2S 7,1-17 en contexte historique, évaluation de la mise en forme et de la transmission du texte dans le débat portant sur la tradition deutéronomiste

L’objectif de ce mémoire est de mettre en lumière la mise en forme, la réception et la transmission de 2S 7,1-17 à l’intérieur du débat qui a présentement cours autour de la rédaction deutéronomiste, ainsi que de vérifier le lien possible de ce texte avec l’évolution de la pensée théologique juive issue de l’édition deutéronomiste. Notre recherche commence par établir un texte hébreu de travail fiable grâce à la critique textuelle. L’analyse syntaxique nous permet ensuite de proposer une traduction qui soit la plus fidèle possible au texte hébreu retenu afin de mieux comprendre le sens du texte dans sa langue originale. Nous abordons, dans le troisième chapitre, la question des différentes sources littéraires ayant pu servir à la composition du texte de 2S 7,1-17. L’exploration plus détaillée de quelques pistes qui sont apparues à la suite de la critique des sources et de la réception du texte de 2S 7,1-17 par le(s) Chroniste(s), nous permet de constater qu’à l’intérieur des traditions textuelles hébraïques, la prophétie de Nathan a évolué de façon significative dans le parcours des différentes traditions de relecture. À partir des quatres étapes de recherches, nous dégageons les éléments qui pourraient être mis en lien avec les théories existantes dans le cadre de l’histoire deutéronomiste et mettons en lumière les forces et les faiblesses des solutions proposées. Les résultats de la recherche nous permettent de penser que l’intégration de la prophétie de Nathan dans la trame historique s’expliquerait par la nécessité d’éclairer une suite d’événements selon diverses perspectives théologiques. Ce n’est qu’à partir des conditions exiliques que nous aurions le texte de 2S 7,1-17 le plus tardif offrant une réflexion sur la première histoire d’Israël. Dans ce sens, la prophétie de Nathan prendrait toute sa valeur et son extension bien au-delà de la seule histoire personnelle de David ou de Salomon.

L’effectivité des Conventions 29, 138 et 182 de l’Organisation internationale du travail sur l’éradication du travail des enfants en Mauritanie

L’objectif de cette étude consiste à déterminer si les conventions de l’Organisation internationale du travail (OIT) sont effectives en ce qui concerne l’éradication du travail des enfants en Mauritanie. Cette effectivité est appréciée en mesurant la réception juridique et la réception sociale en Mauritanie de la Convention 29 sur le travail forcé, de la Convention 138 sur l’âge minimum d’admission à l’emploi et de la Convention 182 sur les pires formes de travail des enfants. La réception juridique des conventions est mesurée par un examen de l’intégration de leurs dispositions dans le droit national mauritanien. La réception juridique comprend également l’appréciation du contrôle du respect des conventions en territoire mauritanien. La réception sociale fait référence, quant à elle, aux stratégies de mise en œuvre des conventions de l’OIT par le Gouvernement mauritanien à travers ses programmes et ses politiques. Notre analyse démontre que l’effectivité des Conventions 29, 138 et 182 de l’OIT en ce qui concerne l’éradication du travail des enfants en Mauritanie est, selon nous, partielle. Dans l’ensemble, la situation tend à s’améliorer et le Gouvernement mauritanien tente de respecter l’esprit de ces conventions et de leur faire écho dans le droit national. Toutefois, il n’existe pas beaucoup d’information sur l’impact des programmes mis en place pour éradiquer le travail des enfants.

Learning and Adjustment Outcomes in Socialized and Unsocialized Newcomers : An Ex- Post-Facto Comparative Study

Les restructurations et les mutations de plus en plus nombreuses dans les entreprises font évoluer la trajectoire de carrière des employés vers un cheminement moins linéaire et amènent une multiplication des changements de rôle (Delobbe & Vandenberghe, 2000). Les organisations doivent de plus en plus se soucier de l’intégration de ces nouveaux employés afin de leur transmettre les éléments fondamentaux du fonctionnement et de la culture qu’elles privilégient. Par contre, la plupart des recherches sur la socialisation organisationnelle portent sur les « meilleures pratiques », et les résultats qui en découlent sont mixtes. Cette étude comparative cherche à déterminer si et sur quelles variables les nouveaux employés socialisés par leur entreprise diffèrent des nouveaux employés « non socialisés ». Premièrement, cette étude vise à comparer ces deux groupes sur 1) les résultantes proximales (la maîtrise du contenu de la socialisation organisationnelle et la clarté de rôle) et 2) les résultantes distales (l’engagement organisationnel affectif, la satisfaction au travail et l’intention de quitter) du processus de socialisation organisationnelle, ainsi que sur 3) les caractéristiques des réseaux sociaux d’information, en contrôlant pour la proactivité. Dans un second temps, cette étude a pour objectif d’explorer si le processus de socialisation organisationnelle (les relations entre les variables) diffère entre les nouveaux employés socialisés ou non. Cinquante-trois nouveaux employés (moins d’un an d’ancienneté) d’une grande entreprise québécoise ont participé à cette étude. L’entreprise a un programme de socialisation en place, mais son exécution est laissée à la discrétion de chaque département, créant deux catégories de nouveaux employés : ceux qui ont été socialisés par leur département, et ceux qui n’ont pas été socialisés (« non socialisés »). Les participants ont été sondés sur les stratégies proactives, les résultantes proximales et distales et les caractéristiques des réseaux sociaux d’information. Pour le premier objectif, les résultats indiquent que les nouveaux employés socialisés maîtrisent mieux le contenu de la socialisation organisationnelle que les nouveaux employés non socialisés. En ce qui a trait au deuxième objectif, des différences dans le processus de socialisation organisationnelle ont été trouvées. Pour les nouveaux employés « non socialisés », la recherche proactive d’informations et la recherche de rétroaction sont liées à certaines caractéristiques des réseaux sociaux, alors que le cadrage positif est lié à la satisfaction au travail et à l’intention de quitter, et que la clarté de rôle est liée uniquement à la satisfaction au travail. Les nouveaux employés socialisés, quant à eux, démontrent des liens entre la maîtrise du contenu de la socialisation organisationnelle et chacune des résultantes distales (l’engagement organisationnel affectif, la satisfaction au travail et l’intention de quitter). Globalement, l’intégration des nouveaux employés non socialisés serait plutôt influencée par leurs stratégies proactives, tandis que celle des nouveaux employés non socialisés serait facilitée par leur maîtrise du contenu de la socialisation organisationnelle. De façon générale, cette étude comparative offre un aperçu intéressant des nouveaux employés rarement trouvé dans les recherches portant sur les « meilleures pratiques » de la socialisation organisationnelle. Des recommandations pour la recherche et la pratique en suivent.

Arab Women in Translation : the Dynamics of Representation and the Construction of Alterity

Cette recherche examine la traduction et la réception en France, en Grande Bretagne et aux États-Unis de la littérature contemporaine d’expression arabe écrite par des femmes, afin de répondre à deux questions principales: comment les écrivaines provenant de pays arabes perdent-elles leur agentivité dans les processus de traduction et de réception? Et comment la traduction et la réception de leurs textes contribuent-elles à la construction d’une altérité arabe? Pour y répondre, l’auteure examine trois romans présentant des traits thématiques et formels très différents, à savoir Fawḍā al-Ḥawāss (1997) par Ahlem Mosteghanemi, Innahā Lundun Yā ‘Azīzī (2001) par Hanan al-Shaykh et Banāt al-Riyāḍ (2005) par Rajaa Alsanea. L’analyse, basée sur le modèle à trois dimensions de Norman Fairclough, vise à découvrir comment les écrivaines expriment leur agentivité à travers l’écriture, et quelles images elles projettent d’elles-mêmes et plus généralement des femmes dans leurs sociétés respectives. L’auteure se penche ensuite sur les traductions anglaise et française de chaque roman. Elle examine les déplacements qui s’opèrent principalement sur le plan de la texture et le plan pragma-sémiotique, et interroge en quoi ces déplacements ébranlent l’autorité des écrivaines. Enfin, une étude de la réception de ces traductions en France, en Grande Bretagne et aux États-Unis vient enrichir l’analyse textuelle. À cette étape, les critiques éditoriales et universitaires ainsi que les choix éditoriaux relatifs au paratexte sont scrutés de façon à mettre en lumière les processus décisionnels, les discours et les tropes sous-tendant la mise en marché et la consommation de ces traductions. L’analyse des originaux révèle tout d’abord qu’à travers leurs textes, les auteures sont des agentes actives de changement social. Elles s’insurgent, chacune à sa manière, contre les discours hégémoniques tant locaux qu’occidentaux, et (ré-)imaginent leurs sociétés et leurs nations. Ce faisant, elles se créent leur propre espace discursif dans la sphère publique. Toutefois, la thèse montre que dans la plupart des traductions, les discours dissidents sont neutralisés, l’agentivité et la subjectivité des écrivaines minées au profit d’un discours dominant orientaliste. Ce même discours semble sous-tendre la réception des romans en traduction. Dans ce discours réifiant, l’expression de la différence culturelle est inextricablement imbriquée dans l’expression de la différence sexuelle: la « femme arabe » est la victime d’une religion islamique et d’une culture arabe essentiellement misogynes et arriérées. L’étude suggère, cependant, que ce sont moins les interventions des traductrices que les décisions des éditeurs, le travail de médiation opéré par les critiques, et l’intérêt (ou le désintérêt) des universitaires qui influencent le plus la manière dont ces romans sont mis en marché et reçus dans les nouveaux contextes. L’auteure conclut par rappeler l’importance d’une éthique de la traduction qui transcende toute approche binaire et se fonde sur une lecture éthique des textes qui fait ressortir le lien entre la poétique et la politique. Enfin, elle propose une lecture basée sur la reconnaissance du caractère situé du texte traduit comme du sujet lisant/traduisant.

Characterization of glutaraldehyde-immobilized chymotrypsin and an in-situ immobilized enzyme reactor using capillary electrophoresis-based peptide mapping

La digestion enzymatique des protéines est une méthode de base pour les études protéomiques ainsi que pour le séquençage en mode « bottom-up ». Les enzymes sont ajoutées soit en solution (phase homogène), soit directement sur le gel polyacrylamide selon la méthode déjà utilisée pour l’isolation de la protéine. Les enzymes protéolytiques immobilisées, c’est-à-dire insolubles, offrent plusieurs avantages tels que la réutilisation de l’enzyme, un rapport élevé d’enzyme-sur-substrat, et une intégration facile avec les systèmes fluidiques. Dans cette étude, la chymotrypsine (CT) a été immobilisée par réticulation avec le glutaraldehyde (GA), ce qui crée des particules insolubles. L’efficacité d’immobilisation, déterminée par spectrophotométrie d’absorbance, était de 96% de la masse totale de la CT ajouté. Plusieurs différentes conditions d’immobilisation (i.e., réticulation) tels que la composition/pH du tampon et la masse de CT durant la réticulation ainsi que les différentes conditions d’entreposage tels que la température, durée et humidité pour les particules GA-CT ont été évaluées par comparaison des cartes peptidiques en électrophorèse capillaire (CE) des protéines standards digérées par les particules. Les particules de GA-CT ont été utilisés pour digérer la BSA comme exemple d’une protéine repliée large qui requit une dénaturation préalable à la digestion, et pour digérer la caséine marquée avec de l’isothiocyanate de fluorescéine (FITC) comme exemple d’un substrat dérivé afin de vérifier l’activité enzymatique du GA-CT dans la présence des groupements fluorescents liés au substrat. La cartographie peptidique des digestions par les particules GA-CT a été réalisée par CE avec la détection par absorbance ultraviolet (UV) ou fluorescence induite par laser. La caséine-FITC a été, en effet, digérée par GA-CT au même degré que par la CT libre (i.e., soluble). Un microréacteur enzymatique (IMER) a été fabriqué par immobilisation de la CT dans un capillaire de silice fondu du diamètre interne de 250 µm prétraité avec du 3-aminopropyltriéthoxysilane afin de fonctionnaliser la paroi interne avec les groupements amines. Le GA a été réagit avec les groupements amine puis la CT a été immobilisée par réticulation avec le GA. Les IMERs à base de GA-CT étaient préparé à l’aide d’un système CE automatisé puis utilisé pour digérer la BSA, la myoglobine, un peptide ayant 9 résidus et un dipeptide comme exemples des substrats ayant taille large, moyenne et petite, respectivement. La comparaison des cartes peptidiques des digestats obtenues par CE-UV ou CE-spectrométrie de masse nous permettent d’étudier les conditions d’immobilisation en fonction de la composition et le pH du tampon et le temps de réaction de la réticulation. Une étude par microscopie de fluorescence, un outil utilisé pour examiner l’étendue et les endroits d’immobilisation GA-CT dans l’IMER, ont montré que l’immobilisation a eu lieu majoritairement sur la paroi et que la réticulation ne s’est étendue pas si loin au centre du capillaire qu’anticipée.

Low-Cost Micromechanically Tunable Optical Devices: Strained Resonator Engineering, Technological Implementation and Characterization

The rapid growth of the optical communication branches and the enormous demand for more bandwidth require novel networks such as dense wavelength division multiplexing (DWDM). These networks enable higher bitrate transmission using the existing optical fibers. Micromechanically tunable optical microcavity devices like VCSELs, Fabry-Pérot filters and photodetectors are core components of these novel DWDM systems. Several air-gap based tunable devices were successfully implemented in the last years. Even though these concepts are very promising, two main disadvantages are still remaining. On the one hand, the high fabrication and integration cost and on the other hand the undesired adverse buckling of the suspended membranes. This thesis addresses these two problems and consists of two main parts: • PECVD dielectric material investigation and stress control resulting in membranes shape engineering. • Implementation and characterization of novel tunable optical devices with tailored shapes of the suspended membranes. For this purposes, low-cost PECVD technology is investigated and developed in detail. The macro- and microstress of silicon nitride and silicon dioxide are controlled over a wide range. Furthermore, the effect of stress on the optical and mechanical properties of the suspended membranes and on the microcavities is evaluated. Various membrane shapes (concave, convex and planar) with several radii of curvature are fabricated. Using this resonator shape engineering, microcavity devices such as non tunable and tunable Fabry-Pérot filters, VCSELs and PIN photodetectors are succesfully implemented. The fabricated Fabry-Pérot filters cover a spectral range of over 200nm and show resonance linewidths down to 1.5nm. By varying the stress distribution across the vertical direction within a DBR, the shape and the radius of curvature of the top membrane are explicitely tailored. By adjusting the incoming light beam waist to the curvature, the fundamental resonant mode is supported and the higher order ones are suppressed. For instance, a tunable VCSEL with 26 nm tuning range, 400µW maximal output power, 47nm free spectral range and over 57dB side mode suppresion ratio (SMSR) is demonstrated. Other technologies, such as introducing light emitting organic materials in microcavities are also investigated.

Conceptual structures represented by conceptual graphs and formal concept analysis

Conceptual Graphs and Formal Concept Analysis have in common basic concerns: the focus on conceptual structures, the use of diagrams for supporting communication, the orientation by Peirce's Pragmatism, and the aim of representing and processing knowledge. These concerns open rich possibilities of interplay and integration. We discuss the philosophical foundations of both disciplines, and analyze their specific qualities. Based on this analysis, we discuss some possible approaches of interplay and integration.

Conceptual knowledge discovery and data analysis

In this paper, we discuss Conceptual Knowledge Discovery in Databases (CKDD) in its connection with Data Analysis. Our approach is based on Formal Concept Analysis, a mathematical theory which has been developed and proven useful during the last 20 years. Formal Concept Analysis has led to a theory of conceptual information systems which has been applied by using the management system TOSCANA in a wide range of domains. In this paper, we use such an application in database marketing to demonstrate how methods and procedures of CKDD can be applied in Data Analysis. In particular, we show the interplay and integration of data mining and data analysis techniques based on Formal Concept Analysis. The main concern of this paper is to explain how the transition from data to knowledge can be supported by a TOSCANA system. To clarify the transition steps we discuss their correspondence to the five levels of knowledge representation established by R. Brachman and to the steps of empirically grounded theory building proposed by A. Strauss and J. Corbin.

Women, Portuguese culture and Diaspora : Women from Goa in New Zealand and cultural adaptation

New Zealand is a nation of Migrants. Immigrants have played a significant role in the country’s economic growth and cultural development. With a population of four million people, New Zealand’s population is becoming increasingly culturally diverse. Almost one in five New Zealanders were born overseas, rising to one in three in its largest city, Auckland. Asians are the fastest growing ethnic group, increasing by around 140% since 1996. Indians account for 1.2% of the population (Statistics New Zealand, 2002). The Goan community in New Zealand is relatively small and its size is not formally recorded, however, anecdotally it appears to have grown to over 200 families in the Auckland area, with most arriving after 1996. For women who migrate, loneliness and isolation have been identified as the most ‘glaring’ experience and this is intensified by the loss of extended family networks when they migrate to a country where nuclear families are the norm (Leckie, 1995). The creation of new networks and maintenance of prior networks in new ways is crucial to the successful settlement and integration into a new country. This paper reports on how Goan, Indian women in Auckland, New Zealand used specific strategies to manage the adjustment to living in a new country. The findings reveal that participants used a variety of skills to settle in New Zealand such as cultivating a “can do” attitude, obtaining support and learning. These skills enabled them to move beyond their own culture and begin to take active part in New Zealand culture. However, this process was not immediate and the participants passed through a number of stages along a continuum of settlement and integration. These stages will be discussed below and situated within a body of literature.

The “right way” of Hermetism: disputes on Gnostic’s, Pagan’s and Christian’s (re-)visions of the Hermetic phonomenon in late antiquity

This paper aims to understand the phenomenon of Hermetism though the perspective of its process of reception and reproduction in society. It will explore the phenomenon that was the transformation of the Hermetica into a social discourse. The so-called technical and philosophical Hermetica are texts. A text is the result of a production: it is composed by men, and addressed to men. It is important to consider the intentions and values present in a text’s production, and to understand that its process of reception and reproduction in society are, in fact, complex and dynamic.

Reach & grasp therapy: Design and control of a 9-DOF robotic neuro-rehabilitation system

This paper presents the Gentle/G integrated system for reach & grasp therapy retraining following brain injury. The design, control and integration of an experimental grasp assistance unit is described for use in robot assisted stroke rehabilitation. The grasp assist unit is intended to work with the hardware and software of the Gentle/S robot although the hardware could be adapted to other rehabilitation applications. When used with the Gentle/S robot a total of 6 active and 3 passive degrees of freedom are available to provide active, active assist or passive grasp retraining in combination with reaching movements in a reach-grasp-transfer-release sequence.

Plug-and-play remote portlet publishing

Web Services for Remote Portlets (WSRP) is gaining attention among portal developers and vendors to enable easy development, increased richness in functionality, pluggability, and flexibility of deployment. Whilst currently not supporting all WSRP functionalities, open-source portal frameworks could in future use WSRP Consumers to access remote portlets found from a WSRP Producer registry service. This implies that we need a central registry for the remote portlets and a more expressive WSRP Consumer interface to implement the remote portlet functions. This paper reports on an investigation into a new system architecture, which includes a Web Services repository, registry, and client interface. The Web Services repository holds portlets as remote resource producers. A new data structure for expressing remote portlets is found and published by populating a Universal Description, Discovery and Integration (UDDI) registry. A remote portlet publish and search engine for UDDI has also been developed. Finally, a remote portlet client interface was developed as a Web application. The client interface supports remote portlet features, as well as window status and mode functions. Copyright (c) 2007 John Wiley & Sons, Ltd.

Design and management of sustainable built environments

The United Nation Intergovernmental Panel on Climate Change (IPCC) makes it clear that climate change is due to human activities and it recognises buildings as a distinct sector among the seven analysed in its 2007 Fourth Assessment Report. Global concerns have escalated regarding carbon emissions and sustainability in the built environment. The built environment is a human-made setting to accommodate human activities, including building and transport, which covers an interdisciplinary field addressing design, construction, operation and management. Specifically, Sustainable Buildings are expected to achieve high performance throughout the life-cycle of siting, design, construction, operation, maintenance and demolition, in the following areas: • energy and resource efficiency; • cost effectiveness; • minimisation of emissions that negatively impact global warming, indoor air quality and acid rain; • minimisation of waste discharges; and • maximisation of fulfilling the requirements of occupants’ health and wellbeing. Professionals in the built environment sector, for example, urban planners, architects, building scientists, engineers, facilities managers, performance assessors and policy makers, will play a significant role in delivering a sustainable built environment. Delivering a sustainable built environment needs an integrated approach and so it is essential for built environment professionals to have interdisciplinary knowledge in building design and management . Building and urban designers need to have a good understanding of the planning, design and management of the buildings in terms of low carbon and energy efficiency. There are a limited number of traditional engineers who know how to design environmental systems (services engineer) in great detail. Yet there is a very large market for technologists with multi-disciplinary skills who are able to identify the need for, envision and manage the deployment of a wide range of sustainable technologies, both passive (architectural) and active (engineering system),, and select the appropriate approach. Employers seek applicants with skills in analysis, decision-making/assessment, computer simulation and project implementation. An integrated approach is expected in practice, which encourages built environment professionals to think ‘out of the box’ and learn to analyse real problems using the most relevant approach, irrespective of discipline. The Design and Management of Sustainable Built Environment book aims to produce readers able to apply fundamental scientific research to solve real-world problems in the general area of sustainability in the built environment. The book contains twenty chapters covering climate change and sustainability, urban design and assessment (planning, travel systems, urban environment), urban management (drainage and waste), buildings (indoor environment, architectural design and renewable energy), simulation techniques (energy and airflow), management (end-user behaviour, facilities and information), assessment (materials and tools), procurement, and cases studies ( BRE Science Park). Chapters one and two present general global issues of climate change and sustainability in the built environment. Chapter one illustrates that applying the concepts of sustainability to the urban environment (buildings, infrastructure, transport) raises some key issues for tackling climate change, resource depletion and energy supply. Buildings, and the way we operate them, play a vital role in tackling global greenhouse gas emissions. Holistic thinking and an integrated approach in delivering a sustainable built environment is highlighted. Chapter two demonstrates the important role that buildings (their services and appliances) and building energy policies play in this area. Substantial investment is required to implement such policies, much of which will earn a good return. Chapters three and four discuss urban planning and transport. Chapter three stresses the importance of using modelling techniques at the early stage for strategic master-planning of a new development and a retrofit programme. A general framework for sustainable urban-scale master planning is introduced. This chapter also addressed the needs for the development of a more holistic and pragmatic view of how the built environment performs, , in order to produce tools to help design for a higher level of sustainability and, in particular, how people plan, design and use it. Chapter four discusses microcirculation, which is an emerging and challenging area which relates to changing travel behaviour in the quest for urban sustainability. The chapter outlines the main drivers for travel behaviour and choices, the workings of the transport system and its interaction with urban land use. It also covers the new approach to managing urban traffic to maximise economic, social and environmental benefits. Chapters five and six present topics related to urban microclimates including thermal and acoustic issues. Chapter five discusses urban microclimates and urban heat island, as well as the interrelationship of urban design (urban forms and textures) with energy consumption and urban thermal comfort. It introduces models that can be used to analyse microclimates for a careful and considered approach for planning sustainable cities. Chapter six discusses urban acoustics, focusing on urban noise evaluation and mitigation. Various prediction and simulation methods for sound propagation in micro-scale urban areas, as well as techniques for large scale urban noise-mapping, are presented. Chapters seven and eight discuss urban drainage and waste management. The growing demand for housing and commercial developments in the 21st century, as well as the environmental pressure caused by climate change, has increased the focus on sustainable urban drainage systems (SUDS). Chapter seven discusses the SUDS concept which is an integrated approach to surface water management. It takes into consideration quality, quantity and amenity aspects to provide a more pleasant habitat for people as well as increasing the biodiversity value of the local environment. Chapter eight discusses the main issues in urban waste management. It points out that population increases, land use pressures, technical and socio-economic influences have become inextricably interwoven and how ensuring a safe means of dealing with humanity’s waste becomes more challenging. Sustainable building design needs to consider healthy indoor environments, minimising energy for heating, cooling and lighting, and maximising the utilisation of renewable energy. Chapter nine considers how people respond to the physical environment and how that is used in the design of indoor environments. It considers environmental components such as thermal, acoustic, visual, air quality and vibration and their interaction and integration. Chapter ten introduces the concept of passive building design and its relevant strategies, including passive solar heating, shading, natural ventilation, daylighting and thermal mass, in order to minimise heating and cooling load as well as energy consumption for artificial lighting. Chapter eleven discusses the growing importance of integrating Renewable Energy Technologies (RETs) into buildings, the range of technologies currently available and what to consider during technology selection processes in order to minimise carbon emissions from burning fossil fuels. The chapter draws to a close by highlighting the issues concerning system design and the need for careful integration and management of RETs once installed; and for home owners and operators to understand the characteristics of the technology in their building. Computer simulation tools play a significant role in sustainable building design because, as the modern built environment design (building and systems) becomes more complex, it requires tools to assist in the design process. Chapter twelve gives an overview of the primary benefits and users of simulation programs, the role of simulation in the construction process and examines the validity and interpretation of simulation results. Chapter thirteen particularly focuses on the Computational Fluid Dynamics (CFD) simulation method used for optimisation and performance assessment of technologies and solutions for sustainable building design and its application through a series of cases studies. People and building performance are intimately linked. A better understanding of occupants’ interaction with the indoor environment is essential to building energy and facilities management. Chapter fourteen focuses on the issue of occupant behaviour; principally, its impact, and the influence of building performance on them. Chapter fifteen explores the discipline of facilities management and the contribution that this emerging profession makes to securing sustainable building performance. The chapter highlights a much greater diversity of opportunities in sustainable building design that extends well into the operational life. Chapter sixteen reviews the concepts of modelling information flows and the use of Building Information Modelling (BIM), describing these techniques and how these aspects of information management can help drive sustainability. An explanation is offered concerning why information management is the key to ‘life-cycle’ thinking in sustainable building and construction. Measurement of building performance and sustainability is a key issue in delivering a sustainable built environment. Chapter seventeen identifies the means by which construction materials can be evaluated with respect to their sustainability. It identifies the key issues that impact the sustainability of construction materials and the methodologies commonly used to assess them. Chapter eighteen focuses on the topics of green building assessment, green building materials, sustainable construction and operation. Commonly-used assessment tools such as BRE Environmental Assessment Method (BREEAM), Leadership in Energy and Environmental Design ( LEED) and others are introduced. Chapter nineteen discusses sustainable procurement which is one of the areas to have naturally emerged from the overall sustainable development agenda. It aims to ensure that current use of resources does not compromise the ability of future generations to meet their own needs. Chapter twenty is a best-practice exemplar - the BRE Innovation Park which features a number of demonstration buildings that have been built to the UK Government’s Code for Sustainable Homes. It showcases the very latest innovative methods of construction, and cutting edge technology for sustainable buildings. In summary, Design and Management of Sustainable Built Environment book is the result of co-operation and dedication of individual chapter authors. We hope readers benefit from gaining a broad interdisciplinary knowledge of design and management in the built environment in the context of sustainability. We believe that the knowledge and insights of our academics and professional colleagues from different institutions and disciplines illuminate a way of delivering sustainable built environment through holistic integrated design and management approaches. Last, but not least, I would like to take this opportunity to thank all the chapter authors for their contribution. I would like to thank David Lim for his assistance in the editorial work and proofreading.

ATD: a multiplatform for semiautomatic 3-D detection of kidneys and their pathology in real time

This research presents a novel multi-functional system for medical Imaging-enabled Assistive Diagnosis (IAD). Although the IAD demonstrator has focused on abdominal images and supports the clinical diagnosis of kidneys using CT/MRI imaging, it can be adapted to work on image delineation, annotation and 3D real-size volumetric modelling of other organ structures such as the brain, spine, etc. The IAD provides advanced real-time 3D visualisation and measurements with fully automated functionalities as developed in two stages. In the first stage, via the clinically driven user interface, specialist clinicians use CT/MRI imaging datasets to accurately delineate and annotate the kidneys and their possible abnormalities, thus creating “3D Golden Standard Models”. Based on these models, in the second stage, clinical support staff i.e. medical technicians interactively define model-based rules and parameters for the integrated “Automatic Recognition Framework” to achieve results which are closest to that of the clinicians. These specific rules and parameters are stored in “Templates” and can later be used by any clinician to automatically identify organ structures i.e. kidneys and their possible abnormalities. The system also supports the transmission of these “Templates” to another expert for a second opinion. A 3D model of the body, the organs and their possible pathology with real metrics is also integrated. The automatic functionality was tested on eleven MRI datasets (comprising of 286 images) and the 3D models were validated by comparing them with the metrics from the corresponding “3D Golden Standard Models”. The system provides metrics for the evaluation of the results, in terms of Accuracy, Precision, Sensitivity, Specificity and Dice Similarity Coefficient (DSC) so as to enable benchmarking of its performance. The first IAD prototype has produced promising results as its performance accuracy based on the most widely deployed evaluation metric, DSC, yields 97% for the recognition of kidneys and 96% for their abnormalities; whilst across all the above evaluation metrics its performance ranges between 96% and 100%. Further development of the IAD system is in progress to extend and evaluate its clinical diagnostic support capability through development and integration of additional algorithms to offer fully computer-aided identification of other organs and their abnormalities based on CT/MRI/Ultra-sound Imaging.