Spatial network surrogates for disentangling complex system structure from spatial embedding of nodes

ACKNOWLEDGMENTS MW and RVD have been supported by the German Federal Ministry for Education and Research (BMBF) via the Young Investigators Group CoSy-CC2 (grant no. 01LN1306A). JFD thanks the Stordalen Foundation and BMBF (project GLUES) for financial support. JK acknowledges the IRTG 1740 funded by DFG and FAPESP. MT Gastner is acknowledged for providing his data on the airline, interstate, and Internet network. P Menck thankfully provided his data on the Scandinavian power grid. We thank S Willner on behalf of the entire zeean team for providing the data on the world trade network. All computations have been performed using the Python package pyunicorn [41] that is available at https://github.com/pik-copan/pyunicorn.

Basement structure of the Hontomín CO2 storage site (Spain) determined by integration of microgravity and 3D seismic data

We dedicate this paper to the memory of Prof. Andres Perez Estaún, who was a great and committed scientist, wonderful colleague and even better friend. The datasets in this work have been funded by Fundación Ciudad de la Energía (Spanish Government, www.ciuden.es) and by the European Union through the “European Energy Programme 15 for Recovery” and the Compostilla OXYCFB300 project. Dr. Juan Alcalde is currently funded by NERC grant NE/M007251/1. Simon Campbell and Samuel Cheyney are acknowledged for thoughtful comments on gravity inversion

Structure and mechanical properties of sodium and calcium caseinate edible active films with carvacrol

Edible active films based on sodium caseinate (SC) and calcium caseinate (CC) plasticized with glycerol (G) at three different concentrations and carvacrol (CRV) as active agent were prepared by solvent casting. Transparent films were obtained and their surfaces were analysed by optical microscopy and scanning electron microscopy (SEM). The influence of the addition of three different plasticizer concentrations was studied by determining tensile properties, while Fourier transformed infrared spectroscopy (FTIR) and thermogravimetric analysis (TGA) were used to evaluate the structural and thermal behavior of such films. The addition of glycerol resulted in a reduction in the elastic modulus and tensile strength, while some increase in the elongation at break was observed. In general terms, SC films showed flexibility higher than the corresponding CC counterparts. In addition, the presence of carvacrol caused further improvements in ductile properties suggesting the presence of stronger interactions between the protein matrix and glycerol, as it was also observed in thermal degradation studies. FTIR spectra of all films showed the characteristic bands and peaks corresponding to proteins as well as to primary and secondary alcohols. In summary, the best results regarding mechanical and structural properties for caseinates-based films containing carvacrol were found for the formulations with high glycerol concentrations.

Optimal model through identified frequencies of a masonry building structure with wooden floors

The paper presents the analysis of an important historical building: the Saint James Theater in the city of Corfù (Greece) actually used as the Municipality House. The building, located in the center of the city, is made of carves stones and is characterized by a stocky shape and by the presence of wooden floors. The study deals with the structural identification of such structure through the analysis of its ambient vibrations recorded by means of accelerometers with high accuracy. A full dynamic testing was developed using ambient vibrations to identify the main modal parameters and to make a non-destructive characterization of this building. The results of these dynamic tests are compared with the modal analysis of a complex finite element (FE) simulation of the structure. This analysis may present several problems and uncertainties for this stocky building. Due to the presence of wooden floors, the local modes can be highly excited and, as a consequence, the evaluation of the structural modal parameters presents some difficulties.

Interplay Between Structure, Stoichiometry, and Electron Transfer Dynamics in SILAR-based Quantum Dot-Sensitized Oxides

We quantify the rate and efficiency of picosecond electron transfer (ET) from PbS nanocrystals, grown by successive ionic layer adsorption and reaction (SILAR), into a mesoporous SnO2 support. Successive SILAR deposition steps allow for stoichiometry- and size-variation of the QDs, characterized using transmission electron microscopy. Whereas for sulfur-rich (p-type) QD surfaces substantial electron trapping at the QD surface occurs, for lead-rich (n-type) QD surfaces, the QD trapping channel is suppressed and the ET efficiency is boosted. The ET efficiency increase achieved by lead-rich QD surfaces is found to be QD-size dependent, increasing linearly with QD surface area. On the other hand, ET rates are found to be independent of both QD size and surface stoichiometry, suggesting that the donor–acceptor energetics (constituting the driving force for ET) are fixed due to Fermi level pinning at the QD/oxide interface. Implications of our results for QD-sensitized solar cell design are discussed.

Role of the interfacial water structure on electrocatalysis: Oxygen reduction on Pt(1 1 1) in methanesulfonic acid

Most of electrocatalytic reactions occur in an aqueous environment. Understanding the influence of water structure on reaction dynamics is fundamental in electrocatalysis. In this work, the role of liquid water structure on the oxygen reduction at Pt(1 1 1) electrode is analyzed in methanesulfonic (MTSA) and perchloric acids. This is because these different anions can exert a different influence on liquid water structure. Results reveal a lower ORR electrode activity in MTSA than in HClO4 solutions and they are discussed in light of anion's influence on water structural ordering. From them, the existence of an outer-sphere, rate determining, step in the ORR mechanism is suggested.

Palladium(II) complexes with a phosphino-oxime ligand: synthesis, structure and applications to the catalytic rearrangement and dehydration of aldoximes

The treatment of [PdCl2(COD)] (COD = 1,5-cyclooctadiene) with 1 and 2 equivalents of 2-(diphenylphosphino)benzaldehyde oxime in dichloromethane at room temperature led to the selective formation of [PdCl2{κ2-(P,N)-2-Ph2PC6H4CH[double bond, length as m-dash]NOH}] (1) and [Pd{κ2-(P,N)-2-Ph2PC6H4CH[double bond, length as m-dash]NOH}2][Cl]2 (2), respectively, which represent the first examples of Pd(II) complexes containing a phosphino-oxime ligand. These compounds, whose structures were fully confirmed by X-ray diffraction methods, were active in the catalytic rearrangement of aldoximes. In particular, using 5 mol% complex 1, a large variety of aldoximes could be cleanly converted into the corresponding primary amides at 100 °C, employing water as solvent and without the assistance of any cocatalyst. Palladium nanoparticles are the active species in the rearrangement process. In addition, when the same reactions were performed employing acetonitrile as solvent, selective dehydration of the aldoximes to form the respective nitriles was observed. For comparative purposes, the catalytic behaviour of an oxime-derived palladacyclic complex has also been briefly evaluated.

Tiburzio Spannocchi’s project for the fortifications of Fuenterrabía in 1580

Fuenterrabía (Hondarribia) is a town located on the Franco-Spanish border. Between the 16th and 19th centuries it was considered to be one of the most outstanding strongholds in the Basque Country due to its strategic position. The bastion system of fortification was extremely prevalent in this stronghold. It was one of the first Spanish towns to adopt the incipient Renaissance designs of the bastion. The military engineers subsequently carried out continuous fortification projects that enabled the structure to withstand the advances being made in artillery and siege tactics. After the construction of the citadel of Pamplona had begun in 1571, following the design of the prestigious military engineer, Jacobo Palear Fratín and being revised by Viceroy Vespasiano Gonzaga, the aforementioned engineer undertook an ambitious project commissioned by Felipe II to modernise the fortifications of Fuenterrabía. Neither the plans nor the report of this project have been conserved, but in the year 2000, César Fernández Antuña published the report written by Spannocchi on the state of the fortifications of Fuenterrabía when he arrived to the Spanish peninsula, discovered in the Archivo Histórico Provincial de Zaragoza. This document conducts an in-depth analysis of Spannocchi’s project and how it was related to Fratín’s previous project. It concludes that this project encountered problems in updating the new bastions at the end of the 16th century, and identifies the factors which prevented the stronghold from being extended as was the case in Pamplona after Fratín’s project.

Assessing the Implementation of a Secondary Plan Using a Conformance-Based GIS Method: A Pilot Project in Winnipeg, Manitoba

This case study evaluates the implementation of a secondary land use plan in Winnipeg, MB. The area selected for this case study is the Northeast Neighbourhood located in Waverley West; the development of this neighbourhood was guided by the Northeast Neighbourhood Area Structure Plan (NNASP). This case study evaluates the implementation of the NNASP through a conformance analysis which answers the following research questions: 1) Does the developed land use pattern in the NNASP area conform to what was planned; and 2) Does the implementation of the NNASP conform to the goals, objectives, policies, and intent of the plan? The implementation of the NNASP was evaluated against 62 evaluation criteria which were generated based on the policies of the NNASP. Using this method, the development of the Northeast Neighbourhood is effectively evaluated against the requirements of the NNASP. This conformity test utilized threefold approach including GIS analysis, a site visit, and document analysis.

Key Issues in Agricultural Labour Markets: A Review of Major Studies and Project Reports on Agriculture and Rural Labour Markets. Factor Markets Working Paper No. 20, February 2012

This paper provides a synthesis of the empirical literature on the key issues in agricultural and rural labour markets since 1960s, drawing mainly upon studies from the United States and the European Union, but also including relevant material from developing countries. The contribution of this meta-analysis lies in its unique structure as it covers the main research questions which have been addressed in the literature and includes the most cited papers from the American Journal of Agricultural Economics, Journal of Agricultural Economics, European Review of Agricultural Economics, Agricultural Economics as well as other reports and EU funded projects. Each research question is accompanied by tabular summaries which classify the individual studies according to the methodology and the variables employed. The heterogeneous conditions across countries, the different research questions and methodologies, and the type of data employed, have sometimes led to conflicting results. Nonetheless, by comparing the results it is possible to assess the significance and the direction of the determinants of rural labour allocation and its adjustments, and thus contribute to a better understanding on the functioning of rural labour markets. Lastly, by recognising the importance of the institutional framework, the paper provides useful policy insights.

Public Procurement in the Transatlantic Trade and Investment Partnership Negotiations. Paper No. 2 in the CEPS-CTR project "TTIP in the Balance" and CEPS Special Report No. 100/February 2015

For more than 20 years, the United States and the European Union have engaged in often-contentious negotiations over access to government procurement. The EU is dissatisfied with the level of procurement that the US has opened under the WTO Government Procurement Agreement and, as a consequence, it does not give the US its most comprehensive coverage. The US has been constrained in responding to the EU’s requests for greater access, especially to state procurement, by both its federal structure of government and by domestic purchasing requirements. At the current time, neither party has proposed a way to break the impasse. This paper reviews the current state of affairs between the US and the EU on government procurement, examining the procurement that they open to one another and the procurement that they withhold. It then proposes a strategy for the two sides to use the TTIP negotiations to move forward. This strategy includes both steps to expand their current commitments in the TTIP, as well as to develop a longer-term approach by making the TTIP a ‘living agreement’. This strategy suggests that the EU and the US could find a way to expand their access to government procurement contracts and at least partially defuse the issue.

Mean grain size and structure of ODP Hole 140-504B samples

Microstructural investigations of ocean crust samples provide a complementary approach to both marine surveys and laboratory experiments. The recovery of relatively undeformed diabases from Deep Sea Drilling Project (DSDP)/Ocean Drilling Program (ODP) Hole 504B provides a first opportunity to examine a reference section of microstructural features that influence strain localization at depths of 2 km in the ocean crust. Syn- and post-crystallization features in plagioclase and augite crystals have been examined by optical microscopy and secondary and backscattered electron imaging. These features show a strong influence of modal composition and primary textures on early sites of strain localization. Thermal cracking and subsequent alteration intensities and distribution are strongly phase dependent. A consistently higher intragranular fracture density is observed in augite crystals relative to plagioclase. The impact of alteration on the mechanical response of diabases is likely to depend on the primary textural characteristics. Even where extensive augite alteration occurs, the rock remains supported by a framework of weakly altered plagioclase crystals. The Hole 504B diabases from Leg 140 provide a valuable comparison for future studies of more deformed sections likely to be encountered at depth. Advances in constraining the detailed rheology of the ocean crust at spreading centers would benefit from experimental deformation of texturally diverse diabase and gabbro samples.

The development of an apparatus for cutting tooth structure by means of ultrasonic vibrations. research progress report.

"Project no. NM 008 015.08"

Structure response /

Project Sedan.

Minnesota History Center Competition, St. Paul, Minnesota, 1984-1986 (unbuilt project)

[Conceptual Sketch of Structure], untitled. Blue ink sketch on tracing paper with notations, initialed, 12x16 inches [from photographic copy by Lance Burgharrdt]