THE TRANSPORT OF HEAT BY FLOWING GROUNDWATER IN A DISCRETE FRACTURE

In typical theoretical or experimental studies of heat migration in discrete fractures, conduction and thermal dispersion are commonly neglected from the fracture heat transport equation, assuming heat conduction into the matrix is predominant. In this study analytical and numerical models are used to investigate the significance of conduction and thermal dispersion in the plane of the fracture for a point and line sources geometries. The analytical models account for advective, conductive and dispersive heat transport in both the longitudinal and transverse directions in the fracture. The heat transport in the fracture is coupled with a matrix equation in which heat is conducted in the direction perpendicular to the fracture. In the numerical model, the governing heat transport processes are the same as the analytical models; however, the matrix conduction is considered in both longitudinal and transverse directions. Firstly, we demonstrate that longitudinal conduction and dispersion are critical processes that affect heat transport in fractured rock environments, especially for small apertures (eg. 100 μm or less), high flow rate conditions (eg. velocity greater than 50 m/day) and early time (eg. less than 10 days). Secondly, transverse thermal dispersion in the fracture plane is also observed to be an important transport process leading to retardation of the migrating heat front particularly at late time (eg. after 40 days of hot water injection). Solutions which neglect dispersion in the transverse direction underestimate the locations of heat fronts at late time. Finally, this study also suggests that the geometry of the heat sources has significant effects on the heat transport in the system. For example, the effects of dispersion in the fracture are observed to decrease when the width of the heat source expands.

Surgical exposures and options for instrumentation in acetabular fracture fixation: Pararectus approach versus the modified Stoppa.

BACKGROUND As an alternative to the modified Stoppa approach, the Pararectus approach is used clinically for treatment of acetabular fractures involving the anterior column. The current study assessed the surgical exposure and the options for instrumentation using both of these approaches. METHODS Surgical dissections were conducted on five human cadavers (all male, mean age 88 years (82-97)) using the modified Stoppa and the Pararectus approach, with the same skin incision length (10cm). Distal boundaries of the exposed bony surfaces were marked using a chisel. After removal of all soft-tissues, distances from the boundaries in the false and true pelvis were measured with reference to the pelvic brim. The exposed bone was coloured and calibrated digital images of each inner hemipelvis were taken. The amount of exposed surface using both approaches was assessed and represented as a percentage of the total bony surface of each hemipelvis. For instrumentation, a suprapectineal quadrilateral buttress plate was used. Screw lengths were documented, and three-dimensional CT reconstructions were performed to assess screw trajectories qualitatively. Wilcoxon's signed rank test for paired groups was used (level of significance: p<0.05). RESULTS After utilization of the Pararectus approach, the distances from the farthest boundaries of exposed bone towards the pelvic brim were significantly higher in the false but not the true pelvis, compared to the modified Stoppa approach. The percentage (mean±SD) of exposed bone accessible after utilizing the Pararectus approach was 42±8%, compared to 29±6% using the modified Stoppa (p=0.011). In cadavers exposed by the Pararectus approach, screws placed for posterior fixation and as a posterior column screw were longer by factor 1.8 and 2.1, respectively (p<0.05), and screws could be placed more posteromedial towards the posterior inferior iliac spine or in line with the posterior column directed towards the ischial tuberosity. CONCLUSION Compared to the modified Stoppa, the Pararectus approach facilitates a greater surgical access in the false pelvis, provides versatility for fracture fixation in the posterior pelvic ring and allows for the option to extend the approach without a new incision.

Vehicular crash test of a continuous concrete median barrier without a footing. Final report.

Federal Highway Administration, Washington, D.C.

Measurement of glass-rubber transition temperature of skim milk powder by static mechanical test

Stickiness behavior of skim milk powder was investigated based on the mechanical property of the material during the glass-rubber transition. A thermally controlled device was developed for the static mechanical test. This device was attached to a texture analyzer, and skim milk powder, which was used as a model sample, was tested for its glass-rubber transition temperature (Tg-r) using static compression technique (creep test). Changes in compression probe distance as a function of temperature were recorded. Tg-r was determined, in the region where changes in the probe distance were observed, by using linear regression technique. The effect of sample quantity, compression force, and heating rate on the determination of Tg-r was investigated. All these parameters significantly influenced the Tg-r determination (p < 0.05). The Tg-r of skim milk powder measured by this novel technique was found closely correlated to its glass transition temperature (T-g) measured by DSC.

Fracture load and marginal fit of shrinkage-free ZrSiO4 all-ceramic crowns after chewing simulation

The aim of this in vitro study was to evaluate the fracture load and marginal accuracy of crowns made from a shrinkage-free ZrSiO4 ceramic cemented with glass-ionomer or composite cement after chewing simulation. Thirty-two human mandibular molars were randomly divided into two groups. All teeth were prepared for and restored with shrinkage-free ZrSiO4 ceramic crowns (Everest HPC (R), KaVo). The crowns of group A (N = 16) were luted to the teeth using KetacCem (R) and group B (N = 16) were adhesively cemented using Panavia (R) 21EX. Measurements of the marginal accuracy before and after cementation were made using replicas and an image analysis system. All specimens were exposed to 1.2 million cycles of thermo-mechanical fatigue in a chewing simulator. Surviving specimens were subsequently loaded until fracture in a static testing device. Fracture loads (N) were recorded. All specimens survived chewing simulation. The mean fracture loads (+/- s.d.) were Group A, 1622 N (+/- 433); group B, 1957 N (+/- 806). There was no significant difference between the two groups (P > 0.05). The marginal gap values before cementation were (mean +/- s.d.): Group A, 32.7 mu m (+/- 6.8); group B, 33.0 mu m (+/- 6.7).The mean marginal gap values after cementation were (+/- s.d.): Group A, 44.6 mu m (+/- 6.7); group B, 46.6 mu m (+/- 7.7). The marginal openings were significantly higher after cementation for both groups (P < 0.05). All test groups demonstrated fracture load and marginal accuracy values within the range of clinical acceptability.

Mechanistic modeling of fracture in asphalt mixtures under compressive loading

When an asphalt mixture is subjected to a destructive compressive load, it experiences a sequence of three deformation stages, as follows: the (1) primary, (2) secondary, and (3) tertiary stages. Most literature research focuses on plastic deformation in the primary and secondary stages, such as prediction of the flow number, which is in fact the initiation of the tertiary stage. However, little research effort has been reported on the mechanistic modeling of the damage that occurs in the tertiary stage. The main objective of this paper is to provide a mechanistic characterizing method for the damage modeling of asphalt mixtures in the tertiary stage. The preliminary study conducted by the writers illustrates that deformation during the tertiary flow of the asphalt mixtures is principally caused by the formation and propagation of cracks, which was signaled by the increase of the phase angle in the tertiary phase. The strain caused by the growth of cracks is the viscofracture strain, which can be obtained by conducting the strain decomposition of the measured total strain in the destructive compressive test. The viscofracture strain is employed in the research reported in this paper to mechanistically characterize the time-dependent fracture (viscofracture) of asphalt mixtures in compression. By using the dissipated pseudostrain energy-balance principle, the damage density and true stress are determined and both are demonstrated to increase with load cycles in the tertiary stage. The increased true stress yields extra viscoplastic strain, which is the reason why the permanent deformation is accelerated by the occurrence of cracks. To characterize the evolution of the viscofracture in the asphalt mixtures in compression, a pseudo J-integral Paris' law in terms of damage density is proposed and the material constants in the Paris' law are determined, which can be employed to predict the fracture of asphalt mixtures in compression. © 2013 American Society of Civil Engineers.

Energy-based damage and fracture framework for viscoelastic asphalt concrete

A framework based on the continuum damage mechanics and thermodynamics of irreversible processes using internal state variables is used to characterize the distributed damage in viscoelastic asphalt materials in the form of micro-crack initiation and accumulation. At low temperatures and high deformation rates, micro-cracking is considered as the source of nonlinearity and thus the cause of deviation from linear viscoelastic response. Using a non-associated damage evolution law, the proposed model shows the ability to describe the temperature-dependent processes of micro-crack initiation, evolution and macro-crack formation with good comparison to the material response in the Superpave indirect tensile (IDT) strength test.

Interpretation of the Superpave IDT strength test using a viscoelastic-damage constitutive model

This paper presents a new interpretation for the Superpave IDT strength test based on a viscoelastic-damage framework. The framework is based on continuum damage mechanics and the thermodynamics of irreversible processes with an anisotropic damage representation. The new approach introduces considerations for the viscoelastic effects and the damage accumulation that accompanies the fracture process in the interpretation of the Superpave IDT strength test for the identification of the Dissipated Creep Strain Energy (DCSE) limit from the test result. The viscoelastic model is implemented in a Finite Element Method (FEM) program for the simulation of the Superpave IDT strength test. The DCSE values obtained using the new approach is compared with the values obtained using the conventional approach to evaluate the validity of the assumptions made in the conventional interpretation of the test results. The result shows that the conventional approach over-estimates the DCSE value with increasing estimation error at higher deformation rates.

The effects of intellectual property rights on knowledge spillovers and innovation: An empirical investigation

FDI is believed to be a conduit of new technologies between countries. The first chapter of this dissertation studies the advantages of outward FDI for the home country of multinationals conducting research and development abroad. We use patent citations as a proxy for technology spillovers and we bring empirical evidence that supports the hypothesis that a U.S. subsidiary conducting research and development overseas facilitates the flow of knowledge between its host and home countries.^ The second chapter examines the impact of intellectual property rights (IPR) reforms on the technology flows between the U.S. and host countries of U.S. affiliates. We again use patent citations to examine whether the diffusion of new technology between the host countries and the U.S. is accelerated by the reforms. Our results suggest that the reforms favor innovative efforts of domestic firms in the reforming countries rather than U.S. affiliates efforts. In other words, reforms mediate the technology flows from the U.S. to the reforming countries.^ The third chapter deals with another form of IPR, open source (OS) licenses. These differ in the conditions under which licensors and OS contributors are allowed to modify and redistribute the source code. We measure OS project quality by the speed with which programming bugs are fixed and test whether the license chosen by project leaders influences bug resolution rates. In initial regressions, we find a strong correlation between the hazard of bug resolution and the use of highly restrictive licenses. However, license choices are likely to be endogenous. We instrument license choice using (i) the human language in which contributors operate and (ii) the license choice of the project leaders for a previous project. We then find weak evidence that restrictive licenses adversely affect project success.^

Estudo da incorporação de cinza e chamote gerado pela cerâmica vermelha ao próprio processo industrial

The ceramics industry generates waste at various stages of that process, defective products, waste from burning solid fuels, among others. This waste is dumped in landfills, garbage dumps or directly on roads, which has a negative environmental impact. This paper presents a study to incorporate the waste of algaroba wood and chamote (scrap pieces of ceramic already sintered), in to the ceramic material for making sealing blocks. The methodological procedures consist in the characterization of chemical and mineralogical residues, raw materials, and physical-mechanical of the formulations of mixes with clay, silt and waste. By pressing test pieces were produced using a pressure of 200 kgf/cm², varying compositions in the range of 0%, 5%, 10% and 15% by weight of residue. The sintering was performed in a muffle furnace, with the temperature levels of 850 ° C, 900 ° C, 950 ° C, 1000 ° C and 1050 ° C. The evaluated physical and mechanical properties were: Water Absorption, Linear Shrinkage Burning, Apparent Porosity, Apparent Density and Mechanical Resistance to Flexion. Analysis was carried out by Scanning Electron Microscopy on fracture surfaces of the specimens. Evaluation of linear shrinkage property drying and firing , water absorption and mechanical resistance to compression of the sealing blocks 5% wood ash residue, sintered at 900 °C hold temperature in the laboratory the products manufactured on an industrial scale. The main results, it was found on the viability of using the residues of algaroba wood and to confer refractory properties of the ceramic product. The main results, it was concluded feasibility of using the ash residues algaroba wood to impart refractory properties to the ceramic product and the residue of chamote, being derived from the own ceramic product not interfere with the properties, when used in a percentage of up to 5%.Since the residue of chamote being derived from the ceramic product itself had no effect on the properties. Studies in the laboratory have shown that the incorporation of up to 5% of these residues may be adopted as an alternative technology to reduce the environmental impact caused by the industrial sector, without compromising the final properties of the material, since the results on an industrial scale showed absorption values 11.66 and 11.74 of water and waste products respectively, within the parameters of NBR - 15,270, since the mechanical strength was 1.25 MPa and 0.94 MPa respectively for products with and without residue, lower than the minimum required by the technical standard that is 1.5 MPa.

Estudo da incorporação de cinza e chamote gerado pela cerâmica vermelha ao próprio processo industrial

The ceramics industry generates waste at various stages of that process, defective products, waste from burning solid fuels, among others. This waste is dumped in landfills, garbage dumps or directly on roads, which has a negative environmental impact. This paper presents a study to incorporate the waste of algaroba wood and chamote (scrap pieces of ceramic already sintered), in to the ceramic material for making sealing blocks. The methodological procedures consist in the characterization of chemical and mineralogical residues, raw materials, and physical-mechanical of the formulations of mixes with clay, silt and waste. By pressing test pieces were produced using a pressure of 200 kgf/cm², varying compositions in the range of 0%, 5%, 10% and 15% by weight of residue. The sintering was performed in a muffle furnace, with the temperature levels of 850 ° C, 900 ° C, 950 ° C, 1000 ° C and 1050 ° C. The evaluated physical and mechanical properties were: Water Absorption, Linear Shrinkage Burning, Apparent Porosity, Apparent Density and Mechanical Resistance to Flexion. Analysis was carried out by Scanning Electron Microscopy on fracture surfaces of the specimens. Evaluation of linear shrinkage property drying and firing , water absorption and mechanical resistance to compression of the sealing blocks 5% wood ash residue, sintered at 900 °C hold temperature in the laboratory the products manufactured on an industrial scale. The main results, it was found on the viability of using the residues of algaroba wood and to confer refractory properties of the ceramic product. The main results, it was concluded feasibility of using the ash residues algaroba wood to impart refractory properties to the ceramic product and the residue of chamote, being derived from the own ceramic product not interfere with the properties, when used in a percentage of up to 5%.Since the residue of chamote being derived from the ceramic product itself had no effect on the properties. Studies in the laboratory have shown that the incorporation of up to 5% of these residues may be adopted as an alternative technology to reduce the environmental impact caused by the industrial sector, without compromising the final properties of the material, since the results on an industrial scale showed absorption values 11.66 and 11.74 of water and waste products respectively, within the parameters of NBR - 15,270, since the mechanical strength was 1.25 MPa and 0.94 MPa respectively for products with and without residue, lower than the minimum required by the technical standard that is 1.5 MPa.

Ownership control of foreign affiliates:a property rights theory perspective

This paper applies property rights theory to explain changes in foreign affiliates’ ownership. Post-entry ownership change is driven by both firm-level characteristics and by the differences in the institutional environments in host countries. We distinguish between financial market development and the level of corruption as two different institutional dimensions, such that changes along these dimensions impact upon ownership change in different ways. Furthermore, we argue that changes in ownership are affected by the foreign affiliate’s relatedness with its parent’s sector, as well as by the affiliate’s maturity. We use firm level data across 125 host countries to test our hypotheses.

Proving My Competency One Test at a Time: Internationally Educated Nurses and the Canadian English Language Benchmark Assessment for Nurses

Abstract Professional language assessment is a new concept that has great potential to benefit Internationally Educated Professionals and the communities they serve. This thesis reports on a qualitative study that examined the responses of 16 Canadian English Language Benchmark Assessment for Nurses (CELBAN) test-takers on the topic of their perceptions of the CELBAN test-taking experience in Ontario in the winter of 2015. An Ontario organization involved in registering participants distributed an e-mail through their listserv. Thematic analyses of focus group and interview transcripts identified 7 themes from the data. These themes were used to inform conclusions to the following questions: (1) How do IENs characterize their assessment experience? (2) How do IENs describe the testing constructs measured by the CELBAN? (3) What, if any, potential sources of construct irrelevant variance (CIV) do the test-takers describe based on their assessment experience? (4) Do IENs feel that the CELBAN tasks provide a good reflection of the types of communicative tasks required of a nurse? Overall, participants reported positive experiences with the CELBAN as an assessment of their language skills, and noted some instances in which they felt some factors external to the assessment impacted their demonstration of their knowledge and skill. Lastly, some test-takers noted the challenge of completing the CELBAN where the types of communicative nursing tasks included in the assessment differed from nursing tasks typical of an IENs country or origin. The findings are discussed in relation to literature on high-stakes large-scale assessment and IEPs, and a set of recommendations are offered to future CELBAN administration. These recommendations include (1) the provision of a webpage listing all licensure requirements (2) monitoring of CELBAN location and dates in relation to the wider certification timeline for applicants (3) The provision of additional CELBAN preparatory materials (4) Minor changes to the CELBAN administrative protocols. Given that the CELBAN is a relatively new assessment format and its widespread use for high-stakes decisions (a component of nursing certification and licensure), research validating IEN-test-taker responses to construct representation and construct irrelevant variance is critical to our understanding of the role of competency testing for IENs.

UNDERSTANDING ESSAY RATING AS A SOCIALLY MEDIATED ACTIVITY: THE CASE OF A HIGH-STAKES ENGLISH TEST IN CHINA

Most essay rating research in language assessment has examined human raters’ essay rating as a cognitive process, thus overlooking or oversimplifying the interaction between raters and sociocultural contexts. Given that raters are social beings, their practices have social meanings and consequences. Hence it is important to situate essay rating within its sociocultural context for a more meaningful understanding. Drawing on Engeström’s (1987, 2001) cultural-historical activity theory (CHAT) framework with a sociocultural perspective, this study reconceptualized essay rating as a socially mediated activity with both cognitive (individual raters’ goal-directed decision-making actions) and social layers (raters’ collective object-oriented essay rating activity at related settings). In particular, this study explored raters’ essay rating at one provincial rating centre in China within the context of a high-stakes university entrance examination, the National Matriculation English Test (NMET). This study adopted a multiple-method multiple-perspective qualitative case study design. Think-aloud protocols, stimulated recalls, interviews, and documents served as the data sources. This investigation involved 25 participants at two settings (rating centre and high schools), including rating centre directors, team leaders, NMET essay raters who were high school teachers, and school principals and teaching colleagues of these essay raters. Data were analyzed using Strauss and Corbin’s (1990) open and axial coding techniques, and CHAT for data integration. The findings revealed the interaction between raters and the NMET sociocultural context. Such interaction can be understood through a surface structure (cognitive layer) and a deep structure (social layer) concerning how raters assessed NMET essays, where the surface structure reflected the “what” and the deep structure explained the “how” and “why” in raters’ decision-making. This study highlighted the roles of goals and rules in rater decision-making, rating tensions and raters’ solutions, and the relationship between essay rating and teaching. This study highlights the value of a sociocultural view to essay rating research, demonstrates CHAT as a sociocultural approach to investigate essay rating, and proposes a direction for future washback research on the effect of essay rating. This study also provides support for NMET rating practices that can potentially bring positive washback to English teaching in Chinese high schools.