Outcome analysis of intracorneal ring segments for the treatment of keratoconus based on visual, refractive, and aberrometric impairment

PURPOSE: To analyze the outcomes of intracorneal ring segment (ICRS) implantation for the treatment of keratoconus based on preoperative visual impairment. DESIGN: Multicenter, retrospective, nonrandomized study. METHODS: A total of 611 eyes of 361 keratoconic patients were evaluated. Subjects were classified according to their preoperative corrected distance visual acuity (CDVA) into 5 different groups: grade I, CDVA of 0.90 or better; grade II, CDVA equal to or better than 0.60 and worse than 0.90; grade III, CDVA equal to or better than 0.40 and worse than 0.60; grade IV, CDVA equal to or better than 0.20 and worse than 0.40; and grade plus, CDVA worse than 0.20. Success and failure indices were defined based on visual, refractive, corneal topographic, and aberrometric data and evaluated in each group 6 months after ICRS implantation. RESULTS: Significant improvement after the procedure was observed regarding uncorrected distance visual acuity in all grades (P < .05). CDVA significantly decreased in grade I (P < .01) but significantly increased in all other grades (P < .05). A total of 37.9% of patients with preoperative CDVA 0.6 or better gained 1 or more lines of CDVA, whereas 82.8% of patients with preoperative CDVA 0.4 or worse gained 1 or more lines of CDVA (P < .01). Spherical equivalent and keratometry readings showed a significant reduction in all grades (P ≤ .02). Corneal higher-order aberrations did not change after the procedure (P ≥ .05). CONCLUSIONS: Based on preoperative visual impairment, ICRS implantation provides significantly better results in patients with a severe form of the disease. A notable loss of CDVA lines can be expected in patients with a milder form of keratoconus.

Intrastromal corneal ring segments: how successful is the surgical treatment of keratoconus?

This review evaluates the outcomes of intrastromal corneal ring segment (ICRS) implantation for the treatment of keratoconus considering a new grading system based on the preoperative visual impairment of the patient. Additionally, a five-year follow-up analysis of patients with stable and progressive keratoconus is performed in order to assess the long term stability of the surgical procedure. Corrected distance visual acuity decreased statistically significantly in patients with mild keratoconus (P < 0.01) but statistically significantly increased in all other grades (P < 0.05). The improvement in visual acuity and the decrease of keratometric and aberrometric values were stable throughout a long period of time in patients with stable keratoconus. In patients with progressive form keratoconus, a significant improvement was found immediately after the procedure, however clinically relevant regression greater than 3 D was observed at the end of the follow up period.

Impact perceptuel d'une mise à zéro des segments plosifs de parole

En traitement du signal audio, les plosives sont des sons de parole très importants au regard de l’intelligibilité et de la qualité. Les plosives sont cependant difficiles à modéliser à l’aide des techniques usuelles (prédiction linéaire et codage par transformée), à cause de leur dynamique propre importante et à cause de leur nature non prédictible. Cette étude présente un exemple de système complet capable de détecter, segmenter, et altérer les plosives dans un flux de parole. Ce système est utilisé afin de vérifier la validité de l’hypothèse suivante : La phase d’éclatement (de burst) des plosives peut être mise à zéro, de façon perceptuellement équivalente. L’impact sur la qualité subjective de cette transformation est évalué sur une banque de phrases enregistrées. Les résultats de cette altération hautement destructive des signaux tendent à montrer que l’impact perceptuel est mineur. Les implications de ces résultats pour le codage de la parole sont abordées.

Seasonal concentration decomposition across segments of tourism demand

A la hora de aplicar medidas desestacionalizadoras, a los gestores de destinos turísticos les resulta complicado identificar qué tipo de turistas contribuyen a la desestacionalización, ya que estos turistas potenciales pueden estar pasando desapercibido por no disponer de una metodología que los identifique. Teniendo en cuenta esta deficiencia, en esta tesis se ha querido conseguir un enfoque de medición que proporcione información acerca del tipo de turista objetivo para reducir la concentración estacional en los destinos analizados. Para ello, la metodología que se emplea en esta tesis, que incluye la descomposición aditiva del índice de Gini, proporciona información acerca de la contribución de cada segmento de demanda a la concentración estacional total de un destino. Mediante el empleo de dicha descomposición, el componente estacional puede ser expresado a través de unos efectos relativos marginales que permiten identificar a aquellos turistas que se manifiesten más favorables para reducir la estacionalidad. De manera complementaria, se han estimado los factores estacionales mediante el método multiplicativo que sirven para mejorar el análisis ya que proporcionan los patrones estacionales de los segmentos de demanda analizados. Además, según el destino analizado, se han utilizado clasificaciones complejas atendiendo al origen del turista, su principal motivación de viaje y la región visitada dentro de cada uno de los destinos analizados, las cuales, han permitido discernir con mayor precisión dentro de clasificaciones poco homogéneas. La metodología empleada en esta tesis se propone como una medida de control y seguimiento con la que, analizando la evolución de los efectos relativos marginales a lo largo del período de los que se dispongan datos suficientemente desagregados y, sobre todo, del último año, podrían ajustarse las políticas turísticas orientadas a reducir los efectos de la estacionalidad. Con la aplicación de la metodología propuesta en los destinos turísticos analizados, en los que se ha empleado un nivel de desagregación suficiente, se pretende aportar información adicional a los gestores del turismo en cuanto a qué turistas deben dirigir sus políticas de captación, siempre y cuando su objetivo sea reducir la concentración estacional en estos destinos. Del mismo modo, se pretende conseguir una mejora de la efectividad de las políticas contra la estacionalidad, dirigiéndolas hacia aquellos segmentos de demanda identificados como menos propensos a la estacionalidad. Esta tesis ha sido elaborada por compendio de publicaciones y se ha estructurado en siete capítulos. El primer capítulo es una introducción donde se presentan las implicaciones de esta tesis en cuanto a los aspectos relacionados con la estacionalidad, así como la metodología empleada para la medición de la misma en los destinos analizados. En los siguientes capítulos se analiza la concentración estacional de tres destinos y sus regiones: el litoral de Andalucía (segundo y tercer capítulo), Argentina (cuarto y quinto capítulo), y el Reino Unido (sexto capítulo). Los resultados se muestran con la copia incluida de las cinco publicaciones que conforman esta tesis. Por último, se proporciona las conclusiones en el séptimo capítulo, donde se muestra un análisis general y un resumen de las conclusiones de todas las contribuciones.

Robust Stereo Visual Odometry through a Probabilistic Combination of Points and Line Segments

Most approaches to stereo visual odometry reconstruct the motion based on the tracking of point features along a sequence of images. However, in low-textured scenes it is often difficult to encounter a large set of point features, or it may happen that they are not well distributed over the image, so that the behavior of these algorithms deteriorates. This paper proposes a probabilistic approach to stereo visual odometry based on the combination of both point and line segment that works robustly in a wide variety of scenarios. The camera motion is recovered through non-linear minimization of the projection errors of both point and line segment features. In order to effectively combine both types of features, their associated errors are weighted according to their covariance matrices, computed from the propagation of Gaussian distribution errors in the sensor measurements. The method, of course, is computationally more expensive that using only one type of feature, but still can run in real-time on a standard computer and provides interesting advantages, including a straightforward integration into any probabilistic framework commonly employed in mobile robotics.

The Myosin Heavy Chain specific A4.1025 antibody discriminates different cardiac segments in ancient groups of gnathostomes: Morphological and evolutionary implications

The pan-Myosin Heavy Chain (pan-MyHC) marker MF20 have been reported to show similar, homogeneous signal in the myocardial segments of the heart of teleosts and tetrapods. However, in an ongoing study of the myocardial structure of the dogfish (Scyliorhinus canicula; Chondrichthyes), we observed differential immunostaining of the cardiac segments using another pan-MyHC, the A4.1025 antibody. In order to investigate the relevance of this finding for better understanding of the morphology and evolution of the vertebrate heart, we performed immunohistochemistry, slot blot and western blot in several species of chondrichthyans, actinopterygians and mammals using the above mentioned antibodies. In the dogfish heart, A4.1025 and MF20 specifically recognized MyHC isoforms, although with different degree of affinity. MF20 reactivity was homogeneous and high in all the myocardial segments. However, A4.1025 reactivity was heterogeneous. It was high in the sinus venosus (external layer), atrium and atrioventricular region, low in the ventricle and conus arteriosus, and null in the internal layer of the sinus venosus. A heterogeneous pattern of A4.1025 immunoreactivity was also detected in two other elasmobranchs, a holocephalan, a polypteryform and an acipenseriform. In all of these species, MF20 immunoreactivity was homogeneous. In addition, both markers showed a homogeneous immunoreactivity pattern in teleosts and mammals. Our results indicate that in the hearts of ancient gnathostomes, in all of which a conspicuous conus arteriosus exists, one or more MyHC isoforms with low affinity for A4.1025 show segment-specific distributions. Thus, A4.1025 appears to be an appropriated marker to identify the cardiac segments and their boundaries. We propose that the segmentspecific distribution of MyHC isoforms may generate a particular type of myocardial contractility associated with the presence of a conus arteriosus.

Dietary behaviours, impulsivity and food involvement: identification of three consumer segments

This study aims to (1) identify consumer segments based on consumers’ impulsivity and level of food involvement, and (2) examine the dietary behaviours of each consumer segment. An Internet-based cross-sectional survey was conducted among 530 respondents. The mean age of the participants was 49.2 ± 16.6 years, and 27% were tertiary educated. Two-stage cluster analysis revealed three distinct segments; “impulsive, involved” (33.4%), “rational, health conscious” (39.2%), and “uninvolved” (27.4%). The “impulsive, involved” segment was characterised by higher levels of impulsivity and food involvement (importance of food) compared to the other two segments. This segment also reported significantly more frequent consumption of fast foods, takeaways, convenience meals, salted snacks and use of ready-made sauces and mixes in cooking compared to the “rational, health conscious” consumers. They also reported higher frequency of preparing meals at home, cooking from scratch, using ready-made sauces and mixes in cooking and higher vegetable consumption compared to the “uninvolved” consumers. The findings show the need for customised approaches to the communication and promotion of healthy eating habits.

Electronic states of trans-polyacetylene, poly(p-phenylene vinylene) and sp-hybridised carbon species in amorphous hydrogenated carbon probed by resonant Raman scattering

Inclusions of sp-hybridised, trans-polyacetylene [trans-(CH)x] and poly(p-phenylene vinylene) (PPV) chains are revealed using resonant Raman scattering (RRS) investigation of amorphous hydrogenated carbon (a-C:H) films in the near IR – UV range. The RRS spectra of trans-(CH)x core Ag modes and the PPV CC-H phenylene mode are found to transform and disperse as the laser excitation energy ћωL is increased from near IR through visible to UV, whereas sp-bonded inclusions only become evident in UV. This is attributed to ћωL probing of trans-(CH)x chain inhomogeneity and the distribution of chains with varying conjugation length; for PPV to the resonant probing of phelynene ring disorder; and for sp segments, to ћωL probing of a local band gap of end-terminated polyynes. The IR spectra analysis confirmed the presence of sp, trans-(CH)x and PPV inclusions. The obtained RRS results for a-C:H denote differentiation between the core Ag trans-(CH)x modes and the PPV phenylene mode. Furthermore, it was found that at various laser excitation energies the changes in Raman spectra features for trans-(CH)x segments included in an amorphous carbon matrix are the same as in bulk trans-polyacetylene. The latter finding can be used to facilitate identification of trans-(CH)x in the spectra of complex carbonaceous materials.

The mechanics of disc degeneration from an engineering and computational modelling viewpoint

The anatomy and microstructure of the spine and in particular the intervertebral disc are intimately linked to how they operate in vivo and how they distribute loads to the adjacent musculature and bony anatomy. The degeneration of the intervertebral discs may be characterised by a loss of hydration, loss of disc height, a granular texture and the presence of annular lesions. As such, degeneration of the intervertebral discs compromises the mechanical integrity of their components and results in adaption and modification in the mechanical means by which loads are distributed between adjacent spinal motion segments.

Negotiating multiple identities between school and the outside world : A critical discourse analysis

This article examines interview talk of three students in an Australian high school to show how they negotiate their young adult identities between school and the outside world. It draws on Bakhtin’s concepts of dialogism and heteroglossia to argue that identities are linguistically and corporeally constituted. A critical discourse analysis of segments of transcribed interviews and student-related public documents finds a mismatch between a social justice curriculum at school and its transfer into students’ accounts of outside school lived realities. The article concludes that a productive social justice pedagogy must use its key principles of (con)textual interrogation to engage students in reflexive practice about their positioning within and against discourses of social justice in their student and civic lives. An impending national curriculum must decide whether or not it negotiates the discursive divide any better.

A tri-dimensional approach for auditing brand loyalty

Over the past twenty years brand loyalty has been an important topic for both marketing practitioners and academics. While practitioners have produced proprietary brand loyalty audit models, there has been little academic research to make transparent the methodology that underpins these audits and to enable practitioners to understand, develop and conduct their own audits. In this paper, we propose a framework for a brand loyalty audit that uses a tri-dimensional approach to brand loyalty, which includes behavioural loyalty and the two components of attitudinal loyalty: emotional and cognitive loyalty. In allowing for different levels and intensity of brand loyalty, this tri-dimensional approach is important from a managerial perspective. It means that loyalty strategies that arise from a brand audit can be made more effective by targeting the market segments that demonstrate the most appropriate combination of brand loyalty components. We propose a matrix with three dimensions (emotional, cognitive and behavioural loyalty) and two levels (high and low loyalty) to facilitate a brand loyalty audit. To demonstrate this matrix, we use the example of financial services, in particular a rewards-based credit card.

Drivers constraints and the future of off-site manufacture in Australia.

Much has been written on Off-site Manufacture (OSM) in construction, particularly regarding the perceived benefits and barriers to implementation. However, very little understanding of the state of OSM in the Australian construction industry exists. A ‘scoping study' has recently been undertaken to determine the ‘state-of-the-art’ of OSM in Australia. This involved several industry workshops, interviews and case studies across four major states of Australia. The study surveyed a range of suppliers across the construction supply-chain, incorporating the civil, commercial and housing segments of the market. This revealed that skills shortages and lack of adequate OSM knowledge are generally the greatest issues facing OSM in Australia. The drivers and constraints that emerged from the research were, in large measure, consistent with those found in the US and UK, although some Australian anomalies are evident, such as the geographical disparity of markets. A comparative analysis with similar studies in the UK and US is reported, illustrating both the drivers and constraints confronting the industry in Australia. OSM uptake into the future is however dependent on many factors, not least of which is a better understanding of the construction process and its associated costs.

Loading applied on prosthetic knee of transfemoral amputee: comparison of inverse dynamics and direct measurements

Inverse dynamics is the most comprehensive method that gives access to the net joint forces and moments during walking. However it is based on assumptions (i.e., rigid segments linked by ideal joints) and it is known to be sensitive to the input data (e.g., kinematic derivatives, positions of joint centres and centre of pressure, inertial parameters). Alternatively, transducers can be used to measure directly the load applied on the residuum of transfemoral amputees. So, the purpose of this study was to compare the forces and moments applied on a prosthetic knee measured directly with the ones calculated by three inverse dynamics computations - corresponding to 3 and 2 segments, and « ground reaction vector technique » - during the gait of one patient. The maximum RMSEs between the estimated and directly measured forces (i.e., 56 N) and moment (i.e., 5 N.m) were relatively small. However the dynamic outcomes of the prosthetic components (i.e., absorption of the foot, friction and limit stop of the knee) were only partially assessed with inverse dynamic methods.

Comparing the ethical predisposition of university students in five English-speaking countries : an examination of 14 questionable business practices

Recent years have seen intense scrutiny focused on the reported ethical breaches of enterprises across the globe. At the forefront of the accompanying criticism are the actions of giant American firms such as WorldCom, Arthur Anderson, and Enron. However, such deviations from acceptable standards of conduct have not been confined to the American market. Australia endured its era of “corporate excess” in the 1980s [Milton-Smith, 1997]. As a result, a spate of ethics-based research was undertaken in the early 1990s. More recently, China has been identified as a major venue for behavior deemed to be unacceptable, even unsafe. Issues such as counterfeit fashion items, software, and automobile parts have been a concern for several years [Gonzalez, 2007]. Perhaps more disconcerting are the recent recalls of children’s products, many of which were produced for leading toy companies such as Mattel and Fisher-Price, because of the use of dangerous lead-based paint. As one might anticipate, news reports and consumer protection agencies have been quick to condemn any action that falls within the “controversial” category. Indeed, many segments of society characterize such actions as unethical behavior. One result of this increased level of concern is the higher level of attention given to ethics in higher education programs. Even accreditation bodies such as AACSB have virtually mandated the integration of ethics into the curriculum. As a consequence, academicians have ramped up their ethics-based research agendas.

Adaptive unsupervised learning of human actions

Automatic detection of suspicious activities in CCTV camera feeds is crucial to the success of video surveillance systems. Such a capability can help transform the dumb CCTV cameras into smart surveillance tools for fighting crime and terror. Learning and classification of basic human actions is a precursor to detecting suspicious activities. Most of the current approaches rely on a non-realistic assumption that a complete dataset of normal human actions is available. This paper presents a different approach to deal with the problem of understanding human actions in video when no prior information is available. This is achieved by working with an incomplete dataset of basic actions which are continuously updated. Initially, all video segments are represented by Bags-Of-Words (BOW) method using only Term Frequency-Inverse Document Frequency (TF-IDF) features. Then, a data-stream clustering algorithm is applied for updating the system's knowledge from the incoming video feeds. Finally, all the actions are classified into different sets. Experiments and comparisons are conducted on the well known Weizmann and KTH datasets to show the efficacy of the proposed approach.