UV irradiation of human keratinocytes activates the inflammasome

Human keratinocytes represent a potent source of the pro-inflammatory cytokines pro-interleukin(IL)-1α and -β. ProIL-1β requires processing by caspase-1 (IL-1β-converting enzyme, ICE) for activation and receptor binding. ProIL-1α and -β lack a signal peptide and leave the cell via the alternative secretion pathway, which is independent of the classical ER/Golgi pathway. Both cytokines are stored in the cytoplasm and can be activated and released upon UV irradiation. In macrophages maturation of proIL-1β requires the activation of inflammasomes, innate multiprotein immune complexes, which are essential for the activation of caspase-1 and thereby for processing of proIL-1β. However, the intracellular pathways, which are responsible for activation of proIL-1β and secretion of IL-1β in keratinocytes, are unknown. We show that human keratinocytes express inflammasome proteins in vitro and in vivo. UVB irradiation of keratinocytes results in an increase of cytoplasmic Ca2+ from intracellular stores. This shift is required for inflammasome-dependent activation of caspase-1 and subsequent processing of proIL-1β and secretion of IL-1β. In contrast to macrophages, caspase-1 cannot activate proIL-18 in keratinocytes, although secretion of this cytokine is also induced by UVB irradiation. In vivo, caspase-1 is also essential for UVB-induced inflammation in the skin, since caspase-1 knockout mice showed a strongly reduced inflammatory response after UVB irradiation. Our results suggest that keratinocytes are important immuno-competent cells under physiological and pathological conditions.

Água aquecida e radiação UV-C no controle pós-colheita de Cryptosporiopsis perennans em maçãs

O objetivo deste trabalho foi avaliar a colonização de Cryptosporiopsis perennans na epiderme de maçãs e a eficiência da aplicação de água aquecida e radiação UV-C no controle desse patógeno. Em maçãs submetidas à inoculação de C. perennans, a colonização de lenticelas e das áreas adjacentes pelo patógeno foi avaliada por microscopia eletrônica de varredura. A sensibilidade dos conídios de C. perennans aos tratamentos foi avaliada em suspensão aquosa, às temperaturas de 28, 45, 50 e 55ºC, por 15 e 30 s, e às doses de radiação UV-C de 0,018, 0,037, 0,075, 0,150, 0,375, 0,750, 1,500 e 3,000 kJ m-2. Em maçãs submetidas à inoculação de C. perennans, foram avaliados os efeitos de 0,375, 0,750 e 1,500 kJ m-2 de radiação UV-C e da aspersão de água aquecida à 50ºC, por 15 e 30 s no controle do patógeno. O fungo produziu abundante micélio e conídios nas lenticelas e nas áreas adjacentes, na epiderme das maçãs. A água aquecida a 50ºC por 15 s e à dose de radiação de UV-C de 0,750 kJ m-2 reduzem em mais de 99% a sobrevivência de conídios. A aspersão de água aquecida a 50ºC por 15 s e à dose de radiação de UV-C de 0,375 kJ m-2, controlam C. perennans em maçãs.

Designing Digital Filters for Servo Systems

The aim of this work was to select an appropriate digital filter for a servo application and to filter the noise from the measurement devices. Low pass filter attenuates the high frequency noise beyond the specified cut-off frequency. Digital lowpass filters in both IIR and FIR responses were designed and experimentally compared to understand their characteristics from the corresponding step responses of the system. Kaiser Windowing and Equiripple methods were selected for FIR response, whereas Butterworth, Chebyshev, InverseChebyshev and Elliptic methods were designed for IIR case. Limitations in digital filter design for a servo system were analysed. Especially the dynamic influences of each designed filter on the control stabilityof the electrical servo drive were observed. The criterion for the selection ofparameters in designing digital filters for servo systems was studied. Control system dynamics was given significant importance and the use of FIR and IIR responses in different situations were compared to justify the selection of suitableresponse in each case. The software used in the filter design was MatLab/Simulink® and dSPACE's DSP application. A speed controlled Permanent Magnet Linear synchronous Motor was used in the experimental work.

Washing and Dewatering of Different Starches in Pressure Filters

The main objective of this thesis was togenerate better filtration technologies for effective production of pure starchproducts, and thereby the optimisation of filtration sequences using created models, as well as the synthesis of the theories of different filtration stages, which were suitable for starches. At first, the structure and the characteristics of the different starch grades are introduced and each starch grade is shown to have special characteristics. These are taken as the basis of the understanding of the differences in the behaviour of the different native starch grades and their modifications in pressure filtration. Next, the pressure filtration process is divided into stages, which are filtration, cake washing, compression dewatering and displacement dewatering. Each stage is considered individually in their own chapters. The order of the different suitable combinations of the process stages are studied, as well as the proper durations and pressures of the stages. The principles of the theory of each stageare reviewed, the methods for monitoring the progress of each stage are presented, and finally, the modelling of them is introduced. The experimental results obtained from the different stages of starch filtration tests are given and the suitability of the theories and models to the starch filtration are shown. Finally, the theories and the models are gathered together and shown, that the analysis of the whole starch pressure filtration process can be performed with the software developed.

Effluent particle removal by microirrigation system filters

La distribución del número y del volumen de partículas, y la eficiencia de eliminación de las partículas y los sólidos en suspensión de diferentes efluentes y sus filtrados, fueron analizadas para estudiar si los filtros más usuales en los sistemas de riego localizado eliminan las partículas que pueden obturar los goteros. En la mayoría de los efluentes y filtrados fue mínimo el número de partículas con diámetros superiores a 20 μm. Sin embargo, al analizar la distribución del volumen de las partículas, en los filtrados aparecieron partículas de dimensiones superiores a la luz de los filtros de anillas y malla, siendo el filtro de arena el que retuvo las partículas de mayor diámetro. La eficiencia de los filtros para retener partículas se debió más al tipo de efluente que al filtro. Se verificó también que la distribución del número de partículas sigue una relación de tipo potencial. Analizando el exponente β de la ley potencial, se halló que los filtros no modificaron significativamente la distribución del número de partículas de los efluentes.

Occupational UV exposure in French outdoor workers.

OBJECTIVES: Occupational ultraviolet (UV) exposure was evaluated in a population-based sample in France. METHODS: A random survey was conducted in 2012 in individuals aged 25 to 69 years. The median daily standard erythemal UV dose (SED) was estimated from exposure time and place and matched to satellite UV records. RESULTS: A total of 889 individuals were exposed to solar UV with highest doses observed among gardeners (1.19 SED), construction workers (1.13 SED), agricultural workers (0.95 SED), and culture/art/social science workers (0.92 SED). Information and communication technology, industry, and transport workers were highly exposed (>0.70 SED). Significant factors associated with high occupational UV exposure were sex (P < 0.0001), phototype (P = 0.0003), and taking lunch outdoors (P < 0.0001). CONCLUSIONS: This study identified not only expected occupations with high UV exposure but also unexpected occupations with high exposures. This could serve as a basis for future prevention.

Identifying the preferred subset of enzymatic profiles in nonlinear kinetic metabolic models via multiobjective global optimization and pareto filters

Optimization models in metabolic engineering and systems biology focus typically on optimizing a unique criterion, usually the synthesis rate of a metabolite of interest or the rate of growth. Connectivity and non-linear regulatory effects, however, make it necessary to consider multiple objectives in order to identify useful strategies that balance out different metabolic issues. This is a fundamental aspect, as optimization of maximum yield in a given condition may involve unrealistic values in other key processes. Due to the difficulties associated with detailed non-linear models, analysis using stoichiometric descriptions and linear optimization methods have become rather popular in systems biology. However, despite being useful, these approaches fail in capturing the intrinsic nonlinear nature of the underlying metabolic systems and the regulatory signals involved. Targeting more complex biological systems requires the application of global optimization methods to non-linear representations. In this work we address the multi-objective global optimization of metabolic networks that are described by a special class of models based on the power-law formalism: the generalized mass action (GMA) representation. Our goal is to develop global optimization methods capable of efficiently dealing with several biological criteria simultaneously. In order to overcome the numerical difficulties of dealing with multiple criteria in the optimization, we propose a heuristic approach based on the epsilon constraint method that reduces the computational burden of generating a set of Pareto optimal alternatives, each achieving a unique combination of objectives values. To facilitate the post-optimal analysis of these solutions and narrow down their number prior to being tested in the laboratory, we explore the use of Pareto filters that identify the preferred subset of enzymatic profiles. We demonstrate the usefulness of our approach by means of a case study that optimizes the ethanol production in the fermentation of Saccharomyces cerevisiae.

Tratamentos hidrotérmico e com radiação UV-C no controle pós-colheita da podridão olho-de-boi em uma linha comercial de seleção de maçãs

Avaliaram-se os efeitos da aspersão hidrotérmica e da radiação UV-C no controle pós-colheita da podridão olho-de-boi (POB) em maçãs 'Fuji', após um e oito meses de armazenamento, e 'Gala', após cinco meses de armazenamento, ambas sob condição de atmosfera controlada (AC). Esses frutos foram inoculados ou mantidos com infecção natural de Cryptosporiopsis perennans. As maçãs 'Fuji' foram submetidas aos seguintes tratamentos, aplicados em uma linha comercial de seleção: sem tratamento (testemunha); aspersão hidrotérmica (água a 50ºC por 12 segundos); radiação UV-C (0,0069 kJ m-2); e aspersão hidrotérmica + radiação UV-C. As maçãs 'Gala' também foram submetidas a estes tratamentos utilizados em 'Fuji', exceto ao tratamento com aspersão hidrotérmica + radiação UV-C. Após os tratamentos, as maçãs foram incubadas a 22ºC por 15 dias e avaliadas quanto à incidência da doença. Nas maçãs 'Fuji', os tratamentos de aspersão hidrotérmica e/ou radiação UV-C reduziram a incidência da POB nos frutos inoculados e com infecção natural, proporcionando controle superior a 56% e 54%, em relação à testemunha, respectivamente. Em maçãs 'Gala' inoculadas, os tratamentos com aspersão hidrotérmica e radiação UV-C também reduziram o número de unidades formadoras de colônias (UFC) nos frutos, com controle superior a 70%, e a incidência da POB, com controle superior a 69% em relação à testemunha. Em maçãs 'Gala', com infecção natural, estes tratamentos apresentaram controle da POB superior a 85% em relação à testemunha. Os resultados obtidos mostram que os tratamentos com aspersão hidrotérmica e/ou radiação UV-C reduzem a incidência da POB em maçãs 'Fuji' e 'Gala', em linha comercial de seleção. Todavia, o uso da radiação UV-C, em ambas as cultivares, foi o tratamento que apresentou maior benefício e retorno econômico.

ZnO nanorods for efficient third harmonic UV generation.

ZnO nanorods grown by both high temperature vapour phase transport and low temperature chemical bath deposition are very promising sources for UV third harmonic generation. Material grown by both methods show comparable efficiencies, in both cases an order of magnitude higher than surface third harmonic generation at the quartz-air interface of a bare quartz substrate. This result is in stark contrast to the linear optical properties of ZnO nanorods grown by these two methods, which show vastly different PL efficiencies. The third harmonic generated signal is analysed using intensity dependent measurements and interferometric frequency resolved optical gating, allowing extraction of the laser pulse parameters. The comparable levels of efficiency of ZnO grown by these very different methods as sources for third harmonic UV generation provides a broad suite of possible growth methods to suit various substrates, coverage and scalability requirements. Potential application areas range from interferometric frequency resolved optical gating characterization of few cycle fs pulses to single cell UV irradiation for biophysical studies.

Fenólicos totais, polifenoloxidade e coloração em abacate 'Hass' submetido a radiação UV-C

Avaliou-se o efeito da radiação UV-C em abacates Hass, quanto ao conteúdo de fenólicos totais, atividade da enzima polifenoloxidase (PPO) e coloração. Os frutos selecionados foram submetidos à radiação em luz UV-C durante 5; 10; 15 e 20 minutos, sendo mantidos sob refrigeração (10 ± 1 ºC e 90±5% UR), e avaliados durante 15 dias. Para o teor fenólicos totais e PPO, não se observou diferença entre os tratamentos dos frutos nos diferentes tempos de exposição à luz UV-C. Os teores fenólicos totais e PPO diminuíram durante o período experimental. Os valores de luminosidade mantiveram-se elevados (85,4 a 88,5) no armazenamento. Os valores de cor a* e b* diminuíram com o armazenamento de forma mais intensa para os frutos submetidos à radiação UV-C. Não houve correlação significativa para a PPO, conteúdo de fenólicos totais e coloração.

Painatuksen UV-stabiilisuuden optimointi fenolihartsatussa paperissa

Tässä diplomityössä tutkittiin painetun paperin ja siitä fenoliformaldehydihartsilla impregnoimalla valmistetun pinnoituskalvon UV-stabiilisuuden parantamis-mahdollisuuksia. Työn kirjallisuusosassa käsitellään painetun pinnoituskalvon valmistusprosessia ja painatuksen UV-valonkestoon vaikuttavia tekijöitä. Painovärin pigmentti, sen määrä ja käsittely, painovärin sideaine sekä fenoliformaldehydihartsi ja sen lisäaineet vaikuttavat pinnoitetun betonoimisvanerin säänkesto-ominaisuuksiin. Erilaisilla epäorgaanisilla valkoisilla pigmenteillä ja kidemuodoilla on erilainen UV-valonkesto ja taitekerroin. Päällystämällä titaanidioksidi esimerkiksi alumiini- tai zirkoniumoksideilla sen UV-valonkestoa voidaan parantaa merkittävästi. UV-hajoaminen voidaan havaita painetun pinnoitteen liituuntumisena. Liituuntumista voidaan pitää veden ja hapen välisenä reaktiona, jota titaanidioksidi ja UV-säteily katalysoivat. Sen takia myös muiden valkoisten epäorgaanisten pigmenttien ominaisuuksia ja käyttöä selvitettiin. Kokeissa käytettiin yhdeksää eri painoväriä, kahta eri paksuista paperia ja kahta eri tyyppistä hartsia. Painovärejä ohennettiin vedellä ja paperin painopuolta vaihdeltiin. Kaikissa painatuksissa käytettiin kolmea eri rasterointiasteen laattaa, jolloin painovärin määrää paperissa saatiin vähennettyä. Painetuista papereista mitattiin densiteetti, värimäärä, pisara-absorptio vedellä ja kontaktikulma hartsilla. Myös painovärin tunkeumaa selvitettiin paperin poikkileikeistä tehtyjen SEM-kuvien avulla. Painetut paperit impregnoitiin fenoliformaldehydihartsilla kalvoksi. Pinnoituskalvot puristettiin vanerin pinnalle laboratoriopuristimella. Koekappaleet altistettiin UV-valolle, sateelle ja pakkaselle sääkaapissa 400 h ajan, mikä vastaa noin 1,5 vuotta ulkona Suomen oloissa. Kappaleista mitattiin kiilto, värinmuutos ja liituuntuminen. Pinnoitteen liituuntumista tapahtui vähiten niissä koepisteissä, joissa painatus oli tehty 30 % rasteroidulla laatallaSäänkestävä TiO2 osoittautui hyväksi, mutta myös ZnO-pigmentillä saatiin hyviä tuloksia. ZnO-koepisteessä liituuntumisreaktio ei ole niin voimakkaasti katalysoitu kuin TiO2-koepisteissä. Paksun paperin painatuspuolella näytti olevan merkitystä säänkestoon. Huopapuolelle painettuna pinnoitteen liituuntuminen oli vähäisempää

Hylky- ja vesijärjestelmän vaikutus kartongin tuotepuhtauteen

Kirjallisuusosassa käsitellään paperi- ja kartonkikoneiden eri vesijärjestelmiä, vedenkäytön vähentämistä ja sen vaikutusta prosessiin. Mikrobiologiaa, mikrobien aiheuttamia prosessiongelmia, mikrobien torjuntaa ja simulointia on myös käsitelty kirjallisuusosassa. Kokeellisessa osassa laadittiin Kartonkikone 1:n massa- ja vesijärjestelmän mikrobiologisen puhtauden simulointimalli Balas-prosessisimulointiohjelmalla. Kartongin mikrobiologinen puhtaus määritettiin kokonaispesäkelukuna. Kokeellinen osa sisälsi pilot-mittakaavan suodatinkoeajoja, joissa määritettiin tarvittavat erotusparametrit simulointimallille, selvitettiin Dynasand-hiekkasuodattimen soveltuvuus suihkuvesien puhdistukseen, Dynadisc-kiekkosuodattimen käyttökelpoisuus kiertoveden puhdistukseen kiertovesisuodattimena ja hiekkasuodattimien esisuodattimena sekä UV-reaktorin soveltuvuus suodatettujen vesien desifiointiin. Simulointimallilla tarkasteltiin eri prosessivaihtoehtojen vaikutus kartongin mikrobiologiseen puhtauteen. Suihkuvesien puhdistaminen hiekkasuodattimilla alentaa kokonaispesäkelukua vain vähän. Koneen ajettavuus paranee suihkuputkien roskaryöppyjen ja viiraosan limoittumisen vähenemisen takia. Kiertovesijärjestelmän pelkkä jakaminen hylkyprosessi- ja sakeudensäätövedeksi aiheuttaa kokonaispesäkeluvun kasvun prosessista poistettavien vesien puhdistumisen takia. Kokonaispesäkeluku minimoidaan poistamalla ylimääräinen vesi hylkysaostajan suodoksena. Suodatettua hylkysaostajan suodoksen ja viiraveden seosta käytetään sekä sakeudensäätö- että hylkyprosessivedeksi. Hylkymassalla on dominoiva vaikutus kokonaispesäkelukuun. Suurin vähennys kokonaispesäkeluvussa saadaan estämällä mikrobikasvu hylkymassassa. Tämä voidaan tehdä kuumentamalla hylkymassa 80 °C:n höyryllä. Suodatuskoeajojen perusteella Dynasand-hiekkasuodattimella voidaan puhdistaa pisaralämmönvaihtimelta saatavaa lämmintä suihkuvettä. Esisuodatettua kiertovettä voidaan puhdistaa Dynasand-hiekkasuodattimella viiran johtotelojen suihkuvedeksi. Dynadisc-kiekkosuodatinta voidaan käyttää hiekkasuodattimen esisuodattimena ja kiertovesisuodattimena. UV-säteily poistaa tehokkaasti mikrobeja suodatetuista vesistä.

PREVENTION OF CHILLING INJURY IN 'TOMMY ATKINS' MANGOES PREVIOUSLY STORED AT 5 ºC, USING HEAT TREATMENT AND RADIATION UV (UV-C)

ABSTRACT The objective of this study was to evaluate the effect of heat treatment and ultraviolet radiation (UV-C) in the prevention of chilling injury in mangoes cv. Tommy Atkins previously stored or not under injury condition after their transference to ambient condition. Fruits were divided into groups: two were hydrothermally treated (46.1 ºC/90 min; 55 ºC/5 min) and two were exposed to UV-C radiation (1.14 kJ m-2; 2.28 kJ m-2). These groups were stored under chilling injury conditions (5 ºC for 14 days), as established in preliminary tests. Other untreated groups were stored at 12 ºC or 5 ºC. After the storage period, they were transferred to ambient conditions (21.9 ºC; 55% RH) and the quality was evaluated. All the data were submitted to multivariate analysis as the tool to verify the simultaneous effect of the treatments under the quality parameters. The multivariate analysis indicated that the hydrothermal treatments at 46.1 °C/90 min and 55 °C/5 min and the UV-C radiation at doses of 1.14 kJ m-2 and 2.28 kJ m-2 were effective in minimized the symptoms of chilling injury in mangoes ‘Tommy Atkins’ stored at 5 °C for 14 days. However, after their transference to environmental condition at 21.9 °C, only the UV-C kept this control, especially at a dose of 2.28 kJ m-2. This treatment did not prevent the development of the characteristic color or affected the normal ripening and allowed the conservation of fruit for a period of 14 days at 5 °C, plus seven days of storage at environmental condition, which corresponds to the shipping transportation plus the time for sale.

Determination and characterization of quinolones in foodstuffs of animal origin by CE-UV, LC-UV, LC-Fl, LC-MS and LC-MS/MS

In this work methods for the multiresidue determination of the series of quinolones include in the European regulation in food of animal origin are de veloped and validated in line with Commission Decision 2002/657/EC in terms of linearity, decision limit, capability detection, precision and stability. Mult iresidue methods were established to allow the determination of quinolones covered by EU legislation in 2377/90/EC in muscle of chicken, turkey, pig and cow, plasma of cow and pig, liver of pig and milk of cow. First an extraction step was optimized and a SPE step was applied to clean!up and preconcentrate quinolones prior to their separation by CE or LC and determination by CE!UV, LC!UV, LC!Fl, LC!MS with different ion sources (ESI ,ApCI) and different mass analyser (Q, ToF) and LC!E SI!QqQ tandem mass spectrometry. The limits of quantification obtained are always lower than Maxim um Residue Limit (MRL) established by EU for quinolones in animal products and they can be applied to the control of quinolones in foodstuffs of animal origin . Finally the proposed methods were applied to determine quinolones in samples of turkey and pig muscle, pig plasma and milk of cow. Excellent quality parameters and reduced time of analysis were obtained when LC!ESI!MS/MS is used, although the others techniques presented too satisfactory results.

Anatomical UV Exposure in French Outdoor Workers.

BACKGROUND: Solar ultraviolet has been recognized as the main causative factor for skin cancer and is currently classified as a carcinogenic agent by International Agency for Research on Cancer. METHOD: Results from a previous phone survey conducted in 2012 in France were used to assess exposure conditions to sun among outdoor workers. Satellite data were used in combination with an exposure model to assess anatomical exposure. RESULT: The yearly median exposure of the outdoor worker population is 77  kJ/m2 to 116  kJ/m2. Road workers, building workers, and gardeners are the more exposed. About 70% of the yearly dose estimate is due to the cumulative summer and spring exposures. CONCLUSIONS: This study highlights the role of individual factors in anatomical exposure and ranks the most exposed body parts and outdoor occupations. Prevention messages should put emphasis on spring exposure, which is an important contributor to the yearly dose.