New tools for cognitive and motor rehabilitation: development and clinical validation

Nervous system disorders are associated with cognitive and motor deficits, and are responsible for the highest disability rates and global burden of disease. Their recovery paths are vulnerable and dependent on the effective combination of plastic brain tissue properties, with complex, lengthy and expensive neurorehabilitation programs. This work explores two lines of research, envisioning sustainable solutions to improve treatment of cognitive and motor deficits. Both projects were developed in parallel and shared a new sensible approach, where low-cost technologies were integrated with common clinical operative procedures. The aim was to achieve more intensive treatments under specialized monitoring, improve clinical decision-making and increase access to healthcare. The first project (articles I – III) concerned the development and evaluation of a web-based cognitive training platform (COGWEB), suitable for intensive use, either at home or at institutions, and across a wide spectrum of ages and diseases that impair cognitive functioning. It was tested for usability in a memory clinic setting and implemented in a collaborative network, comprising 41 centers and 60 professionals. An adherence and intensity study revealed a compliance of 82.8% at six months and an average of six hours/week of continued online cognitive training activities. The second project (articles IV – VI) was designed to create and validate an intelligent rehabilitation device to administer proprioceptive stimuli on the hemiparetic side of stroke patients while performing ambulatory movement characterization (SWORD). Targeted vibratory stimulation was found to be well tolerated and an automatic motor characterization system retrieved results comparable to the first items of the Wolf Motor Function Test. The global system was tested in a randomized placebo controlled trial to assess its impact on a common motor rehabilitation task in a relevant clinical environment (early post-stroke). The number of correct movements on a hand-to-mouth task was increased by an average of 7.2/minute while the probability to perform an error decreased from 1:3 to 1:9. Neurorehabilitation and neuroplasticity are shifting to more neuroscience driven approaches. Simultaneously, their final utility for patients and society is largely dependent on the development of more effective technologies that facilitate the dissemination of knowledge produced during the process. The results attained through this work represent a step forward in that direction. Their impact on the quality of rehabilitation services and public health is discussed according to clinical, technological and organizational perspectives. Such a process of thinking and oriented speculation has led to the debate of subsequent hypotheses, already being explored in novel research paths.

Development of project management procedures for customer project business

Objective of the thesis is to develop project management procedure for chilled beam projects. In organization is recognized that project management techniques could help in large and complex projects. Information sharing have been challenging in projects, so improvement of information sharing is one key topic of the thesis. Academic researches and literature are used to find suitable project management theories and methods. Main theories are related to phases of the project and project management tools. Practical knowledge of project management is collected from two project business oriented companies. Project management tools are chosen and modified to fulfill needs of the beam projects. Result of the thesis is proposed project management procedure, which includes phases of the chilled beam projects and project milestones. Project management procedure helps to recognize the most critical phases of the project and tools help to manage information of the project. Procedure increases knowledge of the project management techniques and tools. It also forms coherent project management working method among the chilled beam project group.

EasyInterface: a toolkit for the rapid development of GUIs for research prototype tools

During the lifetime of a research project, different partners develop several research prototype tools that share many common aspects. This is equally true for researchers as individuals and as groups: during a period of time they often develop several related tools to pursue a specific research line. Making research prototype tools easily accessible to the community is of utmost importance to promote the corresponding research, get feedback, and increase the tools’ lifetime beyond the duration of a specific project. One way to achieve this is to build graphical user interfaces (GUIs) that facilitate trying tools; in particular, with web-interfaces one avoids the overhead of downloading and installing the tools. Building GUIs from scratch is a tedious task, in particular for web-interfaces, and thus it typically gets low priority when developing a research prototype. Often we opt for copying the GUI of one tool and modifying it to fit the needs of a new related tool. Apart from code duplication, these tools will “live” separately, even though we might benefit from having them all in a common environment since they are related. This work aims at simplifying the process of building GUIs for research prototypes tools. In particular, we present EasyInterface, a toolkit that is based on novel methodology that provides an easy way to make research prototype tools available via common different environments such as a web-interface, within Eclipse, etc. It includes a novel text-based output language that allows to present results graphically without requiring any knowledge in GUI/Web programming. For example, an output of a tool could be (a structured version of) “highlight line number 10 of file ex.c” and “when the user clicks on line 10, open a dialog box with the text ...”. The environment will interpret this output and converts it to corresponding visual e_ects. The advantage of using this approach is that it will be interpreted equally by all environments of EasyInterface, e.g., the web-interface, the Eclipse plugin, etc. EasyInterface has been developed in the context of the Envisage [5] project, and has been evaluated on tools developed in this project, which include static analyzers, test-case generators, compilers, simulators, etc. EasyInterface is open source and available at GitHub2.

VIVALDI, A H2020 European Project aiming at preventing and mitigating farmed bivalve diseases

The European shellfish industry enjoys a privileged position on the global scene. Its social dimension is essential, as it employs a high number of people in more than 8000 companies, mostly micro-companies. Shellfish production in Europe is little diversified and mainly relies on the industrially produced mussels, oysters and clams. Over the recent years, this sector has grown more slowly than other fish farming sectors, notably because it depends a great deal on the environmental quality and the emergence of diseases. Mortality events, linked to pathogen organisms such as viruses, bacteria and parasites (protozoa), tend to weaken the production’s sustainability. In this context, the European project VIVALDI (PreVenting and mItigating farmed biVALve DIseases) aims at increasing the sustainability and competitiveness of the shellfish industry in Europe, developing tools and approaches with a view to better preventing and controlling marine bivalve diseases. VIVALDI is a 4-years European Horizon 2020 project coordinated by Ifremer (2016-2020): 21 mostly European, public and private partners are involved, representing the diversity of the European shellfish industry landscape

O museu virtual Google Art Project : um estudo de caso em contexto de ensino-aprendizagem da educação visual

A educação na arte e pela arte confere a todos os seus intervenientes a estimulação da sua criatividade e da sua consciência cultural, proporcionando meios para se exprimirem e participarem ativamente no mundo que nos rodeia. A integração das tecnologias de informação e comunicação no processo de ensino-aprendizagem veio alargar o papel que a arte pode desempenhar neste processo, promovendo novas formas de aprender, de ensinar e de pensar. Assim, a utilização de ambientes virtuais em contexto educativo tem revelado um enorme potencial, sobretudo ao nível da comunicação e da interação entre alunos e obras de arte. Neste sentido, considerou-se importante desenvolver um estudo de caso em contexto de sala de aula da Educação Visual, promovendo uma aprendizagem baseada na articulação entre a observação, interpretação e análise da obra de arte e o museu virtual. Assim o principal objetivo deste estudo foi avaliar as potencialidades do Google Art Project, enquanto objeto de aprendizagem, na promoção da aprendizagem na área da literacia em artes. Para além disso, procurámos ainda avaliar se a utilização de ferramentas multimédia como o referido Google Art Project e o Quadro Interativo, constituem fatores de motivação na aprendizagem da disciplina de Educação Visual. Do ponto de vista metodológico desenvolvemos uma estratégia baseada na investigação-ação. Procurámos, por um lado, descobrir e compreender o significado de uma realidade vivida por um grupo de alunos e, por outro lado, refletir sobre a prática educativa com o intuito de a melhorar e transformar. Este estudo envolveu cinco turmas do sexto ano do ensino público. Para a recolha de dados utilizámos técnicas baseadas na conversação e na observação, no questionário e nas notas de campo. Os resultados deste estudo revelam que as ferramentas tecnológicas utilizadas podem efetivamente contribuir para a promoção da aprendizagem dos alunos na área da Educação Visual, mais concretamente ao nível do domínio da literacia artística, da representação e da interpretação visual.

CHARACTERIZATION OF THERMAL AND MECHANICAL PROPERTIES OF POLYPROPYLENE–BASED COMPOSITES FOR FUEL CELL BIPOLAR PLATES AND DEVELOPMENT OF EDUCATIONAL TOOLS IN HYDROGEN AND FUEL CELL TECHNOLOGIES

In this project we developed conductive thermoplastic resins by adding varying amounts of three different carbon fillers: carbon black (CB), synthetic graphite (SG) and multi–walled carbon nanotubes (CNT) to a polypropylene matrix for application as fuel cell bipolar plates. This component of fuel cells provides mechanical support to the stack, circulates the gases that participate in the electrochemical reaction within the fuel cell and allows for removal of the excess heat from the system. The materials fabricated in this work were tested to determine their mechanical and thermal properties. These materials were produced by adding varying amounts of single carbon fillers to a polypropylene matrix (2.5 to 15 wt.% Ketjenblack EC-600 JD carbon black, 10 to 80 wt.% Asbury Carbons’ Thermocarb TC-300 synthetic graphite, and 2.5 to 15 wt.% of Hyperion Catalysis International’s FIBRILTM multi-walled carbon nanotubes) In addition, composite materials containing combinations of these three fillers were produced. The thermal conductivity results showed an increase in both through–plane and in–plane thermal conductivities, with the largest increase observed for synthetic graphite. The Department of Energy (DOE) had previously set a thermal conductivity goal of 20 W/m·K, which was surpassed by formulations containing 75 wt.% and 80 wt.% SG, yielding in–plane thermal conductivity values of 24.4 W/m·K and 33.6 W/m·K, respectively. In addition, composites containing 2.5 wt.% CB, 65 wt.% SG, and 6 wt.% CNT in PP had an in–plane thermal conductivity of 37 W/m·K. Flexural and tensile tests were conducted. All composite formulations exceeded the flexural strength target of 25 MPa set by DOE. The tensile and flexural modulus of the composites increased with higher concentration of carbon fillers. Carbon black and synthetic graphite caused a decrease in the tensile and flexural strengths of the composites. However, carbon nanotubes increased the composite tensile and flexural strengths. Mathematical models were applied to estimate through–plane and in–plane thermal conductivities of single and multiple filler formulations, and tensile modulus of single–filler formulations. For thermal conductivity, Nielsen’s model yielded accurate thermal conductivity values when compared to experimental results obtained through the Flash method. For prediction of tensile modulus Nielsen’s model yielded the smallest error between the predicted and experimental values. The second part of this project consisted of the development of a curriculum in Fuel Cell and Hydrogen Technologies to address different educational barriers identified by the Department of Energy. By the creation of new courses and enterprise programs in the areas of fuel cells and the use of hydrogen as an energy carrier, we introduced engineering students to the new technologies, policies and challenges present with this alternative energy. Feedback provided by students participating in these courses and enterprise programs indicate positive acceptance of the different educational tools. Results obtained from a survey applied to students after participating in these courses showed an increase in the knowledge and awareness of energy fundamentals, which indicates the modules developed in this project are effective in introducing students to alternative energy sources.

FOCUS : frailty management optimisation through EIPAHA commitments and utilisation of stakeholders’ input – an innovative European project in elderly care

The goal of FOCUS, which stands for Frailty Management Optimization through EIPAHA Commitments and Utilization of Stakeholders’ Input, is to reduce the burden of frailty in Europe. The partners are working on advancing knowledge of frailty detection, assessment, and management, including biological, clinical, cognitive and psychosocial markers, in order to change the paradigm of frailty care from acute intervention to prevention. FOCUS partners are working on ways to integrate the best available evidence from frailty-related screening tools, epidemiological and interventional studies into the care of frail people and their quality of life. Frail citizens in Italy, Poland and the UK and their caregivers are being called to express their views and their experiences with treatments and interventions aimed at improving quality of life. The FOCUS Consortium is developing pathways to leverage the knowledge available and to put it in the service of frail citizens. In order to reach out to the broadest audience possible, the FOCUS Platform for Knowledge Exchange and the platform for Scaling Up are being developed with the collaboration of stakeholders. The FOCUS project is a development of the work being done by the European Innovation Partnership on Active and Healthy Ageing (EIPAHA), which aims to increase the average healthy lifespan in Europe by 2020 while fostering sustainability of health/social care systems and innovation in Europe. The knowledge and tools developed by the FOCUS project, with input from stakeholders, will be deployed to all EIPAHA participants dealing with frail older citizens to support activities and optimize performance.

Integration of a graph-based model indexer in commercial modelling tools

Softeam has over 20 years of experience providing UML-based modelling solutions, such as its Modelio modelling tool, and its Constellation enterprise model management and collaboration environment. Due to the increasing number and size of the models used by Softeam’s clients, Softeam joined the MONDO FP7 EU research project, which worked on solutions for these scalability challenges and produced the Hawk model indexer among other results. This paper presents the technical details and several case studies on the integration of Hawk into Softeam’s toolset. The first case study measured the performance of Hawk’s Modelio support using varying amounts of memory for the Neo4j backend. In another case study, Hawk was integrated into Constellation to provide scalable global querying of model repositories. Finally, the combination of Hawk and the Epsilon Generation Language was compared against Modelio for document generation: for the largest model, Hawk was two orders of magnitude faster.

Climate Adaptation Finance Mechanisms: New Frontiers For Familiar Tools

Demands for mechanisms to pay for adaptation to climate risks have multiplied rapidly as concern has shifted from greenhouse gas mitigation alone to also coping with the now-inevitable impacts. A number of viable approaches to how to pay for those adjustments to roads, drainage systems, lifeline utilities and other basic infrastructure are emerging, though untested at the scale required across the nation, which already has a trillion-dollar deferred maintenance and replacement problem. There are growing efforts to find new ways to harness private financial resources via new market arrangements to meet needs that clearly outstrip public resources alone, as well as to utilize and combine public resources more effectively. To date, mechanisms are often seen through a specific lens of scale, time, and method, for example national versus local and public versus market-based means. The purpose here is to integrate a number of those perspectives and also to highlight the following in particular. Current experience with seemingly more pedestrian needs like stormwater management funding is in fact a learning step towards new approaches for broader adaptation needs, using re-purposed but existing fiscal tools. The resources raised from new large-scale market approaches for using catastrophe- and resiliency-bond-derived funds will have their use embodied and operationalized in many separate local and state projects. The invention and packaging of innovative projects—the pre-development phase—will be pivotal to better using fiscal resources of many types. Those efforts can be greatly aided or hindered by larger national and especially state government policy, regulatory and capital market arrangements. Understanding the path to integration of effort across these scales deserves much more attention. Examples are given of how federal, state and local roles are each dimensions of that frontier, how existing tools can apply in new ways and how smart project creation plays a role.

Practical Management of the Endangered African Wild Dog (Lycaon Pictus): Implementation of Research Methodologies, Management Tools and Validation of Non-Invasive Endocrinology Applications

The porpoise of this study was to implement research methodologies and assess the effectiveness and impact of management tools to promote best practices for the long term conservation of the endangered African wild dog (Lycaon pictus). Different methods were included in the project framework to investigate and expand the applicability of these methodologies to free-ranging African wild dogs in the southern African region: ethology, behavioural endocrinology and ecology field methodologies were tested and implemented. Additionally, research was performed to test the effectiveness and implication of a contraceptive implant (Suprenolin) as a management tool for the species of a subpopulation hosted in fenced areas. Attention was especially given to social structure and survival of treated packs. This research provides useful tools and advances the applicability of these methods for field studies, standardizing and improving research instruments in the field of conservation biology and behavioural endocrinology. Results reported here provide effective methodologies to expand the applicability of non-invasive endocrine assessment to previously prohibited fields, and validation of sampling methods for faecal hormone analysis. The final aim was to fill a knowledge gap on behaviours of the species and provide a common ground for future researchers to apply non-invasive methods to this species research and to test the effectiveness of the contraception on a managed metapopulation.

Machine learning tools for protein annotation: the cases of transmembrane β-barrel and myristoylated proteins

Biology is now a “Big Data Science” thanks to technological advancements allowing the characterization of the whole macromolecular content of a cell or a collection of cells. This opens interesting perspectives, but only a small portion of this data may be experimentally characterized. From this derives the demand of accurate and efficient computational tools for automatic annotation of biological molecules. This is even more true when dealing with membrane proteins, on which my research project is focused leading to the development of two machine learning-based methods: BetAware-Deep and SVMyr. BetAware-Deep is a tool for the detection and topology prediction of transmembrane beta-barrel proteins found in Gram-negative bacteria. These proteins are involved in many biological processes and primary candidates as drug targets. BetAware-Deep exploits the combination of a deep learning framework (bidirectional long short-term memory) and a probabilistic graphical model (grammatical-restrained hidden conditional random field). Moreover, it introduced a modified formulation of the hydrophobic moment, designed to include the evolutionary information. BetAware-Deep outperformed all the available methods in topology prediction and reported high scores in the detection task. Glycine myristoylation in Eukaryotes is the binding of a myristic acid on an N-terminal glycine. SVMyr is a fast method based on support vector machines designed to predict this modification in dataset of proteomic scale. It uses as input octapeptides and exploits computational scores derived from experimental examples and mean physicochemical features. SVMyr outperformed all the available methods for co-translational myristoylation prediction. In addition, it allows (as a unique feature) the prediction of post-translational myristoylation. Both the tools here described are designed having in mind best practices for the development of machine learning-based tools outlined by the bioinformatics community. Moreover, they are made available via user-friendly web servers. All this make them valuable tools for filling the gap between sequential and annotated data.

New knowledge, diagnostic and control tools to limit the impact of viral nervous necrosis (VNN) in the Mediterranean aquaculture sector

The role of aquaculture in satisfying the global seafood demand is essential. The expansion of the aquaculture sector and the intensification of its activities have enhanced the circulation of infectious agents. Among these, the nervous necrosis virus (NNV) represents the most widespread in the Mediterranean basin. The NNV is responsible for a severe neuropathological condition named viral nervous necrosis (VNN), impacting hugely on fish farms due to the serious disease-associated losses. Therefore, it is fundamental to develop new strategies to limit the impact of VNN in this area, interconnecting several aspects of disease management, diagnosis and prevention. This PhD thesis project, focusing on aquatic animals’ health, deals with these topics. The first two chapters expand the knowledge on VNN epidemiology and distribution, showing the possibility of interspecies transmission, persistent infections and a potential carrier role for invertebrates. The third study expands the horizon of VNN diagnosis, by developing a quick and affordable multiplex RT-PCR able to detect and simultaneously discriminate between NNV variants, reducing considerably the time and costs of genotyping. The fourth study, with the development of a fluorescent in situ hybridization technique and its application to aquatic vertebrates and invertebrates’ tissues, contributes to expand the knowledge on NNV distribution at cellular level, localizing also the replication site of the virus. Finally, the last study dealing with an in vitro evaluation of the NNV susceptibility to a commercial biocide, stress the importance to implement proper disinfectant procedures in fish farms to prevent virus spread and disease outbreaks.

Red flesh fruit in european pear (Pyrus communis): genetic sources, QTLs, candidate genes and tools for breeding

Red flesh fruit is a character which interest is increasing in several commercial species. Following a review of the research on the biosynthesis and accumulation of anthocyanin in pears (Chapter 1) the general aim of the project is reported in Chapter 2. Chapter 3 reports the results of a molecular analysis of 33 red-fleshed pear accessions, genotyped with 18 SSR markers with the aim of improving germplasm conservation strategies to support ongoing breeding programs. The molecular profiles revealed both cases of synonymy and homonymy and 6 unique genotypes were identified. The S-allele were established to highlight the genetic relationships among these landraces. Four of the unique genotypes have been clustered based on pomological data. In the Chapter 4, the work was directed to identify the putative genomic regions involved in the appearance of this character in pear fruit. A crossing population (‘Carmen’ x ‘Cocomerina Precoce’) segregating for the trait was phenotyped for 2 consecutive years and used for QTL analysis. A strong QTL was identified in a small genomic region related to the red flesh fruit trait at 27 Mb from the start of LG5. Two candidate genes were detected in this genomic region: ‘PcMYB114’ and ‘PcABCC2’. SSR marker SSR114 was found able to detect the red flesh phenotype segregation in all the red-fleshed pear accessions and segregating progenies tested. Chapter 5 focuses on examining the trend of anthocyanin synthesis and accumulation during the fruit development, from fruit set to ripening time. Three different trials were planned: qPCR and HPLC methods were performed to correlate the genes expression with the anthocyanin accumulation in ‘Cocomerina Precoce’ and six progenies. Total transcriptome sequencing was used to compare the differential genes expression between red and white-fleshed fruit. Chapter 6 reviews and analyses all the earlier study findings while providing new potential future perspectives.

Quantum Dots As Biophotonics Tools.

This chapter provides a short review of quantum dots (QDs) physics, applications, and perspectives. The main advantage of QDs over bulk semiconductors is the fact that the size became a control parameter to tailor the optical properties of new materials. Size changes the confinement energy which alters the optical properties of the material, such as absorption, refractive index, and emission bands. Therefore, by using QDs one can make several kinds of optical devices. One of these devices transforms electrons into photons to apply them as active optical components in illumination and displays. Other devices enable the transformation of photons into electrons to produce QDs solar cells or photodetectors. At the biomedical interface, the application of QDs, which is the most important aspect in this book, is based on fluorescence, which essentially transforms photons into photons of different wavelengths. This chapter introduces important parameters for QDs' biophotonic applications such as photostability, excitation and emission profiles, and quantum efficiency. We also present the perspectives for the use of QDs in fluorescence lifetime imaging (FLIM) and Förster resonance energy transfer (FRET), so useful in modern microscopy, and how to take advantage of the usually unwanted blinking effect to perform super-resolution microscopy.

Guidelines On The Treatment Of Anemia Of Chronic Renal Failure Using Recombinant Human Erythropoietin: Associação Brasileira De Hematologia, Hemoterapia E Terapia Celular Guidelines Project: Associação Médica Brasileira - 2014.

36