Technical requirements for the use of C&DW recycled aggregates in municipal and rural roads and trenches

The use of construction and demolition waste (C&DW) in the construction industry is an important contribution to attain sustainability in the sector. The roads are among the civil engineering works which can use larger quantities of C&DW recycled aggregates. In Portugal, the limit values for the properties of C&DW recycled aggregates that can be used in the roads of Portuguese Road Network are defined by two Laboratório Nacional de Engenharia Civil (LNEC) technical specifications (TS), in accordance to Portuguese Decree-law no. 46/2008 of May 12th. Municipal and rural roads and trenches have specific characteristics that can enable the use of C&DW of lower quality than those required by existing LNEC TS, and even then ensuring an adequate performance. However, given the absence of specific regulation for those applications, the Portuguese Environment Agency requires compliance with the existing LNEC TS, which represents an obstacle to recycling a significant part of the C&DW, in particular at a local government level. This paper presents guidelines for the recycling of C&DW in municipal and rural roads and in trenches, which could be considered in a new forthcoming LNEC TS. In the preparation of the guidelines, the bibliography collected and analysed, the information gathered from the application of C&DW in a municipal and rural roads of a Portuguese municipality and in the roadways of a Portuguese resort, and the results of laboratory tests carried out on samples collected in the Portuguese municipality were taken into consideration.

Análise estrutural e dimensionamento de estruturas de membrana

Dissertação de mestrado integrado em Engenharia Civil

Los objetos técnicos y los organismos tecnificados. Reflexiones filosóficas, estéticas y políticas sobre la técnica. Technical objects and technified organisms. Philosophical, aesthetical and political approaches on technique

El presente proyecto se propone como parte inicial de una investigación sobre la relación entre naturaleza/cultura/técnica. Tradicionalmente la naturaleza y la cultura se han considerado como ámbitos diferenciados y opuestos. Y es en esta distinción donde la técnica adquiere un lugar central. El pensamiento occidental sobre la técnica ha recibido diversas interpretaciones: desde una subordinación con respecto al conocimiento verdadero (episteme) en la filosofía clásica, un optimismo sobre la técnica como posibilidad de dominación de la naturaleza en el Renacimiento y la Ilustración, y la ambigüedad y desasosiego romántico (Mitcham, 1979). Durante el siglo XX se distinguen dos posiciones antagónicas sobre la técnica. Por un lado, una actitud “crítica” donde pueden identificarse los trabajos de filósofs de diferentes tradiciones como Ortega y Gasset (1939), Heidegger (1954), Mumford (1971) Ellul (1960) y la Escuela de Frankfurt. Por otro lado, una filosofía de la técnica “ingenieril” que consiste en el análisis de la tecnología como un paradigma de pensamiento y acción humana. Esta dicotomía ha sido interpretada por Eco como “apocalípticos e integrados”. Más allá de las mencionadas diferencias, lo que tienen en común ambas posiciones es que parten de una dicotomía entre cultura y naturaleza. Nuestra perspectiva rechaza esta dicotomía, por el contrario, evidenciamos una creciente imbricación entre ambas donde las fronteras entre una y otra se hacen difusas. La noción de “objeto técnico” propuesta por Simondon (2007) hace referencia a la inserción del objeto técnico en la cultura, donde debe reconocerse la “realidad humana” presente en el mismo. Ahora bien, esto no significa “humanizar el objeto técnico”, sino más bien indagar sobre el lugar que este ocupa en la cultura como también establecer su relación con la naturaleza. En el siglo XVII el hombre mismo es reinterpretado como máquina (La Mettrie, 2000). En la actualidad pueden identificarse dos tendencias en la concepción de la técnica: los «humanos-máquinas» y las «máquinas-humanas», en otras palabras, la disposición del humano hacia la máquina y la tendencia de la máquina hacia lo humano. No obstante, ambas posiciones siguen manteniendo una distinción taxonómica entre el cuerpo –o lo orgánico- y lo maquínico, lo que implica una consideración de esta relación de manera extrínseca. Frente a esta tensión Haraway propone el concepto de cyborg: «un organismo cibernético» (1995). Los desarrollos tecnológicos han producido una modificación tal en la vida de los seres orgánicos en los cuales ya no puede concebirse su cuerpo independientemente de la tecnología. Esto conduce a replantear la distinción entre “animales/hombres/máquinas”, entendiendo a los mismos como expresiones de naturaleza, cultura y tecnología respectivamente. Nuestra investigación parte de la hipótesis que la técnica diluye diferencias de orden natural y cultural a través de los objetos técnicos que son productos culturales. La estética se ocupa de la percepción sensible del mundo no puede eludir su dimensión técnica. Al margen de la crítica a la “Industria cultural” consideramos relevante la aproximación de Benjamin al problema de la técnica porque aborda la imbricación antes mencionada en el campo de la percepción. Según Benjamin la irrupción de la técnica al mismo tiempo que posibilita una estetización de la política que confluye en el fascismo como punto extremo también abre la posibilidad de desmontar la ideología del progreso infinito (1967). Una integración entre aproximaciones estéticas y políticas a la técnica Flusser (1983) propone la “caja negra” como metáfora de la técnica contemporánea. Su propuesta es la “apertura de la caja negra” que consiste en tomar conocimiento del funcionamiento del dispositivo. Nuestra propuesta de investigación aborda la técnica desde una consideración filosófica/estética/política, donde redefiniremos la técnica partiendo de la imbricación entre cultura y naturaleza. This project will set the basis for a sustained research on the relation nature/culture/technique. They have been traditionally considered as separate and even opposite fields. And it is on the brink of this distinction where technique plays a central role. In Western thought technique has received many interpretations since the beginnings of philosophy: from a subordination to true knowledge (episteme) in classic philosophy, or the optimism which sees in technique the possibility of dominating nature in the Renaissance and in the Enlightenment, to the Romantic ambiguity and uneasiness towards technological change (Mitcham, 1979). During the twentieth century two opposed approach on technique prevail. On one hand, a “critical” attitude such defines the work of philosophers of different traditions such as Ortega y Gasset (1939), Heidegger (1954), Mumford (1971) Ellul (1960) and the Frankfurt School. On the other hand there is an “engineering” philosophy of technique that consists in the analisis of technology as a paradigm to understand human action and thought. Besides their differences, both positions have in common a dichotomy between nature and culture. We reject such dichotomy. On the contrary we consider there is a growing intertwinement between both which blurs the borders of the concepts. Simondon’s notion of “technical object” refers to the insertion of the technique in culture where the “human reality” in it must be recognised. This does not imply “humanising the technical object”, but investigate on the role it plays on culture and establishing its relation to nature. To articulate this relation we will work with unorthodox approaches on technique such as Benjamin (1967), Flusser (1983) and others. The hypothesis of our project is that the traditional distinction of “animal/man/machine” must be re-thought, therefore raising the question on the blurring line between nature, culture and technique and its effects in philosophy, politics and aesthetics.

Development and implementation of an integrated technical management system

Quality Management, Integrated Technical Management Systems, ITMS, Technical Elements, Environment, Occupational Health and safety, OH&S, Standards, ISO, General Regulations, Integration, Management Functions, Computer Centre, Suc-cess Concepts, Documentation, PCT, QMS, EMS, OH&S-MS, Portioning, Evaluation, Technical Cycle, Technical Compliance, Framework

International trade, technical change and the demand for skills : how important is trade in quality differential products?

Magdeburg, Univ., Fak. für Wirtschaftswiss., Diss., 2012

Storing Data in the Trial of Complex Technical Products

The article considers the ways of organization of databases for the storage of the results obtained during testing. A new variant of the organization of the data to ensure the ability to write to the database different sets of parameters in the form of chronological series. The required set of parameters depends on the modification of the tested technical installation.

The beginnings of porcelain in China, by Berthold Laufer... with a technical report by H.W. Nichols... Twelve plates and two text-figures...

v.15:no.2(1917)

The Natural history of Enewetak Atoll / edited by Dennis M. Devaney ... [et al.] ; prepared by Office of Scientific and Technical Information, U.S. Department of Energy.

1

Land, technical progress and the falling rate of profit

The paper sets out a one sector growth model with a neoclassical production function in land and a capital-labour aggregate. Capital accumulates through capitalist saving, the labour supply is infinitely elastic at a subsistence wage and all factors may experience factor augmenting technical progress. The main result is that, if the elasticity of substitution between land and the capital-labour aggregate is less than one and if the rate of caital augmenting technical progress is strictly positive, then the rate of profit will fall to zero. The surprise is that this result holds regardless of the rate of land augmenting technical progress; that is, no amount of technical advance in agriculture can stop the fall in the rate of profit. The paper also discusses the relation of this result to the classical and Marxist literature and sets out the path of the relative price of land.

Technical innovations at the service of cheaper labour in pre-industrial Europe. The Enlightened agenda to transform the gender division of labour in silk manufacturing

In 1749, Jacques de Vaucanson patented his or tour pour tirer la soie or spindle for silk reeling. In that same year he presented his invention to the Academy of the Sciences in Paris, of which he was a member1. Jacques de Vaucanson was born in Grenoble, France, in 1709, and died in Paris in 1782. In 1741 he had been appointed inspector of silk manufactures by Louis XV. He set about reorganizing the silk industry in France, in considerable difficulty at the time due to foreign competition. Given Vaucanson’s position, his invention was intended to replace the traditional Piémontes method, and had an immediate impact upon the silk industry in France and all over Europe.