Effects of trade policy on technology adoption and investment

This paper studies the consequences of trade policy for the adoption of new technologies. It develops a dynamic international trade model with two sectors. Workers in manufacturing decide if new technologies are used, capital owners then choose investment. We analyze three different arrangements: free trade, tariffs, and quotas. In the model economy, free trade as well as tariffs guarantee that the most productive technology available will be used. In contrasL under a quota the most productive technology available will not be used at all times. Further, in the latter case investment and the capital stock are smaller than in the former one. Finally, there exists parameter values for which the computed difference in GDP is a factor of thirty.

Technology adoption and effects of transfers across locations

This paper develops a two-period model with heterogeneous agents to analyze the e¤ects of transfers across locations on convergence, growth and welfare. The model has two important features. First, locations are asymmetric as it is assumed that there are more specialized occupations in the more developed one. Second, the returns on the investment to acquire new technology depend positively on the level of each region’s knowledge and on the level of the world knowledge assumed to be available to all. In one hand, the poor region has a disadvantage as it has a lower stock of knowledge. On the other hand, it has the advantage of not having yet exploited a greater stock of useable knowledge available in the world. Hence, there are two possible cases. When the returns are greater in the poor region, we obtain the following results: (i) the rich location grows slower; (ii) the transfers to the poor location enhances the country’s growth rate; and (iii) there is a positive amount of transfers to the poor region that is welfare improving. When the returns are greater in the rich region, the …rst two results are reversed and transfers to the rich region are welfare improving. In both cases, the optimal amount of transfer increases with the level of income disparity across regions and is not dependent on the level of the country’s economic development (measured by its income per capita). Barriers to the adoption of new technology available in the world can constrain the convergence process as it harms in greater length the poor region. The results do not change whether migration is allowed or not.

Brazilian Federal Universities : relative efficiency evaluation and data envelopment analysis

The papers aims at considering the issue of relative efficiency measurement in the context of the public sector. In particular, we consider the efficiency measurement approach provided by Data Envelopment Analysis (DEA). The application considered the main Brazilian federal universities for the year of 1994. Given the large number of inputs and outputs, this paper advances the idea of using factor analysis to explore common dimensions in the data set. Such procedure made possible a meaningful application of DEA, which finally provided a set of efficiency scores for the universities considered .

Rural technology adoption and its impacts: direct planting system in Sao Paulo

Este trabalho investiga a adoção do Sistema de Plantio Direto (SPD) no Brasil, uma tecnologia rural bastante promovida devido aos benefícios, tanto privados como sociais, que alegadamente traz. O trabalho baseia-se em evidências recentes sobre os determinantes da adoção desta tecnologia para investigar seus impactos utilizando-se de um grande painel de microdados de unidades de produção agrícola no estado de São Paulo, Brasil. Nós exploramos variações em localizações geográficas e características de solos para construir instrumentos para a adoção e assim identificar os impactos dessa adoção na produção agrícola, nas alo- cações de terras e em outros indicadores da organização produtiva das fazendas. Embora as evidências de ganhos de produtividade permaneçam inconclusivas, nós encontramos impactos significativos da adoção de SPD na alocação de terras e nas decisões de produção.

Environmental regulation, technology adoption and structural transformation: evidence from Brazilian sugarcane industry

We estimate the effects of the adoption of mechanized agriculture led by a new environmental regulation on structural change of local labor markets within a large emerging country, Brazil. In 2002, the state of S\~{a}o Paulo passed a law outlying the timeline to end sugarcane pre-harvest burning in the state. The environmental law led to the fast adoption of mechanized harvest. We investigate if the labor intensity of sugarcane production decreases; and, if so, if it leads to structural changes in the labor market. We use satellite data containing the type of sugarcane harvesting -- manual or mechanic harvest -- paired with official labor market data.%, also geomorphometric data base for our instrumental variable correction. We find suggestive evidence that mechanization of the field led to an increase in utilization of formal workers and a reduction in formal labor intensity in the sugarcane sector. This is partially compensated by an increase in the share of workers in other agricultural crops and in the construction and services sector. Although we find a reduction in employment in the manufacturing sector, the demand generated by the new agro-industries affected positively the all sectors via an increase in workers' wage.

The relationships of alternative energies with the technology sector and non-renewable energies

Este trabalho tem como objectivo compreender de que forma os investidores veem as energias renováveis: se as veem como parte do sector tecnológico, à espera de novos desenvolvimentos, ou como uma alternativa aos métodos existentes de produção de energia. Para responder a esta questão, foi desenvolvido um modelo de vectores autoregressivos com quatro variáveis de forma a se poder aplicar um Granger causality test e Impulse Response function. Os resultados sugerem que para o período de 2002-2007 à escala global ambas as hipóteses se confirmam, porém de 2009-2014 os resultados sugerem que os investidores não reconhecem as energias renováveis como um ramo do sector tecnológico, neste período. Para além disso, durante o período de 2009-2014, e quando comparados investidores Americanos com Europeus, os resultados sugerem que apenas o último identifica as energias renováveis como uma fonte viável para a produção energética.

Evaluation and development of passion fruit (Passiflora alata Dryander) propagated by cutting and seet in conditions of commercial orchard

The present work was conducted in a fruit tree propagation area of the Plant Production Department of the Faculdade de Ciencias Agrarias e Veterinarias, Universidade Estadual Paulista (FCAV/UNESP) in Jaboticabal, SP, and also in a commercial orchard in Araguari, MG, with the objective to verify the potential of vegetative growth (stem diameter, height of plants and leaf number) of plants of passion fruit (Passiflora alata Dryander), gotten by cutting and seed, comparing the initial development of plants in the field. This experiment was carried out from January 2002 to February 2003. The experiment using seeds was conducted at a shadow house, and the one that used cuttings in an intermitent mist. The cuttings and seeds were collected from adult plants which came from Passifloraceae Active Germoplasm Bank (BAG) of the Plant Production Department of FCAC/UNESP. For the cuttings, it was used the intermediate part of the branches in stadium of vegetative growth. The seeds, in order to obtain the seedlings, had been sown in plastic trays. Cuttings and seedlings were transplanted to plastic bags with substrate in shadow house and with daily irrigation. They were acclimatized and planted on field, after 60 days. on field, the stem diameter, plant height and number of leaves were better for cuttings than for seedlings in Jaboticabal, SP. In Araguari, MG, stem diameter was larger in the seedlings, which plant heights and number of leaves were larger on cuttings.

Mutagenic evaluation and chemical investigation of Byrsonima intermedia A. Juss. leaf extracts

Byrsonima intermedia is a native species of the cerrado formation (tropical American savannah). In Brazil, this plant has been used for the treatment of fever, in ulcers, as a diuretic, as antiasthinatics and in skin infections. Members of the genus Byrsonima (Malpighiaceae) are employed not only in the folk medicine but also as food to make juice, jellies and liquor. The aim of this work was to evaluate the mutagenic effects of Byrsonima intermedia, common name 'murici'. Phytochernical analysis of methanol extract furnished (+)catechin, (-)-epicatechin, quercetin-3-O-beta-D-galactopyranoside, methyl gallate, gallic acid, quercetin-3-O-alpha-L-arabinopyranoside, amentoflavone, quercetin, querceti n-3-O-(2-O-galloyl)-beta-galactopyranoside and quei-eetin-3-O-(2-O-galloyl)-alpha-arabinopyranoside. Methanol, hydromethanol and chloroform extracts were evaluated in inutagenic assay with Salmonella typhimurium (Ames test) and mice (Micronucleus test). The methanolic extract presented signs of mutagenic activity for the strains TA98 and TA100 in the Ames assay. Mutagenicity was not observed in vivo. (c) 2007 Elsevier B.V.. All rights reserved.

Pharmacological Evaluation and Preliminary Pharmacokinetics Studies of a New Diclofenac Prodrug without Gastric Ulceration Effect

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Oral cavity evaluation and dental chart registration of coati (Nasua nasua) in captivity

The aims of this study were to develop a dental chart evaluate any oral cavity disease, develop gypsum models the dental arches, and to register the occlusions found in coatis (Nasua nasua) in captivity. Formulation of the dental chart was assisted by intraoral radiographs from the head of an adult coati cadaver of the same species with the following dental formula: I 3/3, C 1/1, P 4/3, M 2/2. Seven live coatis of the Nasua nasua species were evaluated. Five of the seven coatis presented with various dental abnormalities as follows: dental plaque (71.4 %), gingivitis (71.4 %), periodontitis (57.1 %), dental stain (42.9 %), dental abrasion (57.1 %), dental fracture (57.1 %), pulp exposure (42.9 %), malocclusion (5 7.1 %) and supernumerary teeth (14.2 %).

Clinical evaluation and induced corneal vascularization study by native and anionic collagen membranes in rabbits corneas

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

PRP8 intein in Ajellomycetaceae family pathogens: Sequence analysis, splicing evaluation and homing endonuclease activity

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Kinetics of venom and antivenom serum levels, clinical evaluation and therapeutic effectiveness in dogs inoculated with Crotalus durissus terrificus venom

This work evaluated the clinical and therapeutic aspects as well as serum levels of venom and antivenom IgG by enzyme-linked immunosorbent assay (ELISA) in experimental envenomation of dogs with Crotalus durissus terrificus venom. Twenty-eight mixed breed adult dogs were divided into four groups of seven animals each, Group I: only venom; Group II, venom + 50 ml of anti-bothropic-crotalic serum (50mg) + fluid therapy; Group III, venom + 50 ml of anti-bothropic-crotalic serum + fluid therapy + urine alkalination; Group IV, 50 ml of anti-bothropic-crotalic serum. The lyophilized venom of Crotalus durissus terrificus was reconstituted in saline solution and subcutaneously inoculated at the dose of 1mg/kg body weight. The dogs presented clinical signs of local pain, weakness, mandibular ptosis, mydriasis, emesis and salivation. The venom levels detected by ELISA ranged from 0 to 90ng/ml, according to the severity of the clinical signs. Serum antivenom ranged from 0 to 3ug/ml and was detected for up to 138h after treatment. ELISA results showed the effectiveness of the serum therapy for the venom neutralization.

Evaluation and Application of TS-FF-AAS System Using Ceramic Tube as Atomization Cell for Tin Determination in Canned Foods

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Evaluation and application of bismuth as an internal standard for the determination of lead in wines by simultaneous electrothermal atomic absorption spectrometry

A method for the direct determination of Pb in wines by simultaneous multi-element atomic absorption spectrometry (SIMAAS) using a transversely heated graphite atomizer, Zeeman-effect background corrector and internal standardization is proposed. Bismuth was used as an internal standard and Pd(NO3)(2) plus Mg(NO3)(2) as chemical modifier,to stabilize both the analyte and the internal standard. The implementation of two pyrolysis steps avoided any build-up of carbonaceous residues on the graphite platform. All diluted samples (1 + 1 v/v) in 0.2% v/v HNO3 and reference solutions (5.0-50 mug l(-1) Ph in 0.2% v/v HNO3) were spiked with 25 mug l(-1) Bi. For a 20 mul aliquot dispensed into the graphite tube, a good correlation (r = 0.9997) was obtained between the ratio of the analyte signal to the internal standard signal and the analyte concentration of the reference solutions. The electrothermal behaviour of Pb and Bi in red, white and rose wines were compared. In addition, absorbance variations due to changes in experimental conditions, such as atomizer temperature, integration time, injected sample volume, radiation beam intensity, graphite tube surface, dilution and sample composition, were minimized by using Bi as internal standard. Relative standard deviations of measurements based on integrated absorbance varied from 0.1 to 3.4% and from 0.5 to 7.3% (n = 12) with and without internal standard correction, respectively. Good recoveries (91-104%) for Pb spikes were obtained. The characteristic mass was 45 pg Pb and the limit of detection based on integrated absorbance was 0.9 mug l(-1) Pb. Internal standardization increased the lifetime of the tube by 25%. Direct determinations of Pb in wines with and without internal standardization approaches were in agreement at the 95% confidence level. The repeatability and the tube lifetime were improved when using Bi as internal standard. The improvement in accuracy using an internal standard was only observed when the analytical results were affected by errors.