Discovery of a High-Energy Gamma-Ray-Emitting Persistent Microquasar

Microquasars are stellar x-ray binaries that behave as a scaled down version of extragalactic quasars. The star LS 5039 is a new microquasar system with apparent persistent ejection of relativistic plasma at a 3 kiloparsec distance from the sun. It may also be associated with a gamma-ray source discovered by the Energetic Gamma Ray Experiment Telescope (EGRET) on board the COMPTON-Gamma Ray Observatory satellite. Before the discovery of LS 5039, merely a handful of microquasars had been identified in the Galaxy, and none of them was detected in high-energy gamma-rays.

Evolutionary dynamics of collective action in spatially structured populations.

Many models proposed to study the evolution of collective action rely on a formalism that represents social interactions as n-player games between individuals adopting discrete actions such as cooperate and defect. Despite the importance of spatial structure in biological collective action, the analysis of n-player games games in spatially structured populations has so far proved elusive. We address this problem by considering mixed strategies and by integrating discrete-action n-player games into the direct fitness approach of social evolution theory. This allows to conveniently identify convergence stable strategies and to capture the effect of population structure by a single structure coefficient, namely, the pairwise (scaled) relatedness among interacting individuals. As an application, we use our mathematical framework to investigate collective action problems associated with the provision of three different kinds of collective goods, paradigmatic of a vast array of helping traits in nature: "public goods" (both providers and shirkers can use the good, e.g., alarm calls), "club goods" (only providers can use the good, e.g., participation in collective hunting), and "charity goods" (only shirkers can use the good, e.g., altruistic sacrifice). We show that relatedness promotes the evolution of collective action in different ways depending on the kind of collective good and its economies of scale. Our findings highlight the importance of explicitly accounting for relatedness, the kind of collective good, and the economies of scale in theoretical and empirical studies of the evolution of collective action.

Analysis of the antibiotic prophylaxis prescribed by Spanish oral surgeons

Aim: To identify prophylactic antibiotic prescription practices among Spanish dentists with preferential dedication to Oral Surgery in different types of tooth extraction surgeries. Method: Members of the Spanish Oral Surgery Society were surveyed on antibiotic prophylaxis use in 4 different tooth extraction modalities scaled according to their surgical invasiveness. Results: Sixty-nine of the 105 distributed questionnaires were returned completed. Thirteen percent of the surveyed surgeons would prescribe antibiotics to prevent postoperative wound infection when confronted with conventional tooth extraction lasting less than 5 minutes. In the case of surgery lasting more than 5 minutes, the percentage of participants that would prescribe antibiotics increased to 39%. When a mucoperiosteal flap was elevated or an ostectomy was performed, 87% and 100%, respectively, would prescribe antibiotic prophylaxis. Amoxicillin and its combination with clavulanic acid were the most commonly prescribed antibiotics. All participants would prescribe the antibiotic orally, starting after surgery and with a duration that ranged from 2-8 days. Conclusions: The results obtained suggest that antibiotic prophylaxis for preventing local odontogenic infection is not being correctly implemented in Spain. This can generate new bacterial resistances, facilitate adverse drug reactions and favor opportunistic infections. Better designed studies are needed in order to clarify the role of antibiotics in the prevention of postsurgical wound infection

A Co-Processor Approach for Efficient Java Execution in Embedded Systems

This thesis deals with a hardware accelerated Java virtual machine, named REALJava. The REALJava virtual machine is targeted for resource constrained embedded systems. The goal is to attain increased computational performance with reduced power consumption. While these objectives are often seen as trade-offs, in this context both of them can be attained simultaneously by using dedicated hardware. The target level of the computational performance of the REALJava virtual machine is initially set to be as fast as the currently available full custom ASIC Java processors. As a secondary goal all of the components of the virtual machine are designed so that the resulting system can be scaled to support multiple co-processor cores. The virtual machine is designed using the hardware/software co-design paradigm. The partitioning between the two domains is flexible, allowing customizations to the resulting system, for instance the floating point support can be omitted from the hardware in order to decrease the size of the co-processor core. The communication between the hardware and the software domains is encapsulated into modules. This allows the REALJava virtual machine to be easily integrated into any system, simply by redesigning the communication modules. Besides the virtual machine and the related co-processor architecture, several performance enhancing techniques are presented. These include techniques related to instruction folding, stack handling, method invocation, constant loading and control in time domain. The REALJava virtual machine is prototyped using three different FPGA platforms. The original pipeline structure is modified to suit the FPGA environment. The performance of the resulting Java virtual machine is evaluated against existing Java solutions in the embedded systems field. The results show that the goals are attained, both in terms of computational performance and power consumption. Especially the computational performance is evaluated thoroughly, and the results show that the REALJava is more than twice as fast as the fastest full custom ASIC Java processor. In addition to standard Java virtual machine benchmarks, several new Java applications are designed to both verify the results and broaden the spectrum of the tests.

Thermal-Hydraulic Studies on the Safety Of VVER-440 Type Nuclear Power Plants

This thesis includes several thermal hydraulic analyses related to the Loviisa WER 440 nuclear power plant units. The work consists of experimental studies, analysis of the experiments, analysis of some plant transits and development of a calculational model for calculation of boric acid concentrations in the reactor. In the first part of the thesis, in the case of won of boric acid solution behaviour during long term cooling period of LOCAs, experiments were performed in scaled down test facilities. The experimental data together with the results of RELAPS/MOD3 simulations were used to develop a model for calculations of boric acid concentrations in the reactor during LOCAs. The results of calculations showed that margins to critical concentrations that would lead to boric acid crystallization were large, both in the reactor core and in the lower plenum. This was mainly caused by the fact that water in the primary cooling circuit includes borax (Na)BsO,.IOHZO), which enters the reactor when ECC water is taken from the sump and greatly increases boric acid solubility in water. In the second part, in the case of simulation of horizontal steam generators, experiments were performed with PACTEL integral test loop to simulate loss of feedwater transients. The PACTEL experiments, as well as earlier REWET III natural circulation tests, were analyzed with RELAPS/MOD3 Version Sm5 code. The analysis showed that the code was capable of simulating the main events during the experiments. However, in the case of loss of secondary side feedwater the code was not completely capable to simulate steam superheating in the secondary side of the steam generators. The third part of the work consists of simulations of Loviisa VVER reactor pump trip transients with RELAPSlMODI Eur, RELAPS/MOD3 and CATHARE codes. All three codes were capable to simulate the two selected pump trip transients and no significant differences were found between the results of different codes. Comparison of the calculated results with the data measured in the Loviisa plant also showed good agreement.

Quantum suppression of shot noise in field emitters

We have analyzed the shot noise of electron emission under strong applied electric fields within the Landauer-Bttiker scheme. In contrast to the previous studies of vacuum-tube emitters, we show that in new generation electron emitters, scaled down to the nanometer dimensions, shot noise much smaller than the Schottky noise is observable. Carbon nanotube field emitters are among possible candidates to observe the effect of shot-noise suppression caused by quantum partitioning.

Cooking and Active Leisure TAS Program, Spain: A Program Impact Pathways (PIP) analysis

Background. The “Cooking and Active Leisure” Tu y Alícia por la Salud (CAL-TAS) Program is a schoolbased pilot that addresses healthy lifestyle needs of Spanish secondary school students with initiatives that research has proven to improve dietary and physical activity behaviors. Objective. The objectives were to perform a Program Impact Pathways (PIP) analysis to describe key activities and processes of the CAL-TAS Program, identify Critical Quality Control Points (CCPs), and identify a suite of common indicators of healthy lifestyles to be applied across participant schools. Methods. The CAL-TAS Program designers and implementation team developed this PIP analysis through an iterative process and presented the results for feedback at the seven-country Healthy Lifestyles Program Evaluation Workshop held in Granada, Spain, 13–14 September 2013, under the auspices of the Mondelēz International Foundation. Results. The team identified three PIP CCPs: teachers’ motivation and training, changes in students’ knowledge of healthy lifestyles, and changes in students’ healthy lifestyle behavior. The selected indicators of the program’s impact on healthy lifestyles are adequacy of food intake, level of knowledge of healthy lifestyles gained, and adequacy of physical activity level according to World Health Organization recommendations. A clear definition of impact indicators, as well as collection of accurate data on healthy lifestyle behaviors and knowledge, is essential to understanding the effectiveness of this program before it can be scaled up. Conclusions. CAL-TAS is an effective secondary school-based program encouraging healthy lifestyles. The PIP analysis was instrumental in identifying CCPs to sustain and improve the quality of the program. The team hopes to sustain and improve the program through these program evaluation recommendations.

Chorros relativistas de origen estelar: los microcuasares

Galactic microquasars are certainly one of the most recent additions to the field of high energy Astrophysics. These new objects are just X-ray binaries with the ability to generate relativistic jets and their interest has been growing during the last decade. Today, they represent primary targets for all space based observatories working in the X-ray and [gamma]-ray domains. Behind such interest, there is hope that their study will assist us to understand some of the analog phenomena observed in distant quasars and active galactic nuclei, wich share with microquasars practically the same scaled-up physics. Microquasars are also believed to be among the different kind of sources responsible for the violent and ever changing appearance of the [gamma]-ray ski. In this paper we review the general situation of the microquasar topic, their identification and study, including comments on the recent observational and theoretical discoveries most relevant in our opinion.

Letkuventtiilin mitoitus säätökäyttöön

Tässä diplomityössä käydään läpi IEC-60534 -standardin mukainen säätöventtiilin mitoitus kokoonpuristumattomille ja –puristuville virtauksille laskennassa tarvittavine yhtälöineen. Teoreettisessa osassa esitellään RF-letkuventtiilien rakennetta ja ominaisuuksia. Lisäksi käydään läpi putkivirtauksen perusperiaatteita. Koska letkuventtiilissä virtaavana fluidina on usein jokin liete, on työssä esitelty menetelmä lietevirtauksen aiheuttaman paine-eron laskentaan. Työssä on käsitelty myös kavitaation syntyä, laskennalliset mahdollisuudet kavitaation ennustamiseen sekä keinoja kavitaation estämiseksi. Kokeellisessa osassa suoritettiin mittauksia kolmella erikokoisella RF-letkuventtiilillä, joissa kussakin käytettiin kolmea erityyppistä letkua. Mittausten perusteella pystyttiin laskemaan kapasiteettikertoimet sekä määrittämään säätökäyrät mitatuille venttiileille ja letkutyypeille. Näistä tuloksista säätökäyrille sovitettiin yhtälöt, joiden perusteella saatiin laskettua kapasiteettikertoimien arvot myös muille venttiilikoille.

Cromatografia de afinidade por íons metálicos imobilizados (IMAC) de biomoléculas: aspectos fundamentais e aplicações tecnológicas

Immobilized Metal Ion Affinity Cromatography - IMAC - is a group-specific based adsorption applied to the purification and structure-function studies of proteins and nucleic acids. The adsorption is based on coordination between a metal ion chelated on the surface of a solid matrix and electron donor groups at the surface of the biomolecule. IMAC is a highly selective, low cost, and easily scaled-up technique being used in research and commercial operations. A separation process can be designed for a specific molecule by just selecting an appropriate metal ion, chelating agent, and operational conditions such as pH, ionic strength, and buffer type.

PRACTICAL STOCHASTIC MODEL FOR CHEMICAL KINETICS

The Practical Stochastic Model is a simple and robust method to describe coupled chemical reactions. The connection between this stochastic method and a deterministic method was initially established to understand how the parameters and variables that describe the concentration in both methods were related. It was necessary to define two main concepts to make this connection: the filling of compartments or dilutions and the rate of reaction enhancement. The parameters, variables, and the time of the stochastic methods were scaled with the size of the compartment and were compared with a deterministic method. The deterministic approach was employed as an initial reference to achieve a consistent stochastic result. Finally, an independent robust stochastic method was obtained. This method could be compared with the Stochastic Simulation Algorithm developed by Gillespie, 1977. The Practical Stochastic Model produced absolute values that were essential to describe non-linear chemical reactions with a simple structure, and allowed for a correct description of the chemical kinetics.

Geostical analysis of spatial dynamics of Citrus Variegated Chlorossis

The spatial dynamics of Citrus Variegated Chlorosis (CVC) was studied in a five-year old commercial orchard of 'Valencia' sweet orange (Citrus sp.) trees, located in the northern region of the state of São Paulo, Brazil. One thousand trees were assessed in 25 rows of 40 trees, planted at 8 x 5 m spacing. Disease incidence data were taken beginning in March 1994 and ending in January 1996, at intervals of four to five months. Disease aggregation was observed through the dispersion index analysis (Ib), which was calculated by dividing the area into quadrants. CVC spatial dynamics was examined using semivariogram analysis, which revealed that the disease was aggregated in the field forming foci of 10 to 14 m. For each well-fitted model, a kriging map was created to better visualize the distribution of the disease. The spherical model was the best fit for the data in this study. Kriging maps also revealed that the incidence of CVC increased in periods during which the trees underwent vegetative growth, coinciding with greater expected occurrence of insect vectors of the bacterium in the field.

Kaupunkialueella toimivan sähkönjakeluverkkoyhtiön siirtohinnoittelun kehittäminen

Sähkönjakeluverkkoyhtiöllä on sähkön siirtopalveluun alueellinen monopoli. Siirtohinnoittelun reunaehdot tulevat sähkömarkkinalaista ja hintojen kohtuullisuutta valvoo ja sääntelee Energiamarkkinavirasto. Tässä työssä selvitetään Turku Energia Sähköverkot Oy:lle kustannusvastaavat aiheuttamisperiaatteen mukaiset siirtohinnat. Samalla muodostetaan yleis-, yö- ja kausituotteiden perusmaksuihin asiakkaan liittymispisteen pääsulakkeen kokoon perustuva porrastus. Sulakeporrastuksen käyttöönotolla pystytään kehittämään siirtohinnoittelun kustannusvastaavuutta ja noudattamaan aiheuttamisperiaatteen mukaista hinnoittelupolitiikkaa entistä paremmin. Työssä tutkitaan siirtohinnoittelun kehitysnäkymiä myös pidemmällä tähtäimellä. Älykkäiden sähköverkkojen kehittyminen ja erityisesti etäluettavien mittareiden käyttöönotto tulevat luomaan kehitysmahdollisuuksia siirtohinnoitteluun tulevaisuudessa. Laitteista saatavia tarkkoja sähkönkulutus- ja tehotietoja voidaan käyttää kustannusvastaavuuslaskennan taustalla. Jotta verkon käyttö olisi sen mitoitukseen nähden mahdollisimman tehokasta, tulisi kuorman jakautua mahdollisimman tasaisesti ajan suhteen. Verkossa esiintyviä kulutushuippuja pystytään tulevaisuudessa mahdollisesti tasoittamaan esimerkiksi kuorman ohjauksen avulla, jonka tehokeinona voidaan käyttää siirtohinnoittelua. Siirtohinnoilla voidaan mahdollisesti vaikuttaa myös esimerkiksi kulutuksen ja tuotannon ajoittamiseen sekä kannusta asiakkaita loistehon kompensointiin. Siirtotuotteiden täytyy myös kehittyä asiakkaiden tarpeiden kehittymisen rinnalla ja esimerkiksi sähkön laadun tuotteistaminen voi olla eräs keino vastaamaan tiukentuneisiin vaatimuksiin.

A study of combustion phenomena in circulating fluidized beds by developing and applying experimental and modelling methods for laboratory-scale reactors

The results shown in this thesis are based on selected publications of the 2000s decade. The work was carried out in several national and EC funded public research projects and in close cooperation with industrial partners. The main objective of the thesis was to study and quantify the most important phenomena of circulating fluidized bed combustors by developing and applying proper experimental and modelling methods using laboratory scale equipments. An understanding of the phenomena plays an essential role in the development of combustion and emission performance, and the availability and controls of CFB boilers. Experimental procedures to study fuel combustion behaviour under CFB conditions are presented in the thesis. Steady state and dynamic measurements under well controlled conditions were carried out to produce the data needed for the development of high efficiency, utility scale CFB technology. The importance of combustion control and furnace dynamics is emphasized when CFB boilers are scaled up with a once through steam cycle. Qualitative information on fuel combustion characteristics was obtained directly by comparing flue gas oxygen responses during the impulse change experiments with fuel feed. A one-dimensional, time dependent model was developed to analyse the measurement data Emission formation was studied combined with fuel combustion behaviour. Correlations were developed for NO, N2O, CO and char loading, as a function of temperature and oxygen concentration in the bed area. An online method to characterize char loading under CFB conditions was developed and validated with the pilot scale CFB tests. Finally, a new method to control air and fuel feeds in CFB combustion was introduced. The method is based on models and an analysis of the fluctuation of the flue gas oxygen concentration. The effect of high oxygen concentrations on fuel combustion behaviour was also studied to evaluate the potential of CFB boilers to apply oxygenfiring technology to CCS. In future studies, it will be necessary to go through the whole scale up chain from laboratory phenomena devices through pilot scale test rigs to large scale, commercial boilers in order to validate the applicability and scalability of the, results. This thesis shows the chain between the laboratory scale phenomena test rig (bench scale) and the CFB process test rig (pilot). CFB technology has been scaled up successfully from an industrial scale to a utility scale during the last decade. The work shown in the thesis, for its part, has supported the development by producing new detailed information on combustion under CFB conditions.

RELATIONSHIP BETWEEN CLIMATE VARIABLES, TRUNK GROWTH RATE AND WOOD DENSITY OF Eucalyptus grandis W. Mill ex Maiden TREES

ABSTRACT Climatic conditions stimulates the cambial activity of plants, and cause significant changes in trunk diameter growth and wood characteristics. The objective of this study was to evaluate the influence of climate variables in the diameter growth rate of the stem and the wood density of Eucalyptus grandis trees in different classes of the basal area. A total of 25 Eucalyptus trees at 22 months of age were selected according to the basal area distribution. Dendrometer bands were installed at the height of 1.30 meters (DBH) to monitor the diameter growth every 14 days, for 26 months. After measuring growth, the trees were felled and wood discs were removed at the DBH level to determine the radial density profile through x-ray microdensitometry and then re-scale the average values every 14 days. Climatic variables for the monitoring period were obtained and grouped every 14 days. The effect of the climate variables was determined by maximum and minimum growth periods in assessing trunk growth. These growth periods were related with precipitation, average temperature and relative air humidity. The re-scaled wood density values, calculated using the radial growth of the tree trunks measured accurately with steel dendrometers, enabled the determination of the relationship of small changes in wood density and the effect of the climatic variations and growth rate of eucalyptus tree trunks. A high sensitivity of the wood density to variation in precipitation levels was found.