Technological Neutrality

"The paper speaks about the both positive and negative arguments of the concept of technological neutrality. Technology is the part and parcel of present people's daily life having aesthetic and devil impact on world. The experts and philosophers on interpretation of the influence of technology in life are concerned about the ongoing misuse of technology. The debate is whether technology itself becomes destructive and detrimental to us or the people inventing technology are responsible to make it more harmful for their own greediness. States are preparing to adopt new laws regarding the proper, exact and neutral use of technology in a sense to protect the deviation of technology behavior. The introduction tells about the fundamental impact and effectiveness of technology in life; ""definition of technology"" goes ahead to identify the various aspect of technology development stages; ""autonomous technology"" heading finds out the true characters of technology as against to human power and strength; ""neutral technology"" implies the adaptation of laws for neutral use of technology itself; ""neutrality principle in economy and communication science"" has the notion of impartial rationale of being unbiased for upholding technology neutrality principle in practice; and finally the conclusion ends with summing up the average influences of technology on human being at large."

Essays in International Trade

Dans ma thèse doctorale, j'étudie trois facteurs importants qui caractérisent le commerce international : les différences technologiques entre les pays, les barrières à l'entrée sous la forme de coûts fixes et la migration internationale. Le premier chapitre analyse si les différences technologiques entre les pays peuvent expliquer la spécialisation dans le commerce international entre les pays. Pour mesurer le niveau de la spécialisation, je calcule les index de concentration pour la valeur des importations et des exportations et décompose la concentration totale dans la marge de produits extensive (nombre de produits commercialisés) et la marge de produits intensive (volume de produits commercialisés). En utilisant des données commerciales détaillées au niveau du produit dans 160 pays, mes résultats montrent que les exportations sont plus concentrées que les importations, que la spécialisation se produit principalement au niveau de la marge intensive du produit, et que les économies plus grandes disposent d'importations et d'exportations plus diversifiées, car elles commercialisent plus de produits. Compte tenu de ces faits, j'évalue la capacité du modèle Eaton-Kortum, le principal modèle de la théorie ricardienne du commerce, pour représenter les preuves empiriques. Les résultats montrent que la spécialisation à travers l'avantage comparatif induit par les différences de technologie peut expliquer les faits qualitatifs et quantitatifs. De plus, j'évalue le rôle des déterminants clés de la spécialisation : le degré de l'avantage comparatif, l'élasticité de la substitution et la géographie. Une implication de ces résultats est qu'il est important d’évaluer jusqu'à quel point la volatilité de production mesurée par la volatilité du PIB est motivée par la spécialisation des exportations et des importations. Étant donné le compromis entre l'ouverture du commerce et la volatilité de production, les bénéfices tirés du commerce peuvent s'avérer plus faibles que ceux estimés précédemment. Par conséquent, les politiques commerciales alternatives telles que l'ouverture graduelle au commerce combinée à la diversification de la production pour réduire la concentration de l'exportation peuvent se révéler être une meilleure stratégie que l'approche du laissez-faire. En utilisant la relation entre la taille du marché et l’entrée de firmes et produits, le deuxième chapitre évalue si les barrières à l'entrée sous la forme de coûts fixes à exporter sont au niveau de la firme ou au niveau du produit. Si les coûts fixes se trouvent au niveau de la firme, la firme multiproduits a un avantage de coût de production par rapport aux autres firmes parce qu’elles peuvent diviser les coûts fixes sur plusieurs produits. Dans ce cas, le commerce international sera caractérisé par peu de firmes qui exportent beaucoup des produits. Si les coûts fixes sont au niveau du produit, l’entrée d’un produit est associée avec l’entrée de plusieurs firmes. La raison est qu’une fois que la première firme entre et paye les coûts fixes du produit, elle crée un effet d’entrainement qui réduit les coûts fixes pour des firmes rivales. Dans ce cas, le commerce international sera caractérisé par plusieurs firmes qui vendent des variétés différentes du même produit. En utilisant des données détaillées provenant de 40 pays exportateurs à travers 180 marchés de destination, mes résultats montrent que les barrières à l'entrée se trouvent principalement au niveau du produit. Un marché plus large favorise l'expansion d'un plus grand nombre d’entreprises au sein d'une catégorie de produit plutôt que de permettre aux entreprises produisant plusieurs produits de croître dans une gamme de produits. En regardant la différence entre le nombre d'exportateurs au sein d'une catégorie de produit dans des destinations données, je trouve que le taux d'entrée de firmes augmente significativement après qu'un produit entre la première fois dans le marché. J'en déduis donc que le premier entrant réduit les coûts fixes pour les firmes suivantes. Mes recherches démontrent également que malgré une plus grande compétition sur le marché du produit, les entreprises disposent de revenus d'exportation supérieurs et sont plus susceptibles de rester sur les marchés internationaux. Ces résultats sont cohérents avec l’hypothèse que l’effet d’entrainement incite l'entrée de firmes rivales et permettent aux entreprises de produire à plus grande échelle. Cette recherche dévoile un nombre de conclusions importantes. D'abord, les politiques commerciales encouragent l'entrée de nouveaux produits, par exemple, en promouvant des produits dans les marchés de destination entraînant ainsi des retombées qui se traduiront par un taux de participation plus élevé de l'entreprise et une croissance de l'exportation. Deuxièmement, les consommateurs du pays importateur peuvent bénéficier de prix plus bas pour le produit en réduisant les barrières techniques du commerce. Troisièmement, lorsque l'on effectue des expérimentations politiques sous la forme de réduction des coûts commerciaux, il est de coutume de considérer uniquement une baisse des coûts marginaux et d'évaluer les répercussions sur le bien-être du consommateur. Cependant, un élément important des accords commerciaux est la réduction des barrières techniques au commerce grâce à la négociation de normes communes pour un produit. Négliger l'existence des barrières à l'entrée et les conséquences des réaffectations de l'industrie affaiblit l'impact des réformes commerciales. Le troisième chapitre prend en compte le rôle de l'information dans la facilitation du commerce international. Les immigrants réduisent les coûts de transaction dans le commerce international en fournissant des informations sur les possibilités d'échange avec leur pays d'origine. En utilisant des données géographiques détaillées sur l'immigration et les importations aux États-Unis entre 1970 et 2005, je quantifie l'incidence qu'ont les nouveaux immigrants sur la demande pour les importations de biens intermédiaires aux États-Unis. Pour établir le lien cause à effet entre le commerce et la migration, j’exploite l'important afflux d'immigrants d'Amérique centrale après l'ouragan Mitch. Les résultats montrent que l'augmentation de dix pour cent d'immigrants a fait croître la demande pour les importations de biens intermédiaires de 1,5 pour cent. Mes résultats sont robustes aux problèmes de la causalité inverse ou la décision d’émigrer est causée par des opportunités de faire du commerce.

Technological Change and Modernisation in the Fishing Sector: The Question of Sustainability

Department of Applied Economics, Cochin University of Science And Technology.

Studies all transport and magnetic properties of nano particle doped MgB2 superconductor for technological applications

This thesis Entitled Studies on transport and magnetic properties of nano particle doped mgb2 superconductor for technological applications.The thesis ahead focuses on the establishment of enhanced superconducting properties in bulk MgB2 via nano particle doping and its conversion into mono/multifilamentary wires. Further, an attempt has also been made to develop prototypes of MgB2 coil and conduction cooled current lead for technological applications. The thesis is configured into 6 chapters. The opening chapter gives an idea on the phenomenon of superconductivity, the various types of superconductors and its applications in different fields. The second chapter is an introduction on MgB2 superconductor and its relevance which includes crystal and electronic structure, superconducting mechanism, basic superconducting properties along with its present international status. The third chapter provides details on the preparation and characterization techniques followed through out the study on MgB2. Fourth chapter discusses the effect of processing temperature and chemical doping using nano sized dopants on the superconducting properties of MgB2• Fifth chapter deals with the optimization of processing parameters and novel preparation techniques for wire fabrication. Sixth chapter furnishes the preparation of multifilamentary wires with various filament configurations, their electromechanical properties and it also incorporates the development of an MgB2 coil and a general purpose conduction cooled current lead.

Studies on the technological aspects and economic efficiency of trawl gear operating along the Cochin coast

Trawling, despite being heavily energy expensive, still continues to be the most energy expensive fishing method particularly so in View of the export oriented nature of the Indian seafood industry. This study therefore aims at analyzing the efficiency of trawls operation from Cochin, an important fishing center along the southwest coast of India. The analysis is made along two perspectives - economic and technological. Even though technological efficiency complement economic efficiency, in the fishing parlance, parameters like the size composition of the catch, selectivity factors, etc., will have a direct bearing on the technological qualities of the trawl, and which parameters will have a significant impact on the effective exploitation of a fishery stock. Whereas the technological analysis aims at improving the efficiency with regard to the effective utilization of fuel and fishery stocks, economic analysis ascertains the present status of the trawling operations from the commercial angle.

Inter- State Variations in Productivity trends and Technological Change in Indian industry

The present study entitled ‘Inter-State Variations in Manufacturing Productivity and Technological Changes in India’ covers a period of 38 years from l960 tol998-99. The study is mainly based on ASI data. The study starts with a discussion of the major facilitating factors of industrialization, namely, historical forces, public policy and infrastructure facilities. These are discussed in greater details in the context of our discussion on Perrox’s (1998) ‘growth pole’ and ‘development pole’, Hirschman’s (1958) ‘industrial centers’ and Myrdal’s ‘spread effect’ Most of the existing literature more or less agrees that the process of industrialization has not been unifonn in all Indian states. There has been a decline in inter-state industrial disparities over time. This aspect is dealt at some length in the third chapter. An important element that deserves detailed attention is the intra-regional differences in industrialisation. Regional industrialisation implies the emergence of a few focal points and industrial regions. Calcutta, Bombay and Madras were the initial focal points. Later other centers like Bangalore, Amritsar, Ahemedabad etc. emerged as nodal points in other states. All major states account for focal points. The analysis made in the third chapter shows that industrial activities generally converge to one or two focal points and industrial regions have emerged out of the focal points in almost all states. One of the general features of these complexes and regions is that they approximately accommodate 50 to 75 percent of the total industrial units and workers in the state. Such convergence is seen hands in glow with urbanization. It was further seen that intra-regional industrial disparity comes down in industrial states like Maharashtra, Gujarat and Uttar Pradesh.

Technological Changes and its Impact on Rubber Plantation Industry in Kerala An Econometric Study

The present study describes in detail the major technological advances in the rubber-growing industry in the lastfour decades. The major technological changes experienced in the rubber plantation industry during the period are the introduction of 'high yielding-planting materials, scientific application of fertilisers, use of pesticides, tapping during rainy season using‘rain guards, use of. yield stimulants and improved tapping methods School of Management Studies, Cochin University of Science and Technology

Technological Change and the Development of the Primary Fishing Industry of Kerala - A Study of Limited Growth

Induction of growth in the primary marine fishing industry of Kerala is a sine gua Qgn for improving the economy of the fishermen, the state's domestic product as well as earning more foreign exchange for the country. The State Administration has been trying to instil growth into the industry eversince the output of the industry showed marked sign of decline (particularly after 1975). Significantly, it has attempted to strengthen the traditional sector, (which is considered to be the crucial sector of the primary marine fishing industry of the state) by introducing intermediate technology and by revamping the organisational structure of the industry. But it appears that the production system in the primary marine fishing industry of Kerala has been severely constrained by the existing technology, organisation of production and marketing institutions. Regeneration of growth in the industry calls forth an understanding of the 'process' of growth in the industry and the need to réorganise it with new technology, and new organisations. The present study is an attempt to unraval the process of growth in the primary marine fishing industry of Kerala since 1951

Low-Cost Micromechanically Tunable Optical Devices: Strained Resonator Engineering, Technological Implementation and Characterization

The rapid growth of the optical communication branches and the enormous demand for more bandwidth require novel networks such as dense wavelength division multiplexing (DWDM). These networks enable higher bitrate transmission using the existing optical fibers. Micromechanically tunable optical microcavity devices like VCSELs, Fabry-Pérot filters and photodetectors are core components of these novel DWDM systems. Several air-gap based tunable devices were successfully implemented in the last years. Even though these concepts are very promising, two main disadvantages are still remaining. On the one hand, the high fabrication and integration cost and on the other hand the undesired adverse buckling of the suspended membranes. This thesis addresses these two problems and consists of two main parts: • PECVD dielectric material investigation and stress control resulting in membranes shape engineering. • Implementation and characterization of novel tunable optical devices with tailored shapes of the suspended membranes. For this purposes, low-cost PECVD technology is investigated and developed in detail. The macro- and microstress of silicon nitride and silicon dioxide are controlled over a wide range. Furthermore, the effect of stress on the optical and mechanical properties of the suspended membranes and on the microcavities is evaluated. Various membrane shapes (concave, convex and planar) with several radii of curvature are fabricated. Using this resonator shape engineering, microcavity devices such as non tunable and tunable Fabry-Pérot filters, VCSELs and PIN photodetectors are succesfully implemented. The fabricated Fabry-Pérot filters cover a spectral range of over 200nm and show resonance linewidths down to 1.5nm. By varying the stress distribution across the vertical direction within a DBR, the shape and the radius of curvature of the top membrane are explicitely tailored. By adjusting the incoming light beam waist to the curvature, the fundamental resonant mode is supported and the higher order ones are suppressed. For instance, a tunable VCSEL with 26 nm tuning range, 400µW maximal output power, 47nm free spectral range and over 57dB side mode suppresion ratio (SMSR) is demonstrated. Other technologies, such as introducing light emitting organic materials in microcavities are also investigated.

Optimization in the Technological Steps for the Fabrication of Large Area Micromirror Arrays

Micromirror arrays are a very strong candidate for future energy saving applications. Within this work, the fabrication process for these micromirror arrays has been optimized and some steps for the large area fabrication of micromirror modules were performed. At first the surface roughness of the insulation layer of silicon dioxide (SiO2) was investigated. This SiO2 thin layer was deposited on three different type of substrates i.e. silicon, glass and Polyethylene Naphthalate (PEN) substrates. The deposition techniques which has been used are Plasma Enhanced Chemical Vapor Deposition (PECVD), Physical Vapor Deposition (PVD) and Ion Beam Sputter Deposition (IBSD). The thickness of the SiO2 thin layer was kept constant at 150nm for each deposition process. The surface roughness was measured by Stylus Profilometry and Atomic Force Microscopy (AFM). It was found that the layer which was deposited by IBSD has got the minimum surface roughness value and the layer which was deposited by PECVD process has the highest surface roughness value. During the same investigation, the substrate temperature of PECVD was varied from 80° C to 300° C with the step size of 40° C and it was found that the surface roughness keeps on increasing as the substrate holder temperature increases in the PECVD process. A new insulation layer system was proposed to minimize the dielectric breakdown effect in insulation layer for micromirror arrays. The conventional bilayer system was replaced by five layer system but the total thickness of insulation layer remains the same. It was found that during the actuation of micromirror arrays structure, the dielectric breakdown effect was reduced considerably as compared to the bilayer system. In the second step the fabrication process of the micromirror arrays was successfully adapted and transferred from glass substrates to the flexible PEN substrates by optimizing the conventional process recipe. In the last section, a large module of micromirror arrays was fabricated by electrically interconnecting four 10cm×10cm micromirror modules on a glass pane having dimensions of 21cm×21cm.

Technological convergence: a strategic perspective

The information and communication technologies (ICT) sectors are in a process of technological convergence. Determinant factors in this process are the liberalisation of the telecommunications markets and technological change. Many firms are engaged in a process of mergers and alliances to position themselves in this new framework. Technological and demand uncertainties are very important. Our objective in this paper is to study the economic determinants of the strategies of the firms. With this aim, we review some key technological and demand aspects. We shed some light on the strategic motivations of the firms by establishing a parallel with the evolution of the retailing sector

Spillovers de volatilidad entre tasa de interés y tasa de cambio en Colombia, 2003-2009

Este trabajo se concentra en el estudio de los mecanismos de transmisión de información entre las volatilidades del diferencial de tasas de interés de Colombia y Estados Unidos tanto en el corto como en el largo plazo y la tasa de cambio usando tres diferentes tipos de modelos GARCH multivariados, encontrando que hay evidencia de spillovers de volatilidad de los diferenciales de tasas de interés hacia la tasa de cambio, que esta transmisión de información persiste en el tiempo y que los choques exógenos a estos mercados no tienen carácter asimétrico.