Formal function and phrase structure in contemporary music : Pierre Boulez’s late solo works and Sean Clarke’s "Lucretia Overture" and "4 Impromptus"

Cette thèse présente une théorie de la fonction formelle et de la structure des phrases dans la musique contemporaine, théorie qui peut être utilisée aussi bien comme outil analytique que pour créer de nouvelles œuvres. Deux concepts théoriques actuels aident à clarifier la structure des phrases : les projections temporelles de Christopher Hasty et la théorie des fonctions formelles de William Caplin, qui inclut le concept de l’organisation formelle soudée versus lâche (tight-knit vs. loose). Les projections temporelles sont perceptibles grâce à l’accent mis sur les paramètres secondaires, comme le style du jeu, l’articulation et le timbre. Des sections avec une organisation formelle soudée ont des projections temporelles claires, qui sont créées par la juxtaposition des motifs distincts, généralement sous la forme d'une idée de base en deux parties. Ces projections organisent la musique en phrases de présentation, en phrases de continuité et finalement, à des moments formels charnières, en phrases cadentielles. Les sections pourvues d’une organisation plus lâche tendent à présenter des projections et mouvements harmoniques moins clairs et moins d’uniformité motivique. La structure des phrases de trois pièces tardives pour instrument soliste de Pierre Boulez est analysée : Anthèmes I pour violon (1991-1992) et deux pièces pour piano, Incises (2001) et une page d’éphéméride (2005). Les idées proposées dans le présent document font suite à une analyse de ces œuvres et ont eu une forte influence sur mes propres compositions, en particulier Lucretia Overture pour orchestre et 4 Impromptus pour flûte, saxophone soprano et piano, qui sont également analysés en détail. Plusieurs techniques de composition supplémentaires peuvent être discernés dans ces deux œuvres, y compris l'utilisation de séquence mélodiques pour contrôler le rythme harmonique; des passages composés de plusieurs couches musicales chacun avec un structure de phrase distinct; et le relâchement de l'organisation formelle de matériels récurrents. Enfin, la composition de plusieurs autres travaux antérieurs a donné lieu à des techniques utilisées dans ces deux œuvres et ils sont brièvement abordés dans la section finale.

Mitigating Social Risk in the Extractive Sector: Developing Intercultural Competence as a Tool for Negotiating Western-Indigenous Perspectives within the Undergraduate Mining Engineering Curriculum

Drawing upon critical, communications, and educational theories, this thesis develops a novel framing of the problem of social risk in the extractive sector, as it relates to the building of respectful relationships with indigenous peoples. Building upon Bakhtin’s dialogism, the thesis demonstrates the linkage of this aspect of social risk to professional education, and specifically, to the undergraduate mining engineering curriculum, and develops a framework for the development of skills related to intercultural competence in the education of mining engineers. The knowledge of social risk, as well as the level of intercultural competence, of students in the mining engineering program, is investigated through a mixture of surveys and focus groups – as is the impact of specific learning interventions. One aspect of this investigation is whether development of these attributes alters graduates’ conception of their identity as mining engineers, i.e. the range and scope of responsibilities, and understanding of to whom responsibilities are owed, and their role in building trusting relationships with communities. Survey results demonstrate that student openness to the perspectives of other cultures increases with exposure to the second year curriculum. Students became more knowledgeable about social dimensions of responsible mining, but not about cultural dimensions. Analysis of focus group data shows that students are highly motivated to improve community perspectives and acceptance. It is observed that students want to show respect for diverse peoples and communities where they will work, but they are hampered by their inability to appreciate the viewpoints of people who do not share their values. They embrace benefit sharing and environmental protection as norms, but they mistakenly conclude that opposition to mining is rooted in a lack of education rather than in cultural values. Three, sequential, threshold concepts are identified as impeding development of intercultural competence: Awareness and Acknowledgement of Different Forms of Knowledge; Recognition that Value Systems are a Function of Culture; Respect for varied perceptions of Social Wellbeing and Quality of Life. Future curriculum development in the undergraduate mining engineering program, as well as in other educational programs relevant to the extractive sector, can be effectively targeted by focusing on these threshold concepts.

The Performance Characteristics of a Surface-Modified Cutting Tool

In the past, many papers have been presented which show that the coating of cutting tools often yields decreased wear rates and reduced coefficients of friction. Although different theories are proposed, covering areas such as hardness theory, diffusion barrier theory, thermal barrier theory, and reduced friction theory, most have not dealt with the question of how and why the coating of tool substrates with hard materials such as Titanium Nitride (TiN), Titanium Carbide (TiC) and Aluminium Oxide (Al203) transforms the performance and life of cutting tools. This project discusses the complex interrelationship that encompasses the thermal barrier function and the relatively low sliding friction coefficient of TiN on an undulating tool surface, and presents the result of an investigation into the cutting characteristics and performance of EDMed surface-modified carbide cutting tool inserts. The tool inserts were coated with TiN by the physical vapour deposition (PVD) method. PVD coating is also known as Ion-plating which is the general term of the coating method in which the film is created by attracting ionized metal vapour in this the metal was Titanium and ionized gas onto negatively biased substrate surface. Coating by PVD was chosen because it is done at a temperature of not more than 5000C whereas chemical Vapour Deposition CVD process is done at very high temperature of about 8500C and in two stages of heating up the substrates. The high temperatures involved in CVD affects the strength of the (tool) substrates. In this study, comparative cutting tests using TiN-coated control specimens with no EDM surface structures and TiN-coated EDMed tools with a crater-like surface topography were carried out on mild steel grade EN-3. Various cutting speeds were investigated, up to an increase of 40% of the tool manufacturer’s recommended speed. Fifteen minutes of cutting were carried out for each insert at the speeds investigated. Conventional tool inserts normally have a tool life of approximately 15 minutes of cutting. After every five cuts (passes) microscopic pictures of the tool wear profiles were taken, in order to monitor the progressive wear on the rake face and on the flank of the insert. The power load was monitored for each cut taken using an on-board meter on the CNC machine to establish the amount of power needed for each stage of operation. The spindle drive for the machine is an 11 KW/hr motor. Results obtained confirmed the advantages of cutting at all speeds investigated using EDMed coated inserts, in terms of reduced tool wear and low power loads. Moreover, the surface finish on the workpiece was consistently better for the EDMed inserts. The thesis discusses the relevance of the finite element method in the analysis of metal cutting processes, so that metal machinists can design, manufacture and deliver goods (tools) to the market quickly and on time without going through the hassle of trial and error approach for new products. Improvements in manufacturing technologies require better knowledge of modelling metal cutting processes. Technically the use of computational models has a great value in reducing or even eliminating the number of experiments traditionally used for tool design, process selection, machinability evaluation, and chip breakage investigations. In this work, much interest in theoretical and experimental investigations of metal machining were given special attention. Finite element analysis (FEA) was given priority in this study to predict tool wear and coating deformations during machining. Particular attention was devoted to the complicated mechanisms usually associated with metal cutting, such as interfacial friction; heat generated due to friction and severe strain in the cutting region, and high strain rates. It is therefore concluded that Roughened contact surface comprising of peaks and valleys coated with hard materials (TiN) provide wear-resisting properties as the coatings get entrapped in the valleys and help reduce friction at chip-tool interface. The contributions to knowledge: a. Relates to a wear-resisting surface structure for application in contact surfaces and structures in metal cutting and forming tools with ability to give wear-resisting surface profile. b. Provide technique for designing tool with roughened surface comprising of peaks and valleys covered in conformal coating with a material such as TiN, TiC etc which is wear-resisting structure with surface roughness profile compose of valleys which entrap residual coating material during wear thereby enabling the entrapped coating material to give improved wear resistance. c. Provide knowledge for increased tool life through wear resistance, hardness and chemical stability at high temperatures because of reduced friction at the tool-chip and work-tool interfaces due to tool coating, which leads to reduced heat generation at the cutting zones. d. Establishes that Undulating surface topographies on cutting tips tend to hold coating materials longer in the valleys, thus giving enhanced protection to the tool and the tool can cut faster by 40% and last 60% longer than conventional tools on the markets today.

Effect of vitamin D supplementation on bone status, glucose homeostasis and immune function in children with vitamin D deficiency

Background: Between 1961-1971 vitamin D deficiency was recognized as a public health issue in the UK, because of the lack of effective sunlight and the population mix [1, 2]. In recent years, health care professionals have cited evidence suggesting a re-emergence of the vitamin D deficiency linked to a number of health consequences as a concern [3-6]. Evidence from observational studies has linked low vitamin D status with impairment in glucose homeostasis and immune dysfunction [7-9]. However, interventional studies, particularly those focused on paediatric populations, have been limited and inconsistent. There is a need for detailed studies, to clarify the therapeutic benefits of vitamin D in these important clinical areas. Objective: The aims of this PhD thesis were two-fold. Firstly, to perform preliminary work assessing the association between vitamin D deficiency and bone status, glucose homeostasis and immune function, and to explore any changes in these parameters following short term vitamin D3 replacement therapy. Secondly, to assess the effectiveness of an electronic surveillance system (ScotPSU) as a tool to determine the current incidence of hospital-based presentation of childhood vitamin D deficiency in Scotland. Methods: Active surveillance was performed for a period of two years as a part of an electronic web-based surveillance programme performed by the Scottish Paediatric Surveillance Unit (ScotPSU). The validity of the system was assessed by identifying cases with profound vitamin D deficiency (in Glasgow and Edinburgh) from the regional laboratory. All clinical details were checked against those identified using the surveillance system. Thirty-seven children aged 3 months to 10 years, who had been diagnosed with vitamin D deficiency, were recruited for the bone, glucose and immunity studies over a period of 24 months. Twenty-five samples were analysed for the glucose and bone studies; of these, 18 samples were further analysed for immune study. Treatment consisted of six weeks taking 5000 IU units cholecalciferol orally once a day. At baseline and after completion of treatment, 25 hydroxyvitamin D (25(OH)D), parathyroid hormone (PTH), alkaline phosphatase (ALP), collagen type 1 cross-linked C-telopeptide (CTX), osteocalcin (OCN), calcium, phosphate, insulin, glucose, homeostasis model assessment index, estimated insulin resistance (HOMA IR), glycated hemoglobin (HbA1c), sex hormone binding globulin (SHBG), lipids profiles, T helper 1 (Th1) cytokines (interleukin-2 ( IL-2), tumor necrosis factors-alpha (TNF-α), interferon-gamma (INF-γ)), T helper 2 (Th2) cytokines (interleukin-4 (IL-4), interleukin-5 (IL-5), interleukin-6 (IL-6)), T helper 17 (Th17) cytokine (interleukin-17 (IL-17)), Regulatory T (Treg) cytokine (interleukin-10 (IL-10)) and chemokines/cytokines, linked with Th1/Th2 subset balance and/or differentiation (interleukin-8 (IL-8), interleukin-12 (IL-12), eosinophil chemotactic protein ( EOTAXIN), macrophage inflammatory proteins-1beta (MIP-1β), interferon-gamma-induced protein-10 (IP-10), regulated on activation, normal T cell expressed and secreted (RANTES), monocyte chemoattractant protein-1(MCP-1)) were measured. Leukoocyte subset analysis was performed for T cells, B cells and T regulatory cells and a luminex assay was used to measure the cytokiens. Results: Between September 2009 and August 2011, 163 cases of vitamin D deficiency were brought to the attention of the ScotPSU, and the majority of cases (n = 82) were reported in Glasgow. The cross-validation checking in Glasgow and Edinburgh over a one-year period revealed only 3 (11%) cases of clearly symptomatic vitamin D deficiency, which had been missed by the ScotPSU survey in Glasgow. While 16 (67%) symptomatic cases had failed to be reported through the ScotPSU survey in Edinburgh. For the 23 children who are included in bone and glucose studies, 22 (96%) children had basal serum 25(OH)D in the deficiency range (< 50 nmol/l) and one (4%) child had serum 25(OH)D in the insufficiency range (51-75 nmol/l). Following vitamin D3 treatment, 2 (9%) children had final serum 25(OH)D lower than 50 nmol/l, 6 (26%) children had final serum 25(OH)D between >50-75 nmol/l, 12 (52%) children reached a final serum 25(OH)D >75-150 nmol/l and finally 3 (13%) exceeded the normal reference range with a final 25(OH)D >150 nmol/l. Markers for remodelling ALP and PTH had significantly decreased (p = 0.001 and <0.0001 for ALP and PTH respectively). In 17 patients for whom insulin and HOMA IR data were available and enrolled in glucose study, significant improvements in insulin resistance (p = 0.04) with a trend toward a reduction in serum insulin (p = 0.05) was observed. Of those 14 children who had their cytokines profile data analysed and enrolled in the immunity study, insulin and HOMA IR data were missed in one child. A significant increase in the main Th2 secreted cytokine IL-4 (p = 0.001) and a tendency for significant increases in other Th2 secreted cytokines IL-5 (p = 0.05) and IL-6 (p = 0.05) was observed following vitamin D3 supplementation. Conclusion: An electronic surveillance system can provide data for studying the epidemiology of vitamin D deficiency. However, it may underestimate the number of positive cases. Improving vitamin D status in vitamin D deficient otherwise healthy children significantly improved their vitamin D deficient status, and was associated with an improvement in bone profile, improvements in insulin resistance and an alteration in main Th2 secreting cytokines.

Formal function and phrase structure in contemporary music : Pierre Boulez’s late solo works and Sean Clarke’s "Lucretia Overture" and "4 Impromptus"

Cette thèse présente une théorie de la fonction formelle et de la structure des phrases dans la musique contemporaine, théorie qui peut être utilisée aussi bien comme outil analytique que pour créer de nouvelles œuvres. Deux concepts théoriques actuels aident à clarifier la structure des phrases : les projections temporelles de Christopher Hasty et la théorie des fonctions formelles de William Caplin, qui inclut le concept de l’organisation formelle soudée versus lâche (tight-knit vs. loose). Les projections temporelles sont perceptibles grâce à l’accent mis sur les paramètres secondaires, comme le style du jeu, l’articulation et le timbre. Des sections avec une organisation formelle soudée ont des projections temporelles claires, qui sont créées par la juxtaposition des motifs distincts, généralement sous la forme d'une idée de base en deux parties. Ces projections organisent la musique en phrases de présentation, en phrases de continuité et finalement, à des moments formels charnières, en phrases cadentielles. Les sections pourvues d’une organisation plus lâche tendent à présenter des projections et mouvements harmoniques moins clairs et moins d’uniformité motivique. La structure des phrases de trois pièces tardives pour instrument soliste de Pierre Boulez est analysée : Anthèmes I pour violon (1991-1992) et deux pièces pour piano, Incises (2001) et une page d’éphéméride (2005). Les idées proposées dans le présent document font suite à une analyse de ces œuvres et ont eu une forte influence sur mes propres compositions, en particulier Lucretia Overture pour orchestre et 4 Impromptus pour flûte, saxophone soprano et piano, qui sont également analysés en détail. Plusieurs techniques de composition supplémentaires peuvent être discernés dans ces deux œuvres, y compris l'utilisation de séquence mélodiques pour contrôler le rythme harmonique; des passages composés de plusieurs couches musicales chacun avec un structure de phrase distinct; et le relâchement de l'organisation formelle de matériels récurrents. Enfin, la composition de plusieurs autres travaux antérieurs a donné lieu à des techniques utilisées dans ces deux œuvres et ils sont brièvement abordés dans la section finale.

A Multi-Criteria GIS-Based Route Selection Tool for Hazardous Material Transport: Consideration of Environmental Consequence, Traffic Congestions and Costs

Hazardous materials are substances that, if not regulated, can pose a threat to human populations and their environmental health, safety or property when transported in commerce. About 1.5 million tons of hazardous material shipments are transported by truck in the US annually, with a steady increase of approximately 5% per year. The objective of this study was to develop a routing tool for hazardous material transport in order to facilitate reduced environmental impacts and less transportation difficulties, yet would also find paths that were still compelling for the shipping carriers as a matter of trucking cost. The study started with identification of inhalation hazard impact zones and explosion protective areas around the location of hypothetical hazardous material releases, considering different parameters (i.e., chemicals characteristics, release quantities, atmospheric condition, etc.). Results showed that depending on the quantity of release, chemical, and atmospheric stability (a function of wind speed, meteorology, sky cover, time and location of accidents, etc.) the consequence of these incidents can differ. The study was extended by selection of other evaluation criteria for further investigation because health risk as an evaluation criterion would not be the only concern in selection of routes. Transportation difficulties (i.e., road blockage and congestion) were incorporated as important factor due to their indirect impact/cost on the users of transportation networks. Trucking costs were also considered as one of the primary criteria in selection of hazardous material paths; otherwise the suggested routes would have not been convincing for the shipping companies. The last but not least criterion was proximity of public places to the routes. The approach evolved from a simple framework to a complicated and efficient GIS-based tool able to investigate transportation networks of any given study area, and capable of generating best routing options for cargos. The suggested tool uses a multi-criteria-decision-making method, which considers the priorities of the decision makers in choosing the cargo routes. Comparison of the routing options based on each criterion and also the overall suitableness of the path in regards to all the criteria (using a multi-criteria-decision-making method) showed that using similar tools as the one proposed by this study can provide decision makers insights in the area of hazardous material transport. This tool shows the probable consequences of considering each path in a very easily understandable way; in the formats of maps and tables, which makes the tradeoffs of costs and risks considerably simpler, as in some cases slightly compromising on trucking cost may drastically decrease the probable health risk and/or traffic difficulties. This will not only be rewarding to the community by making cities safer places to live, but also can be beneficial to shipping companies by allowing them to advertise as environmental friendly conveyors.

New trends in food science: the use of nutraceuticals as an antiinflammatory therapeutic tool in exercise

Prolonged high-intensity training seems to result in increased systemic inflammation, which might explain muscle injury, delayed onset muscle soreness, and overtraining syndrome in athletes. Furthermore, an impaired immune function caused by strenuous exercise leads to the development of upper respiratory tract infections in athletes. Nutraceuticals might help counteract these performance-lowering effects. The use of nanotechnology is an interesting alternative to supply athletes with nutraceuticals, as many of these substances are insoluble in water and are poorly absorbed in the digestive tract. The present chapter starts with a brief review of the effects of exercise on immunity, followed by an analysis on how nutraceuticals such as omega-3 fatty acids, glutamine, BCAAs, or phytochemicals can counteract negative effects of strenuous exercise in athletes. Finally, how nanostructured delivery systems can constitute a new trend in enhancing bioavailability and optimizing the action of nutraceuticals will be discussed, using the example of food beverages.

Practical assessment on the run – iPads as an effective mobile and paperless tool in physical education and teaching

This paper investigates the use of iPads in the assessment of predominantly second year Bachelor of Education (Primary/Early Childhood) pre-service teachers undertaking a physical education and health unit. Within this unit, practical assessment tasks are graded by tutors in a variety of indoor and outdoor settings. The main barriers for the lecturer or tutor for effective assessment in these contexts include limited time to assess and the provision of explicit feedback for large numbers of students, complex assessment procedures, overwhelming record-keeping and assessing students without distracting from the performance being presented. The purpose of this pilot study was to investigate whether incorporating mobile technologies such as iPads to access online rubrics within the Blackboard environment would enhance and simplify the assessment process. Results from the findings indicate that using iPads to access online rubrics was successful in streamlining the assessment process because it provided pre-service teachers with immediate and explicit feedback. In addition, tutors experienced a reduction in the amount of time required for the same workload by allowing quicker forms of feedback via the iPad dictation function. These outcomes have future implications and potential for mobile paperless assessment in other disciplines such as health, environmental science and engineering.

“Nanoglial interfaces: nanostructured materials, interfaces and devices to unveil the role of astrocytes in brain function and dysfunction”

The role of non-neuronal brain cells, called astrocytes, is emerging as crucial in brain function and dysfunction, encompassing the neurocentric concept that was envisioning glia as passive components. Ion and water channels and calcium signalling, expressed in functional micro and nano domains, underpin astrocytes’ homeostatic function, synaptic transmission, neurovascular coupling acting either locally and globally. In this respect, a major issue arises on the mechanism through which astrocytes can control processes across scales. Finally, astrocytes can sense and react to extracellular stimuli such as chemical, physical, mechanical, electrical, photonic ones at the nanoscale. Given their emerging importance and their sensing properties, my PhD research program had the general goal to validate nanomaterials, interfaces and devices approaches that were developed ad-hoc to study astrocytes. The results achieved are reported in the form of collection of papers. Specifically, we demonstrated that i) electrospun nanofibers made of polycaprolactone and polyaniline conductive composites can shape primary astrocytes’ morphology, without affecting their function ii) gold coated silicon nanowires devices enable extracellular recording of unprecedented slow wave in primary differentiated astrocytes iii) colloidal hydrotalcites films allow to get insight in cell volume regulation process in differentiated astrocytes and to describe novel cytoskeletal actin dynamics iv) gold nanoclusters represent nanoprobe to trigger astrocytes structure and function v) nanopillars of photoexcitable organic polymer are potential tool to achieve nanoscale photostimulation of astrocytes. The results were achieved by a multidisciplinary team working with national and international collaborators that are listed and acknowledged in the text. Collectively, the results showed that astrocytes represent a novel opportunity and target for Nanoscience, and that Nanoglial interface might help to unveil clues on brain function or represent novel therapeutic approach to treat brain dysfunctions.

Computational tool for three-point hitch geometry optimization

The weight-transfer effect, consisting of the change in dynamic load distribution between the front and the rear tractor axles, is one of the most impairing phenomena for the performance, comfort, and safety of agricultural operations. Excessive weight transfer from the front to the rear tractor axle can occur during operation or maneuvering of implements connected to the tractor through the three-point hitch (TPH). In this respect, an optimal design of the TPH can ensure better dynamic load distribution and ultimately improve operational performance, comfort, and safety. In this study, a computational design tool (The Optimizer) for the determination of a TPH geometry that minimizes the weight-transfer effect is developed. The Optimizer is based on a constrained minimization algorithm. The objective function to be minimized is related to the tractor front-to-rear axle load transfer during a simulated reference maneuver performed with a reference implement on a reference soil. Simulations are based on a 3-degrees-of-freedom (DOF) dynamic model of the tractor-TPH-implement aggregate. The inertial, elastic, and viscous parameters of the dynamic model were successfully determined through a parameter identification algorithm. The geometry determined by the Optimizer complies with the ISO-730 Standard functional requirements and other design requirements. The interaction between the soil and the implement during the simulated reference maneuver was successfully validated against experimental data. Simulation results show that the adopted reference maneuver is effective in triggering the weight-transfer effect, with the front axle load exhibiting a peak-to-peak value of 27.1 kN during the maneuver. A benchmark test was conducted starting from four geometries of a commercially available TPH. As result, all the configurations were optimized by above 10%. The Optimizer, after 36 iterations, was able to find an optimized TPH geometry which allows to reduce the weight-transfer effect by 14.9%.

Physical activity as a tool to improve the quality of life for individuals with hip or knee osteoarthritis

Total hip and knee replacements (THR/TKR) are considered the gold standard surgical treatments for end-stage osteoarthritis (OA), effectively alleviating pain, enhancing joint mobility and quality of life (QoL). Maintaining an active lifestyle and regular physical activity (PA) is crucial for these patients, as it can increase bone density and stability of joint prosthesis. This thesis aims to: (1) systematically review recommendations from healthcare professionals; (2) explore interventions promoting an active lifestyle post-THR and TKR; (3) investigate the primary causes of stiffness post-TKR; (4) design an exercise protocol to enhance QoL post-THR and TKR; (5) evaluate orthopedic surgeons' attitudes toward PA for patients post-THR/TKR; and (6) assess changes in QoL after a specifically designed PA intervention. The initial review revealed consensus on permissible sports activities post-surgery, but few studies addressed interventions targeting PA behaviors. Subsequently, findings highlighted key factors contributing to post-TKR stiffness, including mispositioned components, psychological distress, and obesity. Building on these insights, a PA intervention was implemented, followed by a survey investigating orthopedic surgeons' attitudes towards PA, which demonstrated a general positive attitude. Lastly, a pilot randomized controlled trial demonstrated significant enhancements in QoL, physical function, and clinical outcomes following a three-month adapted PA intervention. Future research should focus on raising awareness among individuals and healthcare professionals, fostering engagement in PA programs, and promoting active lifestyles. PA represents a valuable strategy for mitigating the burden of chronic diseases on society.

Relationship Between Orofacial Function, Dentofacial Morphology, And Bite Force In Young Subjects.

The aim was to evaluate the relationship between orofacial function, dentofacial morphology, and bite force in young subjects. Three hundred and sixteen subjects were divided according to dentition stage (early, intermediate, and late mixed and permanent dentition). Orofacial function was screened using the Nordic Orofacial Test-Screening (NOT-S). Orthodontic treatment need, bite force, lateral and frontal craniofacial dimensions and presence of sleep bruxism were also assessed. The results were submitted to descriptive statistics, normality and correlation tests, analysis of variance, and multiple linear regression to test the relationship between NOT-S scores and the studied independent variables. The variance of NOT-S scores between groups was not significant. The evaluation of the variables that significantly contributed to NOT-S scores variation showed that age and presence of bruxism related to higher NOT-S total scores, while the increase in overbite measurement and presence of closed lip posture related to lower scores. Bite force did not show a significant relationship with scores of orofacial dysfunction. No significant correlations between craniofacial dimensions and NOT-S scores were observed. Age and sleep bruxism were related to higher NOT-S scores, while the increase in overbite measurement and closed lip posture contributed to lower scores of orofacial dysfunction.

Impaired Compensatory Beta-cell Function And Growth In Response To High-fat Diet In Ldl Receptor Knockout Mice.

In this study, we investigated the effect of low density lipoprotein receptor (LDLr) deficiency on gap junctional connexin 36 (Cx36) islet content and on the functional and growth response of pancreatic beta-cells in C57BL/6 mice fed a high-fat (HF) diet. After 60 days on regular or HF diet, the metabolic state and morphometric islet parameters of wild-type (WT) and LDLr-/- mice were assessed. HF diet-fed WT animals became obese and hypercholesterolaemic as well as hyperglycaemic, hyperinsulinaemic, glucose intolerant and insulin resistant, characterizing them as prediabetic. Also they showed a significant decrease in beta-cell secretory response to glucose. Overall, LDLr-/- mice displayed greater susceptibility to HF diet as judged by their marked cholesterolaemia, intolerance to glucose and pronounced decrease in glucose-stimulated insulin secretion. HF diet induced similarly in WT and LDLr-/- mice, a significant decrease in Cx36 beta-cell content as revealed by immunoblotting. Prediabetic WT mice displayed marked increase in beta-cell mass mainly due to beta-cell hypertrophy/replication. Nevertheless, HF diet-fed LDLr-/- mice showed no significant changes in beta-cell mass, but lower islet-duct association (neogenesis) and higher beta-cell apoptosis index were seen as compared to controls. The higher metabolic susceptibility to HF diet of LDLr-/- mice may be explained by a deficiency in insulin secretory response to glucose associated with lack of compensatory beta-cell expansion.

Long-term Postoperative Atrophy Of Contralateral Hippocampus And Cognitive Function In Unilateral Refractory Mtle With Unilateral Hippocampal Sclerosis.

This study aimed to evaluate long-term atrophy in contralateral hippocampal volume after surgery for unilateral MTLE, as well as the cognitive outcome for patients submitted to either selective transsylvian amygdalohippocampectomy (SelAH) or anterior temporal lobe resection (ATL). We performed a longitudinal study of 47 patients with MRI signs of unilateral hippocampal sclerosis (23 patients with right-sided hippocampal sclerosis) who underwent surgical treatment for MTLE. They underwent preoperative/postoperative high-resolution MRI as well as neuropsychological assessment for memory and estimated IQ. To investigate possible changes in the contralateral hippocampus of patients, we included 28 controls who underwent two MRIs at long-term intervals. The volumetry using preoperative MRI showed significant hippocampal atrophy ipsilateral to the side of surgery when compared with controls (p<0.0001) but no differences in contralateral hippocampal volumes. The mean postoperative follow-up was 8.7 years (± 2.5 SD; median=8.0). Our patients were classified as Engel I (80%), Engel II (18.2%), and Engel III (1.8%). We observed a small but significant reduction in the contralateral hippocampus of patients but no volume changes in controls. Most of the patients presented small declines in both estimated IQ and memory, which were more pronounced in patients with left TLE and in those with persistent seizures. Different surgical approaches did not impose differences in seizure control or in cognitive outcome. We observed small declines in cognitive scores with most of these patients, which were worse in patients with left-sided resection and in those who continued to suffer from postoperative seizures. We also demonstrated that manual volumetry can reveal a reduction in volume in the contralateral hippocampus, although this change was mild and could not be detected by visual analysis. These new findings suggest that dynamic processes continue to act after the removal of the hippocampus, and further studies with larger groups may help in understanding the underlying mechanisms.

Doehlert Design-desirability Function Multi-criteria Optimal Separation Of 17 Phenolic Compounds From Extra-virgin Olive Oil By Capillary Zone Electrophoresis.

In Brazil, the consumption of extra-virgin olive oil (EVOO) is increasing annually, but there are no experimental studies concerning the phenolic compound contents of commercial EVOO. The aim of this work was to optimise the separation of 17 phenolic compounds already detected in EVOO. A Doehlert matrix experimental design was used, evaluating the effects of pH and electrolyte concentration. Resolution, runtime and migration time relative standard deviation values were evaluated. Derringer's desirability function was used to simultaneously optimise all 37 responses. The 17 peaks were separated in 19min using a fused-silica capillary (50μm internal diameter, 72cm of effective length) with an extended light path and 101.3mmolL(-1) of boric acid electrolyte (pH 9.15, 30kV). The method was validated and applied to 15 EVOO samples found in Brazilian supermarkets.