The prevention of mental disorders in young people

The prevention of some mental disorders in young people appears to be possible. Several small and medium randomised controlled trials show that some anxiety, affective and substance-use disorders can be prevented. These trials show that the interventions are efficacious, but whether they will be effective in routine practice is not known. The evidence is sufficiently good to warrant a large community trial in which the roll-out is staged and school communties evaluated before and after the roll-out.

A strategy to fill gaps in soil survey over large spatial extents: an example from the Murray-Darling basin of Australia

We re-mapped the soils of the Murray-Darling Basin (MDB) in 1995-1998 with a minimum of new fieldwork, making the most out of existing data. We collated existing digital soil maps and used inductive spatial modelling to predict soil types from those maps combined with environmental predictor variables. Lithology, Landsat Multi Spectral Scanner (Landsat MSS), the 9-s digital elevation model (DEM) of Australia and derived terrain attributes, all gridded to 250-m pixels, were the predictor variables. Because the basin-wide datasets were very large data mining software was used for modelling. Rule induction by data mining was also used to define the spatial domain of extrapolation for the extension of soil-landscape models from existing soil maps. Procedures to estimate the uncertainty associated with the predictions and quality of information for the new soil-landforms map of the MDB are described. (C) 2002 Elsevier Science B.V. All rights reserved.

Testing market efficiency: Evidence from the NFL sports betting market

This article examines the efficiency of the National Football League (NFL) betting market. The standard ordinary least squares (OLS) regression methodology is replaced by a probit model. This circumvents potential econometric problems, and allows us to implement more sophisticated betting strategies where bets are placed only when there is a relatively high probability of success. In-sample tests indicate that probit-based betting strategies generate statistically significant profits. Whereas the profitability of a number of these betting strategies is confirmed by out-of-sample testing, there is some inconsistency among the remaining out-of-sample predictions. Our results also suggest that widely documented inefficiencies in this market tend to dissipate over time.

Push-out Bond Strength of Fiber Posts Luted with Unfilled Resin Cement

Purpose: The study evaluates the behavior of different adhesive systems and resin cements in fiber post placement, with the intent to clarify the possible role of unfilled resin as a luting material for fiber posts. Materials and Methods: Two luting agents (Dual-Link and Unfilled Resin) for cementing fiber posts into root canals were applied either with All-Bond 2 or One-Step Plus, or without an adhesive system, and challenged with the push-out test. Slices of roots restored with posts were loaded until post segment extrusion in the apical-coronal direction. Failure modes were analyzed under SEM. Results: Push-out strength was significantly influenced by the luting agent (p < 0.05), but not by the bonding strategy (p > 0.05). The best results were obtained in combination with Unfilled Resin with One-Step Plus. Dual-Link groups failed mainly cohesively within the cement, while Unfilled Resin demonstrated more adhesive fracture at the post interface. Conclusion: The results of this study support the hypothesis that adhesive unfilled resin application is essential for achieving high bond strength to radicular dentin.

Push-out strength of methacrylate resin-based sealers to root canal walls

P>Aim To assess the push-out strength of Epiphany SE, Epiphany and Hybrid Root SEAL to the dentine walls of root canals. Methodology Sixty roots of canines were prepared and distributed to six groups (n = 10) according to the filling material: GI - Epiphany SE, GII - Epiphany primer and sealer, GIII - Epiphany primer, sealer and resinous solvent, GIV - Clearfil DC Bond and Epiphany sealer, GV - Clearfil, Epiphany sealer and solvent and GVI - Hybrid Root SEAL. Resilon cones were used in all groups. Roots were sectioned transversally to obtain three slices from each third. One slice was subjected to the push-out test (MPa), and results were analysed by anova and Tukey`s test (P < 0.05). The other two slices were prepared for scanning electron microscopy (SEM). Failure mode was also analysed. Results A statistically significant difference (P < 0.05) occurred between Hybrid Root SEAL (5.27 +/- 2.07) and the other materials, GI (0.40 +/- 0.23), GII (0.78 +/- 0.45), GIII (0.57 +/- 0.28), GIV (0.40 +/- 0.24) and GV (0.50 +/- 0.41), which did not differ significantly from each other (P > 0.05). Adhesive failures predominated in groups I, II, IV and V, whilst mixed and cohesive failures were the most frequent in groups III and VI, respectively. There were gaps in the adhesive interface of GI and GII, continuity areas of the filling material with dentine in GIV and GV and good adaptation of the interface of GVI. Conclusion Hybrid Root SEAL had greater push-out strength to root canal dentine than Epiphany SE and Epiphany. The use of primer, solvent and adhesive system did not influence the adhesion of Epiphany.

Influence of Filling Materials on the Bonding Interface of Thin-walled Roots Reinforced with Resin and Quartz Fiber Posts

Introduction: A common complication during the restoration of severely destroyed teeth is the loss of coronal root dentine. The aim of this study was to evaluate the influence of different sealers on the bonding interface of weakened roots reinforced with resin and fiber posts. Methods: Sixty extracted maxillary canines were used. The crowns were removed, and the thickness of root dentine was reduced in the experimental (n = 40) and positive control (n = 10) groups. The specimens of experimental group were assigned to four subgroups (n = 10) according to the filling material: gutta-percha + Grossmann`s sealer, gutta-percha + AH Plus (Dentsply De Trey Gmbh, Konstanz, Germany), gutta-percha + Epiphany (Pentron Clinical Technologies, Wallingford, CT), and Resilon (Resilon Research LLC, Madison, CT) + Epiphany. In the negative control group (n = 10), canals were not filled. After post space preparation, the roots were restored with composite resin light-activated through a translucent fiber post. After 24 hours, specimens were transversally sectioned into 1-mm-thick slices. Push-out test and scanning electron microscopic (SEM) analyses of different regions were performed. Data from push-out test were analyzed by using Tukey post hoc multiple comparison tests. The percentage of failure type was calculated. Data from SEM analysis were compared by Friedman and Kruskal-Wallis tests (alpha = 0.05). Results: The mean bond strength was significantly higher in the negative control group as compared with the other groups (P < .05). In all groups, the most frequent type of failure was adhesive. Overall, apical and middle regions presented a lower density of resin tags than the coronal region (P < .05). Conclusions: The push-out bond strength was not affected by sealer or region. The canal region affected significantly the resin tag morphology and density at the bonding interface. (J Endod 2011;37:531-537)

Influence of endodontic sealers on the bond strength of carbon fiber posts

Objective: The aim of this study was to verify the influence of endodontic sealers on the bond strength of an adhesive system and a resin cement used for carbon posts cementation. Methods: Thirty extracted human premolars were instrumented and randomly divided into three groups according to the tested sealer: EndoFill, Sealapex, or EndoREZ. Specimens were stored at 37 degrees C. After 48 h, half of specimens were prepared to receive the post and the others after 7 days. The posts were cemented with Adper Single Bond/Rely X ARC and stored in distilled water at 37 degrees C for 7 days. After this period, the specimens were sectioned in three slices (coronal, middle, and apical). The push-out test was performed in a universal machine and the debonded area was examined in a stereomicroscope. Results: Data were submitted ANOVA and Tukey test (alpha = 0.05). The EndoFill showed lower bond strength than other sealers (p < 0.01). The EndoREZ sealer was statistically greater than other groups for coronal and middle portions and similar for apical portion (P > 0.05). Coronal and middle portions showed the best results for all groups, mainly when the canal preparation was performed after 48 h (p < 0.01). Mixed failure occurs with more frequency (55.6%) followed by failure in adhesive-dentin interface (34.4%) and adhesive-post interface (10.0%). Conclusion: The use of EndoREZ sealer promoted higher bond strength in root coronal and middle portions when carbon post was fixed with a resin cement. (C) 2007 Wiley Periodicals, Inc.

Chemically and morphologically identifiable glomeruli in the rat olfactory bulb

Primary olfactory neurons that express the same odorant receptor are distributed mosaically throughout the olfactory neuroepithelium lining the nasal cavity, yet their axons converge and form discrete glomeruli in the olfactory bulb. We previously proposed that cell surface carbohydrates mediate the sorting out and selective fasciculation of primary olfactory axons en route to glomeruli. If this were the case, then axons that terminate in the same glomerulus would express the same complement of cell surface carbohydrates. In this study, we examined the expression of a novel carbohydrate (NOC-3) on neural cell adhesion molecule in the adult rat olfactory system. NOC-3 was expressed by a subset of neurons distributed throughout the olfactory neuroepithelium. The axons of these neurons entered the nerve fiber layer and terminated in a subset of glomeruli. It is interesting to note that we identified three unusually large glomeruli in the lateral, ventrolateral, and ventromedial olfactory bulb that were innervated by axons expressing NOC-3. NOC-3-expressing axons sorted out and fasciculated into discrete fascicles prior to entering these glomeruli. Each of these glomeruli was in a topographically fixed position in the olfactory bulbs of the same animal as well as in different animals, and their lengths were approximately 10% of the total length of the bulb. They could be identified reliably by both their topographical position and their unique morphology. These results reveal that axons expressing the same cell surface carbohydrates consistently target the same topographically fixed glomeruli, which supports a role for these molecules in axon navigation in the primary olfactory nerve pathway. J. Comp. Neurol. 436: 497-507, 2001. (C) 2001 Wiley-Liss, Inc.

Sorting and convergence of primary olfactory axons are independent of the olfactory bulb

Primary olfactory axons expressing the same odorant receptor gene sort out and converge to fixed sites in the olfactory bulb. We examined the guidance of axons expressing the P2 odorant receptor when they were challenged with different cellular environments in vivo. In the mutant extratoes mouse, the olfactory bulb is lacking and is replaced by a fibrocellular mass. In these animals, primary olfactory axons form glomerular-like loci despite the absence of normal postsynaptic targets. P2 axons are able to sort out from other axons in this fibrocellular mass and converge to form loci of like axons. The sites of these loci along mediolateral and ventrodorsal axes were highly variable. Similar convergence was observed for larger subpopulations of axons expressing the same cell surface carbohydrates. The sorting out and convergence of like axons also occurred during regeneration following bulbectomy. Olfactory axon behaviour in these models demonstrates that sorting and convergence of axons are independent of the target, which instead provides distinct topographic cues for guidance. (C) 2003 Wiley-Liss, Inc.

Evidence for a QTL on chromosome 19 influencing LDL cholesterol levels in the general population

The genetic basis of cardiovascular disease (CVD) with its complex etiology is still largely elusive. Plasma levels of lipids and apolipoproteins are among the major quantitative risk factors for CVD and are well-established intermediate traits that may be more accessible to genetic dissection than clinical CVD end points. Chromosome 19 harbors multiple genes that have been suggested to play a role in lipid metabolism and previous studies indicated the presence of a quantitative trait locus (QTL) for cholesterol levels in genetic isolates. To establish the relevance of genetic variation at chromosome 19 for plasma levels of lipids and apolipoproteins in the general, out-bred Caucasian population, we performed a linkage study in four independent samples, including adolescent Dutch twins and adult Dutch, Swedish and Australian twins totaling 493 dizygotic twin pairs. The average spacing of short-tandem-repeat markers was 6 - 8 cM. In the three adult twin samples, we found consistent evidence for linkage of chromosome 19 with LDL cholesterol levels ( maximum LOD scores of 4.5, 1.7 and 2.1 in the Dutch, Swedish and Australian sample, respectively); no indication for linkage was observed in the adolescent Dutch twin sample. The QTL effects in the three adult samples were not significantly different and a simultaneous analysis of the samples increased the maximum LOD score to 5.7 at 60 cM pter. Bivariate analyses indicated that the putative LDL-C QTL also contributed to the variance in ApoB levels, consistent with the high genetic correlation between these phenotypes. Our study provides strong evidence for the presence of a QTL on chromosome 19 with a major effect on LDL-C plasma levels in outbred Caucasian populations.

Out-of-plane behavior of masonry infill walls

In order to investigate the out-of-plane behaviour of masonry infill walls, quasi-static testing was performed on a masonry infill walls built inside a reinforced concrete frame by means of an airbag system to apply the uniform out-of-plane load to each component of the infill. The main advantage of this testing setup is that the out-of-plane loading can be applied more uniformly in the walls, contrarily to point load configuration. The test was performed under displacement control by selecting the mid-point of the infill as control point. Input and output air in the airbag was controlled by using a software to apply a specific displacement in the control point of the infill wall. The effect of the distance between the reaction frame of the airbag and the masonry infill on the effective contact area was previously analysed. Four load cells were attached to the reaction frame to measure the out-of-plane force. The effective contact area of the airbag was calculated by dividing the load measured in load cells by the pressure inside the airbag. When the distance between the reaction walls and the masonry infill wall is smaller, the effective area is closer to the nominal area of the airbag. Deformation and crack patterns of the infill confirm the formation of arching mechanism and two-way bending of the masonry infill. Until collapse of the horizontal interface between infill and upper beam in RC frame, the infill bends in two directions but the failure of that interface which is known as weakest interface due to difficulties in filling the mortar between bricks of last row and upper beam results in the crack opening trough a well-defined path and the consequent collapse of the infill.

Social capital and government in the production of public goods

As a response to the rapidly growing empirical literature on social capital and the evidence of its correlation with government performance, we build a theoretical framework to study the interactions between social capital and government's action. This paper presents a model of homogeneous agents in an overlapping generations framework incorporating social capital as the values transmitted from parent to child. The government's role is to provide public goods. First, government expenditure is exogenously given. Then, it will be chosen at the preferred level of the representative agent. For both setups the equilibrium outcomes are characterized and the resulting dynamics studied. Briefly we include an analysis of the effect of productivity growth on the evolution of social capital. The results obtained caution caution against both the crowding out effect of the welfare state and the impact of sustained economic growth on social capital.

Estimating the Price of ROCs

The UK government introduced the Renewable Obligation (RO), a system of tradable quotas, to encourage the installation of renewable electricity capacity. Each unit of generation from renewables created a renewable obligation certificate (ROC). Electricity generators must either; earn ROCs through their own production, purchase ROCs in the market or pay the buy-out price to comply with the quota set by the RO. A unique aspect of this regulation is that all entities holding ROCs receive a share of the buy-out fund (the sum of all compliance purchases using the buy-out price). This set-up ensures that the difference between the market price for ROCs and the buy-out price should equal the expected share of the buy-out fund, as regulated entities arbitrage these two compliance options. The expected share of the buy-out fund depends on whether enough renewable generation is available to meet the quota. This analysis tests whether variables associated with renewable generation or electricity demand are correlated with, and thus can help predict, the price of ROCs.

Penalizing Cartels: The Case for Basing Penalties on Price Overcharge

In this paper we set out the welfare economics based case for imposing cartel penalties on the cartel overcharge rather than on the more conventional bases of revenue or profits (illegal gains). To do this we undertake a systematic comparison of a penalty based on the cartel overcharge with three other penalty regimes: fixed penalties; penalties based on revenue, and penalties based on profits. Our analysis is the first to compare these regimes in terms of their impact on both (i) the prices charged by those cartels that do form; and (ii) the number of stable cartels that form (deterrence). We show that the class of penalties based on profits is identical to the class of fixed penalties in all welfare-relevant respects. For the other three types of penalty we show that, for those cartels that do form, penalties based on the overcharge produce lower prices than those based on profit) while penalties based on revenue produce the highest prices. Further, in conjunction with the above result, our analysis of cartel stability (and thus deterrence), shows that penalties based on the overcharge out-perform those based on profits, which in turn out-perform those based on revenue in terms of their impact on each of the following welfare criteria: (a) average overcharge; (b) average consumer surplus; (c) average total welfare.

Poots launches £18m state-of-the-art Telemonitoring NI service

Health Minister Edwin Poots today marked the roll-out of a ground-breaking hi-tech scheme which will enable more patients to monitor their health in their own homes. Following funding of £18m from the Department of Health, the newly named Centre for Connected Health and Social Care (CCHSC), part of the Public Health Agency, worked in partnership with business consortium TF3to establish the innovative Telemonitoring NI service. The service is now being delivered by the TF3 consortium in partnership with the Health and Social Care Trusts.Remote telemonitoring combines technology and services that enable patients with chronic diseases to test their vital signs such as pulse, blood pressure, body weight, temperature, blood glucose and oxygen levels at home on a daily basis. The service will now be rolled out to 3,500 patients across Northern Ireland per annum for a period of six years.Mr Poots today visited the home of Larne pensioner Michael Howard who has Chronic Pulmonary Obstructive Disorder (COPD) to hear how Telemonitoring NI has changed his life.During the visit Mr Poots said: "Chronic diseases such as heart disease, diabetes and COPD affect around three quarters of people over the age of 75. This is the generation from whom transport and mobility pose the biggest problems. The Telemonitoring NI service will allow thousands to monitor their vital signs without having to leave their own homes."It means that patients are able to understand and manage their condition better. Many say it has improved their confidence and given them peace of mind. With a health professional monitoring each patient's health on a daily basis, there is less need for hospital admission. Carers are also better informed with the pro-active support provided. It means earlier intervention in, and the prevention of, deterioration of condition, acute illness and hospital admissions."Telemonitoring NI is an excellent example of how the Health Service can innovateusing modern technology to deliver a better service for our patients."Eddie Ritson, Programme Director of CCHSC, PHA, said: "The roll-out of Telemonitoring NI represents a significant step towards providing quality care for the growing number of people with heart disease, stroke, some respiratory conditions and diabetes who want to live at home while having their conditions safely managed."This new service will give people more information which combined with timely advice will enable patients to gain more control over their health while supporting them to live independently in their own homes for longer."A patient will take their vital sign measurements at home, usually on a daily basis. and these will automatically be transmited to the Tf3 system. The resulting readings are monitored centrally by a healthcare professional working in the Tf3 triage team. If the patient's readings show signs of deterioration to an unacceptable level, they will be contacted by phone by a nurse working in a central team and if appropriate a healthcare professional in the patient's local Trust will be alerted to enable them to take appropriate action."Families and carers will also benefit from the reassurance that chronic health conditions are being closely monitored on an ongoing basis. The information collected through the service can also be used by doctors, nurses and patients in making decisions on how individual cases should be managed. "Using the service, Mr Howard, 71, who has emphysema - a long-term, progressive disease of the lungs that primarily causes shortness of breath - monitors his vital signs using the new technology every weekday morning. The information is monitored centrally and if readings show signs of deterioration to an unacceptable level, Mr Howard's local healthcare professional is alerted."Taking my readings is such a simple process but one that gives me huge benefits as it is an early warning system to me and also for the specialist nurses in charge of my care. Without the remote telemonitoring I would be running back and forward to the GPs' surgery all the time to have things checked out," he explained."Having my signs monitored by a nurse means any changes in my condition are dealt with immediately and this has prevented me from being admitted to hospital - in the past I've had to spend six days in hospital any time I'm admitted with a chest infection."The telemonitoring is not only reassuring for me, it also gives me more control over managing my own condition and as a result I have less upheaval in my life, and I'm less of a cost to the health care system. Most importantly, it gives me peace of mind and one less thing to worry about at my age."Patients seeking further information about the new telemonitoring service should contact their healthcare professional.