, in a way that shows maximum change in the system under study can affect the future decision-making processes for optimizing the efficacy of extant monitoring network, removing or adding new stations or parameters and decreasing or increasing sampling instances. This end, the efficiency of multivariate statistical procedures was studied in this thesis. Multivariate statistical procedure, with regard to its features, can be used as a practical and useful method in recognizing and analyzing rivers’ pollution and consequently in understanding, reasoning, controlling, and correct decision-making in water quality management. This research was carried out using multivariate statistical techniques for analyzing the quality of water and monitoring the variables affecting its quality in Gharasou river, in Ardabil province in northwest of Iran. During a year, 28 physical and chemical parameters were sampled in 11 stations. The results of these measurements were analyzed by multivariate procedures such as: Cluster Analysis (CA), Principal Component Analysis (PCA), Factor Analysis (FA), and Discriminant Analysis (DA). Based on the findings from cluster analysis, principal component analysis, and factor analysis the stations were divided into three groups of highly polluted (HP), moderately polluted (MP), and less polluted (LP) stations Thus, this study illustrates the usefulness of multivariate statistical techniques for analysis and interpretation of complex data sets, and in water quality assessment, identification of pollution sources/factors and understanding spatial variations in water quality for effective river water quality management. This study also shows the effectiveness of these techniques for getting better information about the water quality and design of monitoring network for effective management of water resources. Therefore, based on the results, Gharasou river water quality monitoring program was developed and presented.

Using importance-satisfaction analysis in evaluating student satisfaction: a case study of economics and administration Faculty of Qafqaz University

Education is one of the main industries in the world, which needs to focus more than other types of industries. As Mandela said, “Education is the most powerful weapon, which you can use to change the world” (www.brainyquote.com). Global economic recession era put serious pressure on private Higher Education Institutions (HEI), which resulted as decrease in the university spending`s budget. Therefore, HEI forced to develop more competitive ways to find new financial resources for rapid technological and organizational changes (Savsar, 2012). Students are the motive of being of Higher Education. The aim of this study is to implement İmportance-Satisfaction Analysis (IPA) matrix to evaluate the student`s satisfaction and assess importance of different attributes in terms of student`s perception. The students that participated in this study enrolled in the present academic year, 2015/2016, in the Economics and Administration Faculty-Qafqaz University. In order to perform study, survey method applied to collect the data and number of received valid questionnaire were 266. Questionnaire used to collect demographic information of students, identify importance given to each attribute and satisfaction degree of each attribute. Descriptive analysis used to identify profile of respondents, also find satisfaction and importance degree for each attributes. To evaluate differences between groups, built association between variables, find relation between variables and answering to the research hypothesis inferential analysis applied. Moreover, IPA matrix was been used to explore the attributes that needs improvement that perceived as attributes that are more important for the students. The result showed that generally students are satisfied with service quality offered by HEI-on sample of the Qafqaz University. In addition, research found that there are no differences in overall satisfaction and importance by department, gender, academic year and grade point average. IPA matrix highlighted the main attributes, which performs well, namely Academic Services and Teaching aspects, and in another hand needs to concentrate in Undergraduate program and External Relations. In addition, research found that loyalty of students is very low and there is a negative correlation between loyalty and satisfaction.

Augmented Dissent: The Affordances of ICTs for Citizen Protest (A Case Study of the Ukraine Euromaidan Protests of 2013-2014).

This dissertation research project uses the Euromaidan protests in Ukraine to inform and shape a theory of augmented dissent to help explain the complex ways in which protest participants guided by the political, social, and cultural contexts engage in dissent augmented by ICTs in a reality where both the physical and the digital are used in concert. The purpose of this research is to conceptualize the use and perception of ICTs in protest activity using the communicative affordances framework. Through a mixed-method research approach involving interviews with protest participants, as well as qualitative and thematic analysis of online content from social media pages of several key Euromaidan protest communities, the research project examines the role ICTs played in the information and media landscape during the Euromaidan protest. The findings of the online content analysis were used to inform the questions for the 59 semi-structured, open-ended interviews with Euromaidan protest participants in Ukraine and abroad. The research findings provide in-depth insights about how ICTs were used and perceived by protest participants, and their role as vehicles for information and civic media content. The study employs the theoretical framework of social media affordances to interpret the data gathered during the interviews and content analysis to better understand how digital media augmented citizens’ protest activity through affording them new possibilities for dissent, and how they made meaning of said protest activity as augmented by ICTs. The findings contribute towards shaping a theory of digitally augmented dissent that conceptualizes the complex relationship between citizens and ICTs during protest activity as an affordance-driven one, where online and offline tools and activity merge into a unified dissent space and extend or augment the possibilities for action in interesting, and sometimes unexpected ways. Such a conceptual model could inform broader theories about civic participation and digital activism in the post-Soviet world and beyond, as ICTs become an inseparable part of civic life.

Science parks and university-industry links: a case-study of the surrey research park.

Doutoramento em Economia.

INCORPORATING STIMULATING QUICK-WRITE PROMPTS WITHIN A SECONDARY SCIENCE CLASSROOM: A CASE STUDY IN LESOTHO

The use of intriguing open-ended quick-write prompts within the Basotho science classroom could potentially provide a way for secondary teachers in Lesotho to have a time-efficient alternative to stimulate student thinking and increase critical thinking or application of scientific principles. Writing can be used as a powerful means to improve the achievement of students across many subject areas, including the sciences (Moore, 1993; Rivard, 1994; Rillero, Zambo, Cleland, and Ryan, 1996; Greenstein, 2013). This study focuses on the use of a non-traditional nor extensively studied writing method that could potentially support learning in science. A quasi-experimental research design, with a control and experimental group, was applied. The study was conducted at two schools, with one experimental classroom in one school and a second control group classroom in the second school for a period of 4 weeks. 51 Form B (US Grade 9 equivalent) students participated as the experimental group and 43 Form B students as the control group. In an effort to assess learning achievement, a 1 hour (35 mark) pre-test evaluation was made by and given to students by Basotho teachers at the beginning of this study to have an idea of student’s previous knowledge. Topics covered were Static Electricity, Current Electricity, Electromagnetic Waves, and Chemistry of Water. After the experimental trial period, an almost completely identical post-test evaluation was given to students in the same fashion to observe and compare gains in achievement. Test data was analyzed using an inferential statistics procedure that compared means and gains in knowledge made by the experimental and control groups. Difference between the gains of mean pre-test and post-test scores were statistically significant within each group, but were not statistically significant when the control and experimental groups were compared. Therefore, there was no clear practical effect. Qualitative data from teachers’ journals and students’ written feedback provides insight on the assessments, incorporation of the teaching method, and the development of participating students. Both mid and post-study student feedback shows that students had an overall positive and beneficial experience participating in this activity. Assessments and teacher journals showed areas of strength and weaknesses in student learning and on differences in teaching styles. They also helped support some feedback claims made by students. Areas of further research and improvement of the incorporation of this teaching method in the Basotho secondary science classroom are explored.

Examining Levels of Automation in the Wood Processing Industry - A case study

Companies operating in the wood processing industry need to increase their productivity by implementing automation technologies in their production systems. An increasing global competition and rising raw material prizes challenge their competitiveness. Yet, too extensive automation brings risks such as a deterioration in situation awareness and operator deskilling. The concept of Levels of Automation is generally seen as means to achieve a balanced task allocation between the operators’ skills and competences and the need for automation technology relieving the humans from repetitive or hazardous work activities. The aim of this thesis was to examine to what extent existing methods for assessing Levels of Automation in production processes are applicable in the wood processing industry when focusing on an improved competitiveness of production systems. This was done by answering the following research questions (RQ): RQ1: What method is most appropriate to be applied with measuring Levels of Automation in the wood processing industry? RQ2: How can the measurement of Levels of Automation contribute to an improved competitiveness of the wood processing industry’s production processes? Literature reviews were used to identify the main characteristics of the wood processing industry affecting its automation potential and appropriate assessment methods for Levels of Automation in order to answer RQ1. When selecting the most suitable method, factors like the relevance to the target industry, application complexity or operational level the method is penetrating were important. The DYNAMO++ method, which covers both a rather quantitative technical-physical and a more qualitative social-cognitive dimension, was seen as most appropriate when taking into account these factors. To answer RQ 2, a case study was undertaken at a major Swedish manufacturer of interior wood products to point out paths how the measurement of Levels of Automation contributes to an improved competitiveness of the wood processing industry. The focus was on the task level on shop floor and concrete improvement suggestions were elaborated after applying the measurement method for Levels of Automation. Main aspects considered for generalization were enhancements regarding ergonomics in process design and cognitive support tools for shop-floor personnel through task standardization. Furthermore, difficulties regarding the automation of grading and sorting processes due to the heterogeneous material properties of wood argue for a suitable arrangement of human intervention options in terms of work task allocation.  The application of a modified version of DYNAMO++ reveals its pros and cons during a case study which covers a high operator involvement in the improvement process and the distinct predisposition of DYNAMO++ to be applied in an assembly system.

Data privacy in interoperability environments – a case study in the Portuguese healthcare sector

Data sharing between organizations through interoperability initiatives involving multiple information systems is fundamental to promote the collaboration and integration of services. However, in terms of data, the considerable increase in its exposure to additional risks, require a special attention to issues related to privacy of these data. For the Portuguese healthcare sector, where the sharing of health data is, nowadays, a reality at national level, data privacy is a central issue, which needs solutions according to the agreed level of interoperability between organizations. This context led the authors to study the factors with influence on data privacy in a context of interoperability, through a qualitative and interpretative research, based on the method of case study. This article presents the final results of the research that successfully identifies 10 subdomains of factors with influence on data privacy, which should be the basis for the development of a joint protection program, targeted at issues associated with data privacy.

Pitfalls of artificial grouping and stratification of scientific journals based on their Impact Factor: a case study in Brazilian Zoology

The present contribution explores the impact of the QUALIS metric system for academic evaluation implemented by CAPES (Coordination for the Development of Personnel in Higher Education) upon Brazilian Zoological research. The QUALIS system is based on the grouping and ranking of scientific journals according to their Impact Factor (IF). We examined two main points implied by this system, namely: 1) its reliability as a guideline for authors; 2) if Zoology possesses the same publication profile as Botany and Oceanography, three fields of knowledge grouped by CAPES under the subarea "BOZ" for purposes of evaluation. Additionally, we tested CAPES' recent suggestion that the area of Ecology would represent a fourth field of research compatible with the former three. Our results indicate that this system of classification is inappropriate as a guideline for publication improvement, with approximately one third of the journals changing their strata between years. We also demonstrate that the citation profile of Zoology is distinct from those of Botany and Oceanography. Finally, we show that Ecology shows an IF that is significantly different from those of Botany, Oceanography, and Zoology, and that grouping these fields together would be particularly detrimental to Zoology. We conclude that the use of only one parameter of analysis for the stratification of journals, i.e., the Impact Factor calculated for a comparatively small number of journals, fails to evaluate with accuracy the pattern of publication present in Zoology, Botany, and Oceanography. While such simplified procedure might appeals to our sense of objectivity, it dismisses any real attempt to evaluate with clarity the merit embedded in at least three very distinct aspects of scientific practice, namely: productivity, quality, and specificity.