171 resultados para WLAN
Resumo:
The increasing demand for Internet data traffic in wireless broadband access networks requires both the development of efficient, novel wireless broadband access technologies and the allocation of new spectrum bands for that purpose. The introduction of a great number of small cells in cellular networks allied to the complimentary adoption of Wireless Local Area Network (WLAN) technologies in unlicensed spectrum is one of the most promising concepts to attend this demand. One alternative is the aggregation of Industrial, Science and Medical (ISM) unlicensed spectrum to licensed bands, using wireless networks defined by Institute of Electrical and Electronics Engineers (IEEE) and Third Generation Partnership Project (3GPP). While IEEE 802.11 (Wi-Fi) networks are aggregated to Long Term Evolution (LTE) small cells via LTE / WLAN Aggregation (LWA), in proposals like Unlicensed LTE (LTE-U) and LWA the LTE air interface itself is used for transmission on the unlicensed band. Wi-Fi technology is widespread and operates in the same 5 GHz ISM spectrum bands as the LTE proposals, which may bring performance decrease due to the coexistence of both technologies in the same spectrum bands. Besides, there is the need to improve Wi-Fi operation to support scenarios with a large number of neighbor Overlapping Basic Subscriber Set (OBSS) networks, with a large number of Wi-Fi nodes (i.e. dense deployments). It is long known that the overall Wi-Fi performance falls sharply with the increase of Wi-Fi nodes sharing the channel, therefore there is the need for introducing mechanisms to increase its spectral efficiency. This work is dedicated to the study of coexistence between different wireless broadband access systems operating in the same unlicensed spectrum bands, and how to solve the coexistence problems via distributed coordination mechanisms. The problem of coexistence between different networks (i.e. LTE and Wi-Fi) and the problem of coexistence between different networks of the same technology (i.e. multiple Wi-Fi OBSSs) is analyzed both qualitatively and quantitatively via system-level simulations, and the main issues to be faced are identified from these results. From that, distributed coordination mechanisms are proposed and evaluated via system-level simulations, both for the inter-technology coexistence problem and intra-technology coexistence problem. Results indicate that the proposed solutions provide significant gains when compare to the situation without distributed coordination.
Resumo:
Presented are the design and results of a reconfigurable UWB filtenna with sharp dual bandnotch at WiMAX 3.5 GHz and WLAN 5.8 GHz bands. The filtenna is formed by placing three loop resonators in an UWB antenna. The resonators are fitted with Graphene based switches which introduce reconfigurability. The filtenna was simulated electromagnetically and with Graphene based switches in switches OFF and switches ON states. Presented results show a passband from 2.81–12.27 GHz in OFF state and ON state results in sharp dual bandnotch within the passband at 3.45 and 5.95 GHz at a return loss of 2–2.5 dB. The gain and efficiency in both states has also been given and is reduced in ON state at the dual bandnotch. The radiation patterns in E- and H-planes are stable.
Resumo:
This paper presents the layout and results of a compact inkjet-printed filtenna operating at the S-band, ISM and UWB frequencies. The filtenna has a wide passband and, alongside, rejects WiMAX 3.5 GHz, WLAN 5.8 GHz and ITU service 8.2 GHz bands. The filtenna is simulated, printed using silver nanoparticle ink on flexible Kapton substrate and measured. Obtained simulation and measurement results agree well with each other. Measured return loss of the filtenna is more than 10 dB for 1.6–10.85 GHz and triple bandnotch, measuring at an average of 1.87 dB, are present at the unwanted bands. Radiation patterns, as well as the gain and efficiency of the filtenna have also been presented; with the average values being 3.4 dBi and 90 % respectively for the passband and averaging at −1.0 dBi and 22 % respectively for the three rejected bands.
Resumo:
MeduMobile ist ein im Rahmen der Ausschreibung „Notebook-University“ vom bmb+f gefördertes Projekt. Ziel des Projektes ist es, die Ausbildung am Krankenbett im Medizinstudium zu verbessern, indem bestimmte Lehrveranstaltungen mit Hilfe von WLAN und Notebook ubiquitär auf dem Campus verfügbar gemacht werden. Hierzu werden neue, so genannte OnCall-Lehrszenarien entwickelt und erprobt, bei denen die auf Abruf bereit stehenden Medizinstudierenden alarmiert und zur Teilnahme gebeten werden, wenn akute und/oder seltene Fälle in die Klinik eingeliefert werden. Die Studierenden nehmen aktiv an den vielfach interdisziplinären Lehrveranstaltungen teil. Der Unterricht findet vor, während und nach der Live-Session statt. Der Hochschullehrer und die Studierenden können den Fall gemeinsam besprechen und die Diagnose bzw. Therapie u.a. an Hand bildgebender Verfahren (CT, Mikroskop, Röntgen, Ultraschall, ...) erarbeiten. Parallel dazu können die Studierenden Lehrmaterialen aus multimedialen Datenbanken, Medline und Internet nutzen sowie eigene Videokonferenzen für die Gruppenarbeit einsetzen. Eine solche Lehrveranstaltung kann somit mehrere didaktische Elemente beinhalten: instruktives, konstruktives, kognitives und kooperatives Lernen. An der Erprobung nehmen etwa 80 Studierende an Veranstaltungen aus 8 Fachgebieten teil. Es werden Studien zur Evaluation des didaktischen Mehrwerts sowie technischer und organisatorischer Qualität durchgeführt. Endgültige Ergebnisse werden Ende 2003 vorliegen.(DIPF/Orig.)
Resumo:
This thesis presents security issues and vulnerabilities in home and small office local area networks that can be used in cyber-attacks. There is previous research done on single vulnerabilities and attack vectors, but not many papers present full scale attack examples towards LAN. First this thesis categorizes different security threads and later in the paper methods to launch the attacks are shown by example. Offensive security and penetration testing is used as research methods in this thesis. As a result of this thesis an attack is conducted using vulnerabilities in WLAN, ARP protocol, browser as well as methods of social engineering. In the end reverse shell access is gained to the target machine. Ready-made tools are used in the attack and their inner workings are described. Prevention methods are presented towards the attacks in the end of the thesis.
Resumo:
Dissertação (mestrado)—Universidade de Brasília, Faculdade de Tecnologia, Departamento de Engenharia Elétrica, 2016.