Two-way regionalized classification of multivariate datasets and its application to the assessment of hydrodynamic dispersion

Zones of mixing between shallow groundwaters of different composition were unravelled by two-way regionalized classification, a technique based on correspondence analysis (CA), cluster analysis (ClA) and discriminant analysis (DA), aided by gridding, map-overlay and contouring tools. The shallow groundwaters are from a granitoid plutonite in the Funda o region (central Portugal). Correspondence analysis detected three natural clusters in the working dataset: 1, weathering; 2, domestic effluents; 3, fertilizers. Cluster analysis set an alternative distribution of the samples by the three clusters. Group memberships obtained by correspondence analysis and by cluster analysis were optimized by discriminant analysis, gridded memberships as follows: codes 1, 2 or 3 were used when classification by correspondence analysis and cluster analysis produced the same results; code 0 when the grid node was first assigned to cluster 1 and then to cluster 2 or vice versa (mixing between weathering and effluents); code 4 in the other cases (mixing between agriculture and the other influences). Code-3 areas were systematically surrounded by code-4 areas, an observation attributed to hydrodynamic dispersion. Accordingly, the extent of code-4 areas in two orthogonal directions was assumed proportional to the longitudinal and transverse dispersivities of local soils. The results (0.7-16.8 and 0.4-4.3 m, respectively) are acceptable at the macroscopic scale. The ratios between longitudinal and transverse dispersivities (1.2-11.1) are also in agreement with results obtained by other studies.

Anatomopathological analysis of sentinel and nonsentinel lymph nodes in breast cancer: Hematoxylin-eosin versus immunohistochemistry

The authors compare the detection of metastases in sentinel lymph nodes (SLNs) and nonsentinel lymph nodes (NSLNs) using hematoxvlin-eosin (HE) staining versus immunohistochemistry (IHC). Thirty-six patients with breast carcinoma undergo exeresis of the primary tumor and of 50 SLNs and 491 NSLNs. Sentinel lymph nodes are sectioned into transverse slices of 2- to 3-mm thickness, and a cytologic smear and a frozen section were obtained from each slice. The slices are completely cut into serial sections at 100-mu m intervals. Two consecutive 4-mu m-thick sections are then obtained from each level and were prepared for HE staining and IHC. Nonsentinel lymph nodes are evaluated similarly to SLNs. The authors obtain 4076 SLN sections and 32 012 NSLN sections, fora total of 36 088 sections. A comparison of HE staining versus IHC based on the total number of sections shows a sensitivity of 93.8%, a negative predictive value of 98.9%, and an accuracy of 99.1 %. The values obtained by HE staining are similar to those obtained by IHC.

Mössbauer spectroscopic study of the early crystallization stage of iron(III) hydroxide particles

Mössbauer spectroscopy was used to investigate the early aging stage of iron(III) hydroxide sols prepared by oxidation of Fe(CO)5 in ethanolic solution, followed by vacuum drying at room temperature. One sample was composed of amorphous particles, while two other samples were partially crystallized, either as a result of solvent change or of spontaneous aging. The main results of Mössbauer measurements in the 80-320 K temperature range are: (a) partially crystallized particles exhibit a strong, S-shaped temperature dependence of the quadrupole splitting, in contrast to a weak and linear variation for amorphous particles; (b) the recoilless fraction temperature dependence is affected by vibration of the particles as a whole, with an effective force constant which is smaller for crystallized particles than for amorphous ones. Furthermore, the former exhibit anf-factor discontinuity near 0°C, which is attributed to melting of a surface layer built up during the crystallization process. © 1986.

Effects of protecting broccoli plants with nonwoven polypropyleno

This investigation was conducted between June and September, in an experimental area, whose coordinates are latitude 21°15'22 south and longitude 48°18'58 east, situated at a mean altitude of 575 m. The soil of the area is classified as Red Latossolo (Commission of Soils, 1960), Haplorthox soil. The effects of two cultivation systems: protection with nonwoven polypropyleno and in an open field, on broccoli cultivars 'Baron', 'Shigimori', 'Pinacco' were evaluated. The experiments were a randomized block experimental design, using a factorial arrangement of 3 (cultivars) x 2 (cultivation systems), with four replicates. The characteristics evaluated were precociousness, longitudinal and transverse diameters of broccoli heads, fresh mass of broccoli heads and number of leaves per plant. The 'Baron' cultivar was more precocious, having its harvest at 86 days after transplanting in both cultivation systems. 'Baron', despite being more precocious, had inferior results in relation to the other cultivars. The open field cultivation system was optimum for cultivars 'Shigimori' and 'Pinacco'.

Reinterpretation of Malvinoconularia cahuanotensis (Braniša and Vaněk) from the Devonian Altiplano and Western Andean Cordillera, Bolivia, South America

The holotype of Malvinoconularia cahuanotensis (Braniša and Vaněk) (Devonian, Bolivia), the type species of the monospecific genus Malvinoconularia Babcock et al., is redescribed and refigured. M. cahuanotensis exhibits several gross morphological features that together are uniquely shared with Reticulaconularia baini (Babcock and Feldmann). In both taxa, the transverse ribs are nodose, the inter-spaces bear longitudinal ridges (bars or crests) that are collinear (line up) across the transverse ribs, and the longitudinal centerline (midline) of the faces is marked by a subdued ridge. Additionally, the two species may also be similar in the anatomy and external ornament of the corner sulcus. The slightly undulose geometry of the transverse ribs of M. cahuanotensis also is exhibited by certain specimens of Reticulaconularia; however, whether this feature is primary or taphonomic in origin is unclear at present. Together, these similarities suggest that the genus Malvinoconularia probably is a junior synonym of the genus Reticulaconularia. © Asociación Paleontológica Argentina.

Effect of plastic film mulch on the production of butterhead lettuce cultivars under protected cultivation

The study was performed in a greenhouse with the aim of evaluating the production of butterhead lettuce cultivars with and without plastic film mulch in the summer. The cultivars studied were 'Elisa', 'Lídia', 'Herman' and 'Luísa'. The experimental design was a split plot, in which the main plot was plastic film mulch (with or without black polyethylene film) and the subplots were the cultivars, with three repetitions. The seedlings were grown in Styrofoam trays of 288 cells and transplanted 25 days after seeding in a space of 25 × 25 cm. Harvests were carried out 45 days after transplanting and the following variables were determined: fresh and dry weights of the aerial part, number of leaves per plant, plant height and the longitudinal and transverse diameters of the plant. Significant differences were found only among the cultivars for the characteristics studied, with no cover × cultivar interaction. Fresh weight of the aerial part of 'Lídia' (270.9 g) was greater than that of 'Herman' (142.5 g), but did not differ from those of 'Luísa' (229.8 g) or 'Elisa' (204.8). The dry weight of the aerial part of 'Lídia' (12.4 g) differed statistically only with respect to that of 'Herman' (7.9 g). The cultivars 'Luísa' and 'Elisa' had an aerial part dry weight of 11.4 and 11.2 g, respectively. The number of leaves per plant of the cultivars 'Luísa' (45.1) and 'Elisa' (43.0) was higher than for 'Herman' (24.05), but did not differ from that of the cultivar 'Lídia' (39.5). The mean transverse and longitudinal diameters, as well as the mean height of the plants, showed that 'Lídia', 'Elisa' and 'Luísa' had the greatest values. The cultivars 'Lídia', 'Elisa' and 'Luísa' were the most productive and plastic film mulch had no effect on lettuce production under protected cultivation.

Compatibility of grafting in the melon cv. bônus No. 2, and effects on production

Twelve rootstocks were evaluated: 1) pumpkin 'Big Power' (Cucurbita ntoschata); 2) pumpkin 'Seca' (Cucurbita moschata); 3) bottle gourd 'Longa' (Lagenaria siceraria); 4) 'Cachi' (Lagenaria siceraria); 5) bottle gourd 'Marimba' (Lagenaria siceraria); 6) 'Mogango' (Cucurbita maxima); 7) pumpkin 'Kirameki' (Cucurbita moschata); 8) pumpkin 'Caravela' (Cucurbita moschata); 9) pumpkin 'Shelper' (Cucurbita moschata); 10) 'Gherkin' (Cucumis anguria); 11) 'Loofah' (Luffa cylindrica); and 12) pumpkin 'Goianinha' (Cucurbita moschata) with respect to compatibility with melon yield, and the production and quality of fruits from cv. Bônus No. 2, non-grafted and grafted with 9 of these rootstocks (1, 2, 4, 5, 6, 7, 9, 10 and 11). The bottle gourd 'Marimba' provided the highest percentage of grafting success between the vine and rootstock. The rootstocks 1, 2, 3, 4 and 7 did not differ from bottle gourd 'Marimba', therefore also indicating good compatibility with the melon cv. Bônus No. 2. For height of the plants, it was shown in the first evaluation that rootstock 5 produced a greater height of the plant, differing only from rootstocks 7, 8, 9, 10 and 11 and non-grafted cv. Bônus No. 2. In the second evaluation, 'Big Power' showed the greatest value for height of the plant, differing only from combinations with 'Cachi', 'Mogango', 'Shelper' and 'Loofah'. With regard to number of leaves, in the first evaluation rootstocks 3, 4 and 6 had the greatest number of leaves, but in the second 4, 9 and 11 had the greatest. For dry weight of the stem, the greatest value was obtained with 'Mogango' in the first evaluation and with 'Big Power' in the second. For leaf area of the plants, a difference was found among the treatments only in the first evaluation, where the combination with bottle gourd 'Longa' showed a greater leaf area, but did not differ from the combinations with rootstocks 1, 4, 5 and 6. Differences were demonstrated among the treatments only for the transverse diameter of the fruit, where the combination with rootstock bottle gourd 'Marimba' showed the greatest value, differing only from the combination with 'Gherkin'. There were no significant differences for the mean longitudinal diameter, pulp thickness and total soluble solids among the treatments studied.

Measurement of the underlying event activity in pp collisions at √s = 0.9 and 7 TeV with the novel jet-area/median approach

The first measurement of the charged component of the underlying event using the novel jet-area/median approach is presented for proton-proton collisions at centre-of-mass energies of 0.9 and 7 TeV. The data were recorded in 2010 with the CMS experiment at the LHC. A new observable, sensitive to soft particle production, is introduced and investigated inclusively and as a function of the event scale defined by the transverse momentum of the leading jet. Various phenomenological models are compared to data, with and without corrections for detector effects. None of the examined models describe the data satisfactorily. © 2012 SISSA.

Measurement of angular correlations of jets at s=1.96 TeV and determination of the strong coupling at high momentum transfers

We present a measurement of the average value of a new observable at hadron colliders that is sensitive to QCD dynamics and to the strong coupling constant, while being only weakly sensitive to parton distribution functions. The observable measures the angular correlations of jets and is defined as the number of neighboring jets above a given transverse momentum threshold which accompany a given jet within a given distance δR in the plane of rapidity and azimuthal angle. The ensemble average over all jets in an inclusive jet sample is measured and the results are presented as a function of transverse momentum of the inclusive jets, in different regions of δR and for different transverse momentum requirements for the neighboring jets. The measurement is based on a data set corresponding to an integrated luminosity of 0.7 fb -1 collected with the D0 detector at the Fermilab Tevatron Collider in pp- collisions at s=1.96 TeV. The results are well described by a perturbative QCD calculation in next-to-leading order in the strong coupling constant, corrected for non-perturbative effects. From these results, we extract the strong coupling and test the QCD predictions for its running over a range of momentum transfers of 50-400 GeV. © 2012 Elsevier B.V.

Observation of a diffractive contribution to dijet production in proton-proton collisions at √s=7 TeV

The cross section for dijet production in proton-proton collisions at √s=7 TeV is presented as a function of a variable that approximates the fractional momentum loss of the scattered proton in single-diffractive events. The analysis is based on an integrated luminosity of 2.7 nb-1 collected with the CMS detector at the LHC at low instantaneous luminosities, and uses events with jet transverse momentum of at least 20 GeV. The dijet cross section results are compared to the predictions of diffractive and nondiffractive models. The low- data show a significant contribution from diffractive dijet production, observed for the first time at the LHC. The associated rapidity gap survival probability is estimated. © 2013 CERN. Published by the American Physical Society.

Search for supersymmetry in final states with missing transverse energy and 0, 1, 2, or ≥3 b-quark jets in 7 TeV pp collisions using the variable α T

A search for supersymmetry in final states with jets and missing transverse energy is performed in pp collisions at a centre-of-mass energy of s=7 TeV. The data sample corresponds to an integrated luminosity of 4.98 fb-1 collected by the CMS experiment at the LHC. In this search, a dimensionless kinematic variable, α T, is used as the main discriminator between events with genuine and misreconstructed missing transverse energy. The search is performed in a signal region that is binned in the scalar sum of the transverse energy of jets and the number of jets identified as originating from a bottom quark. No excess of events over the standard model expectation is found. Exclusion limits are set in the parameter space of the constrained minimal supersymmetric extension of the standard model, and also in simplified models, with a special emphasis on compressed spectra and third-generation scenarios.[Figure not available: see fulltext.] © 2013 CERN for the benefit of the CMS Collaboration.

Active vibration control using delayed resonant feedback

Delayed feedback (DF) control is a well-established technique to suppress single frequency vibration of a non-minimum phase system. Modal control is also a well-established technique to control multiple vibration modes of a minimum phase system. In this paper these techniques are combined to simultaneously suppress multiple vibration modes of a non-minimum phase system involving a small time delay. The control approach is called delayed resonant feedback (DRF) where each modal controller consists of a modal filter to extract the target mode signal from the vibration response, and a phase compensator to account for the phase delay of the mode. The methodology is first discussed using a single mode system. A multi-mode system is then studied and experimental results are presented to demonstrate the efficacy of the control approach for two modes of a beam. It is shown that the system behaves as if each mode under control has a dynamic vibration absorber attached to it, even though the actuator and the sensor are not collocated and there is a time delay in the control system. © 2013 IOP Publishing Ltd.

Search for supersymmetry in hadronic final states with missing transverse energy using the variables αT and b-quark multiplicity in pp collisions at {Mathematical expression}

An inclusive search for supersymmetric processes that produce final states with jets and missing transverse energy is performed in pp collisions at a centre-of-mass energy of 8 TeV. The data sample corresponds to an integrated luminosity of 11.7 fb-1 collected by the CMS experiment at the LHC. In this search, a dimensionless kinematic variable, αT, is used to discriminate between events with genuine and misreconstructed missing transverse energy. The search is based on an examination of the number of reconstructed jets per event, the scalar sum of transverse energies of these jets, and the number of these jets identified as originating from bottom quarks. No significant excess of events over the standard model expectation is found. Exclusion limits are set in the parameter space of simplified models, with a special emphasis on both compressed-spectrum scenarios and direct or gluino-induced production of third-generation squarks. For the case of gluino-mediated squark production, gluino masses up to 950-1125 GeV are excluded depending on the assumed model. For the direct pair-production of squarks, masses up to 450 GeV are excluded for a single light first- or second-generation squark, increasing to 600 GeV for bottom squarks. © 2013 CERN for the benefit of the CMS collaboration.

Estudo experimental de vigas de alvenaria estrutural sujeitas à flexão

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Transverse maxillary and mandibular growth during and after Bionator therapy: study with metallic implants

INTRODUCTION: This study evaluated posteroanterior cephalograms before and after treatment and long term follow-up of Class II division 1 patients treated with bionator. OBJECTIVE: The objective was to demonstrate the transverse growth of maxilla and mandible during and after bionator therapy. METHODS: Measurement of transverse dimensions between posterior maxillary and mandibular implants, as well as the distances between the buccal, gonial and antegonial points were recorded. Measurements were analyzed at three periods: T1 = before bionator therapy, T2 = after bionator therapy and T3 = 5.74 years after T2. RESULTS: There was statistically significant transverse increase due to growth and/or treatment for all variables, except for the distance between the anterior maxillary implants. CONCLUSIONS: During the study period only the anterior maxillary area did not show transverse growth.