Adjuvant Arteriovenous Fistula for Infrapopliteal Bypass Patency

A lack of suitable venous graft material or poor outflow is an increasingly encountered situation in peripheral vascular surgery. Prosthetic grafts have clearly worse patency than vein grafts in femorodistal bypass surgery. The use of an adjuvant arteriovenous fistula (av-fistula) at the distal anastomosis has been postulated to improve the flow and thus increase prosthetic graft patency. In theory the adjuvant fistula might have the same effect in a compromised outflow venous bypass. A free flap transfer also augments graft flow and may have a positive effect on an ischaemic limb. The aim of this study was to evaluate the possible benefit of an adjuvant av-fistula and an internal av-fistula within a free flap transfer on the patency and outcome of an infrapopliteal bypass. The effect of the av-fistula on bypass haemodynamics was also assessed along with possible adverse effects. Patients and methods: 1. A prospective randomised multicentre trial comprised 59 patients with critical leg ischaemia and no suitable veins for grafting. Femorocrural polytetrafluoroethylene (PTFE) bypasses with a distal vein cuff, with or without an adjuvant av-fistula, were performed. The outcome was assessed according to graft patency and leg salvage. 2. Haemodynamic measurements were performed to a total of 50 patients from Study I with a prolonged follow-up. 3. Nine critically ischaemic limbs were treated with a modified radial forearm flap transfer in combination with a femorodistal bypass operation. An internal av-fistula was created within the free flap transfer to increase flap artery and bypass graft flow. 4. The effect of a previous free flap transfer on bypass haemodynamics was studied in a case report. 5. In a retrospective multicentre case-control study, 77 infrapopliteal vein bypasses with an adjuvant av-fistula were compared with matched controls without a fistula. The outcome and haemodynamics of the bypasses were recorded. Main results: 1. The groups with and without the av-fistula did not differ as regards prosthetic graft patency or leg salvage. 2. The intra- and postoperative prosthetic graft flow was significantly increased in the patients with the av-fistula. However, this increase did not improve patency. There was no difference in patency between the groups, even in the extended follow-up. 3. The vein graft flow increased significantly after the anastomosis of the radial forearm flap with an internal av-fistula. 4. A previously performed free flap transfer significantly augmented the flow of a poor outflow femoropedal bypass graft. 5. The adjuvant av-fistula increased the venous infrapopliteal bypass flow significantly. The increased flow did not, however, lead to improved graft patency or leg salvage. Conclusion: An adjuvant av-fistula does not improve the patency of a femorocrural PTFE bypass with a distal vein cuff despite the fact that the flow values increased both in the intraoperative measurements and during the immediate postoperative surveillance. The adjuvant av-fistula increased graft flow significantly also in a poor outflow venous bypass, but regardless of this the outcome was no improved. The adjuvant av-fistula rarely caused adverse effects. In a group of diabetic patients, the flow in a vascular bypass graft was augmented by an internal av-fistula within a radial forearm flap and similarly in a patient with a previous free flap transfer, a high intraoperative graft flow was achieved due to the free flap shunt effect.

Childhood otitis media - risk factors and surgical management

Background: Otitis media (OM) is one of the most common childhood diseases. Approximately every third child suffers from recurrent acute otitis media (RAOM), and 5% of all children have persistent middle ear effusion for months during their childhood. Despite numerous studies on the prevention and treatment of OM during the past decades, its management remains challenging and controversial. In this study, the effect of adenoidectomy on the risk for OM, the potential risk factors influencing the development of OM and the frequency of asthma among otitis-prone children were investigated. Subjects and methods: One prospective randomized trial and two retrospective studies were conducted. In the prospective trial, 217 children with RAOM or chronic otitis media with effusion (COME) were randomized to have tympanostomy with or without adenoidectomy. The age of the children at recruitment was between 1 and 4 years. RAOM was defined as having at least 3 episodes of AOM during the last 6 months or at least 5 episodes of AOM during the last 12 months. COME was defined as having persistent middle ear effusion for 2-3 months. The children were followed up for one year. In the first retrospective study, the frequency of childhood infections and allergy was evaluated by a questionnaire among 819 individuals. In the second retrospective study, data of asthma diagnosis were analysed from hospital discharge records of 1616 children who underwent adenoidectomy or had probing of the nasolacrimal duct. Results: In the prospective randomized study, adenoidectomy had no beneficial effect on the prevention of subsequent episodes of AOM. Parental smoking was found to be a significant risk factor for OM even after the insertion of tympanostomy tubes. The frequencies of exposure to tobacco smoke and day-care attendance at the time of randomization were similar among children with RAOM and COME. However, the frequencies of allergy to animal dust and pollen and parental asthma were lower among children with COME than those with RAOM. The questionnaire survey and the hospital discharge data revealed that children who had frequent episodes of OM had an increased risk for asthma. Conclusions: The first surgical intervention to treat an otitis-prone child younger than 4 years should not include adenoidectomy. Interventions to stop parental smoking could significantly reduce the risk for childhood RAOM. Whether an otitis-prone child develops COME or RAOM, seems to be influenced by genetic predisposition more strongly than by environmental risk factors. Children who suffer from repeated upper respiratory tract infections, like OM, may be at increased risk for developing asthma.

Flap‐Lag Damping in Hover and Forward Flight with a Three‐Dimensional Wake

Prediction of lag damping is difficult owing to the delicate balance of drag, induced drag and Coriolis forces in the in‐plane direction. Moreover, induced drag” is sensitive to dynamic wake, bath shed and trailing components, and thus its prediction requires adequate unsteady‐wake representation. Accordingly, rigid‐blade flap‐lag equations are coupled with a three‐dimensional finite‐state wake model; three isolatcd rotor canfigurations with three, four and five blades are treated over a range of thrust levels, tack numbers, lag frequencies and advance ratios. The investigation includes convergence characteristics of damping with respect to the number of radial shape functions and harmonics of the wake model for multiblade modes of low frequency (< 1/ rev.) to high frequency (> 1/rev.). Predicted flap and lag damping levels are then compared with similar predictions with 1) rigid wake (no unsteady induced now), 2) Loewy lift deficiency and 3) dynamic inflow. The coverage also includes correlations with the measured lag regressive‐mode damping in hover and forward flight and comparisons with similar correlations with dynamic inflow. Lag‐damping predictions with the dynamic wake model are consistently higher than the predictions with the dynamic inflow model; even for the low frequency lag regressive mode, the number of wake harmonics should at least be equal to twice the number of blades.

Flap-lag-torsion stability in hover and forward flight with three-dimensional wake

The contributions of full-wake dynamics in trim analysis are demonstrated for finding the control inputs and periodic responses simultaneously, as well as in Floquet eigenanalysis for finding the damping levels. The equations of flap bending, lag bending, and torsion are coupled with a three-dimensional, finite state wake, and low-frequency (<1/rev) to high frequency (>1/rev) multiblade modes are considered. Full blade-wake dynamics is used in trim analysis and Floquet eigenanalysis. A uniform cantilever blade in trimmed flight is investigated over a range of thrust levels, advance ratios, number of blades, and blade torsional frequencies. The investigation includes the convergence characteristics of control inputs, periodic responses, and damping levels with respect to the number of spatial azimuthal harmonics and radial shape functions in the wake representation. It also includes correlation with the measured lag damping of a three-bladed untrimmed rotor. The parametric study shows the dominant influence of wake dynamics on control inputs, periodic responses, and damping levels, and wake theory generally improves the correlation.

A feasibility study of a post-buckled beam for actuating helicopter trailing edge flap

Active trailing edge flaps (TEFs) are one of the most promising devices for helicopter vibration reduction. Smart actuators such as the piezoelectric stack actuators (PEAs) are used for TEF actuation. PEAs possess high energy density and have large force in dynamic condition but are limited to small displacements. In this investigation, we study a linear to rotary motion amplification mechanism (AM-2) based on a pinned-pinned post-buckled beam to actuate trailing edge flaps. A linear motion amplification mechanism is developed and coupled with AM-2 to amplify angular flap deflections. Experiments are conducted on bench top-test setup, and maximum flap angle deflections of the order of 12A degrees are achieved in the static case. An aeroelastic analysis is performed and 91 % reduction in helicopter vibration is obtained with multiharmonic control inputs.

Incorporação e remodelação de enxertos homólogos na reconstrução alveolar em humanos: análise tomográfica, histológica e histomorfométrica

Enxertos ósseos homólogos congelados têm sido documentados apresentando bons resultados clínicos como substituto ao material autógeno nas reconstruções alveolares. Entretanto, dados referentes à incorporação e remodelação destes enxertos não estão disponíveis na literatura. Este estudo tem por objetivo determinar um período ótimo de espera para instalação de implantes em rebordos reconstruídos com enxertos ósseos homólogos em bloco no que se refere à incorporação e reabsorção. 24 pacientes foram submetidos à reconstrução alveolar óssea homóloga previamente à instalação de implantes. Os indivíduos foram alocados randomicamente em um de 3 grupos de acordo com o tempo de espera para o segundo estágio cirúrgico (4, 6 e 8 meses). Análises tomográficas, histológicas e histomorfométricas foram utilizadas a fim de determinar o grau de reabsorção e incorporação dos enxertos nos diferentes intervalos de tempo para cada grupo. Os dados de reabsorção sofrida pelos enxertos demonstraram diferenças estatisticamente significativas para os três intervalos de espera. Da mesma forma, parâmetros histomorfométricos como contagem de osteócitos e quantificação de remanescentes de osso homólogo nas biópsias apresentaram diferenças significativas entre os grupos. De acordo com os dados do presente trabalho, no que diz respeito à remodelação e incorporação, o período mais favorável à instalação dos implantes a curto prazo após recontruções com enxertos homólogos é de 4 meses.

Integrated high pressure microhydraulic actuation and control for surgical instruments

To reduce the surgical trauma to the patient, minimally invasive surgery is gaining considerable importance since the eighties. More recently, robot assisted minimally invasive surgery was introduced to enhance the surgeon's performance in these procedures. This resulted in an intensive research on the design, fabrication and control of surgical robots over the last decades. A new development in the field of surgical tool manipulators is presented in this article: a flexible manipulator with distributed degrees of freedom powered by microhydraulic actuators. The tool consists of successive flexible segments, each with two bending degrees of freedom. To actuate these compliant segments, dedicated fluidic actuators are incorporated, together with compact hydraulic valves which control the actuator motion. Especially the development of microvalves for this application was challenging, and are the main focus of this paper. The valves distribute the hydraulic power from one common high pressure supply to a series of artificial muscle actuators. Tests show that the angular stroke of the each segment of this medical instrument is 90°. © 2012 Springer Science+Business Media, LLC.

Active control of normal shock wave/turbulent boundary layer interaction using "Smart" piezoelectric flap actuators

This paper looks at active control of the normal shock wave/turbulent boundary layer interaction (SBLI) using smart flap actuators. The actuators are manufactured by bonding piezoelectric material to an inert substrate to control the bleed/suction rate through a plenum chamber. The cavity provides communication of signals across the shock, allowing rapid thickening of the boundary layer approaching the shock, which splits into a series of weaker shocks forming a lambda shock foot, reducing wave drag. Active control allows optimum control of the interaction, as it would be capable of positioning the control region around the original shock position and control the rate of mass transfer. © 2004 by the American Institute of Aeronautics and Astronautics, Inc. All rights reserved.