Surface reconstruction using multiple light sources and perspective projection

This paper presents a method to recover 3D geometry of Lambertian surfaces by using multiple images taken from the same view point and with the scene illuminated from different positions. This approach differs from Stereo Photometry in that it considers the light source at a finite distance from the object and the perspective projection in image formation. The proposed model allows local solution and recovery of 3D coordinates, in addition to surface orientation. A procedure to calibrate the light sources is also presented. Results of the application of the algorithm to synthetic images are shown.

National accounts of Caribbean countries: methodologies, sources and quality, and a comparative Caribbean study

Includes bibliography

Photo-Fenton degradation kinetics of low ciprofloxacin concentration using different iron sources and pH

The aim of the present study was to compare the degradation kinetics of low (1 mg L-1) and high (25 mg L-1) concentrations of ciprofloxacin (CIP) aiming to decrease the concentration of additives and evaluate the pH limitation by the use of low iron concentrations and organic ligands. A parameterized kinetic model was satisfactorily fitted to the experimental data in order to study the performance of photo-Fenton process with specific iron sources (iron citrate, iron oxalate, iron nitrate) under different pH medium (2.5, 4.5, 6.5). The process modeling allowed selecting those process conditions (iron source, additives concentrations and pH medium) which maximize the two performance parameters related to the global equilibrium conversion and kinetic rate of the process. For the high CIP concentration, degradation was very influenced by the iron source, resulting in much lower efficiency with iron nitrate. At pH 4.5, highest TOC removal (0.87) was achieved in the presence of iron citrate, while similar CIP conversions were obtained with oxalate and citrate (0.98 after 10 min). For the low CIP concentration, much higher conversion was observed in the presence of citrate or oxalate in relation to iron nitrate up to pH 4.5. This behavior denotes the importance of complexation also at low dosages. Appropriate additives load (320 μM H 2O2; 6 μM Fe) resulted in a CIP conversion of 0.96 after10 min reaction with citrate up to pH 4.5. © 2013 Elsevier B.V. All rights reserved.

Effect of lipid sources and inclusion levels in diets for broiler chickens

This research aimed to evaluate the interactions and effects of 2 and 4% addition levels of poultry slaughterhouse fat (chicken tallow) and soybean oil in diets for broiler chickens. Two experiments were carried out using one-day-old male Cobb chicks in an entirely random design with a 2x2 factorial scheme. In the first experiment, 560 chicks were used to evaluate performance and carcass characteristics. In the second experiment, 100 chicks were used to determine the nutrient digestibility, dietary energy utilization and the lipase and amylase pancreatic activity. There was no interaction between the fat sources and the addition levels for any of the analyzed variables, except for the digestibility coefficient of dry matter (DCDM), which was higher in diets added with 2% soybean oil when compared to chicken tallow. The addition of 4% fat in the diet, regardless of fat source, improved the digestibility coefficient of ethereal extract (DCEE) and increased weight gain and feed intake. Moreover, in the initial phase, the addition of 4% fat to the diet increased lipase activity when compared to diets with 2% addition, and a positive correlation between DCEE and pancreatic lipase activity was observed. In conclusion, there is no interaction between fat sources and addition levels, except for DCDM. Carcass characteristics are not influenced by any of the studied factors. The addition of 4% fat increases pancreatic lipase activity and improves DCEE, resulting in greater weight gain, regardless of the tested fat source, making chicken tallow a great alternative to soybean oil.

Evaluation of sediment production and siltation in a small earth dam in Fernandópolis, SP

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Sources and levels of selenium on breast meat quality of broilers

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Effect of potassium sources and rates on arabica coffee yield, nutrition, and macronutrient export

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Probabilistic ictal EEG sources and temporal lobe epilepsy surgical outcome

Objective - For patients with medication refractory medial temporal lobe epilepsy (MTLE), surgery offers the hope of a cure. However, up to 30% of patients with MTLE continue to experience disabling seizures after surgery. The reasons why some patients do not achieve seizure freedom are poorly understood. A promising theory suggests that epileptogenic networks are broadly distributed in surgically refractory MTLE, involving regions beyond the medial temporal lobe. In this retrospective study, we aimed to investigate the distribution of epileptogenic networks in MTLE using Bayesian distributed EEG source analysis from preoperative ictal onset recordings. This analysis has the advantage of generating maps of source probability, which can be subjected to voxel-based statistical analyses.Methods - We compared 10 patients who achieved post-surgical seizure freedom with 10 patients who continued experiencing seizures after surgery. Voxel-based Wilcoxon tests were employed with correction for multiple comparisons.Results - We observed that ictal EEG source intensities were significantly more likely to occur in lateral temporal and posterior medial temporal regions in patients with continued seizures post-surgery.Conclusions - Our findings support the theory of broader spatial distribution of epileptogenic networks at seizure onset in patients with surgically refractory MTLE.

Fibrolytic enzyme production of Myceliophthora thermophila M.7.7. using inexpensive carbon sources and mineral nutrients

This study investigated the effect of inexpensive carbon and nitrogen sources on enzyme production by Myceliophthora thermophila M.7.7 in solid-state fermentation. Three kinds of lignocellulosic waste (corn straw, sugarcane bagasse and sugarcane straw) and six nitrogen sources (urea, calcium nitrate, analytical ammonium sulphate, yeast extract, agricultural fertilizer NPK 20-05-20 and fertilizing grade ammonium sulphate) were tested. Some physical-chermical parameters of the fermentation, such as temperature, initial pH and moisture content of the substrate on enzyme production, were evoluated. The maximum activities of xylanase (446.9 U/ml) endoglucanase (94.7 U/ml) and beta-glucosidase (2.8 U/ml) were observed in a mixture of corn straw and wheat bran (1:1 w/w) as the carbon source using fertilizer grade ammonium sulphate as the nitrogen source. This production occurred for an incubation period of 96 h, at 40°C, with initial moisture content of 70% and pH 5.0. These results have significant interest since they could be used for the future production of enzymes in a low-cost industrial process.

Performance, carcass characteristics and non-carcass components of Texel × Santa Inês lambs fed fat sources and monensin

Performance, carcass, non-carcass and commercial cuts and components of Texel × Santa Inês crossbred lambs, managed in confinement and fed diets based on soybean oil, soybeans and a conventional diet, with or without the use of monensin (78 ppm dry matter basis) were evaluated. Thirty-six Texel × Santa Inês lambs (18 males and 18 females) were managed in intensive systems. Animals were slaughtered after 87 days of confinement, and performance, carcass characteristics, weight and percentages of carcass and non-carcass components were evaluated. The animals fed the control diet had heavier carcass and parts than animals fed soybean, while the oil diet did not differ from the controls in most parameters. The animals fed soybean showed lower intake kg dry matter (DM), organic matter (OM), crude protein (CP), neutral detergent fiber (NDF) and metabolizable energy (ME) compared with animals fed the control diet, increased ether extract (EE) intake in kg, % body weight (BW) and metabolic weight (MW) and did not differ from the soybean oil diet. Animals receiving monensin had lower DM intake, OM, CP, EE, NDF, gross energy (GE) regardless of the expression, % kg BW, or % PM, than the animals that did not receive the additive. Males produced better and had heavier cuts than the females; the latter deposited subcutaneous fat earlier. Animals that received oil or soybean showed greater body weight and small intestine percentage. Soybean oil intake did not improve performance, carcass weights or parts of Santa Ines × Texel lambs in confinement. Soybeans at 15% dry matter reduced energy intake and lamb performance. The use of monensin at 78 ppm on a dry matter basis is not recommended for lambs in confinement, especially if associated with oil or soybeans that may harm animal performance.

Composite resin color stability: influence of light sources and immersion media

This study evaluated the influence of light sources and immersion media on the color stability of a nanofilled composite resin. Conventional halogen, high-power-density halogen and high-power-density light-emitting diode (LED) units were used. There were 4 immersion media: coffee, tea, Coke® and artificial saliva. A total of 180 specimens (10 mm x 2 mm) were prepared, immersed in artificial saliva for 24 h at 37±1ºC, and had their initial color measured with a spectrophotometer according to the CIELab system. Then, the specimens were immersed in the 4 media during 60 days. Data from the color change and luminosity were collected and subjected to statistical analysis by the Kruskall-Wallis test (p<0.05). For immersion time, the data were subjected to two-way ANOVA test and Fisher's test (p<0.05). High-power-density LED (ΔE=1.91) promoted similar color stability of the composite resin to that of the tested halogen curing units (Jet Lite 4000 plus--ΔE=2.05; XL 3000--ΔE=2.28). Coffee (ΔE=8.40; ΔL=-5.21) showed the highest influence on color stability of the studied composite resin. There was no significant difference in color stability regardless of the light sources, and coffee was the immersion medium that promoted the highest color changes on the tested composite resin.

Composite resin color stability: influence of light sources and immersion media

This study evaluated the influence of light sources and immersion media on the color stability of a nanofilled composite resin. Conventional halogen, high-power-density halogen and high-power-density light-emitting diode (LED) units were used. There were 4 immersion media: coffee, tea, Coke® and artificial saliva. A total of 180 specimens (10 mm x 2 mm) were prepared, immersed in artificial saliva for 24 h at 37±1ºC, and had their initial color measured with a spectrophotometer according to the CIELab system. Then, the specimens were immersed in the 4 media during 60 days. Data from the color change and luminosity were collected and subjected to statistical analysis by the Kruskall-Wallis test (p<0.05). For immersion time, the data were subjected to two-way ANOVA test and Fisher's test (p<0.05). High-power-density LED (ΔE=1.91) promoted similar color stability of the composite resin to that of the tested halogen curing units (Jet Lite 4000 plus--ΔE=2.05; XL 3000--ΔE=2.28). Coffee (ΔE=8.40; ΔL=-5.21) showed the highest influence on color stability of the studied composite resin. There was no significant difference in color stability regardless of the light sources, and coffee was the immersion medium that promoted the highest color changes on the tested composite resin.

Efficiency of nitrogen sources and rates on growth and dry matter yield of tifton 85

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Carbon monoxide and related trace gases and aerosols over the Amazon Basin during the wet and dry seasons

We present the results of airborne measurements of carbon monoxide (CO) and aerosol particle number concentration (CN) made during the Balan double dagger o Atmosf,rico Regional de Carbono na Amazonia (BARCA) program. The primary goal of BARCA is to address the question of basin-scale sources and sinks of CO2 and other atmospheric carbon species, a central issue of the Large-scale Biosphere-Atmosphere (LBA) program. The experiment consisted of two aircraft campaigns during November-December 2008 (BARCA-A) and May-June 2009 (BARCA-B), which covered the altitude range from the surface up to about 4500 m, and spanned most of the Amazon Basin. Based on meteorological analysis and measurements of the tracer, SF6, we found that airmasses over the Amazon Basin during the late dry season (BARCA-A, November 2008) originated predominantly from the Southern Hemisphere, while during the late wet season (BARCA-B, May 2009) low-level airmasses were dominated by northern-hemispheric inflow and mid-tropospheric airmasses were of mixed origin. In BARCA-A we found strong influence of biomass burning emissions on the composition of the atmosphere over much of the Amazon Basin, with CO enhancements up to 300 ppb and CN concentrations approaching 10 000 cm(-3); the highest values were in the southern part of the Basin at altitudes of 1-3 km. The Delta CN/Delta CO ratios were diagnostic for biomass burning emissions, and were lower in aged than in fresh smoke. Fresh emissions indicated CO/CO2 and CN/CO emission ratios in good agreement with previous work, but our results also highlight the need to consider the residual smoldering combustion that takes place after the active flaming phase of deforestation fires. During the late wet season, in contrast, there was little evidence for a significant presence of biomass smoke. Low CN concentrations (300-500 cm(-3)) prevailed basinwide, and CO mixing ratios were enhanced by only similar to 10 ppb above the mixing line between Northern and Southern Hemisphere air. There was no detectable trend in CO with distance from the coast, but there was a small enhancement of CO in the boundary layer suggesting diffuse biogenic sources from photochemical degradation of biogenic volatile organic compounds or direct biological emission. Simulations of CO distributions during BARCA-A using a range of models yielded general agreement in spatial distribution and confirm the important contribution from biomass burning emissions, but the models evidence some systematic quantitative differences compared to observed CO concentrations. These mismatches appear to be related to problems with the accuracy of the global background fields, the role of vertical transport and biomass smoke injection height, the choice of model resolution, and reliability and temporal resolution of the emissions data base.

Effect of supplementation of two sources and two levels of copper on lipid metabolism in Nellore beef cattle

This study was conducted with 35 Nellore beef cattle to determine the effect of supplementation of two levels and two copper sources (organic and inorganic) on metabolism of lipids and cholesterol of meat. The five treatments used were: Control: without copper supplementation, 110 or 140: 10 or 40 mg/kg DM (as Cu sulfate), O10 or O40: 10 or 40 mg/kg DM (as Cu proteinate). In general, the copper supplementation changed the fatty acid profile of meat (p < 0.05), with a higher proportion of unsaturated fatty acids and reduction of saturated fatty acids. There was no effect of supplementation on blood cholesterol and triglycerides, however; in general, there was a reduction in cholesterol concentration in the L dorsi (p < 0.05) compared to the control treatment through the reduction (p < 0.05) in the concentrations of GSH and GSH/GSSG ratio. The Cu supplementation did have an influence on metabolism of lipids. The production of healthier meat is beneficial to public health by reducing the risk of cardiovascular disease. (C) 2012 Elsevier Ltd. All rights reserved.