Development in one dimension: the rapid differentiation of Dictyostelium discoideum in glass capillaries.

When Dictyostelium discoideum cells are drawn into a fine glass capillary, they rapidly begin the first steps toward the formation of prestalk and prespore zones. Some of the events occur within a minute or two, whereas others follow later. The cells in the front segment are actively motile and those in the hind segment are passive. The volumes of the segments are proportional for different-sized cell masses, and those proportions are the same as those found in normal slugs. When the cells are stained with the vital dye neutral red, the anterior zone becomes darker simultaneously with the formation of the division line. Green fluorescent protein expressed from a stalk-specific promoter is synthesized mostly in the anterior end. Later, this capillary prestalk zone shows a sharp increase in alkaline phosphatase activity, which is known to be characteristic of prestalk cells.

The ionized gas in the CALIFA early-type galaxies I. Mapping two representative cases: NGC 6762 and NGC 5966

As part of the ongoing CALIFA survey, we have conducted a thorough bidimensional analysis of the ionized gas in two E/S0 galaxies, NGC 6762 and NGC 5966, aiming to shed light on the nature of their warm ionized ISM. Specifically, we present optical (3745–7300 Å) integral field spectroscopy obtained with the PMAS/PPAK integral field spectrophotometer. Its wide field-of-view (1′ × 1′) covers the entire optical extent of each galaxy down to faint continuum surface brightnesses. To recover the nebular lines, we modeled and subtracted the underlying stellar continuum from the observed spectra using the STARLIGHT spectral synthesis code. The pure emission-line spectra were used to investigate the gas properties and determine the possible sources of ionization. We show the advantages of IFU data in interpreting the complex nature of the ionized gas in NGC 6762 and NGC 5966. In NGC 6762, the ionized gas and stellar emission display similar morphologies, while the emission line morphology is elongated in NGC 5966, spanning ~6 kpc, and is oriented roughly orthogonal to the major axis of the stellar continuum ellipsoid. Whereas gas and stars are kinematically aligned in NGC 6762, the gas is kinematically decoupled from the stars in NGC 5966. A decoupled rotating disk or an “ionization cone” are two possible interpretations of the elongated ionized gas structure in NGC 5966. The latter would be the first “ionization cone” of such a dimension detected within a weak emission-line galaxy. Both galaxies have weak emission-lines relative to the continuum[EW(Hα) ≲ 3 Å] and have very low excitation, log([OIII]λ5007/Hβ) ≲ 0.5. Based on optical diagnostic ratios ([OIII]λ5007/Hβ, [NII]λ6584/Hα, [SII]λ6717, 6731/Hα, [OI]λ6300/Hα), both objects contain a LINER nucleus and an extended LINER-like gas emission. The emission line ratios do not vary significantly with radius or aperture, which indicates that the nebular properties are spatially homogeneous. The gas emission in NGC 6762 can be best explained by photoionization by pAGB stars without the need of invoking any other excitation mechanism. In the case of NGC 5966, the presence of a nuclear ionizing source seems to be required to shape the elongated gas emission feature in the “ionization cone” scenario, although ionization by pAGB stars cannot be ruled out. Further study of this object is needed to clarify the nature of its elongated gas structure.

Existential dissonance : a dimension of inauthenticity

This paper will initially review integral concepts found within Heidegger’s understanding of existence or being - namely the dialectic between authentic and inauthentic living, and by extension, existential guilt, anxiety, and regret. Next, I will discuss a particular dimension of inauthenticity found at the intersection of existential guilt and regret, termed existential dissonance. This term, adapted from Festinger’s theory of cognitive dissonance will serve to illuminate several clinical phenomena. To ground this concept further, I will provide two case examples that further express and clarify this concept.

The Judicial Dimension of the European Neighbourhood Policy. EU Diplomacy Paper 08/2013, November 2013

In this paper, the expression “neighbourhood policy” of the European Union (EU) is understood in a broad way which includes the members of the European Free Trade Association (EFTA) contracting parties to the European Economic Area (EEA), the EFTA State Switzerland, candidate states, the countries of the European Neighbour-hood Policy (ENP), and Russia. The European Court of Justice (ECJ) is the centre of gravity in the judicial dimension of this policy. The innermost circle of integration after the EU itself comprises the EFTA States who are party to the European Economic Area. With the EFTA Court, they have their own common court. The existence of two courts – the ECJ and the EFTA Court – raises the question of homogeneity of the case law. The EEA homogeneity rules resemble the ones of the Lugano Convention. The EFTA Court is basically obliged to follow or take into account relevant ECJ case law. But even if the ECJ has gone first, there may be constellations where the EFTA Court comes to the conclusion that it must go its own way. Such constellations may be given if there is new scientific evidence, if the ECJ has left certain questions open, where there is relevant case law of the European Court of Human Rights or where, in light of the specific circumstances of the case, there is room for “creative homogeneity”. However, in the majority of its cases the EFTA Court is faced with novel legal questions. In such cases, the ECJ, its Advocates General and the Court of First Instance make reference to the EFTA Court’s case law. The question may be posed whether the EEA could serve as a model for other regional associations. For the ENP states, candidate States and Russia this is hard to imagine. Their courts will to varying degrees look to the ECJ when giving interpretation to the relevant agreements. The Swiss Government is – at least for the time being – unwilling to make a second attempt to join the EEA. The European Commission has therefore proposed to the Swiss to dock their sectoral agreements with the EU to the institutions of the EFTA pillar, the EFTA Surveillance Authority (ESA) and the EFTA Court. Switzerland would then negotiate the right to nominate a member of the ESA College and of the EFTA Court. The Swiss Government has, however, opted for another model. Swiss courts would continue to look to the ECJ, as they did in the past, and conflicts should also in the future be resolved by diplomatic means. But the ECJ would play a decisive role in dispute settlement. It would, upon unilateral request of one side, give an “authoritative” interpretation of EU law as incorporated into the relevant bilateral agreement. In a “Non-Paper” which was drafted by the chief negotiators, the interpretations of the ECJ are even characterised as binding. The decision-making power would, however, remain with the Joint Committees where Switzerland could say no. The Swiss Government assumes that after a negative decision by the ECJ it would be able to negotiate a compromise solution with the Commission without the ECJ being able to express itself on the outcome. The Government has therefore not tried to emphasise that the ECJ would not be a foreign court. Whether the ECJ would accept its intended role, is an open question. And if it would, the Swiss Government would have to explain to its voters that Switzerland retains the freedom to disregard such a binding decision and that for this reason the ECJ is not only no foreign court, but no adjudicating court at all.

Does customer satisfaction lead to improved brand equity? An empirical examination of two categories of retail brands

Purpose – The objective of the present research is to examine the relationship between consumers' satisfaction with a retailer and the equity they associate with the retail brand. Design/methodology/approach – Retail brand equity is conceptualized as a four-dimensional construct comprising: retailer awareness, retailer associations, retailer perceived quality, and retailer loyalty. Then the associative network memory model is applied from cognitive psychology to the specific context of the relationships between customer satisfaction and consumer-based retailer equity. A survey was undertaken using a convenience sample of shopping mall consumers in an Australian state capital city. The questionnaire used to collect data included an experimental design such that two categories of retailers were included in the study: department stores and specialty stores, with three retailers representing each category. The relationship between consumer-based retailer equity and customer satisfaction was examined using multivariate analysis of variance. Findings – Results indicate that retail brand equity varies with customer satisfaction. For department stores, each consumer-based retailer equity dimension varied according to customer satisfaction with the retailer. However, for specialty stores, only three of the consumer-based retailer equity dimensions, namely retailer awareness, retailer associations and retailer perceived quality, varied according to customer satisfaction level with the retailer. Originality/value – The principal contribution of the present research is that it demonstrates empirically a positive relationship between customer satisfaction and an intangible asset such as retailer equity.

German-Irish corporate relationships:the cultural dimension

The thesis raises the question of whether or not in an age of internationalisation and globalisation, the cultural differences which exist between Germany and Ireland are still relevant to German-Irish corporate relationships or have internationally accepted best practices removed culture from the equation? The first three chapters establish the theoretical framework of the thesis by outlining the broadly culturalist/institutionalist approach, based on the work of Hofstede and Maurice et al, to be pursued, profiling the business cultures of both countries by analysing the components of their respective national institutional frameworks, and the examining existing approaches to the study of mother company-foreign subsidiary relationships. Chapters four to seven constitute the empirical section of the thesis. Using the interviews carried out with two sample groups (Sample Group A: 15 German mother companies and 14 of their Irish operations and Sample Group B: 7 Irish mother companies and 9 of their German operations), the mother companies in both groups are examined to see whether or not they demonstrate characteristics which are in keeping with their national business cultures. Their foreign operations are then analysed as is the mother company-foreign subsidiary relationship to determine whether or not any mother company influences are visible. The general approaches adopted by the two groups of mother companies to their foreign operations are compared and contrasted. Finally, differences in national attitudes and values are identified and their impact assessed. The analysis reveals that despite existing pressures towards convergence, the cultural differences between both countries are still relevant to the relationship particularly at the level of attitudes and values and although similarities in the mother company approaches to their subsidiaries are present, national specificities may nevertheless be detected.

Work Creativity as a Dimension of Job Performance

To stay competitive, many employers are looking for creative and innovative employees to add value to their organization. However, current models of job performance overlook creative performance as an important criterion to measure in the workplace. The purpose of this dissertation is to conduct two separate but related studies on creative performance that aim to provide support that creative performance should be included in models of job performance, and ultimately included in performance evaluations in organizations. Study 1 is a meta-analysis on the relationship between creative performance and task performance, and the relationship between creative performance and organizational citizenship behavior (OCB). Overall, I found support for a medium to large corrected correlation for both the creative performance-task performance (ρ = .51) and creative performance-OCB (ρ = .49) relationships. Further, I also found that both rating-source and study location were significant moderators. Study 2 is a process model that includes creative performance alongside task performance and OCB as the outcome variables. I test a model in which both individual differences (specifically: conscientiousness, extraversion, proactive personality, and self-efficacy) and job characteristics (autonomy, feedback, and supervisor support) predict creative performance, task performance, and OCB through engagement as a mediator. In a sample of 299 employed individuals, I found that all the individual differences and job characteristics were positively correlated with all three performance criteria. I also looked at these relationships in a multiple regression framework and most of the individual differences and job characteristics still predicted the performance criteria. In the mediation analyses, I found support for engagement as a significant mediator of the individual differences-performance and job characteristics-performance relationships. Taken together, Study 1 and Study 2 support the notion that creative performance should be included in models of job performance. Implications for both researchers and practitioners alike are discussed.

Universal critical behavior of the two-dimensional Ising spin glass

We use finite size scaling to study Ising spin glasses in two spatial dimensions. The issue of universality is addressed by comparing discrete and continuous probability distributions for the quenched random couplings. The sophisticated temperature dependency of the scaling fields is identified as the major obstacle that has impeded a complete analysis. Once temperature is relinquished in favor of the correlation length as the basic variable, we obtain a reliable estimation of the anomalous dimension and of the thermal critical exponent. Universality among binary and Gaussian couplings is confirmed to a high numerical accuracy.

Levi-flat Minimal Hypersurfaces in Two-dimensional Complex Space Forms

The purpose of this article is to classify the real hypersurfaces in complex space forms of dimension 2 that are both Levi-flat and minimal. The main results are as follows: When the curvature of the complex space form is nonzero, there is a 1-parameter family of such hypersurfaces. Specifically, for each one-parameter subgroup of the isometry group of the complex space form, there is an essentially unique example that is invariant under this one-parameter subgroup. On the other hand, when the curvature of the space form is zero, i.e., when the space form is complex 2-space with its standard flat metric, there is an additional `exceptional' example that has no continuous symmetries but is invariant under a lattice of translations. Up to isometry and homothety, this is the unique example with no continuous symmetries.

The Communicative Dimension and Security in Asia-Pacific: A communicative-viewing proposal for reform of the Japanese Intelligence Services

The postwar development of the Intelligence Services in Japan has been based on two contrasting models: the centralized model of the USA and the collegiality of UK, neither of which has been fully developed. This has led to clashes of institutional competencies and poor anticipation of threats towards national security. This problem of opposing models has been partially overcome through two dimensions: externally through the cooperation with the US Intelligence Service under the Treaty of Mutual Cooperation and Security; and internally though the pre-eminence in the national sphere of the Department of Public Safety. However, the emergence of a new global communicative dimension requires that a communicative-viewing remodeling of this dual model is necessary due to the increasing capacity of the individual actors to determine the dynamics of international events. This article examines these challenges for the Intelligence Services of Japan and proposes a reform based on this new global communicative dimension.

Two problems from the Polishchuk and Positselski book on Quadratic algebras

In the book ’Quadratic algebras’ by Polishchuk and Positselski [23] algebras with a small number of generators (n = 2, 3) are considered. For some number r of relations possible Hilbert series are listed, and those appearing as series of Koszul algebras are specified. The first case, where it was not possible to do, namely the case of three generators n = 3 and six relations r = 6 is formulated as an open problem. We give here a complete answer to this question, namely for quadratic algebras with dimA_1 = dimA_2 = 3, we list all possible Hilbert series, and find out which of them can come from Koszul algebras, and which can not. As a consequence of this classification, we found an algebra, which serves as a counterexample to another problem from the same book [23] (Chapter 7, Sec. 1, Conjecture 2), saying that Koszul algebra of finite global homological dimension d has dimA_1 > d. Namely, the 3-generated algebra A given by relations xx + yx = xz = zy = 0 is Koszul and its Koszul dual algebra A^! has Hilbert series of degree 4: HA! (t) = 1 + 3t + 3t^2 + 2t^3 + t^4, hence A has global homological dimension 4.

Fungi spores dimension matters in health effects: a methodology for more detail fungi exposure assessment

Health effects resulting from dust inhalation in occupational environments may be more strongly associated with specific microbial components, such as fungi, than to the particles. The aim of the present study is to characterize the occupational exposure to the fungal burden in four different occupational settings (two feed industries, one poultry and one waste sorting industry), presenting results from two air sampling methods – the impinger collector and the use of filters. In addition, the equipment used for the filter sampling method allowed a more accurate characterization regarding the dimension of the collected fungal particles (less than 2.5 μm size). Air samples of 300L were collected using the impinger Coriolis μ air sampler. Simultaneously, the aerosol monitor (DustTrak II model 8532, TSI®) allowed assessing viable microbiological material below the 2.5 μm size. After sampling, filters were immersed in 300 mL of sterilized distilled water and agitated for 30 min at 100 rpm. 150 μl from the sterilized distilled water were subsequently spread onto malt extract agar (2%) with chloramphenicol (0.05 g/L). All plates were incubated at 27.5 ºC during 5–7 days. With the impinger method, the fungal load ranged from 0 to 413 CFU.m-3 and with the filter method, ranged from 0 to 64 CFU.m-3. In one feed industry, Penicillium genus was the most frequently found genus (66.7%) using the impinger method and three more fungi species/genera/complex were found. The filter assay allowed the detection of only two species/genera/complex in the same industry. In the other feed industry, Cladosporium sp. was the most found (33.3%) with impinger method and three more species/genera/complex were also found. Through the filter assay four fungi species/genera/complex were found. In the assessed poultry, Rhyzopus sp. was the most frequently detected (61.2%) and more three species/genera/complex were isolated. Through the filter assay, only two fungal species/genera/complex were found. In the waste sorting industry Penicillium sp. was the most prevalent (73.6%) with the impinger method, being isolated two more different fungi species/genera/complex. Through the filter assay only Penicillium sp. was found. A more precise determination of occupational fungal exposure was ensured, since it was possible to obtain information regarding not only the characterization of fungal contamination (impinger method), but also the size of dust particles, and viable fungal particles, that can reach the worker ́s respiratory tract (filters method). Both methods should be used in parallel to enrich discussion regarding potential health effects of occupational exposure to fungi.

The third dimension: new developments in cell culture models for colorectal research

Cellular models are important tools in various research areas related to colorectal biology and associated diseases. Herein, we review the most widely used cell lines and the different techniques to grow them, either as cell monolayer, polarized two-dimensional epithelia on membrane filters, or as three-dimensional spheres in scaffoldfree or matrix-supported culture conditions. Moreover, recent developments, such as gut-on-chip devices or the ex vivo growth of biopsy-derived organoids, are also discussed. We provide an overview on the potential applications but also on the limitations for each of these techniques, while evaluating their contribution to provide more reliable cellular models for research, diagnostic testing, or pharmacological validation related to colon physiology and pathophysiology.

Two near-optimal layouts for trusslike bridge structures bearing uniform weight between supports

Although the primary objective on designing a structure is to support the external loads, the achievement of an optimal layout that reduces all costs associated with the structure is an aspect of increasing interest. The problem of finding the optimal layout for bridgelike structures subjected to a uniform load is considered. The problem is formulated following a theory on economy of frame structures, using the stress volume as the objective function and including the selection of appropriate values for statically indeterminate reactions. It is solved in a function space of finite dimension instead of using a general variational approach, obtaining near-optimal solutions. The results obtained with this profitable strategy are very close to the best layouts known to date, with differences of less than 2% for the stress volume, but with a simpler layout that can be recognized in some real bridges. This strategy could be a guide to preliminary design of bridges subject to a wide class of costs.

In-silico optimisation of two-dimensional high performance liquid chromatography for the determination of Australian methamphetamine seizure samples

In-silico optimisation of a two-dimensional high performance liquid chromatography (2D-HPLC) separation protocol has been developed for the interogation of methamphetamine samples including model, real world seizure, and laboratory synthesised samples. The protocol used Drylab® software to rapidly identify the optimum separation conditions from a library of chromatography columns. The optimum separation space was provided by the Phenomonex Kinetex PFP column (first dimension) and an Agilent Poroshell 120 EC-C18 column (second dimension). To facilitate a rapid 2D-HPLC analysis the particle packed C18 column was replaced with a Phenomenex Onyx Monolithic C18 withought sacrificing separation performance. The Drylab® optimised and experimental separations matched very closely, highlighting the robust nature of HPLC simulations. The chemical information gained from an intermediate methamphetamine sample was significant and complimented that generated from a pure seizure sample. The influence of the two-dimensional separation on the analytical figures of merit was also investigated. The limits of detection for key analytes in the second dimension determined for methamphetamine (4.59 × 10-⁴ M), pseudoephedrine (4.03 × 10-4 M), caffeine (5.16 × 10-⁴ M), aspirin (9.32 × 10-4 M), paracetamol (5.93 × 10-4 M) and procaine (2.02 × 10-3 M).