The complex angular momentum theory of the production of three particles in collisions of two strongly interacting particles at high energy

The problem of the continuation to complex values of the angular momentum of the partial wave amplitude is examined for the simplest production process, that of two particles → three particles. The presence of so-called "anomalous singularities" complicates the procedure followed relative to that used for quasi two-body scattering amplitudes. The anomalous singularities are shown to lead to exchange degenerate amplitudes with possible poles in much the same way as "normal" singularities lead to the usual signatured amplitudes. The resulting exchange-degenerate trajectories would also be expected to occur in two-body amplitudes.

The representation of the production amplitude in terms of the singularities of the partial wave amplitude is then developed and applied to the high energy region, with attention being paid to the emergence of "double Regge" terms. Certain new results are obtained for the behavior of the amplitude at zero momentum transfer, and some predictions of polarization and minima in momentum transfer distributions are made. A calculation of the polarization of the ρ^o meson in the reaction π ^- p → π ^- ρ^op at high energy with small momentum transfer to the proton is compared with data taken at 25 Gev by W. D. Walker and collaborators. The result is favorable, although limited by the statistics of the available data.

Small scale turbulence in high Karlovitz number premixed flames

The purpose of this thesis is to characterize the behavior of the smallest turbulent scales in high Karlovitz number (Ka) premixed flames. These scales are particularly important in the two-way coupling between turbulence and chemistry and better understanding of these scales will support future modeling efforts using large eddy simulations (LES). The smallest turbulent scales are studied by considering the vorticity vector, ω, and its transport equation.

Due to the complexity of turbulent combustion introduced by the wide range of length and time scales, the two-dimensional vortex-flame interaction is first studied as a simplified test case. Numerical and analytical techniques are used to discern the dominate transport terms and their effects on vorticity based on the initial size and strength of the vortex. This description of the effects of the flame on a vortex provides a foundation for investigating vorticity in turbulent combustion.

Subsequently, enstrophy, ω² = ω • ω, and its transport equation are investigated in premixed turbulent combustion. For this purpose, a series of direct numerical simulations (DNS) of premixed n-heptane/air flames are performed, the conditions of which span a wide range of unburnt Karlovitz numbers and turbulent Reynolds numbers. Theoretical scaling analysis along with the DNS results support that, at high Karlovitz number, enstrophy transport is controlled by the viscous dissipation and vortex stretching/production terms. As a result, vorticity scales throughout the flame with the inverse of the Kolmogorov time scale, τ_η, just as in homogeneous isotropic turbulence. As τ_η is only a function of the viscosity and dissipation rate, this supports the validity of Kolmogorov’s first similarity hypothesis for sufficiently high Ka numbers (Ka ≳ 100). These conclusions are in contrast to low Karlovitz number behavior, where dilatation and baroclinic torque have a significant impact on vorticity within the flame. Results are unaffected by the transport model, chemical model, turbulent Reynolds number, and lastly the physical configuration.

Next, the isotropy of vorticity is assessed. It is found that given a sufficiently large value of the Karlovitz number (Ka ≳ 100) the vorticity is isotropic. At lower Karlovitz numbers, anisotropy develops due to the effects of the flame on the vortex stretching/production term. In this case, the local dynamics of vorticity in the strain-rate tensor, S, eigenframe are altered by the flame. At sufficiently high Karlovitz numbers, the dynamics of vorticity in this eigenframe resemble that of homogeneous isotropic turbulence.

Combined, the results of this thesis support that both the magnitude and orientation of vorticity resemble the behavior of homogeneous isotropic turbulence, given a sufficiently high Karlovitz number (Ka ≳ 100). This supports the validity of Kolmogorov’s first similarity hypothesis and the hypothesis of local isotropy under these condition. However, dramatically different behavior is found at lower Karlovitz numbers. These conclusions provides/suggests directions for modeling high Karlovitz number premixed flames using LES. With more accurate models, the design of aircraft combustors and other combustion based devices may better mitigate the detrimental effects of combustion, from reducing CO₂ and soot production to increasing engine efficiency.

Production of positive controls for calcivirus-specific PCR using recombinant baculiovirus technology

Recent advances in our knowledge of the genetic structure of human caliciviruses (HuCVs) and small round-structured viruses (SRSVs) have led to the development of polymerase chain reaction (PCR)-based molecular tests specific for these viruses. These methods have been developed to detect a number of human pathogenic viruses in environmental samples including water, sewage and shellfish. HuCVs and SRSVs are not culturable, and no animal model is currently available. Therefore there is no convenient method of preparing viruses for study or for reagent production. One problem facing those attempting to use PCR-based methods for the detection of HuCVs and SRSVs is the lack of a suitable positive control substrate. This is particularly important when screening complex samples in which the levels of inhibitors present may significantly interfere with amplificiation. Regions within the RNA polymerase regions of two genetically distinct human caliciviruses have been amplified and used to produce recombinant baculoviruses which express RNA corresponding to the calicivirus polymerase. This RNA is being investigated as a positive control substrate for PCR testing, using current diagnostic primer sets. Recombinant baculovirus technology will enable efficient and cost-effective production of large quantities of positive control RNA with a specific known genotype. We consider the development of these systems as essential for successful screening and monitoring applications.

Advanced Reaction Systems for Hydrogen Production

[EN] This PhD work started in March 2010 with the support of the University of the Basque Country (UPV/EHU) under the program named “Formación de Personal Investigador” at the Chemical and Environmental Engineering Department in the Faculty of Engineering of Bilbao. The major part of the Thesis work was carried out in the mentioned department, as a member of the Sustainable Process Engineering (SuPrEn) research group. In addition, this PhD Thesis includes the research work developed during a period of 6 months at the Institut für Mikrotechnik Mainz GmbH, IMM, in Germany. During the four years of the Thesis, conventional and microreactor systems were tested for several feedstocks renewable and non-renewable, gases and liquids through several reforming processes in order to produce hydrogen. For this purpose, new catalytic formulations which showed high activity, selectivity and stability were design. As a consequence, the PhD work performed allowed the publication of seven scientific articles in peer-reviewed journals. This PhD Thesis is divided into the following six chapters described below. The opportunity of this work is established on the basis of the transition period needed for moving from a petroleum based energy system to a renewable based new one. Consequently, the present global energy scenario was detailed in Chapter 1, and the role of hydrogen as a real alternative in the future energy system was justified based on several outlooks. Therefore, renewable and non-renewable hydrogen production routes were presented, explaining the corresponding benefits and drawbacks. Then, the raw materials used in this Thesis work were described and the most important issues regarding the processes and the characteristics of the catalytic formulations were explained. The introduction chapter finishes by introducing the concepts of decentralized production and process intensification with the use of microreactors. In addition, a small description of these innovative reaction systems and the benefits that entailed their use were also mentioned. In Chapter 2 the main objectives of this Thesis work are summarized. The development of advanced reaction systems for hydrogen rich mixtures production is the main objective. In addition, the use and comparison between two different reaction systems, (fixed bed reactor (FBR) and microreactor), the processing of renewable raw materials, the development of new, active, selective and stable catalytic formulations, and the optimization of the operating conditions were also established as additional partial objectives. Methane and natural gas (NG) steam reforming experimental results obtained when operated with microreactor and FBR systems are presented in Chapter 3. For these experiments nickel-based (Ni/Al2O3 and Ni/MgO) and noble metal-based (Pd/Al2O3 and Pt/Al2O3) catalysts were prepared by wet impregnation and their catalytic activity was measured at several temperatures, from 973 to 1073 K, different S/C ratios, from 1.0 to 2.0, and atmospheric pressure. The Weight Hourly Space Velocity (WHSV) was maintained constant in order to compare the catalytic activity in both reaction systems. The results obtained showed a better performance of the catalysts operating in microreactors. The Ni/MgO catalyst reached the highest hydrogen production yield at 1073 K and steam-to-carbon ratio (S/C) of 1.5 under Steam methane Reforming (SMR) conditions. In addition, this catalyst also showed good activity and stability under NG reforming at S/C=1.0 and 2.0. The Ni/Al2O3 catalyst also showed high activity and good stability and it was the catalyst reaching the highest methane conversion (72.9 %) and H2out/CH4in ratio (2.4) under SMR conditions at 1073 K and S/C=1.0. However, this catalyst suffered from deactivation when it was tested under NG reforming conditions. Regarding the activity measurements carried out with the noble metal-based catalysts in the microreactor systems, they suffered a very quick deactivation, probably because of the effects attributed to carbon deposition, which was detected by Scanning Electron Microscope (SEM). When the FBR was used no catalytic activity was measured with the catalysts under investigation, probably because they were operated at the same WHSV than the microreactors and these WHSVs were too high for FBR system. In Chapter 4 biogas reforming processes were studied. This chapter starts with an introduction explaining the properties of the biogas and the main production routes. Then, the experimental procedure carried out is detailed giving concrete information about the experimental set-up, defining the parameters measured, specifying the characteristics of the reactors used and describing the characterization techniques utilized. Each following section describes the results obtained from activity testing with the different catalysts prepared, which is subsequently summarized: Section 4.3: Biogas reforming processes using γ-Al2O3 based catalysts The activity results obtained by several Ni-based catalysts and a bimetallic Rh-Ni catalyst supported on magnesia or alumina modified with oxides like CeO2 and ZrO2 are presented in this section. In addition, an alumina-based commercial catalyst was tested in order to compare the activity results measured. Four different biogas reforming processes were studied using a FBR: dry reforming (DR), biogas steam reforming (BSR), biogas oxidative reforming (BOR) and tri-reforming (TR). For the BSR process different steam to carbon ratios (S/C) from 1.0 to 3.0, were tested. In the case of BOR process the oxygen-to-methane (O2/CH4) ratio was varied from 0.125 to 0.50. Finally, for TR processes different S/C ratios from 1.0 to 3.0, and O2/CH4 ratios of 0.25 and 0.50 were studied. Then, the catalysts which achieved high activity and stability were impregnated in a microreactor to explore the viability of process intensification. The operation with microreactors was carried out under the best experimental conditions measured in the FBR. In addition, the physicochemical characterization of the fresh and spent catalysts was carried out by Inductively Coupled Plasma Atomic Emission Spectroscopy (ICP-AES), N2 physisorption, H2 chemisorption, Temperature Programmed Reduction (TPR), SEM, X-ray Photoelectron Spectroscopy (XPS) and X-ray powder Diffraction (XRD). Operating with the FBR, conversions close to the ones predicted by thermodynamic calculations were obtained by most of the catalysts tested. The Rh-Ni/Ce-Al2O3 catalyst obtained the highest hydrogen production yield in DR. In BSR process, the Ni/Ce-Al2O3 catalyst achieved the best activity results operating at S/C=1.0. In the case of BOR process, the Ni/Ce-Zr-Al2O3 catalyst showed the highest reactants conversion values operating at O2/CH4=0.25. Finally, in the TR process the Rh-Ni/Ce-Al2O3 catalyst obtained the best results operating at S/C=1.0 and O2/CH4=0.25. Therefore, these three catalysts were selected to be coated onto microchannels in order to test its performance under BOR and TR processes conditions. Although the operation using microreactors was carried out under considerably higher WHSV, similar conversions and yields as the ones measured in FBR were measured. Furthermore, attending to other measurements like Turnover Frequency (TOF) and Hydrogen Productivity (PROD), the values calculated for the catalysts tested in microreactors were one order of magnitude higher. Thus, due to the low dispersion degree measured by H2-chemisorption, the Ni/Ce-Al2O3 catalyst reached the highest TOF and PROD values. Section 4.4: Biogas reforming processes using Zeolites L based catalysts In this section three type of L zeolites, with different morphology and size, were synthesized and used as catalyst support. Then, for each type of L zeolite three nickel monometallic and their homologous Rh-Ni bimetallic catalysts were prepared by the wetness impregnation method. These catalysts were tested using the FBR under DR process and different conditions of BSR (S/C ratio of 1.0 and 2.0), BOR (O2/CH4 ratio of 0.25 and 0.50) and TR processes (at S/C=1.0 and O2/CH4=0.25). The characterization of these catalysts was also carried out by using the same techniques mentioned in the previous section. Very high methane and carbon dioxide conversion values were measured for almost all the catalysts under investigation. The experimental results evidenced the better catalytic behavior of the bimetallic catalysts as compared to the monometallic ones. Comparing the catalysts behavior with regards to their morphology, for the BSR process the Disc catalysts were the most active ones at the lowest S/C ratio tested. On the contrary, the Cylindrical (30–60 nm) catalysts were more active under BOR conditions at O2/CH4=0.25 and TR processes. By the contrary, the Cylindrical (1–3 µm) catalysts showed the worst activity results for both processes. Section 4.5: Biogas reforming processes using Na+ and Cs+ doped Zeolites LTL based catalysts A method for the synthesis of Linde Type L (LTL) zeolite under microwave-assisted hydrothermal conditions and its behavior as a support for heterogeneously catalyzed hydrogen production is described in this section. Then, rhodium and nickel-based bimetallic catalysts were prepared in order to be tested by DR process and BOR process at O2/CH4=0.25. Moreover, the characterization of the catalysts under investigation was also carried out. Higher activities were achieved by the catalysts prepared from the non-doped zeolites, Rh-Ni/D and Rh-Ni/N, as compared to the ones supported on Na+ and Cs+ exchanged supports. However, the differences between them were not very significant. In addition, the Na+ and Cs+ incorporation affected mainly to the Disc catalysts. Comparing the results obtained by these catalysts with the ones studied in the section 4.4, in general worst results were achieved under DR conditions and almost the same results when operated under BOR conditions. In Chapter 5 the ethylene glycol (EG) as feed for syngas production by steam reforming (SR) and oxidative steam reforming (OSR) was studied by using microchannel reactors. The product composition was determined at a S/C of 4.0, reaction temperatures between 625°C and 725°C, atmospheric pressure and Volume Hourly Space Velocities (VHSV) between 100 and 300 NL/(gcath). This work was divided in two sections. The first one corresponds to the introduction of the main and most promising EG production routes. Then, the new experimental procedure is detailed and the information about the experimental set-up and the measured parameters is described. The characterization was carried out using the same techniques as for the previous chapter. Then, the next sections correspond to the catalytic activity and catalysts characterization results. Section 5.3: xRh-cm and xRh-np catalysts for ethylene glycol reforming Initially, catalysts with different rhodium loading, from 1.0 to 5.0 wt. %, and supported on α-Al2O3 were prepared by two different preparation methods (conventional impregnation and separate nanoparticle synthesis). Then, the catalysts were compared regarding their measured activity and selectivity, as well as the characterization results obtained before and after the activity tests carried out. The samples prepared by a conventional impregnation method showed generally higher activity compared to catalysts prepared from Rh nanoparticles. By-product formation of species such as acetaldehyde, ethane and ethylene was detected, regardless if oxygen was added to the feed or not. Among the catalysts tested, the 2.5Rh-cm catalyst was considered the best one. Section 5.4: 2.5Rh-cm catalyst support modification with CeO2 and La2O3 In this part of the Chapter 5, the catalyst showing the best performance in the previous section, the 2.5Rh-Al2O3 catalyst, was selected in order to be improved. Therefore, new Rh based catalysts were designed using α-Al2O3 and being modified this support with different contents of CeO2 or La2O3 oxides. All the catalysts containing additives showed complete conversion and selectivities close to the equilibrium in both SR and OSR processes. In addition, for these catalysts the concentrations measured for the C2H4, CH4, CH3CHO and C2H6 by-products were very low. Finally, the 2.5Rh-20Ce catalyst was selected according to its catalytic activity and characterization results in order to run a stability test, which lasted more than 115 hours under stable operation. The last chapter, Chapter 6, summarizes the main conclusions achieved throughout this Thesis work. Although very high reactant conversions and rich hydrogen mixtures were obtained using a fixed bed reaction system, the use of microreactors improves the key issues, heat and mass transfer limitations, through which the reforming reactions are intensified. Therefore, they seem to be a very interesting and promising alternative for process intensification and decentralized production for remote application.

Um turismo de base comunitária para o Parque Nacional do Itatiaia: estudo sobre conflito socioambiental em unidade de conservação.

O Parque Nacional do Itatiaia, fundado em 1937, é o primeiro Parque Nacional do Brasil e apresenta dois planos distintos em seus espaços Parte Alta e Parte Baixa compreendendo municípios dos estados do Rio de Janeiro e Minas Gerais. O estudo do conflito socioambiental existente no Parque Nacional do Itatiaia (PNI) foi realizado, nesta tese, a partir do processo de ampliação territorial ocorrido nesta Unidade de Conservação, em 1982, que incorporou pequenas propriedades particulares ao território da Parte Alta do PNI sem que o Estado efetivasse as indenizações e as desapropriações territoriais preconizadas pela legislação ambiental brasileira para unidades de conservação de proteção integral (SNUC Lei Federal n. 9.985/2000). A caracterização do PNI foi feita levando-se em consideração as correntes ambientalistas que fundamentaram a criação de áreas protegidas desde o surgimento da primeira unidade de conservação nos Estados Unidos da América, no séc. XIX. As assimetrias identificadas nas relações de poder estabelecidas pelos atores sociais envolvidos na questão fundiária do PNI foram destacadas com base nas contribuições do campo da ecologia política. Nessa perspectiva, o estudo caracterizou a relação das comunidades tradicionais com o meio ambiente e as práticas socioambientais dela decorrentes e identificou alternativas de sustentabilidade socioambiental para enfrentamento dos conflitos fundiários existentes no PNI. A possibilidade de desenvolvimento de práticas produtivas alternativas à agropecuária, como o turismo de base comunitária, por exemplo, que permite a inclusão das famílias residentes no território do PNI até que se conclua o processo de regularização fundiária e a sua consolidação territorial, foi ressaltada com vistas a apontar a construção de um arranjo institucional como estratégia de compatibilização de dois direitos fundamentais garantidos pela Constituição Federal de 1988 (CF/88): o direito ao meio ambiente equilibrado e o direito cultural. Nesse parque, a atividade turística manifesta-se como uma das alternativas viáveis para o enfrentamento dos conflitos sobre a ocupação fundiária, tendo em vista que políticas públicas de turismo têm concebido ações de geração de trabalho e renda, de inclusão social e de sustentabilidade econômica e ambiental. A adoção da metodologia de pesquisa qualitativa, com base na técnica de observação participante, permitiu a imersão do pesquisador na problemática vivenciada por comunidades tradicionais que vivem em UCs e possibilitou a obtenção de dados singulares que auxiliaram na interpretação dos resultados. A partir das análises empreendidas com base no trabalho de campo e nas entrevistas, esta tese reforça a importância da celebração de um arranjo institucional entre o Estado brasileiro, por meio do órgão ambiental, e as famílias residentes nas comunidades da Serra Negra e da Vargem Grande, dentro dos limites territoriais do PNI, como forma de se criar uma alternativa sustentável aos impasses vivenciados pelo Estado brasileiro frente às reivindicações de grupos sociais envolvidos em conflitos socioambientais, não só no PNI, mas em diversas Unidades de Conservação do Brasil.

Small scale rural aquaculture in Assam, India: a case study

The state of Assam in northeastern India has an excellent sub-tropical climate for the development of fresh water fish culture in a variety of aquatic bodies. Aquaculture not only plays an important role in nutrition but also in the rural economy of the State. A pilot project conducted with a group of resource poor tribal farmers revealed that a production of about 1 800 kg/ha/yr could be achieved from small seasonal homestead ponds through integrated use of locally available biological resources. This implies an excellent opportunity for improving the rural economy through the development of small-scale fish culture enterprises. In this project, a greater emphasis was placed on improving the knowledge and skills of the farmers and their farming practices so that in the future they would be in a position to expand their activities with financial assistance made available locally. Aquaculture being a new activity in the area, this pilot project was only a start in acquainting the farmers with the practice and potential of aquaculture.

Markets, marketing and production issues for aquaculture in East Africa: the case of Uganda

Aquaculture is currently responsible for an insignificant proportion of total fish production in Uganda. However, given the increasing demand for fresh fish in urban and peri-urban araes, and threats to the supply of fish from natural catch fisheries, the potential exists for a strong market in aquaculture. Small-scale fish farmers located relatively close to markets or all-season roads, and who can supply consistent and high quality produce, will have the widest range of marketing opportunities, and will likely be within the area of operation of potential traders and intermediaries that deliver fish to markets. Fish farmers that are not close to roads, or produce unreliable quantities and variable quality products may face high transaction costs of marketing their product, and decreasing net returns to production. The authors found that significant on-farm labor, and access to input markets are important factors leading to positive net returns to fish production. Areas with high population density and relatively low wages will be well suited to labor intensive aquaculture. The authors concluded that aquaculture development has good potential in certain areas of Uganda and should therefore be pursued as a potential development pathway. However, policy makers should consider the importance of the price of fresh fish relative to the cost of labor, as well as other factors including the importance of smallholder credit and access to extension services, when directing investments in aquaculture technology.

A preliminary study on the feasibility of using fenced brushparks for fish production in Lake Chilwa, Malawi

A study to investigate the feasibility of using fenced brushparks for fish ranching in Lake Chilwa was conducted for five months at the Kachulu Harbor. In a water depth of 1.4 m enclosures constructed from bamboo sticks embedded in the sediment and surrounded by a 13 mm seine net, were filled with three different subrates (Typha, bamboo, and Sesbania branches) and a no substrate enclosure served as a control. Netting materials contributed 57 per cent towards the total cost (US$ 0.24-0.30/m2) of brushpark contruction. Fish productivity was highest in the Typha, bamboo and control treatments and lowest in the Sesbania treatments. The decomposition of substrates did not affect water quality. The results indicate that enclosed brushparks may be a feasible technology for enhancing fish yields and providing alternative income sources to fisherfolk in small lakes and water bodies.

Production of freshwater prawns in the Mekong Delta

Currently there are 2 sources of freshwater prawn Macrobrachium rosenbergii production in Vietnam - natural production from the rivers and canals and aquaculture production from ponds and ricefields. An account is given of the production of this prawn in the Mekong Delta. The prawns are harvested primarily by a common small scale method using shelter traps. The total annual freshwater prawn production in Vietnam during 1985-90 was reported to vary from 5000 to 8000 tons, most of it from natural fisheries; although there are no official statistics on the production of farmed prawns, the amount is believed to be very small. The grow-out system includes intensive monospecies pond culture, and semi-intensive or extensive integrated rice-prawn or vegetable-prawn culture.

The role of small indigenous fish species in food and nutrition security in Bangladesh

In Bangladesh, only 6% of the daily food intake is animal food of which fish accounts for 50%. Rice is the mainstay, making up 60% of the daily food intake. However, many nutrients such as vitamins A and C, iron, calcium, zinc and iodine are not found in rice and have to be obtained from other sources. Small indigenous fish are a vital contribution to the diet of the rural poor in Bangladesh, where more than 30,000 children go blind every year from vitamin A deficiency and 70% of women and children are iron-deficient. Small fish, which are less than 10 cm in length and usually eaten whole with the organs and bones, contain large amount of calcium and possibly iron and zinc. The largest fish promoted in aquaculture do not contribute significantly to calcium intake. Some species also contain large amount of vitamin A. Much of the small indigenous fish (SIS) of Bangladesh are caught in floodplains and natural waterbodies. Small fish are eaten frequently in small amounts and are more equally distributed among family members than big fish of which men get the larger share. Unfortunately, overfishing and the deterioration of natural habitats have resulted in a decline in SIS. When measures are taken to improve food and nutrition security, there should be a focus on production of small fish so that greater quantities are accessible for consumption by the rural poor.

Simple method for backyard production of snakehead (Channa striata Bloch) fry

The snakehead (Channa striata ) is a common freshwater fish species in Malaysia. Details are given of a simple technique for breeding this species, suitable for small-scale farmers practising backyard aquaculture. Two techniques were used to induce spawning - the first used water level manipulation to simulate rain and the second used injected with human chorionic gonadotropic hormone. The former, more natural, spawning technique was found to provide a viable alternative for the small-scale farmer, being much simpler than hormone injection.

Small-scale Commercial Culturing of Northern Bay Scallops, Argopecten irradians irradians, in Atlantic United States and Canada

In recent decades, hatchery-growout culture of oysters, Crassostrea virginica, and northern quahogs, Mercenaria mercenaria, has been commercially successful in Atlantic United States and oysters in Atlantic Canada. Culturists have not had success, as yet, with northern bay scallops, Argopecten irradians irradians. Large mortalities occur during the culture process, mainly because the scallops are relatively delicate and some die when handled. In addition, too little edible meat, i.e. the adductor muscle, is produced for the culture operation to be profitable. However, three companies, one in Massachusetts, one in New Brunswick, and one on Prince Edward Island, Canada, have discovered that they can produce bay scallops successfully by harvesting them when partially-to fully-grown and selling them whole. In restaurants, the scallops are cooked and served with all their meats (adductor muscles and rims) and also with the shells, which have been genetically-bred for bright colors. The scallop seed are produced in hatcheries and then grown in lantern or pearl nets and cages to market size. Thus far, production has been relatively small, just beyond the pilot-scale, until a larger demand develops for this product.

A Review of the South Pacific Tuna Baitfisheries: Small Pelagic Fisheries Associated with Coral-Reefs

A review is given of current information concerning small pelagic fishes exploited for tuna bait in the South Pacific. These fishes are usually caught over or near coral reefs using light attraction and lift nets. The most common and widespread species are anchovies (Engraulidae), sprats (Clupeidae), silversides (Atherinidae), and herrings (Clupeidae). Recorded yields ranged from 0.5 to 2.6t/km2, and methods are described to estimate potential yields empirically in the absence of catch data. Environmental effects on small pelagic fish production are discussed, and evidence is presented to suggest that rainfall markedly affects stolephorid anchovy production. Some species of small pelagic fish, such as Selar spp., Decapterus spp., and Herklotsichthys sp., have been fished traditionally by artisanal fishermen, but anchovy and sprat stocks were probably unexploited prior to pole-and-line tuna fishing in the South Pacific.

Small-scale aquaculture for rural livelihoods: Proceedings of the Symposium on Small-scale aquaculture for increasing resilience of Rural Livelihoods in Nepal. 5-6 Feb 2009. Kathmandu, Nepal

Over the years, aquaculture has developed as one of the fastest growing food production sectors in Nepal. However, local fish supplies have been extremely inadequate to meet the ever increasing demand in the country. Nepal imports substantial quantities of fish and fish products from India, Bangladesh, Thailand, and elsewhere. Integration of pond aquaculture in existing crop-livestock-based farming system is believed to be effective in increasing local fish supply and diversifying livelihood options of a large number of small-holder farmers in southern plains (terai) and mid-hill valleys, thereby also increasing resilience of rural livelihoods. There is growing appreciation of the role of small-scale aquaculture in household food and nutrition security, income generation, and empowerment of women and marginalized communities. This book includes a total of 25 papers presented at the ‘Symposium on Small-scale Aquaculture for Increasing Resilience of Rural Livelihoods in Nepal’, held in Kathmandu on 5-6 February 2009. The papers cover technological, social, economic and environmental aspects of small-scale aquaculture development emerged from research and development initiatives of governmental, non-governmental and international research organizations in recent decad

Determinants of small-scale fishermen's income on Oman's Batinah Coast

The small-scale fishing industry of Oman is responsible for almost 90 percent of the total marine fishery production. It is also the main supplier of fish for Omani households. This study analyzes the factors that determine small-scale fishermen’s income on Oman’s Batinah Coast, which has almost 30 percent of Oman’s population and more than one-third of the small-scale fishermen. We find that fishermen’s income here can be explained broadly under four major blocks of variables: geographical region, fishing inputs and catch, socioeconomic and demographic characteristics, and the nature of the relationship with fisheries extension services. In general, the Wilayat (local administrative units) failed to make any significant impact on fishermen’s income. The variable “Fishing inputs and catch,” such as increases in engine power, boat length, weekly catch, and number of weekly trips, positively impacted fishermen’s income while increases in weekly fishing costs, number of crew members, and difficulty in getting ice had a significantly negative effect on the income. Furthermore, socioeconomic and demographic characteristics also contributed significantly in determining the fishermen’s income level. The other important findings were related to extension services. The variables “Fishermen’s exchange of information and cooperation with the ministry” and “Fishermen’s involvement in the extension activities” were found to have positive effects on fishermen’s income levels. Capitalizing on these findings could improve fishermen’s incomes and their lives across the region, as well as nationally.