Varioituvat moduulit liikuteltavissa murskauslaitoksissa

Tässä diplomityössä tutkitaan Metso Mineralsin moduuli- sekä tuoterakennemaailmaa. Työn tarkoituksena on löytää uusia mahdollisuuksia moduuli- ja tuoterakennemaailman kuvaamiseen sekä niiden hallitsemiseen. Työssä otetaan kantaa asioihin pääsääntöisesti moduulin näkökulmasta. Työssä määritellään kohdeyritystä parhaiten palveleva varioituvan moduulin periaatteellinen rakenne. Työssä annetaan moduulien uudelleenkäytön tehostamiseen sekä helpottamiseen tähtääviä ehdotuksia. Varioituvien moduulien näkökulmasta tarkastellaan nykyisiä tuoterakenneperiaatteita, ja ehdotetaan uutta tapaa lähestyä lopputuotteita. Varioituvien moduulien ja uusien tuoterakenteiden johtamiseen liittyvistä toimenpiteistä annetaan ehdotuksia, sekä määritellään niille omistajuudet. Työn lopputuloksena saadaan kokonaisvaltainen näkemys mahdollisesta tavasta nähdä ja hallita moduuli- ja tuoterakennemaailma.

The single principle of compositional data analysis, continuing fallacies, confusionsand misunderstandings and some suggested remedies

In any discipline, where uncertainty and variability are present, it is important to haveprinciples which are accepted as inviolate and which should therefore drive statisticalmodelling, statistical analysis of data and any inferences from such an analysis.Despite the fact that two such principles have existed over the last two decades andfrom these a sensible, meaningful methodology has been developed for the statisticalanalysis of compositional data, the application of inappropriate and/or meaninglessmethods persists in many areas of application. This paper identifies at least tencommon fallacies and confusions in compositional data analysis with illustrativeexamples and provides readers with necessary, and hopefully sufficient, arguments topersuade the culprits why and how they should amend their ways

THOMÉ RODRIGUES SOBRAL (1759-1829) E A VIRTUDE FEBRÍFUGA DE UM GRANDE NÚMERO DE QUINAS

AbstractIn the beginning of the 19th century, Portugal received from Brazil several barks that were used as cure for fevers for the purpose of chemical analysis. These analyses were intended to determine the principle compositional components responsible for the febrifuge power of these barks. At the University of Coimbra, the samples were analyzed under the supervision of Thomé Rodrigues Sobral, the Director of the university's Chemical Laboratory. In the interpretation of the obtained results, Sobral put forward his own ideas about the febrifuge principles of the analyzed barks in relation to their chemical composition. Here, we refer to both Rodrigues Sobral's reported results and his ideas about the febrifuge principle.

The purpose and use of passenger ships in 2058 - Future scenarios generated by the Delphi method

The purpose of the thesis is to generate scenarios of future purposes and of use of ships, suitable for STX Finland Cruise Oy to design and build, over a 50 year time span by applying the Delphi method and an open innovation approach in a future workshop. The scenarios were mapped out with help of two Delphi survey rounds and one future workshop. The number of participants in both surveys and the workshop was some twenty experts in each, representing various fields. On the basis of the first survey round, four different subject areas were selected for analysis: purposes for the use of ships; energy efficiency of cruises and ships; cost efficiency of sea transportation and vacation; and the views and expectations of the customers in the future. As a result of the future workshop, four different themes were established, which were studied further during the second Delphi round. The themes are future service and operation concepts; versatile uses of the space in ships; communication of environmental benefits of ships, future energy solutions and social interaction between passengers onboard. In addition to generating the scenarios, further aim of the thesis is to implement the Delphi method and workshop activity as foresight tools for STX Europe and to produce a chart of a future shipbuilding foresight community to can serve the open innovation processes in the maritime cluster as a whole.

Yhdenmiehen osakeyhtiö ja verotus - veroedullisuudesta, sivuuttamisesta ja sivuuttamisen oikeudenmukaisuudesta

Tämän tutkimuksen tarkoituksena oli tutkia yhdenmiehen osakeyhtiön sivuuttamista oikeudenmukaisuuden näkökulmasta. Vuosien saatossa osakeyhtiö on ollut yrittäjälle usein toimiva apuväline verokeinottelussa. Sivuuttamisen avulla tällaista keinottelua on pyritty estämään. Parin viime vuosikymmenen aikana instituution merkitys Suomen verojärjestelmässä on kuitenkin vähentynyt verokantojen laskiessa sekä veropohjien yhtenäistyessä ja nykyisellään osakeyhtiön avulla ei, eräitä erityistilanteita lukuun ottamatta, ole mahdollista veroetuja saavuttaa. Sivuuttamiseen liittyy oikeudenmukaisuusongelmia, jotka ovat pääosin johdettavissa siihen, että instituutio perustuu oikeuskäytäntöön. Instituution merkityksen vähentyessä monet aikaisemmassa oikeuskäytännössä olleissa ongelmista on kuitenkin korjaantunut kuin itsestään. Edelleen oikeudenmukaisuuskritiikkiä on mahdollista nostaa esiin sivuuttamisen ympärillä erityisesti oikeusvarmuuden ja maksukykyisyysperiaatteen osalta.

Utilization of a Time Domain Simulator in the Technical and Economic Analysis of a Wind Turbine Electric Drive Train

The amount of installed wind power has been growing exponentially during the past ten years. As wind turbines have become a significant source of electrical energy, the interactions between the turbines and the electric power network need to be studied more thoroughly than before. Especially, the behavior of the turbines in fault situations is of prime importance; simply disconnecting all wind turbines from the network during a voltage drop is no longer acceptable, since this would contribute to a total network collapse. These requirements have been a contributor to the increased role of simulations in the study and design of the electric drive train of a wind turbine. When planning a wind power investment, the selection of the site and the turbine are crucial for the economic feasibility of the installation. Economic feasibility, on the other hand, is the factor that determines whether or not investment in wind power will continue, contributing to green electricity production and reduction of emissions. In the selection of the installation site and the turbine (siting and site matching), the properties of the electric drive train of the planned turbine have so far been generally not been taken into account. Additionally, although the loss minimization of some of the individual components of the drive train has been studied, the drive train as a whole has received less attention. Furthermore, as a wind turbine will typically operate at a power level lower than the nominal most of the time, efficiency analysis in the nominal operating point is not sufficient. This doctoral dissertation attempts to combine the two aforementioned areas of interest by studying the applicability of time domain simulations in the analysis of the economicfeasibility of a wind turbine. The utilization of a general-purpose time domain simulator, otherwise applied to the study of network interactions and control systems, in the economic analysis of the wind energy conversion system is studied. The main benefits of the simulation-based method over traditional methods based on analytic calculation of losses include the ability to reuse and recombine existing models, the ability to analyze interactions between the components and subsystems in the electric drive train (something which is impossible when considering different subsystems as independent blocks, as is commonly done in theanalytical calculation of efficiencies), the ability to analyze in a rather straightforward manner the effect of selections other than physical components, for example control algorithms, and the ability to verify assumptions of the effects of a particular design change on the efficiency of the whole system. Based on the work, it can be concluded that differences between two configurations can be seen in the economic performance with only minor modifications to the simulation models used in the network interaction and control method study. This eliminates the need ofdeveloping analytic expressions for losses and enables the study of the system as a whole instead of modeling it as series connection of independent blocks with no lossinterdependencies. Three example cases (site matching, component selection, control principle selection) are provided to illustrate the usage of the approach and analyze its performance.

The harm principle and the greatest happiness principle: the missing link

In this article I present a possible solution for the classic problem of the apparent incompatibility between Mill's Greatest Happiness Principle and his Principle of Liberty arguing that in the other-regarding sphere the judgments of experience and knowledge accumulated through history have moral and legal force, whilst in the self-regarding sphere the judgments of the experienced people only have prudential value and the reason for this is the idea according to which each of us is a better judge than anyone else to decide what causes us pain and which kind of pleasure we prefer (the so-called epistemological argument). Considering that the Greatest Happiness Principle is nothing but the aggregate of each person's happiness, given the epistemological claim we conclude that, by leaving people free even to cause harm to themselves, we still would be maximizing happiness, so both principles (the Greatest Happiness Principle and the Principle of Liberty) could be compatible.

Analysis and Control of Excitation, Field Weakening and Stability in Direct Torque Controlled Electrically Excited Synchronous Motor Drives

Direct torque control (DTC) is a new control method for rotating field electrical machines. DTC controls directly the motor stator flux linkage with the stator voltage, and no stator current controllers are used. With the DTC method very good torque dynamics can be achieved. Until now, DTC has been applied to asynchronous motor drives. The purpose of this work is to analyse the applicability of DTC to electrically excited synchronous motor drives. Compared with asynchronous motor drives, electrically excited synchronous motor drives require an additional control for the rotor field current. The field current control is called excitation control in this study. The dependence of the static and dynamic performance of DTC synchronous motor drives on the excitation control has been analysed and a straightforward excitation control method has been developed and tested. In the field weakening range the stator flux linkage modulus must be reduced in order to keep the electro motive force of the synchronous motor smaller than the stator voltage and in order to maintain a sufficient voltage reserve. The dynamic performance of the DTC synchronous motor drive depends on the stator flux linkage modulus. Another important factor for the dynamic performance in the field weakening range is the excitation control. The field weakening analysis considers both dependencies. A modified excitation control method, which maximises the dynamic performance in the field weakening range, has been developed. In synchronous motor drives the load angle must be kept in a stabile working area in order to avoid loss of synchronism. The traditional vector control methods allow to adjust the load angle of the synchronous motor directly by the stator current control. In the DTC synchronous motor drive the load angle is not a directly controllable variable, but it is formed freely according to the motor’s electromagnetic state and load. The load angle can be limited indirectly by limiting the torque reference. This method is however parameter sensitive and requires a safety margin between the theoretical torque maximum and the actual torque limit. The DTC modulation principle allows however a direct load angle adjustment without any current control. In this work a direct load angle control method has been developed. The method keeps the drive stabile and allows the maximal utilisation of the drive without a safety margin in the torque limitation.

The relation between the general maxim of causality and the principle of uniformity in hume's theory of knowledge

ABSTRACT When Hume, in the Treatise on Human Nature, began his examination of the relation of cause and effect, in particular, of the idea of necessary connection which is its essential constituent, he identified two preliminary questions that should guide his research: (1) For what reason we pronounce it necessary that every thing whose existence has a beginning should also have a cause and (2) Why we conclude that such particular causes must necessarily have such particular effects? (1.3.2, 14-15) Hume observes that our belief in these principles can result neither from an intuitive grasp of their truth nor from a reasoning that could establish them by demonstrative means. In particular, with respect to the first, Hume examines and rejects some arguments with which Locke, Hobbes and Clarke tried to demonstrate it, and suggests, by exclusion, that the belief that we place on it can only come from experience. Somewhat surprisingly, however, Hume does not proceed to show how that derivation of experience could be made, but proposes instead to move directly to an examination of the second principle, saying that, "perhaps, be found in the end, that the same answer will serve for both questions" (1.3.3, 9). Hume's answer to the second question is well known, but the first question is never answered in the rest of the Treatise, and it is even doubtful that it could be, which would explain why Hume has simply chosen to remove any mention of it when he recompiled his theses on causation in the Enquiry concerning Human Understanding. Given this situation, an interesting question that naturally arises is to investigate the relations of logical or conceptual implication between these two principles. Hume seems to have thought that an answer to (2) would also be sufficient to provide an answer to (1). Henry Allison, in his turn, argued (in Custom and Reason in Hume, p. 94-97) that the two questions are logically independent. My proposal here is to try to show that there is indeed a logical dependency between them, but the implication is, rather, from (1) to (2). If accepted, this result may be particularly interesting for an interpretation of the scope of the so-called "Kant's reply to Hume" in the Second Analogy of Experience, which is structured as a proof of the a priori character of (1), but whose implications for (2) remain controversial.

Nurse-led interpersonal counselling for depressive symptoms in patients with myocardial infarction

The broad interest of this intervention study is in two worldwide remarkable diseases, myocardial infarction and depression. The purpose of the 18-month follow-up study was to evaluate the outcomes of interpersonal counselling implemented by a psychiatric nurse, and to examine the recovery experienced by the patients after myocardial infarction. The interpersonal counseling consisted of a short-term (max 6 sessions) depression-focused intervention modified for myocardial infarction patients. The main principle of interpersonal counselling is that depressive symptoms relate to interpersonal relations. The measured outcomes of the intervention consisted of changes in depressive symptoms and distress, health-related quality of life and the use of health care services. The data consisted of 103 patients with acute myocardial infarction and with sufficient knowledge of Finnish language, and they were randomized into intervention group (n=51) and control group (n=52) with standard care. Depressive symptoms were measured using Beck Depression Inventory, and distress using Symptom Checklist-25. The instrument to measure health-related quality of life was EuroQol-5 Dimensions. All instruments were used at three measurements: in hospital, at 6 months and at 18 months after hospital discharge. The Use of Health Care Services questionnaire was used during the 6- and 18-month period after hospital discharge. In addition, satisfaction with the intervention and with information received from the health-care professional was evaluated during the follow-up. To examine recovery, the patients kept diaries during a 6-month period and they were interviewed at 18 months after myocardial infarction. The number of patients with depressive symptoms decreased significantly more in the intervention group compared with the control group during 18 months of follow-up. Distress decreased significantly more among patients under 60 years in the intervention group than in the control group, but the difference was not significant between the groups. No differences in the changes of health-related quality of life were found between the groups during follow-up. However, in the group of patients under 60 years, the improvement of health-related quality of life in the intervention was significantly better in the intervention group compared with the control group during the follow-up. During the follow-up period, there was even a decline in the use of somatic specialized health care services in the intervention group and among intervention patients who had no other long-term disease. Considering recovery experienced by the patients, main categories including many supporting and inhibiting factors and subcategories were identified: clinical and physical, psychological, social, functional and professional category. No differences between the groups were found in satisfaction with information received from the professionals. The brief and easy-to-learn intervention, with which the patients were satisfied, seems to decrease depressive symptoms after myocardial infarction. Interpersonal counselling seems to be beneficial especially with younger patients. These results justify adopting depression screening and interpersonal counselling as part of routine care after myocardial infarction. The first stage evaluation of the use of health care services is interesting, and calls for more studies. From the perspective of individual patients, recovery after myocardial infarction seems to consist of many supporting and inhibiting factors. This is something that is important to take into account in developing nursing practice. The results indicate a need for further studies in outcomes of interpersonal counselling and recovery experienced by the patients after myocardial infarction. In addition, the results encourage widening the research perspective to nursing administration and educational level.

Atomikerroskasvatuksen soveltaminen kemiantekniikassa

Tässä kirjallisuustyössä tutkittiin atomikerroskasvatuksen (ALD) soveltamista kemiantekniikassa. Työn alussa kerrottiin atomikerroskasvatuksesta, sen toimintaperiaatteista ja prosessitekniikasta. Tämän jälkeen tutkittiin viittä eri kemiantekniikan sovellusta, jotka olivat polymeerien pinnoittaminen, heterogeenisten katalyyttien syntetisointi, membraanien modifiointi, korroosionesto ja kaasunilmaisimet. ALD on ohutkalvotekniikka, jolla voidaan valmistaa nanometrin tai jopa Ångströmin (1 Å = 0.1 nm) tarkkuudella epäorgaanisia materiaalikerroksia, jotka yleensä ovat metallioksideja, kuten alumiinioksidi. ALD perustuu kaasu-kiintoainereaktioihin, joissa kaasumaiset kemialliset prekursorit reagoivat vuorotellen kasvualustan kanssa. Tyypilliset prekursorit ovat metalliligandi ja vesi, joka on yleisin hapen lähde ALD-reaktioissa. ALD−reaktiot suoritetaan yleensä matalassa paineessa (100−200 Pa) ja korkeassa lämpötilassa (200–400 °C) suljetussa reaktorikammiossa. ALD-prosesseissa voidaan hyödyntää myös plasmaa alentamaan reaktiolämpötiloja. Plasman avulla prekursoreista luodaan hyvin reaktiivisia radikaaleja, jotka voivat reagoida jopa huoneenlämmössä. Lämpöherkkiä polymeerejä voidaan pinnoittaa ohutkalvoilla, joilla voidaan lisätä esimerkiksi pakkausmateriaalien suojaa happea ja vesihöyryä vastaan. ALD:llä voidaan syntetisoida tarkasti nanomittakaavan heterogeenisiä katalyyttejä, joilla on korkea dispersio tukimateriaalin pinnalla. ALD:n avulla voidaan säästää katalyyttimateriaalia menettämättä katalyytin aktiivisuutta, mikä on tärkeää monien katalyyttisovellusten taloudellisuuden kannalta, esimerkiksi polttokennot. ALD soveltuu hyvin membraanien modifiointiin, koska kaasumaiset prekursorit leviävät tasaisesti membraanin huokosiin. Membraanien pinnoittamisella pyritään vaikuttamaan, selektiivisyyteen, hydrofiilisyyteen, liuotinkestävyyteen, huokoskokoon ja sen jakaumaan. Lisäksi membraaneja voidaan pinnoittaa katalyyttisillä ohutkalvoilla, mikä on tärkeää nanoreaktoreiden kehityksen kannalta. ALD:llä voidaan pinnoittaa esimerkiksi terästä, ja vähentää täten teräksen korroosiota. Puolijohtavia metallioksideja voidaan käyttää kaasunilmaisimina, joiden valmistuksessa ALD:n tarkkuudesta on suurta hyötyä.

Georeferenced database generation with the purpose of hydrologic molding in reservoirs of the hydrographic basin of Jaguaribe river in the state of Ceará, Brazil

The edafoclimatic conditions of the Brazilian semiarid region favor the water loss by surface runoff. The state of Ceará, almost completely covered by semiarid, has developed public policies for the construction of dams in order to attend the varied water demand. Several hydrological models were developed to support decisive processes in the complex management of reservoirs. This study aimed to establish a methodology for obtaining a georeferenced database suitable for use as input data in hydrological modeling in the semiarid of Ceará. It was used images of Landsat satellite and SRTM Mission, and soil maps of the state of Ceará. The Landsat images allowed the determination of the land cover and the SRTM Mission images, the automatic delineation of hydrographic basins. The soil type was obtained through the soil map. The database was obtained for Jaguaribe River hydrographic basin, in the state of Ceará, and is applicable to hydrological modeling based on the Curve Number method for estimating the surface runoff.

Evaluation of cotton stalks destroyers

The destruction of the cotton crop residues (cotton stalks) is a mandatory procedure in Brazil for prophylactic issues, but is a subject unexplored by the research and there are few studies that deal with this issue. However, this is not encouraged in recent decades, studies aimed at developing and evaluating equipment for this purpose. The present study had the objective to evaluate six methods for mechanical destruction of cotton crop residues. Each method was defined based on the principle of operation of the active parts of the equipment, which were tested in medium texture soil and in a clayey one. The variables used to evaluate the efficiency of the equipment were the regrowth rate, the theoretical field capacity and energy demand. The equipment with convergent concave disks (DCC) and flat cutters discs from manufacturer A (CPS-a) showed the best results in cotton stalks destruction in both soil types. The harrow disc (GPD) was efficient only in clay soil. It was concluded that the equipment with convergent concave disks, among those tested, was the most efficient to destroy cotton stalks, regardless of soil type, and that the harrow disc was not included among the best performers.

Influence of distance, geometry and number of control stations on quality of local geodetic networks for the purpose of georeferencing of rural properties

The implementation of local geodetic networks for georeferencing of rural properties has become a requirement after publication of the Georeferencing Technical Standard by INCRA. According to this standard, the maximum distance of baselines to GNSS L1 receivers is of 20 km. Besides the length of the baseline, the geometry and the number of geodetic control stations are other factors to be considered in the implementation of geodetic networks. Thus, this research aimed to examine the influence of baseline lengths higher than the regulated limit of 20 km, the geometry and the number of control stations on quality of local geodetic networks for georeferencing, and also to demonstrate the importance of using specific tests to evaluate the solution of ambiguities and on the quality of the adjustment. The results indicated that the increasing number of control stations has improved the quality of the network, the geometry has not influenced on the quality and the baseline length has influenced on the quality; however, lengths higher than 20 km has not interrupted the implementation, with GPS L1 receiver, of the local geodetic network for the purpose of georeferencing. Also, the use of different statistical tests, both for the evaluation of the resolution of ambiguities and for the adjustment, have enabled greater clearness in analyzing the results, which allow that unsuitable observations may be eliminated.