Effects of computer-mediated communication and face-to-face communication on the quantity and quality of discourse produced by English as a second language students /

The effects oftwo types of small-group communication, synchronous computer-mediated and face-to-face, on the quantity and quality of verbal output were con^ared. Quantity was deiSned as the number of turns taken per minute, the number of Analysis-of-Speech units (AS-units) produced per minute, and the number ofwords produced per minute. Quality was defined as the number of words produced per AS-unit. In addition, the interaction of gender and type of communication was explored for any differences that existed in the output produced. Questionnaires were also given to participants to determine attitudes toward computer-mediated and face-to-face communication. Thirty intermediate-level students fi-om the Intensive English Language Program (lELP) at Brock University participated in the study, including 15 females and 15 males. Nonparametric tests, including the Wilcoxon matched-pairs test, Mann-Whitney U test, and Friedman test were used to test for significance at the p < .05 level. No significant differences were found in the effects of computer-mediated and face-to-face communication on the output produced during follow-up speaking sessions. However, the quantity and quality of interaction was significantly higher during face-to-face sessions than computer-mediated sessions. No significant differences were found in the output produced by males and females in these 2 conditions. While participants felt that the use of computer-mediated communication may aid in the development of certain language skills, they generally preferred face-to-face communication. These results differed fi-om previous studies that found a greater quantity and quality of output in addition to a greater equality of interaction produced during computer-mediated sessions in comparison to face-to-face sessions (Kern, 1995; Warschauer, 1996).

Exact Tests for Contemporaneous Correlation of Disturbances in Seemingly Unrelated Regressions.

This paper proposes finite-sample procedures for testing the SURE specification in multi-equation regression models, i.e. whether the disturbances in different equations are contemporaneously uncorrelated or not. We apply the technique of Monte Carlo (MC) tests [Dwass (1957), Barnard (1963)] to obtain exact tests based on standard LR and LM zero correlation tests. We also suggest a MC quasi-LR (QLR) test based on feasible generalized least squares (FGLS). We show that the latter statistics are pivotal under the null, which provides the justification for applying MC tests. Furthermore, we extend the exact independence test proposed by Harvey and Phillips (1982) to the multi-equation framework. Specifically, we introduce several induced tests based on a set of simultaneous Harvey/Phillips-type tests and suggest a simulation-based solution to the associated combination problem. The properties of the proposed tests are studied in a Monte Carlo experiment which shows that standard asymptotic tests exhibit important size distortions, while MC tests achieve complete size control and display good power. Moreover, MC-QLR tests performed best in terms of power, a result of interest from the point of view of simulation-based tests. The power of the MC induced tests improves appreciably in comparison to standard Bonferroni tests and, in certain cases, outperforms the likelihood-based MC tests. The tests are applied to data used by Fischer (1993) to analyze the macroeconomic determinants of growth.

Indicateurs de durabilité urbaine selon une approche épidémiologique : la ville de Maringá, au Brésil

Les analyses spatiales et statistiques ont été réalisées avec les logiciels ArcView et SPSS

Finding Texture Boundaries in Images

Texture provides one cue for identifying the physical cause of an intensity edge, such as occlusion, shadow, surface orientation or reflectance change. Marr, Julesz, and others have proposed that texture is represented by small lines or blobs, called 'textons' by Julesz [1981a], together with their attributes, such as orientation, elongation, and intensity. Psychophysical studies suggest that texture boundaries are perceived where distributions of attributes over neighborhoods of textons differ significantly. However, these studies, which deal with synthetic images, neglect to consider two important questions: How can these textons be extracted from images of natural scenes? And how, exactly, are texture boundaries then found? This thesis proposes answers to these questions by presenting an algorithm for computing blobs from natural images and a statistic for measuring the difference between two sample distributions of blob attributes. As part of the blob detection algorithm, methods for estimating image noise are presented, which are applicable to edge detection as well.

Fast Sorting on a Distributed-Memory Architecture

We consider the often-studied problem of sorting, for a parallel computer. Given an input array distributed evenly over p processors, the task is to compute the sorted output array, also distributed over the p processors. Many existing algorithms take the approach of approximately load-balancing the output, leaving each processor with Θ(n/p) elements. However, in many cases, approximate load-balancing leads to inefficiencies in both the sorting itself and in further uses of the data after sorting. We provide a deterministic parallel sorting algorithm that uses parallel selection to produce any output distribution exactly, particularly one that is perfectly load-balanced. Furthermore, when using a comparison sort, this algorithm is 1-optimal in both computation and communication. We provide an empirical study that illustrates the efficiency of exact data splitting, and shows an improvement over two sample sort algorithms.

Visual strategies used during the performance of an obstacle course

Vision is the sense that provides precise information about one’s position in the environment in relation to objects. The visual system is essential to guide people safely when moving around in the environment. The perception that an individual gets from a particular scene of her/his surroundings is accomplished by eye movements. The current study aims to identify differences in visual strategies between 15 women and 15 men within the age range of 18-24 years, who have been given a task to walk through an obstacle course drawn on the laboratory´s floor. They should start and finish at a predefined location. Twelve pylons were used as obstacles to be avoided during the walking.The participants' eye movements were recorded using the Mobile Eye model 1.35. The Wilcoxon-Mann-Whitney Test was used for the statistical analysis. Significant differences occurred between men and women, in the duration of fixations: the men spend more time observing the finishing area than women (z=-1.929, p=.054); and in the number of fixations: before starting the task, the men fixate more often the middle phase of the obstacle course (z=-2.085, p=.037). Once they commence, the women fixate more the points outside the obstacle course than the men (z=-2.093, p=.036).

A comparison of conservative upwind difference schemes for the Euler equations

Numerical results are presented and compared for three conservative upwind difference schemes for the Euler equations when applied to two standard test problems. This includes consideration of the effect of treating part of the flux balance as a source, and a comparison of different averaging of the flow variables. Two of the schemes are also shown to be equivalent in their implementation, while being different in construction and having different approximate Jacobians. (C) 2006 Elsevier Ltd. All rights reserved.

Modelling the partitioning of evapotranspiration in a maize-sunflower intercrop

The primary purpose of this study was to model the partitioning of evapotranspiration in a maize-sunflower intercrop at various canopy covers. The Shuttleworth-Wallace (SW) model was extended for intercropping systems to include both crop transpiration and soil evaporation and allowing interaction between the two. To test the accuracy of the extended SW model, two field experiments of maize-sunflower intercrop were conducted in 1998 and 1999. Plant transpiration and soil evaporation were measured using sap flow gauges and lysimeters, respectively. The mean prediction error (simulated minus measured values) for transpiration was zero (which indicated no overall bias in estimation error), and its accuracy was not affected by the plant growth stages, but simulated transpiration during high measured transpiration rates tended to be slightly underestimated. Overall, the predictions for daily soil evaporation were also accurate. Model estimation errors were probably due to the simplified modelling of soil water content, stomatal resistances and soil heat flux as well as due to the uncertainties in characterising the 2 micrometeorological conditions. The SW’s prediction of transpiration was most sensitive to parameters most directly related to the canopy characteristics such as the partitioning of captured solar radiation, canopy resistance, and bulk boundary layer resistance.

Design and disposition of infrared optical multilayer coatings for the Improved Stratospheric and Mesospheric Sounder (ISAMS)

The Improved Stratospheric and Mesospheric Sounder (ISAMS) is designed to measure the Earths middle atmosphere in the range of 4.6 to 16.6 micorns. This paper considers all the coated optical elements in two radiometric test channels. (Analysis of the spectral response will be presented as a seperate paper at this symposium, see Sheppard et al). Comparisons between the compued spectral performance and measurements from actual coatings will be discussed: These will include substrate absorption simulations. The results of environmental testing (durability and stability) are included, together with details of coating deposition and monitoring conditions.

Noticing, exploring and practicing: functional grammar in the ESL classroom

This book introduces six general procedures for teaching grammar to learners of English as a second language. The procedures are designed to encourage learners to notice, explore and practice grammar in context. Each description and discussion of a procedure is followed by two sample lesson plans together with sample texts and worksheets. Teachers can either use these 'as is' or adapt them for their own students. The lessons are suitable for a wide range of students from beginning learners to advanced learners. A final chapter provides examples of lessons in which several procedures are combined. In addition, before each sample lesson plan, the grammar focus of the lesson is briefly explained for the teacher. These procedures all illustrate how grammar can be taught through texts, and they are based on an understanding of the latest research on pedagogical grammar and the role of language awareness and discovery in second language learning and provide teachers with principles they can apply in developing their own teaching materials and activities. The grammar explanations preceding each teaching plan provide a fresh look at English grammar drawing on work in systemic functional linguistics.

PMIP4-CMIP6: the contribution of the Paleoclimate Modelling Intercomparison Project to CMIP6

The goal of the Palaeoclimate Modelling Intercomparison Project (PMIP) is to understand the response of the climate system to changes in different climate forcings and to feedbacks. Through comparison with observations of the environmental impacts of these climate changes, or with climate reconstructions based on physical, chemical or biological records, PMIP also addresses the issue of how well state-of-the-art models simulate climate changes. Palaeoclimate states are radically different from those of the recent past documented by the instrumental record and thus provide an out-of-sample test of the models used for future climate projections and a way to assess whether they have the correct sensitivity to forcings and feedbacks. Five distinctly different periods have been selected as focus for the core palaeoclimate experiments that are designed to contribute to the objectives of the sixth phase of the Coupled Model Intercomparison Project (CMIP6). This manuscript describes the motivation for the choice of these periods and the design of the numerical experiments, with a focus upon their novel features compared to the experiments performed in previous phases of PMIP and CMIP as well as the benefits of common analyses of the models across multiple climate states. It also describes the information needed to document each experiment and the model outputs required for analysis and benchmarking.

Effects of Cobalt Chloride in Junctional Epithelium and Reduced Enamel Epithelium of the Rat Maxillary First Molar

Cobalt is one of the main components of cast metal alloys broadly used in dentistry. It is the constituent of 45 to 70% of numerous prosthetic works. There are evidences that metal elements cause systemic and local toxicity. The purpose of the present study was to evaluate the effects of cobalt on the junctional epithelium and reduced enamel epithelium of the first superior molar in rats, during lactation. To do this, 1-day old rats were used, whose mothers received 300mg of cobalt chloride per liter of distilled water in the drinker, during lactation. After 21 days, the rat pups were killed with an anesthetic overdose. The heads were separated, fixed in ""alfac"", decalcified and embedded in paraffin. Frontal sections stained with hematoxylin and eosin were employed. Karyometric methods allowed to estimate the following parameters: biggest, smallest and mean diameters, D/d ratio, perimeter, area, volume, volume/area ratio, eccentricity, form coefficient and contour index. Stereologic methods allow to evaluate: cytoplasm/nucleus ratio, cell and cytoplasm volume, cell number density, external surface/basal membrane ratio, thickness of the epithelial layers and surface density. All the collected data were subjected to statistic analysis by the non-parametric Wilcoxon-Mann-Whitney test. The nuclei of the studied tissues showed smaller values after karyometry for: diameters; perimeter, area, volume and volume/area ratio. Stereologically, it was observed, in the junctional epithelium and in the reduced enamel epithelium, smaller cells with scarce cytoplasm, reflected in the greater number of cells per mm3 of tissue. In this study, cobalt caused epithelial atrophy, indicating a direct action on the junctional and enamel epithelium.

Experience With Lacosamide in a Series of Children With Drug-Resistant Focal Epilepsy

We report our pediatric experience with lacosarnide, a new antiepileptic drug, approved by the US Food and Drug Administration as adjunctive therapy in focal epilepsy in patients more than 17 years old. We retrospectively reviewed charts for lacosamide use and seizure frequency outcome in patients with focal epilepsy (Wilcoxon signed rank test). Sixteen patients (7 boys) were identified (median dose 275 mg daily, 4.7 mg/kg daily; mean age 14.9 years, range 8-21 years). Patients were receiving a median of 2 antiepileptic drugs (interquartile range [IQR] 1.7-3) in addition to having undergone previous epilepsy surgery (n = 3), vagus nerve stimulation (n = 9), and ketogenic diet (n = 3). Causes included structural (encephalomalacia and diffuse encephalitis, 1 each; stroke in 2) and genetic abnormalities (Aarskog and Rett syndromes, 1 each) or cause not known (n = 10). Median seizure frequency at baseline was 57 per month (IQR 7-75), and after a median follow-up of 4 months (range 1-13 months) of receiving lacosamide, it was 12.5 per month (IQR 3-75), (P < 0.01). Six patients (37.5%; 3 seizure free) were classified as having disease that responded to therapy (>= 50% reduction seizure frequency) and 10 as having disease that did not respond to therapy (<50% in 3; increase in 1; unchanged in 6). Adverse events (tics, behavioral disturbance, seizure worsening, and depression with suicidal ideation in 1 patient each) prompted lacosamide discontinuation in 4/16 (25%). This retrospective study of 16 children with drug-resistant focal epilepsy demonstrated good response to adjunctive lacosamide therapy (median seizure reduction of 39.6%; 37.5% with >= 50% seizure reduction) without severe adverse events. (C) 2011 Elsevier Inc. All rights reserved.

Visuell utvärdering av frekvensmodulerat raster på obestruket papper.

This thesis investigated if a combination of increased under colour removal (decreasing the total ink limit), normal andincreased density and modern FM-screening could be used to provide a visually better print on uncoated and coated paperin comparison with AM-screening using the same conditions.Two different test groups (one with graphic background, the other with no graphic background) were asked to a visuallyassess the quality of the prints presented in a pair comparison using a reference image.The results show that the FM-screening did not obtain any significant visual difference in comparison with AM-screening,regardless of paper types and density levels. In general however, prints on coated paper were graded higher.

Influence of surface texture on the galling characteristics of lean duplex and austenitic stainless steels

Two simulative test methods were used to study galling in sheet forming of two types of stainlesssteel sheet: austenitic (EN 1.4301) and lean duplex LDX 2101 (EN 1.4162) in different surface conditions. Thepin-on-disc test was used to analyse the galling resistance of different combinations of sheet materials and lubricants. The strip reduction test, a severe sheet forming tribology test was used to simulate the conditionsduring ironing. This investigation shows that the risk of galling is highly dependent on the surface texture of theduplex steel. Trials were also performed in an industrial tool used for high volume production of pumpcomponents, to compare forming of LDX 2101 and austenitic stainless steel with equal thickness. The forming forces, the geometry and the strains in the sheet material were compared for the same component.It was found that LDX steels can be formed to high strain levels in tools normally applied for forming ofaustenitic steels, but tool adaptations are needed to comply with the higher strength and springback of thematerial.