Turnover tecidual, desempenho e rendimento de carcaça em frangos de corte submetidos a diferentes níveis de metionina digestível

Pós-graduação em Zootecnia - FMVZ

Eficiência operacional, econômica e agronômica da inoculação de soja via sulco de semeadura

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Goma de soja na alimentação de frangos de corte: digestibilidade e desempenho

Pós-graduação em Ciência e Tecnologia Animal - FEIS

Seleção de genótipos de soja portadores ou não do gene RR por meio de análise multivariada e desempenho agronômico

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Adubação mineral com cobalto e molibdênio na cultura da soja

Altas produtividades de soja requerem grandes quantidades de nitrogênio, que podem ser obtidas principalmente, a partir da fixação simbiótica. No entanto, há possibilidade da eficiência desse processo biológico ser prejudicada pela deficiência de micronutrientes, especialmente de cobalto e molibdênio. Nesse contexto, objetivou-se com o presente trabalho avaliar a eficiência agronômica e a forma de aplicação de adubação mineral com cobalto e molibdênio na cultura da soja. Para tanto, a cultivar CD-206 foi submetida a diferentes tratamentos que consistiram da combinação entre aplicação de Co e Mo via tratamento de sementes e adubação foliar. As características agronômicas avaliadas foram o número de nódulos, massa seca da parte aérea, massa seca de raiz, número de vagens, número de grãos, massa de mil grãos e produção de grãos. A aplicação de molibdênio e cobalto via sementes e/ ou adubação foliar no estádio V4 (terceira folha trifoliolada completamente desenvolvida, quarto nó) promoveram incrementos significativos no rendimento da cultura. Respostas positivas ao cobalto e molibdênio também foram observadas no número de nódulos, vagens e grãos, com aumentos de até 240 kg ha-1 no rendimento da cultura. Os parâmetros agronômicos avaliados foram afetados positivamente pela aplicação de Co e Mo, principalmente quanto aplicado tanto via semente como foliar (TS + V4), inclusive para a produtividade de grãos. A forma de aplicação não foi significativamente distinta, ou seja, tanto a aplicação via semente como via foliar foram eficientes no fornecimento destes nutrientes para a cultura da soja.

Análise da variabilidade climática sobre a produtividade da soja no município de Bom Jesus (PI)

The climate is still main responsible for the variations soybean productivity (Glycine max (L.) Merrill), exerting a limiting action on these agricultural systems. The bomjesuense cerrado, this culture has proved, over the years, an increase of cultivated areas, however, productivity does not keep the same pace, going through periods of oscillations. Thus, although the crop is added to high technology, culture has great vulnerability to climatic adversities. Thus, the present study aims to analyze possible trends in meteorological variables, which can influence the soybean yield in Bom Jesus. For this purpose, different datasets were used, as follows: i) two periods of daily data (1984-2014 and 1974-2014), both obtained from the National Meteorological Institute (INMET); ii) climate normals from 1961-1990 as defined by INMET; iii) local agricultural production data of soybean-year (1997/1998 to 2012/2013) obtained from the Municipal Agricultural Production (PAM) dataset, which is management by Brazilian Institute of Geography and Statistics (IBGE). The analysis procedures included calculations of climate normals for 1984 to 2014 period and some statistical applications, as follows: i) the Wilcoxon test, used to evaluate differences between climate normals (1961 to 1990 and 1984 to 2014); ii) the Mann-Kendall nonparametric test, in order to analyze the linear trend of agrometeorological variables (rainfall, maximum temperature, minimum temperature and diurnal range of temperature; iii) cluster analysis by Ward method and the Spearman correlation test (rs) to identify the relationship between agrometeorological variable and soybean annual productivity. We adopted a statistical significance level of 5%. The results indicate changes in seasonality of the 1984-2014 climatology with respect to past climatology for all variables analyzed, except for insolation and precipitation. However, the monthly analysis of precipitation indicate negative trend during October and positive trend in December, causing a delay in start of rainy season. If this trend is persistent this result must be considered in futures definitions of the soybean crop sowing date over the region studied. With Mann-Kendall test was possible to identify positive trends with statistical significance in maximum temperature for all month forming part of soybean cycle (from November to April), which in turn tends to cause adverse effects on crop physiology, and consequently impacts on the final yield. Was identified a significant positive correlation between soybean yield and precipitation observed in March, thus precipitation deficit in this month is harmful to the soybean crop development. No statistically significant correlation was identified among maximum temperature, minimum temperature, and DTR with annual soybean productivity due these range of meteorological variables are not limiting factors in the final soybean yield in Bom Jesus (PI). It is expected that this study will contribute to propose planning strategies considering the role of climate variability on soybean crop final yield.

Alterações fisiológicas causadas por fungicidas em soja infectada naturalmente por oídio

Soybean crop is substantially important for both Brazilian and international markets. A relevant disease that affects soybeans is powdery mildew, caused by fungus Erysiphe diffusa. The objective of this master’s thesis was to analyze physiological changes produced by fungicides in two greenhouse-grown soybean genotypes (i.e., Anta 8500 RR and BRS Santa Cruz RR) naturally infected with powdery mildew. A complete randomized block design was used with six replications in a 2x5 factorial arrangement. Treatments consisted of applications of Azoxystrobin, Biofac (fermented solution of Penicillium sp.), Carbendazim or Picoxystrobin fungicides, and a Control (no fungicide application). Three applications were performed in the experimental period, and each eventually represented a period of data collection. Gas exchanges, chlorophyll content, fluorescence of chlorophyll a and disease severity were measured twice a week. Dry grain mass production was measured at the end of the experiment. Areas under progression curve of variables were submitted to both ANOVA and Tukey’s test at 5% significance. Treatments Azoxystrobin, Biofac and Picoxystrobin had higher photosynthetic rates than Control in the second period, with genotype Anta having higher rate than Santa Cruz. Biofac had higher transpiration rate than Control in the second period, while Biofac and Picoxystrobin had higher figures in Santa Cruz in the third period. Carbendazim had greater stomatal conductance in Anta, whilst Azoxystrobin, Biofac and Picoxystrobin had greater values than Carbendazim in Santa Cruz. Biofac and Picoxystrobin had greater intercellular CO2 concentration in Santa Cruz. Azoxystrobin and Picoxystrobin had greater instantaneous water use efficiency than Control, with Anta being more efficient than Santa Cruz. Biofac and Picoxystrobin had greater intrinsic water use efficiency in Anta, while Carbendazim increased efficiency in Santa Cruz. Azoxystrobin, Biofac and Picoxystrobin had greater carboxylation efficiency than Control in the second period, with Anta being more efficient than Santa Cruz. Azoxystrobin and Biofac had greater contents of chlorophylls a, b and a+b than Control in the second period. Azoxystrobin had greater effective quantum yield than Control and Picoxystrobin. All treatments faced increasing disease severity over time, with Anta being less resistant than Santa Cruz. As for production, data showed that: (1) Santa Cruz was more productive than Anta, having the greatest dry grain mass with Carbendazim, and (2) Anta’s lower disease severity did not translate into higher productions. In conclusion, strobilurins (Azoxystrobin and Picoxystrobin) and Biofac performed similarly as to their physiological effects on soybeans; however, these effects did not lead to increased dry grain mass by the end of the experiment.

Desempenho de sulcadores no desenvolvimento e produtividade da soja em solo submetido a diferentes níveis de compactação

On the national scene, soybean crop occupies a prominent position in cultivated area and volume production, being cultivated largely in the no tillage system. This system, due to the intense traffic of machines and implements on its surface has caused soil compaction problems, which has caused the yield loss of crops. In order to minimize this effect the seeder-drill uses the systems to opening the furrow by shank or the double disc type. The use of the shank has become commonplace for allowing the disruption of the compacted surface layer, however requires greater energy demand and may cause excessive tillage in areas where there is not observed high levels of compaction. Thus, this study aimed to evaluate the effects of furrowers mechanisms and levels of soil compacting on traction requirement by a seeder-drill and on the growing and productivity of soybean in an Oxisol texture clay, in a two growing seasons. The experimental design consisted of randomized blocks with split plots with the main plots composed of four levels of soil compaction (N0 – no tillage without additional compaction, N1, N2 and N3 – no tillage subjected to compaction through two, four and six passes with tractor, respectively) corresponding to densities of soil 1.16, 1.20, 1.22 and 1.26 g cm-3, and subplots by two furrowers mechanisms (shank and double disc) with four replicates. To evaluate the average, maximum and specific traction force requested by the seeder-drill, was used a load cell, with capacity of 50 kN and sensitivity of 2 mV V-1, coupled between the tractor and seeder-drill, whose data are stored in a datalogger system model CR800 of Campbell Scientific. In addition, were evaluated the bulk density, soil mechanical resistance to penetration, sowing depth, depth and groove width, soil area mobilized, emergence speed index, emergence operation, final plant stand, stem diameter, plant height, average number of seeds per pod, weight of 1,000 seeds, number of pods per plant and crop productivity. Data were subjected to analysis of variance, the mean of furrowers were compared by Tukey test (p≤0.05), while for the factor soil compaction, polynomial regression analysis was adopted, selected models by the criterion of greater R2 and significance (p≤0.05) of equation parameters. Regardless of the crop season, penetration resistance increase as soil compaction levels up to around 0.20 m deep, and bulk density influenced the sowing quality parameters, however, did not affect the crop yield. In the first season, there was a higher productivity with the use of the shank type. In the second crop season, the shank demanded greater energetic requirement with the increase of bulk density and opposite situation with the double disc. The locking of sowing lines allow better performance of the shank to break the compacted layer.

Desempenho de fosfitos de potássio no manejo de mofo branco em soja

Soybean plays an important role in the Brazilian agriculture being one of the products most exported by the country. Its yield may be affected by diseases such as white mold, caused by the fungus Sclerotinia sclerotiorum Lib. de Bary, which, under favorable field conditions prevents the crop of expressing all its productive potential. The fungus is cosmopolitan and infects more than 400 species of plants. This disease is difficult to control, and the use of chemicals has not been sufficient to avoid significant losses, thus, this products are expensive and may cause environmental damage. Alternative methods, such as foliar fertilizers based on potassium phosphite, can also be used in the management of this disease. In this context, this work aimed to study different sources of potassium phosphite and its effects in the control of white mold in soybeans, as well as the time of application in culture, its action in inducing plants defense responses and/or its influence over the seeds quality. The effect of phosphites, over the pathogen, was evaluated in vitro, on mycelial inhibition, the mass of dry mycelium and germination of sclerotia. In all tests, the following phosphites were utilized: Phosphite A (P2O5-40%; K2O-20% - 1 L/ha); Phosphite B (P2O5-40%; K2O-28% - 1 L/ha); Phosphite C (P2O5-40%; K2O-20% - 1 L/ha) e Phosphite D (P2O5-30%; K2O-20% - 2,4 L/ha). At the induction of resistance tests were evaluated the synthesis of phytoalexin in soybean cotyledons and the enzymes FAL and POX evaluated in seedlings in growing chamber, sprayed with phosphites and the fungicide fluazinam. Field experiment was carried out at Coronel Domingos Soares-PR, in the 2012/2013 season, in an area with natural infestation of the pathogen. Soybean cultivar BMX Active was no-till seeded with 0,5m between rows. The experimental was laid out as a factorial 5 x 4 scheme (treatment x application time). Phosphites sources were used, as described above, and water was sprayed in the control treatment. Treatments were applied at four different growth stages: V4, V4 + R1, R1 and R2 at the rates recommended by the manufacturer. Soybean yield components and seeds and health and physiological quality were evaluated after harvesting. None of the tested phosphites affected mycelial growth and sclerotia germination or influenced phytoalexin synthesis. Phosphites C and D stood out due to an increasing in the phenylalanine ammonia-lyase activity 48 hours after its inoculation. These same products also induced the synthesis and peroxidases and phosphite C kept the levels of this enzyme elevated up to 72 hours after inoculation. At the field trials, phosphites C and D stood out in the control of white mold. There was no significant interaction of potassium phosphite on physiological and sanitary quality of the seeds.

Estudo da síntese do biodiesel etílico utilizando misturas de óleos mamona/soja em diferentes proporções

No presente trabalho foi utilizado o processo de produção de biodiesel a partir da transesterificação de blendas de óleo de mamona e soja com etanol empregando-se como catalisador NaOH e posterior adição de H2SO4 para a neutralização do catalisador, visando a quebra de sabões e a melhor separação do biodiesel de seus co-produtos. Foi investigada a reação de transesterificação em blendas de óleo de mamona:soja nas proporções de 10:90, 20:80, 30:70, 40:60, 50:50, 60:40, 70:30, 80:20 e 90:10, sendo que as proporções que apresentaram melhores rendimentos foram 30:70, 60:40 e 80:20. O biodiesel obtido das blendas como melhor rendimento foram submetidos a medições viscosimétricas, sendo a proporção 30:70 a que apresentou a viscosidade mais próxima à especificada pela ANP (6,12 mm2 /s). O biodiesel etílico produzido com a blenda 30:70 obtido na transesterificação foi submetido a esterificação para diminuir o índice de acidez, utilizando H2SO4 como catalisador em concentrações de 5% e 10% em relação a massa de ácidos graxos livres, com álcool etílico numa razão molar de 60:1 e 80:1 álcool:ácido graxo. Para a reação de transesterificação, também foi estudada, a influência da concentração do catalisador no rendimento de biodiesel etílico e na formação de sabão. A quantidade de sabão formado no processo variou de 5,70% a 9,54% para 1% a 2% de catalisador, respectivamente.

Síntese e caracterização de biodiesel metílico e etílico a partir de blendas dos óleos de tungue e de soja

No presente trabalho foi investigada a transesterificação de blendas dos óleos de soja e de tungue com metanol ou etanol empregando catalisador alcalino (NaOH ou KOH). Foi investigado o tempo reacional, a proporção da blenda, a concentração e o tipo de catalisador, tipo de álcool e razão molar, temperatura e metodologia empregada no tratamento da reação. Nas reações com metanol obtiveram-se melhores conversões com tempo reacional de 1,5h; temperatura de 60°C; proporção blenda dos óleos de soja e de tungue de 90:10 (m/m); concentração de NaOH de 0,5% em relação a massa da blenda e razão molar metanol:blenda de 6:1. O tratamento dos ésteres metílicos produzidos na reação foi realizado por lavagem com água a 60°C após o processo de decantação das fases, metodologia C. O rendimento de ésteres metílicos foi superior a 96% e, o teor de mono-, di- e triacilglicerídeos, glicerol livre e total ficou abaixo dos limites estabelecidos pela ANP, indicando boa conversão (> 96,5%). Nas reações com etanol verificou-se que as melhores condições reacionais foram com uma concentração de catalisador de 0,8% de NaOH em relação a massa da blenda, razão molar etanol:blenda de 9:1, tempo de 1,5h e temperatura de 60°C. O tratamento dos produtos da reação foi realizado por lavagem com água a 60°C após o processo de remoção do etanol e decantação das fases, metodologia D. A concentração do catalisador foi um fator determinante na separação das fases. Uma maior concentração de catalisador favorece a saponificação, dificultando a separação das fases e afetando o rendimento do biodiesel sintetizado, tanto para o metílico quanto o etílico. O índice de acidez, tanto para o biodiesel metílico como o etílico, para qualquer proporção da blenda dos óleos de soja e tungue, ficaram dentro das normas da ANP, com valores abaixo de 0,5 mg.g-1 de KOH.

Síntese, caracterização e aplicação de LaSBA-15 e como catalisador para obtenção de biodiesel de soja via rota etílica

Biodiesel is an alternative fuel, renewable, biodegradable and nontoxic. The transesterification of vegetable oils or animal fat with alcohol is most common form of production of this fuel. The procedure for production of biodiesel occurs most commonly through the transesterification reaction in which catalysts are used to accelerate and increase their income and may be basic, acid or enzyme. The use of homogeneous catalysis requires specific conditions and purification steps of the reaction products (alkyl ester and glycerol) and removal of the catalyst at the end of the reaction. As an alternative to improve the yield of the transesterification reaction, minimize the cost of production is that many studies are being conducted with the application of heterogeneous catalysis. The use of nano-structured materials as catalysts in the production of biodiesel is a biofuel alternative for a similar to mineral diesel. Although slower, can esterify transesterified triglycerides and free fatty acids and suffer little influence of water, which may be present in the raw material. This study aimed at the synthesis, characterization and application of nano-structured materials as catalysts in the transesterification reaction of soybean oil to produce biodiesel by ethylic route. The type material containing SBA-15 mesoporous lanthanum embedded within rightly Si / La = 50 was used catalyst. Solid samples were characterized by X-ray diffraction, thermogravimetric analysis, infrared spectroscopy, nitrogen adsorption and desorption. For the transesterification process, we used a molar ratio of 20:1 alcohol and oil with 0.250 g of catalyst at 60°C and times of 6 hours of reaction. It was determined the content of ethyl esters by H-NMR analysis and gas chromatography. It was found that the variable of conversion obtained was 80%, showing a good catalytic activity LaSBA-15 in the transesterification of vegetable oils via ethylic route

Parâmetros genéticos e obtenção de genótipos de soja com ausência de lipoxigenase e características agronômicas em baixas latitudes

Tese (doutorado)—Universidade de Brasília, Faculdade de Agronomia e Medicina Veterinária, Programa de Pós-Graduação em Agronomia, 2016.

VULNERABILIDADE AGRÍCOLA DA PRODUÇÃO DE SOJA NA REGIÃO METROPOLITANA DE LONDRINA – PR: ANALISE DA SAFRA DE 2005/06

A produção de soja na região norte do estado do Paraná é responsável por contribuir imensurávelmente com a balança comercial do estado do Paraná, sabe-se que a soja possue um papel fundamental na economia agrícola da região norte do estado do Paraná onde se localizam as cidades de Cambé, Ibiporã, Londrina, Rolândia e Tamarana. O clima não é somente uma variável que marca o ritmo das estações do ano, é um fenômeno natural produzido pelo sistema Sol-Atmosfera-Terra, e exerce grande influência nas atividades humanas. Na agricultura, o clima pode ser aliado ou inimigo no plantio, no desenvolvimento, na produção e no rendimento final de grãos. Dessa forma, ao enfocar a soja como cultura líder na balança comercial brasileira, deve-se levar em consideração sua fisiologia que a define sendo uma cultura de verão, justamente pelo fato de germinar apenas com temperaturas superiores a 13º C. Para analisar possíveis interferências pluviométricas na cultura da soja, foram coletados dados de precipitação pluviométrica e de rendimento de soja das safras de 2005/06, 2006/07, 2007/08, 2008/09 e 2009/10. Os mapas cartográficos foram desenvolvidos segundo tais dados e contrapostos com o intuito de favorecer a análise dos resultados obtidos. Neste artigo, foram feitas analises especificamente das safras de 2005/06, sendo uma contribuição preliminar. O município de Londrina, tanto pela sua área territorial, quanto pelos investimentos no setor agrícola, destaca-se na produção de soja, exceto na safra de 2005/06, cujo rendimento final do grão foi inferior ao do município de Cambé. A precipitação média do mês de janeiro para o município de Londrina apresenta-se com média mensal de 76 mm, isso pode ser justificado pela ocorrência de um período de estiagem em janeiro de 2006 que afetou o município de Londrina, contribuindo com uma redução considerável no rendimento final da soja para o município.

Modelo de programação quadrática para análise da movimentação logística e comercialização da soja brasileira

The purpose of this work was to analyze the logistical distribution of Brazilian soybean by applying a quadratic programming to a spatial equilibrium model. The soybean transportation system is an important part of the soybean complex in Brazil, since the major part of the costs of this commodity derives from the transportation costs. Therefore, the optimization of this part of the process is essential to a better competitiveness of the Brazilian soybean in the international market. The Brazilian soybean complex have been increasing its agricultural share in the total of the exportation value in the last ten years, but due to other countries' investments the Brazilian exportations cannot be only focused on increasing its production but it still have to be more efficient. This way, a model was reached which can project new frames by switching the transportation costs and conduce the policy makers to new investments in the sector.