Influence of the quantity of coloring agent in bleaching gels activated with LED/laser appliances on bleaching efficiency

The aim of this study was to assess the influence of the quantity of coloring agent on the bleaching efficiency of gels containing 35% H2O2. Sixty human third molars were sectioned mesiodistally, darkened in a coffee solution and sectioned in the occlusal-cervical direction, resulting in mesial (not bleached) and distal halves (bleached). They were distributed into three groups: Whiteness HP, Total Bleach, and Whiteform Perox Red Gel; and subdivided into four sub-groups: no coloring agent, manufacturer's standard, double the standard, and triple the standard. The gels were activated with light-ermitting diode/laser appliances. The images were analyzed with the Adobe Photoshop program (deltaEL*a*b*). The variation was submitted to the ANOVA test (two factors: type of gel and quantity of coloring agent) and Tukey test. Differences were observed for the quantity of coloring agent. The mean (+/-SD) was determined for each quantity of coloring used: no coloring agent -6.85 (+/-2.26)a, manufacturer's standard -794 (+/-2.55)ab, double the standard -8.65 (+/-2.47)b, triple the standard -9.05 (+/-2.72)b. In conclusion, the standard quantity of coloring agent did not provide significantly more intense bleaching than when it was completely absent. The use of double and triple the amount provided greater bleaching than that observed for the gel without coloring agent. No significant differences were observed between the tested gels.

Influence of Nd:YAG or Er:YAG laser surface treatment on microtensile bond strength of indirect resin composites to resin cement. Lasers surface treatment of indirect resin composites

This study evaluated the influence of the surface pretreatment of indirect resin composite (Signum, Admira Lab and Sinfony) on the microtensile bond strength of a resin cement. Sixty samples made of each brand were divided into 6 groups, according to surface treatment: (1) control; (2) controlled-air abrasion with Al2O3; (3) Er:YAG Laser 200 mJ, 10 Hz, for 10s; (4) Er: YAG Laser 300 mJ, 10 Hz, for 10 s; (5) Nd:YAG 80 mJ, S15Hz for 1 min; (6) Nd:YAG 120mJ, 15 Hz for 1 min. After treatments, all the groups received an application of 37% phosphoric acid and adhesive. The pair of blocks of the same brand were cemented to each other with dual resin cement. The blocks were sectioned to obtain resin-resin sticks (1 x1 mm) and analyzed by microtensile bond testing. The bond strength values were statistically different, irrespective of the surface treatment performed, with highest values for Sinfony (43.81 MPa) and lowest values for Signum (32.33 MPA). The groups treated with the Nd:YAG laser showed the lowest bond strength values and power did not interfere in the results, both for Nd:YAG laser and Er:YAG. Controlled-air abrasion with Al203 is an efficient surface treatment method and the use of the Nd:YAG and Er:YAG lasers reduced bond strength, irrespective of the intensity of energy used.

Effects of dental bleaching on the color, translucency and fluorescence properties of enamel and dentin

The objective of this study was to evaluate the color, translucency and fluorescence of bovine enamel and dentin submitted to different bleaching modalities. Pairs of enamel and dentin discs (3 mm in diameter) were obtained from 150 bovine teeth. In 75 of the pairs, one specimen had the enamel removed (Dentin Group). The dentin was removed from one specimen of the remaining 75 pairs (Enamel Group) and the other specimen was left unaltered (Enamel + Dentin). The evaluation of color, translucency and fluorescence was performed with a spectrophotometer using the CIE L* a* b*. Each group was subdivided into three subgroups: Control, composed of specimens that were not bleached, and two experimental subgroups, bleached with either 10% carbamide peroxide (CP10%) or 35% hydrogen peroxide (HP35%). The CP10% bleaching gel was applied 2 h/day for 14 days. The HP35% bleaching agent was applied using two applications of 30 min each, with a one week interval between each application. When not being bleached, the specimens were immersed in artificial saliva. The color, translucency and fluorescence ratings were assessed using spectrophotometry 7 days after the treatment. Regarding color, significant differences were found between bleaching techniques in the groups Enamel and Enamel + Dentin, with a higher color difference for HP35%. Bleaching did not change the translucency of the dental tissues. There were significant differences for fluorescence for the HP35% subgroups of Dentin and Enamel + Dentin, and for the CP10% subgroup of Enamel. Dental bleaching changed the color and fluorescence of the dental tissues, however translucency was not affected.

Effect of chemical activation of 10% carbamide peroxide gel in tooth bleaching

This study aimed to evaluate the efficacy of chemical agents to increase the bleaching effectiveness of 10% carbamide peroxide. Two hundred and ninety enamel-dentin discs were prepared from bovine incisors. The color measurement was performed by a spectrophotometer using the CIE L*a*b*system. The groups were divided according to the bleaching treatment: negative control group (NC): without bleaching; positive control group (PC): bleached with 10% carbamide peroxide gel without any chemical activator; Manganese gluconate (MG); Manganese chloride (MC); Ferrous gluconate (FG); Ferric chloride (FC); and Ferrous sulphate (FS). Three different concentrations (MG, MC, FG, FC: 0.01, 0.02 and 0.03% w/w; FS: 0.001, 0.002 and 0.003% w/w) for each agent were tested. The bleaching gel was applied on the specimens for 8 h, after which they were immersed in artificial saliva for 16 h, during 14 days. Color assessments were made after 7 and 14 days. The data were analyzed by repeated measures analysis of variance and Tukey's test (5%). Generally, the test groups were unable to increase the bleaching effect (ΔE) significantly compared to the PC group. Only for ΔL, significant higher values compared to the PC group could be seen after 7 days in groups MG (0.02%), and FS (0.002 and 0.003%). The NC group showed significantly lower values than all tested groups. It was concluded that for home bleaching procedures, the addition of chemical activators did not produce a bleaching result significantly higher than the use of 10% carbamide peroxide without activation, and that the concentration of chemical activators used did not significantly influence the effectiveness of treatment.

Effect of incorporation of remineralizing agents into bleaching gels on the microhardness of bovine enamel in situ

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Influence of simulated pulpal pressure on efficacy of bleaching gels

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Effect of home-bleaching gels modified by calcium and/or fluoride and the application of nano-hydroxyapatite paste on in vitro enamel erosion susceptibility

This in vitro study compared the effect of bleaching agents modified by the addition of calcium and/or fluoride and the application of a nano-hydroxyapatite paste after bleaching, on the susceptibility of enamel to erosion. Bovine enamel cylindrical samples (3 mm diameter) were assigned to six groups (n = 20 specimens/group) according to the bleaching agent: no bleaching (C-control), 7.5% hydrogen peroxide gel (HP), HP with 0.5% calcium gluconate (HP+Ca), HP with 0.2% sodium fluoride (HP+F), HP with calcium and fluoride (HP+Ca+F) and HP followed by the application of a nano-hydroxyapatite agent (HP+NanoP). The gels were applied on the enamel surface (1 h) followed by cyclic erosive challenges (Sprite Zero®-2 min), for 14 days. The paste was applied after bleaching for 5 min (HP+NanoP). The enamel surface alteration was measured by contact profilometry (µm) (after 7 and 14 days). C-control (mean ± SD: 2.29 ± 0.37 at 7 days/4.86 ± 0.72 at 14 days) showed significantly lower loss compared to the experimental groups. HP+Ca (3.34 ± 0.37/6.75 ± 1.09) and HP+F (4.49 ± 0.92/7.61 ± 0.90) presented significantly lower enamel loss than HP (4.18 ± 0.50/10.30 ± 1.58) only for 14 days and HP+Ca+F (4.92 ± 1.03/8.12 ± 1.52) showed values similar to the HP+F group. The HP+NanoP (5.51 ± 1.04/9.61 ± 1.21) resulted in enamel loss similar to the HP after 14 days. It was found that 7.5% hydrogen peroxide increased the susceptibility of enamel to erosion. The addition of calcium or fluoride to the bleaching gel reduced the erosion effect, while the nano-hydroxyapatite agent did not provide any protective effect.

Influence of whitening gel application protocol on dental color change

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Do Higher Temperatures Increase Growth in the Nocturnal Gecko Homonota darwini (Gekkota: Phyllodactylidae)? A Skeletochronological Assessment Analyzed at Temporal and Geographic Scales

Recent studies predict that several lineages of tropical animals are at particular risk given current estimates of global climate change. Yet, much uncertainty exists on the effects of climate shifts in ectothermic species from cool temperate regions such as Patagonia. In this study, we focus on the impact of environmental temperature on growth, age at sexual maturity, and life-span of the Patagonian gecko Homonota darwini. Skeletochronological methods were used to assess the bone growth rates Of individuals from three populations at different geographic and temporal scales: two populations from Chubut (warm site; 1941 and 2010) and one population from Rio Negro (cold site; 1997-1998). Populations displayed similar bone arrangement and the growth patterns fit a von Bertalanffy curve. Three populations attained reproductive size at a minimum age of 3 yr, but at the cold site two specimens were shown to mature in 4 yr. We found no differences in juvenile growth rates in body size or bone zone width between juveniles of 1 to 3 yr of age from the 1941 warm site and the 2010 warm site. However, these traits appeared to be higher at these two warm sites than at the cold site, which is consistent with the climatic differences among the three localities. Our results suggest that higher temperatures positively affect growth, denoting that global warming might benefit H. darwini, especially the southern populations.

Considerations for Assessing Maximum Critical Temperatures in Small Ectothermic Animals: Insights from Leaf-Cutting Ants

The thermal limits of individual animals were originally proposed as a link between animal physiology and thermal ecology. Although this link is valid in theory, the evaluation of physiological tolerances involves some problems that are the focus of this study. One rationale was that heating rates shall influence upper critical limits, so that ecological thermal limits need to consider experimental heating rates. In addition, if thermal limits are not surpassed in experiments, subsequent tests of the same individual should yield similar results or produce evidence of hardening. Finally, several non-controlled variables such as time under experimental conditions and procedures may affect results. To analyze these issues we conducted an integrative study of upper critical temperatures in a single species, the ant Atta sexdens rubropiosa, an animal model providing large numbers of individuals of diverse sizes but similar genetic makeup. Our specific aims were to test the 1) influence of heating rates in the experimental evaluation of upper critical temperature, 2) assumptions of absence of physical damage and reproducibility, and 3) sources of variance often overlooked in the thermal-limits literature; and 4) to introduce some experimental approaches that may help researchers to separate physiological and methodological issues. The upper thermal limits were influenced by both heating rates and body mass. In the latter case, the effect was physiological rather than methodological. The critical temperature decreased during subsequent tests performed on the same individual ants, even one week after the initial test. Accordingly, upper thermal limits may have been overestimated by our (and typical) protocols. Heating rates, body mass, procedures independent of temperature and other variables may affect the estimation of upper critical temperatures. Therefore, based on our data, we offer suggestions to enhance the quality of measurements, and offer recommendations to authors aiming to compile and analyze databases from the literature.

Evolution of form and function: morphophysiological relationships and locomotor performance in tropidurine lizards

Locomotor capacity is often considered an excellent measure of whole animal performance because it requires the integrated functioning of many morphological, physiological (and biochemical) traits. However, because studies tend to focus on either structural or functional suits of traits, we know little on whether and how morphological and physiological traits coevolve to produce adequate locomotor capacities. Hence, we investigate the evolutionary relationships between morphological and physiological parameters related to exercise physiology, using tropidurine lizards as a model. We employ a phylogenetic principal component analysis (PCA) to identify variable clusters (factors) related to morphology, energetic metabolism and muscle metabolism, and then analyze the relationships between these clusters and measures of locomotor performance, using two models (star and hierarchical phylogenies). Our data indicate that sprint performance is enhanced by simultaneous evolutionary tendencies affecting relative limb and tail size and physiological traits. Specifically, the high absolute sprint speeds exhibited by tropidurines from the sand dunes are explained by longer limbs, feet and tails and an increased proportion of glycolytic fibers in the leg muscle, contrasting with their lower capacity for overall oxidative metabolism [principal component (PC1)]. However, when sprint speeds are corrected for body size, performance correlates with a cluster (PC3) composed by moderate loads for activity metabolic rate and body size. The simultaneous measurement of morphological and physiological parameters is a powerful tool for exploring patterns of coadaptation and proposing morphophysiological associations that are not directly predictable from theory. This approach may trigger novel directions for investigating the evolution of form and function, particularly in the context of organismal performance.

Vocal and territorial behavior in the Smith frog (Hypsiboas faber): Relationships with plasma levels of corticosterone and testosterone

The possible trade-off between the roles of glucocorticoids as facilitators of energy substrate mobilization and neural inhibitors of sexual behavior during breeding season is under debate. We studied the relationship between calling and territorial behavior with plasma levels of corticosterone (CORT) and plasma levels of testosterone (T) across the breeding season of Hypsiboas faber, a large and territorial Neotropical treefrog. We investigated these relationships through focal observations of males calling naturally, followed by blood sampling for hormonal radioimmunoassay. We additionally used an experimental approach, which consisted of broadcasting recorded advertisement calls for 10 min to simulate an invasion in the territory of the focal subjects, followed by behavioral observation and blood sampling for hormonal radioimmunoassay. Results showed a pattern of co-variation between CORT and T across the breeding season. Furthermore, individual variation in CORT and T was related to different aspects of behavior: individuals with higher CORT showed higher calling rates, and individuals with higher steroid levels, mainly T, showed higher responsivity to social stimulation by other males in the chorus. Experimental simulation of territorial intrusion by using playback of advertisement calls of this species did not elicit consistent changes in agonistic behavior and CORT, but decreased T in focal males. (C) 2012 Elsevier Inc. All rights reserved.

Estudio y diseño: renderizado volumétrico con AMILab

Máster Universitario en Sistemas Inteligentes y Aplicaciones Numéricas en Ingeniería (SIANI)

Sistema de vigilancia autónomo multiagente

[ES] En este proyecto se ha llevado a cabo el análisis, diseño e implementación de un software para la gestión y monitorización de sistemas de cámaras con el objetivo de su uso en la vídeo vigilancia. El propósito de este software es asistir a un operador humano en las labores de supervisión de zonas monitorizadas. Se trata de un software con interfaz multiplataforma y multihilos capaz de manejar un conjunto de cámaras estacionarias (sin importar tipo y marca) en escenarios interiores o exteriores. Durante la realización de este PFC se han estudiado y tratado problemas relacionado con las interfaces perceptuales hombre-máquina, técnicas de detección y seguimiento de objetos, manejos de base de datos, etc., con el objetivo de obtener un software modulado, eficiente y robusto.

La novela de la violencia política en el Perú desde la noción de "revuelta" El caso de Retablo (2004)

Revuelta es un concepto desarrollado por Julia Kristeva en Sentido y sinsentido de la revuelta (1998), El porvenir de la revuelta (1999) y La revuelta íntima (2001). Desde un abordaje que atraviesa lo etimológico, la literatura, la filosofía y el psicoanálisis, da cuenta de los sentidos y posibilidades políticas de la revuelta como expresión pulsional que permite revelar la memoria y recomenzar el sujeto (Bustos 2008: 7). Una lectura de la narrativa de la violencia política en el Perú desde la perspectiva de la revuelta kristeviana consistiría en explorar la memoria de la violencia a través de los relatos que sobre ella circulan en el presente con la finalidad de contrastar versiones diferentes y antagónicas a la hegemónica, y para subvertir la idea de que solo existe una versión de los hechos, es decir, para socavar las interpretaciones unilaterales sobre la violencia política y así ceder espacio a una versión más integral que tampoco desee perpetuarse sino que quienes la construyen sean conscientes de lo provisoria y temporal que debería ser, pues un constante estado de alerta evitaría la perpetuación de un discurso presentado como la memoria oficial del conflicto armado interno. En la exploración crítica del pasado y en la recuperación de la experiencia subjetiva, radica la utilidad del concepto de revuelta para analizar las representaciones de la violencia política en las novelas que sobre este proceso se han escrito recientemente. El propósito de este artículo consiste en analizar la novela Retablo (2004) del escritor peruano Julián Pérez Huarancca con la finalidad de reconocer cómo opera la revuelta kristeviana en la reconstrucción de la memoria individual y colectiva de la violencia política realizada por el narrador-personaje y al efecto de la revuelta sobre la ciudad letrada