Simultaneous analysis of free amino acids and biogenic amines in honey and wine samples using in loop orthophthalaldeyde derivatization procedure

This work presents a RP-HPLC method for the simultaneous quantification of free amino acids and biogenic amines in liquid food matrices and the results of the application to honey and wine samples obtained from different production processes and geographic origins. The developed methodology is based on a pre-column derivatization with o-phthaldialdehyde carried out in the sample injection loop. The compounds were separated in a Nova-Pack RP-C18 column (150 mm × 3.9 mm, 4 μm) at 35 °C. The mobile phase used was a mixture of phase A: 10 mM sodium phosphate buffer (pH 7.3), methanol and tetrahydrofuran (91:8:1); and phase B: methanol and phosphate buffer (80:20), with a flow rate of 1.0 ml/min. Fluorescence detection was used at an excitation wavelength of 335 nm and an emission wavelength of 440 nm. The separation and quantification of 19 amino acids and 6 amines was carried out in a single run as their OPA/MCE derivatives elute within 80 min, ensuring a reproducible quantification. The method showed to be adequate for the purpose, with an average RSD of 2% for the different amino acids; detection limits varying between 0.71 mg/l (Asn) and 8.26 mg/l (Lys) and recovery rates between 63.0% (Cad) and 98.0% (Asp). The amino acids present at the highest concentration in honey and wine samples were phenylalanine and arginine, respectively. Only residual levels of biogenic amines were detected in the analysed samples.

Apoio governamental à inovação Tecnológica: análise da indústria farmacêutica paraense

The transformations economical, cultural and social that happen in world ambit they are associated to the intense progress and expansion of new technologies, forcing governments, people, companies and nations to the introduction of new patterns of behavior, forcing, in that way, to the continuous renewal of products and technological processes to maintain the competitiveness, so much among nations, as in the managerial world. In that matter, the technological innovation is recognized as basic factor of maintainable economical competitiveness, being the responsible for the breaking and/or improvement of the techniques and production processes, what presupposes the systematization varied institutional arrangements that they involve firms, interaction nets among companies, government agencies, universities, research institutes, laboratories of companies and scientists and engineers activities. Those arrangements, to the if they articulate with the educational system, with the industrial and managerial section and, also, with the financial institutions, they take the form that Freeman (1987) it coined of national system of innovation, promoted through public politics of CT&I, which seek to induce and to support innovative initiatives in the companies, as well as to establish demands and to prioritize vocations and regional potentialities. In that context of government support to the technological innovation interferes this study, that it looked for to know the reasons of the fragility innovative in the pharmaceutical industry of State of Pará in Brazil, pointed for PINTEC (2005), starting from the point of view of the businessmen of that section. For such, the qualitative approach was used - with interviews directing semi and the technique of the content analysis. The results of the research pointed that the fragilities innovative of the section links to the ignorance of the government support to the technological innovation on the part of the businessmen of the pharmaceutical industry of State of Pará in Brazil

Síntese e caracterização de ferrita ni-zn pelo método dos precursores poliméricos calcinada por energia de microondas

Magnetic ceramics have been widely investigated, especially with respect to intrinsic and extrinsic characteristics of these materials. Among the magnetic ceramic materials of technological interest, there are the ferrites. On the other hand, the thermal treatment of ceramic materials by microwave energy has offered various advantages such as: optimization of production processes, high heat control, low consumption of time and energy among others. In this work were synthesized powders of Ni-Zn ferrite with compositions Ni1- xZnxFe2O4 (0.25 ≤ x ≤ 0.75 mols) by the polymeric precursor route in two heat treatment conditions, conventional oven and microwave energy at 500, 650, 800 and 950°C and its structural, and morphological imaging. The materials were characterized by thermal analysis (TG/ DSC), X-ray diffraction (XRD), absorption spectroscopy in the infrared (FTIR), scanning electron microscopy (SEM), X-ray spectroscopy and energy dispersive (EDS) and vibrating sample magnetometry (VSM). The results of X-ray diffraction confirmed the formation of ferrite with spinel-type cubic structure. The extrinsic characteristics of the powders obtained by microwave calcination and influence significantly the magnetic behavior of ferrites, showing particles ferrimagnéticas characterized as soft magnetic materials (soft), is of great technological interest. The results obtained led the potential application of microwave energy for calcining powders of Ni-Zn ferrite

Estudo de adsorvente obtido de terras diatomáceas para remoção de metais pesados em águas produzidas: processamento, caracterização e dinâmica em leito fixo

The acceleration of industrial growth in recent decades on all continents aroused the interest of the companies to counter the impacts produced on the environment, spurred primarily by major disasters in the petroleum industry. In this context, the water produced is responsible for the largest volume of effluent from the production and extraction of oil and natural gas. This effluent has in its composition some critical components such as inorganic salts, heavy metals (Fe, Cu, Zn, Pb, Cd, ), presence of oil and chemicals added in the various production processes. In response to impact, have been triggered by research alternative adsorbent materials for water treatment and water produced, in order to removing oils and acids and heavy metals. Many surveys of diatomaceous earth (diatomite) in Brazil involve studies on the physico-chemical, mineral deposits, extraction, processing and applications. The official estimated Jazi are around 2.5 million tonnes, the main located in the states of Bahia (44%) and Rio Grande do Norte (37,4%). Moreover, these two states appear as large offshore producers, earning a prominent role in research of adsorbents such as diatomite for treatment of water produced. Its main applications are as an agent of filtration, adsorption of oils and greases, industrial load and thermal insulator. The objective of this work was the processing and characterization of diatomite diatomaceous earth obtained from the municipality of Macaíba-RN (known locally as tabatinga) as a low cost regenerative adsorbent for removal of heavy metals in the application of water produced treatment. In this work we adopted a methodology for batch processing, practiced by small businesses located in producing regions of Brazil. The characterization was made by X-ray diffraction (XRD), scanning electron microscopy (SEM) and specific surface area (BET). Research conducted showed that the improvement process used was effective for small volume production of diatomite concentrated. The diatomite obtained was treated by calcination at temperature of 900 oC for 2 hours, with and without fluxing Na2CO3 (4%), according to optimal results in the literature. Column adsorption experiments were conducted to percolation of the in nature, calcined and calcined fluxing diatomites. Effluent was used as a saline solution containing ions of Cu, Zn, Na, Ca and Mg simulating the composition of produced waters in the state of Rio Grande do Norte, Brazil. The breakthrough curves for simultaneous removal of copper ions and zinc as a result, 84.3% for calcined diatomite and diatomite with 97.3 % for fluxing. The calcined fluxing diatomite was more efficient permeability through the bed and removal of copper and zinc ions. The fresh diatomite had trouble with the permeability through the bed under the conditions tested, compared with the other obtained diatomite. The results are presented as promising for application in the petroleum industry

O trabalho em saúde como espaço pedagógico: desafios e possibilidades

The ongoing transformations in brazilian society, arising from technical and organizational changes in the working world, are making, with much emphasis, heated debates resurge related to themes and issues that refer to the relationship between work, skills and education. Thus, this study is inserted in the link between education and work, pointing to the work as an educational principle according to Antonio Gramsci. This paper aims to discuss the interfaces between education and work in the everyday health care teams and learn about the activities developed by health teams related to the learning processes in and with the work to analyze the opportunities and challenges of transforming spaces of health work in an environment of lifelong learning. This is a descriptive, exploratory with a qualitative approach case study developed from semi-structured interviews with the health staff professionals of the Unidade de Terapia Intensiva da Casa de Saúde Dix-Sept Rosado in Mossoró / RN , who answered open questions about the relationship between education and work. The interviews were conducted during the month of January 2010, the same being recorded, transcribed and analyzed, culminating in the production of new knowledge on the subject. It is understood that work and education activities are eminently human, therefore only the human being works and educates. Given the statements of participants, it is noticed that all work processes in health are learning moments. This happens through new demands imposed by the everyday of the services, by interaction with a multidisciplinary team, participation in educational activities and individual study. It was noticed that the institution in this case does not promote study courses related to Intensive Care and that there are obstacles to the realization of educational activities on and with the work, such as: excessive workload, inability to release staff to participate in events, low pay, which leads the worker to have more than one employment, rejection of new knowledge by some workers and lack of physical infrastructure and incentives for the activities. The daily situations must be transformed in learning, selfanalyzing the problems of practice and valuing the work process itself in its intrinsic context. We conclude that dealing with the web of relationships between educational processes and production processes of health services, unraveling the intricacies of the world of work and education requirements in this sector are increasingly on the agenda of Sistema Único de Saúde workers and managers. The continuing consideration of this issue becomes an essential condition for the proper discharge of their responsibilities. We consider that bringing the education to everyday life is the result of recognition of the educational potential of the work situation

Desenvolvimento de um sistema de planejamento, gestão de serviços e controle de custos em obras de construção civil

The increasing competitiveness of the construction industry, set in an economic environment in which the offer is now greater than the demand , causes the prices of many products and services, are strongly influenced by the processes of production and the final consumer. Thus, to become more competitive in the market and construction companies are seeking new alternatives to reduce and control costs, production processes and tools that allow for close monitoring of the construction schedule, with the consequent compliance deadline with the client. Based on this scenario, the creation of control tools, service management and planning work emerges as an investment opportunity and an area that can promote great benefits to construction companies. The goal of this work is to present a system of planning, service management and costs control that through worksheets provide information relating to the production phase of the work, allowing the visualization of possible irregularities in the planning and cost of the enterprise, enabling the company to take steps to achieve the goals of the enterprise in question, and correct them when necessary. The developed system has been used in a piece of real estate in Rio Grande do Norte, and the results showed that its use together allowed the construction company to accompany their results and take corrective and preventive actions during the production process, efficiently and effective

Desempenho de argamassas produzidas com agregados reciclados oriundos do resíduo de construção e demolição da Grande Natal-RN

The construction industry is responsible for generating a lot of waste because of their activities. Consequently, it is noticeable the occurrence of environmental problems in terms of its disposal in inappropriate places. Faced with this problem, some studies have been conducted with the aim of developing technologies and alternatives for recycling construction and demolition waste (CDW), motivated by the scarcity of natural resources and reduction of environmental problems generated. The research aims to characterize the recycled aggregates derived from construction and demolition waste (CDW) produced in the Greater Natal-RN and analyze the performance of mortar coating produced with recycled aggregates. The study includes the chemical , physical and microstructural characterization of recycled aggregates , as well as conducting microscopic analysis and laboratory tests in the fresh state (consistency index , water retention , bulk density and content of entrained air ) and in the hardened state ( compressive strength , tensile strength in bending , water absorption by immersion and capillary , mass density and void ratio ) for mortars produced from different levels of substitution of aggregates ( 0, 20 %, 40 %, 60 %, 80 % and 100 %). The results were satisfactory, providing mortars produced with recycled aggregates, smaller mass density and dynamic modulus values as well as an increase in the rates of absorption and porosity. The tensile strength in bending and compression for TP1 (1:2:8) trait were lower for mortars produced with recycled aggregates and the best result was 20% for replacement. For the TP2 (1:8) mapping, there was an increase in resistance to traction and compression and the best result was for 100% replacement of natural aggregates by recycled. The experiments led to the conclusion that the technical and economic point of view that the mortars produced with recycled aggregates can be used in construction, only if there is an effective control in production processes of recycled aggregate and at the dosage of mortars

Controlador preditivo não linear aplicado ao controle de golfadas em processos de produção de petróleo

Slugging is a well-known slugging phenomenon in multiphase flow, which may cause problems such as vibration in pipeline and high liquid level in the separator. It can be classified according to the place of its occurrence. The most severe, known as slugging in the riser, occurs in the vertical pipe which feeds the platform. Also known as severe slugging, it is capable of causing severe pressure fluctuations in the flow of the process, excessive vibration, flooding in separator tanks, limited production, nonscheduled stop of production, among other negative aspects that motivated the production of this work . A feasible solution to deal with this problem would be to design an effective method for the removal or reduction of the system, a controller. According to the literature, a conventional PID controller did not produce good results due to the high degree of nonlinearity of the process, fueling the development of advanced control techniques. Among these, the model predictive controller (MPC), where the control action results from the solution of an optimization problem, it is robust, can incorporate physical and /or security constraints. The objective of this work is to apply a non-conventional non-linear model predictive control technique to severe slugging, where the amount of liquid mass in the riser is controlled by the production valve and, indirectly, the oscillation of flow and pressure is suppressed, while looking for environmental and economic benefits. The proposed strategy is based on the use of the model linear approximations and repeatedly solving of a quadratic optimization problem, providing solutions that improve at each iteration. In the event where the convergence of this algorithm is satisfied, the predicted values of the process variables are the same as to those obtained by the original nonlinear model, ensuring that the constraints are satisfied for them along the prediction horizon. A mathematical model recently published in the literature, capable of representing characteristics of severe slugging in a real oil well, is used both for simulation and for the project of the proposed controller, whose performance is compared to a linear MPC

Produção de enzimas por fungos em fermentação semi-sólida utilizando bagaço de coco e pedúnculo de caju como substratos

The production of enzymes by microorganisms using organic residues is important and it can be associated with several applications such as food and chemical industries and so on. The objective of this work is the production of CMCase, Xylanase, Avicelase and FPase enzymes by solid state fermentation (SSF) using as substrates: bagasse of coconut and dried cashew stem. The microorganisms employed are Penicillium chrysogenum and an isolated fungus from the coconut bark (Aspergillus fumigatus). Through the factorial design methodology and response surface analysis it was possible to study the influence of the humidity and pH. For Penicillium chrysogenum and the isolated fungus, the coconut bagasse was used as culture medium. In another fermentation, it was used the mixture of coconut bagasse and cashew stem. Fermentations were conducted using only the coconut bagasse as substrate in cultures with Penicillium chrysogenum fungus and the isolated one. A mixture with 50% of coconut and 50% of cashew stem was employed only for Penicillium chrysogenum fungus, the cultivation conditions were: 120 hours at 30 °C in BOD, changing humidity and pH values. In order to check the influence of the variables: humidity and pH, a 2 2 factorial experimental design was developed, and then two factors with two levels for each factor and three repetitions at the central point. The levels of the independent variables used in ascending order (-1, 0, +1), to humidity, 66%, 70.5% and 75% and pH 3, 5 and 7, respectively. The software STATISTICA TM (version 7.0, StatSoft, Inc.) was used to calculate the main effects of the variables and their interactions. The response surface methodology was used to optimize the conditions of the SSF. A chemical and a physic-chemical characterization of the coconut bagasse have determined the composition of cellulose (%) = 39.09; Hemicellulose (%) = 23.80, Total Lignin (%) = 36.22 and Pectin (%) = 1.64. To the characterization of cashew stem, the values were cellulose (g) = 15.91 Hemicellulose (%) = 16.77, Total Lignin (%) = 30.04 and Pectin (%) = 15.24. The results indicate the potential of the materials as substrate for semisolid fermentation enzyme production. The two microorganisms used are presented as good producers of cellulases. The results showed the potential of the fungus in the production of CMCase enzyme, with a maximum of 0.282 UI/mL and the Avicelase enzyme the maximum value ranged from 0.018 to 0.020 UI/ mL, using only coconut bagasse as substrate. The Penicillium chrysogenum fungus has showed the best results for CMCase = 0.294 UI/mL, FPase = 0.058 UI/mL, Avicelase = 0.010 UI/mL and Xylanase = 0.644 UI/ mL enzyme, using coconut bagasse and cashew stem as substrates. The Penicllium chrysogenum fungus showed enzymatic activities using only the coconut as substrate for CMCase = 0.233 UI/mL, FPase = 0.031 to 0.032 UI/ mL, Avicelase = 0.018 to 0.020 UI/mL and Xylanase = 0.735 UI/ mL. Thus, it can be concluded that the used organisms and substrates have offered potential for enzyme production processes in a semi-solid cultivation

Levantamento e avaliação de critérios para a ampliação de escala da produção de biossurfactantes utilizando melaço como substrato

Biosurfactants are amphiphilic molecules synthesized by microorganisms such as bacteria, yeast or filamented fungi cultivated in various carbon sources among sucrose and hydrocarbons. These molecules are composed by a hydrophilic and hydrophobic part. They operate mostly at interfaces of fluids of different polarities. Because of this characteristic, they are potentially employed in numerous industries, such as the textile, medical, cosmetics, food and mainly in the petrochemical ones. Therefore industry has interest in developing new biosurfactant production processes in high scale, in order to become them economically competitive when compared to synthetic biosurfactants. This work aims to evaluate the biosurfactant production applying a non-conventional substrate sugar cane molasses proceeding from the sugar industry thus reducing the production costs. The strain identified as AP029/GLIIA, isolated from oil wells in Rio Grande do Norte state and used in these experiments belongs to the culture collection of Antibiotics Department of UFPE. The fermentation were carried out using different conditions according to a factorial planning 24 with duplicate at center point, in which the studied factors were molasse concentration, nitrate concentration, agitation and aeration ratio. The experiments were performed in a shaker at 38ºC of temperature. Samples were withdrawn in regular periods of time of up to 72 hours of fermentation in order to analyze substrate consumption, cellular concentration, superficial tension, critical micelle dilution (CMD-1 e CMD-2) as well as extracelullar protein production. The results showed a production of 3,480 g/L of biomass, a reduction of 41% on superficial tension, 67% of substrate consumption and 0,2805 g/L of extracellular protein

A militância em movimento: amizade e maquinação de modos de existência no MST

This study focuses on two issues, the process of subjectivity production and the exercise of friendship alongside political militancy in the Landless Rural Workers Movement (MST). Friendship is here understood as the social practice with the potential to question certain modes of socially formed relationships as well as their becoming a political exercise. The political militancy phenomenon is problematized based on the subjectivity production perspective. The objective of the study was to construct acartography of the subjectivity production processes with political activists of the MST and to highlight the points in which the exercise of friendship enhances the appearance of singularity in the context of this militancy. The cartography is a research method that permits the identification of macro political, as well as micro political forces that interfere in a psychosocial context, such as the MST. The participants were members of an MST group that participated in a Pedagogy course coordinated by the Department of Education of the Universidade Federal do Rio Grande do Norte. The other participants were militants involved in political formation activities at the social base, as well as in the other levels of the MST in the states of Rio Grande do Norte, Paraíba, Pernambuco, Ceará, Minas Gerais and Paraná. The results are linked to the oscillate incorporation of the landless identity model that occurs as a group of disciplinary strategies are put in practice in the political formation activities with militants, as well as the ways of model evation are formed. This occurs to the extent that new demands and forms of invested desires beyond the land object are incorporated in the MST. Such singular processes happen in three areas of the political exercise of friendship articulation: the masses, where there is a possibility for the MST to construct a new social collectivity; gender relations, where the socially destined space for women is redimensionized and; sexual diversity, which provokes the MST to follow its potential in questioning the actual hegemonic living modes. It is therefore considered that the MST has a great opportunity to become an important mediator of contemporary social and political struggles

A mineração artesanal e de pequena escala em pegmatitos e cerâmica no município de Parelhas, região do Seridó/Rio Grande do Norte

The working conditions, occupational health, occupational illness and workers quality of life, usually referring to the artisanal activities and the workers with a poor professional support. Because this reality is still present in locals without good infrastructure of social and economic attention, there is a need for a broad knowledge of problems related to the productive processes that include features of unsanitary and unhealthy. Despite the intense process of industrialization promoted by globalization and the growth of developing nations like Brazil, the activities of artisanal and small-scale mining are still suffering from the marginalization of their production processes and their workers. This dissertation deals with the description of mineral-based activities (MBA), especially the activities related to production processes of extraction and processing of red pottery and minerals in pegmatites in Parelhas city, Seridó, Rio Grande do Norte, which are conducted by small mining companies or artisanal miners. The study of the work process was based on direct observation, photographic documentation, ergonomics, health and occupational safety analysis, interviews and structured questionnaire with workers of the two activities. The results indicate the need for improvement in both workplaces (red pottery and pegmatites), adaptation of workers to safety standards specific to the workplace, more attention and care related to ergonomics and occupational safety, greater importance to economic and social relations among performed activities, workers and firms of mineral branch and better and greater integration of social policies, supported by different sectors of society with the intention of transforming the current social, cultural, labor and education situation

Produção do espaço e transformações urbanas no litoral sul de João Pessoa - PB

This present work has as its objective the analysis of transformations relating to the production processes in the Southern littoral urban space of the city of João Pessoa PB. The research estimated that the urban space is the product, means and condition of the society which produces it. The object-area of this inquiry is constituted of five districts: Altiplano Cabo Branco, Portal do Sol, Ponta do Seixas, Penha and Costa do Sol. The urban expansion which occurs in this area is characterized by the appearance of sufficient contradictory space phenomenona. On the other hand, the launching of real estate products such as the horizontal closed condominiums, directed towards the upper class, and the occurrence of areas of irregular occupation, inhabited by lower socioeconomic class and with a great lack of infrastructure and basic urban services, revealing the social contradictions. Due to this, processes such as auto-segregation and segregation imposed beyond the precarious and delinquent inclusion, has become the determining characteristic of this part of the city in analysis. The study also takes into account the appreciation of the new urban environmental zoning of Altiplano do Cabo Branco and from this moment on, start the discussion about the tendencies of urban expansion in this area, due to the interests and strategies of the real estate sector and the prominent role of the government in the current valorization process of urban soil of the area. The presence of residuals of agricultural businesses indicates a typical picture of the peri-urban areas configuring what we observe today at the Southern littoral of João Pessoa

Study of the discovery potential of light custodians in a clean decay channel at the LHC

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Search for the Standard Model Higgs Boson in Tau Final States

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)