Determinação condutométria de carbonato residual do calcário aplicado no solo por análise em fluxo

The objective of this study was to evaluate a flow injection system for determination of residual CO3(2-) in soil amended with lime material. It was used a closed system were the CO2 released from soil sample acidified with 0.5 mol L-1 HCl was capted in a 0.2 mol L-1 NaOH solution. After 16h the capted CO2 was determined by conductivimetry using a flow injection system. The results obtained by the proposed method were significantly correlated with those reported in soil samples used by the International Soil Analytical Exchange Programe. The regression equation was: y = 0.987x -- 0.075 r = 0.996, P > 0.01. For acid soils amended with CaCO3 the method showed a deviation error of 2.7%, detection limit was 0.077 mmol kg-1 of CO3(2-), and a recovery of 99.7% of the total CO3(2-) added in soil sample. The method was easily adapted for routine determination of residual CO3(2-) in soil samples with an analytical frequency of 40 samples per hour.

Incorporação de CuSO4 residual em argamassa, como método de disposição final

Residual CuSO4 was incorporated into the mass utilized for cement preparation. To a cement mass with 1:0.5:5 of cement, lime and sand to 0.25, 0.50, 0.75 and 1.00% of residual CuSO4 were added. The sulfate was mixed separately with lime and water to induce metal precipitation. The hardened test bodies were submerged in Milli-Q water for three months. No Cu was detected in the water by Atomic Absorption Spectrometry. The best proportion for mechanical resistance and porosity is 0.50%. The cement is adequate for non-structural objects.

On the Rule of Mixtures for Predicting Stress-Softening and Residual Strain Effects in Biological Tissues and Biocompatible Materials

In this work, we use the rule of mixtures to develop an equivalent material model in which the total strain energy density is split into the isotropic part related to the matrix component and the anisotropic energy contribution related to the fiber effects. For the isotropic energy part, we select the amended non-Gaussian strain energy density model, while the energy fiber effects are added by considering the equivalent anisotropic volumetric fraction contribution, as well as the isotropized representation form of the eight-chain energy model that accounts for the material anisotropic effects. Furthermore, our proposed material model uses a phenomenological non-monotonous softening function that predicts stress softening effects and has an energy term, derived from the pseudo-elasticity theory, that accounts for residual strain deformations. The model’s theoretical predictions are compared with experimental data collected from human vaginal tissues, mice skin, poly(glycolide-co-caprolactone) (PGC25 3-0) and polypropylene suture materials and tracheal and brain human tissues. In all cases examined here, our equivalent material model closely follows stress-softening and residual strain effects exhibited by experimental data

Language recovery and evidence of residual deficits after nonthalamic subcortical stroke: A 1 year follow-up study

A variety of language disturbances including aphasia have been described after subcortical stroke but less is known about the factors that influence the long-term recovery of stroke-induced language dysfunction. We prospectively examined the role of the affected hemisphere and the lesion site in the occurrence and recovery of language deficits in nonthalamic subcortical stroke. Forty patients with unilateral basal gangliastroke underwent language assessment within 1 week, 3 months and 1 year after stroke. Disturbances in at least one language domain were observed in 35 patients during the first week post stroke including aphasia diagnosed in 11 patients. Importantly, the appearance of deficits after stroke onset and the improvement of language function were not determined by the site of subcortical lesion, but instead were critically influenced by the affected hemisphere. In fact, the language impairments following left and right basal ganglia stroke mirrored the language dysfunction observed after cortical lesions in the same hemisphere. A significant overall language improvement was observed at 3 months after stroke, although residual deficits in languageexecutive function were the most commonly observed impairment at 1 year follow-up. Although a substantial improvement of language function can be expected after nonthalamic subcortical stroke, our findings suggest that language recovery may not be fully achieved at 1 year post

Biomassa residual para remoção de íons uranilo

Activities related to nuclear industry, production of phosphoric acid and hospitals have generated considerable volumes of radioactive waste containing uranyl ions. Banana pith was characterized by Scanning Electron Microscopy and Fourier Transform Infrared Spectroscopy and was investigated as a biosorbent for uranyl ions from nitric solutions by batch experiments. Influences of adsorbent size, kinetics and equilibrium adsorption were studied. The biosorption of the uranyl ions followed pseudo-second-order kinetics. The adsorption isotherm data were closely fitted to the Freundlich equation.

Production of silica gel from residual rice husk ash

This paper presents a study on the production of silica gel in hydrothermal process using residual rice husk ash. Measurements of the chemical composition, X-ray diffraction, infrared spectroscopy, particle size distribution, and pozzolanic activity were carried out in order to characterize the obtained material, and the optimal silica gel was selected for use as a mineral additive in cement pastes. The compressive strengths were determined for cement pastes containing silica gel (0.0, 2.5 or 5% by mass) in different times. The results indicate that the mixtures containing silica gel showed improved mechanical behavior over all time periods evaluated.

Identificação de adulteração de biocombustível por adição de óleo residual ao diesel por espectrofluorimetria total 3D e análise das componentes principais

Total spectrofluorimetry associated to Principal Components Analysis (PCA) were used to classify into different groups the samples of diesel oil, biodiesel, vegetal oil and residual oil, as well as, to identify addition of non-transesterified residual vegetable oil, instead of biodiesel, to the diesel oil. Using this method, the samples of diesel oil, mixtures of biodiesel in diesel and mixtures of residual oil in diesel were separated into well-defined groups.

Avaliação da eficiência das técnicas ESI-MS e ATR/FTIR na determinação de adulteração de BX com querosene e óleo residual

Direct infusion electrospray ionization mass spectrometry in the negative ion mode, ESI(-)-MS and Fourier transform infrared spectroscopy (FTIR) were used together with partial least squares (PLS) as a tool to determine B3 adulteration (B3 - mixture of 3% v/v of biodiesel in diesel) with kerosene and residual oil.

Otimização, validação e aplicação de método para determinação da concentração residual de difenoconazol em morangos após múltiplas aplicações

Difenoconazole residues in strawberry fruit cultivated in pots were estimated using the solid-liquid extraction with low temperature partition (SLE/LTP) method for sample preparation and gas chromatography with electron capture detection (GC/ECD) for analysis. The optimized method presented excellent recovery values from fortified samples and reproducibility (average recovery values ≥ 98%; CV values < 15%). Linearity of response was demonstrated (r = 0.995) with a detection limit of 9 µg kg-1. The method was successfully applied for the determination of difenoconazole residues in strawberries. Based on these results, the fungicide dissipates quickly, but the residual concentration increases after multiple applications.

Produção e caracterização de polihidroxialcanoatos obtidos por fermentação da glicerina bruta residual do biodiesel

The aim of this study was to evaluate the production of polyhydroxyalkanoates (PHAs) by fermentation of Crude Glycerin, a byproduct of the biodiesel industry, by Cupriavidus necator IPT 026, 027 and 028. The influence of fermentation time and temperature in shake flasks were evaluated. The highest PHA production (2.82 g L-1) occurred at 35 ºC for 72 h of fermentation. The melting and initial thermal degradation temperatures of this PHA were 177.9 ºC and 306.33 ºC, respectively, with 55% crystallinity. FTIR spectrum was similar to those reported in literature. The polymer obtained presented three different methyl esters of hydroxyalkanoates in its composition, with molecular weight of 630 kDa. Bacteria can use Crude Glycerin as an inexpensive substrate to produce value-added biodegradable products, such as PHA.

ATRIBUIÇÃO DA ESTEREOQUÍMICA DA α-SANTONINA ATRAVÉS DAS MEDIDAS DO ACOPLAMENTO DIPOLAR RESIDUAL

The measurement of nuclear magnetic resonance parameters in an anisotropic media, such as residual dipolar coupling (RDC), has proven to be an excellent methodology for the refinement of chemical structures, being used as a complementary tool in the determination of the relative configuration, conformation, and constitution of organic compounds. In this study, we applied this methodology to determine the relative configuration of α-santonin, a natural product with four stereocenters, while assigning its prochiral methylene protons using only the RDCs obtained in a polyacrylonitrile polymer gel swollen in DMSO-d6.

Efeito do conteúdo e da natureza da lignina residual na eficiência e na seletividade do branqueamento com ozônio

Neste estudo foram avaliados os efeitos do conteúdo e da natureza da lignina residual na eficiência e na seletividade do branqueamento com ozônio de polpa kraft convencional (kraft) e pré-deslignificada com oxigênio (kraft-O). Constatou-se que a eficiência do branqueamento com ozônio se eleva com o aumento do conteúdo de lignina residual da polpa. O tratamento com ozônio é mais seletivo para polpas kraft-O, mas para um mesmo tipo de polpa a seletividade de branqueamento com ozônio se eleva com o aumento de lignina residual. A eficiência do branqueamento com ozônio aumenta com o teor de lignina fenólica na polpa, entretanto a seletividade é negativamente afetada pela presença destas estruturas.

Efeitos da idade e classe diamétrica na deformação residual longitudinal em árvores de Eucalyptus dunnii maiden

O objetivo do trabalho foi avaliar os efeitos da idade e da classe diamétrica nos níveis das tensões de crescimento longitudinal em árvores de Eucalyptus dunnii oriundas de plantio comercial. O material avaliado foi procedente da Empresa Procopiak Compensados e Embalagens S.A., localizada no município de Canoinhas, Santa Catarina. Os níveis de tensão de crescimento foram mensurados indiretamente pelo método do "CIRAD-Forêt". Os resultados indicaram que os níveis da deformação residual longitudinal (DRL) apresentaram tendência de aumento linear com a idade. O efeito da classe diamétrica evidenciou correlação negativa com a DRL aos 8 e 13 anos de idade.

Estudos laboratoriais do comportamento de um solo residual arenoso reforçado com fibras de polipropileno, visando à aplicação em estradas florestais

Este trabalho teve como objetivo analisar o comportamento mecânico da mistura de um solo residual jovem de textura predominantemente arenosa reforçado com fibras de polipropileno, com vistas à aplicação em estradas florestais. Como ponto de partida, determinou-se, mediante os resultados de ensaios de compressão não-confinada, realizados em corpos-de-prova compactados na energia do ensaio Proctor Normal, que o quantitativo de 0,75% de fibras com 20 mm de comprimento foi a combinação responsável pelo maior ganho de resistência. Com a mistura solo-fibra composta por essa combinação, foram realizados ensaios triaxiais do tipo CID/Sat em corpos-de-prova compactados na energia anteriormente referida. Através desta pesquisa, foi possível avaliar: (i) a influência da variação da umidade nos parâmetros de resistência mecânica do solo e das misturas solo-fibra e (ii) a influência das fibras nos parâmetros de resistência ao cisalhamento do solo em estudo. Analisando os resultados, pôde-se concluir que o uso de fibras de polipropileno promoveu um ganho da ordem de 110% na resistência à compressão não-confinada e de 560% na coesão de intercepto do solo estudado.

ANÁLISE DA DEFORMAÇÃO RESIDUAL LONGITUDINAL E SUA RELAÇÃO COM PROPRIEDADES TECNOLÓGICAS DA MADEIRA DE ACÁCIA-NEGRA

RESUMOA madeira de acácia-negra tem sido utilizada em nichos que conferem pouco valor agregado à esse material. Diante disso, este trabalho teve como objetivo analisar as deformações residuais longitudinais (DRL) e suas relações com propriedades da madeira de Acacia mearnsii. Para tanto, foram selecionadas 60 árvores em plantios com idades distintas (4 e 7 anos) no Município de Piratini, RS. As características de crescimento avaliadas consistiram em diâmetro à altura do peito (1,3 m; DAP), espessura de casca (EP) e altura comercial (h). As propriedades físicas avaliadas massa específica básica (ρ) e teorde umidade à base seca (Tu). Já o tempo de propagação de onda ultrassonora foi determinado em conformidade com o procedimento NBR 15521. As propriedades mecânicas foram o módulo de elasticidade dinâmico (Ed), bem como as propriedades descritas no procedimento normativo D143-94, através dos ensaios de flexão estática, compressão paralela às fibras e Dureza Janka. ADRLesuas relações com as propriedades da madeira mostraram-se semelhantes aos resultados encontrados na literatura para a madeira de espécies do gênero Eucalyptus. No entanto, em magnitude, tais níveis se mostraram sensivelmente menores, conferindo à madeira de acácia-negra no que se refere a esse parâmetro de qualidade, indicação para a confecção de produtos sólidos.