High power coherent beam combination from two fiber lasers

Phase locking of two fiber lasers is demonstrated experimentally by the use of a self-imaging resonator with a spatial filter. The high-contrast interference strips of the coherent beam profile are observed. The coherent output power of the fiber array exceeds 12W and the efficiency of coherent power combination is 88% with pump power of 60W. The whole system operates quite stably and, for the spatial filter, no thermal effects have been observed, which means that we can increase the coherent output power further by this method. (c) 2006 Optical Society of America

Mode properties of off-axis one-sided hybrid resonator for novel high average power dual-slab laser

A novel dual-slab laser with off-axis one-sided hybrid resonator is presented. The mode properties of the hybrid resonator are calculated using a fast Fourier transform method (FFT). The influence of wavefront distoration on the output beam quality is considered. Results indicate that the novel dual-slab laser is better than the normal dual-slab laser with off-axis one-sided hybrid resonator.

Quasi-self-imaging planar waveguide lasers with high-power single-mode output

We describe high-power planar waveguide laser which can achieve single-mode output from a multi-mode structure. The planar waveguide is constructed with incomplete self-imaging properties, by which the coupling loss of each guided mode can be discriminated. Thermal lens effects are evaluated for single-mode operation of such high-power diode-pumped solid-state lasers. (c) 2005 Elsevier B.V. All rights reserved.

High-power Nd:YAG planar waveguide laser with YAG and Al2O3 claddings

Thermal effects in Nd:YAG planar waveguide lasers with non-symmetrical claddings are discussed. The heat generated in the active core can be removed more efficiently by directly contacting the active core to the heat sink. Several cladding materials are compared to optimize the heat removal. Furthermore, uniform pumping is achieved with oblique edge-pumping technique. Using quasi-CW pumping at 1 KHz repetition rate, an average output power of 280 W with a slope efficiency of 38% is obtained with a positive unstable resonator. (C) 2008 Elsevier B.V. All rights reserved.

High power single transverse mode operation of a tapered large-mode-area fiber laser

To get high output power with good beam quality, a tapered section is introduced to large-mode-area (LMA) Yb-doped fiber laser. Output characteristics of the fiber laser without tapered section and with tapered section are compared experimentally. When the launched pump power is 119.1 W, 77.9 W with M-2 3.08 and 56.4 W with M-2 1.14 can be obtained, respectively. The corresponding slope efficiencies are 71.8% and 54.1%, respectively. Although output power of the tapered fiber laser has 30.6% penalty, brightness of it is as much as 5.28 times of the fiber laser without tapered section. Moreover, spectra of them are measured. It is found that tapered section makes lasing wavelength of the fiber laser shorter. (c) 2007 Elsevier B.V. All rights reserved.

O peptídeo natriurético tipo B (BNP) como preditor de mortalidade a longo prazo em pacientes com síndrome coronariana aguda sem supradesnível do segmento ST

Fundamentos: Apesar dos conhecimentos adquiridos sobre marcadores preditores de mortalidade na síndrome coronariana aguda (SCA), a capacidade de avaliação a longo prazo permanece desconhecida. O peptídeo natriurético tipo B (BNP) tem sido extensamente utilizado, porém as evidências existentes se restringem ao seguimento de curto e médio prazos. Objetivos: Determinar se o BNP é um preditor independente de mortalidade por todas as causas a longo prazo em pacientes com síndrome coronariana aguda sem supradesnível do segmento ST (SCASSST). Métodos: No período de 1o de Janeiro de 2002 a 31 de Dezembro de 2003, foram selecionados 224 pacientes consecutivos atendidos na sala de emergência com SCASSST. A dosagem do BNP à admissão foi incorporada no protocolo diagnóstico, tendo o seu valor sido correlacionado com a mortalidade ao final do seguimento. Resultados: Os pacientes foram acompanhados por 9,34 anos (mediana), tinham 71,5 anos (intervalo IQ=60,5;79,0) e com predomínio do gênero masculino (62,9%). A hipertensão arterial esteve presente em 82,1% e o diabetes em 23,7%. A angina instável (AI) foi diagnosticada em 52,2% e o infarto agudo do miocárdio sem supradesnível do segmento ST (IAMSSST) em 47,8%. O BNP mediano foi de 81,9 pg/ml (intervalo IQ 22,2; 225). A mortalidade se correlacionou com os quartis crescentes do BNP: 14,3; 16,1; 48,2; e 73,2% (p<0,0001). A curva ROC determinou o BNP=100 pg/ml como o melhor ponto de corte, tendo apresentado área sobre a curva (AUC) de 0,79 (IC 95%=0,72-0,85) e sendo preditor de mortalidade ao final do seguimento: 17,3% vs. 65,0%, p<0,001, RR=3,76 (IC 95%=2,49-5,63). O BNP teve poder prognóstico tanto nos pacientes com (26,7 vs. 71,2%, p<0,001) como nos sem (12,9 vs. 56,8%, p<0,001) alteração da função ventricular, e também conforme o diagnóstico de AI (18,7 vs. 48,6%, p=0,001) e IAMSSST (14,9 vs. 75,0%, p<0,001). Na análise de regressão logística, a idade>72 anos (OR=3,79, IC 95%=1,62-8,86, p=0,002), o BNP≥100 pg/ml (OR=6,24, IC 95%=2,95-13,23, p<0,001) e a taxa de filtração glomerular estimada (TFGE)(OR=0,98, IC 95%=0,97-0,99, p=0.049) foram preditores independentes de mortalidade. Conclusões: O BNP dosado à admissão dos pacientes com SCASSST é um forte e independente preditor de mortalidade a longo prazo.

A field effect transistor using highly nitrogen-doped CVD diamond for power device applications

A new idea of power device, which contains highly nitrogen-doped CVD diamond and Schottky contact, is proposed to actualise a power device with diamond. Two-dimensional simulation is conducted using ISE TCAD device simulator. While comparably high current is obtained in a transient simulation as expected, this current does not contribute to the drain-source current because of the symmetry of the device. Using an asymmetric structure or bias conditions, the device has high potential as an electric device for extremely high power, high frequency and high temperature. © 2003 Elsevier Science B.V. All rights reserved.

Field emission vacuum power switch using vertically aligned carbon nanotubes

The best field emission properties from carbon nanotube cathodes were obtained when their heights, diameters and spacings were optimized. Field emission currents as high as 10 mA were obtained from 1 cm × 1 cm vertically aligned CNT cathode with optimized parameters grown using dc plasma CVD in situ. It was found that in order to obtain large emission current of >10 mA, space charge effects within the electron beam must be taken into account.

High-power and picosecond pulse generation from a passively Q-switched tapered InGaAs/GaAs laser

Tapered waveguides have been used for enhancing pulse powers in Q-switched AlGaAs and InGaAsP lasers. This paper reports on passively Q-switched pulses with 1.53 W peak power and 41-ps FWHM from an InGaAs/GasAs (970 nm) double-contact tapered semiconductor laser in a well defined single-lobed far-field.

Transient thermal analysis of power devices based on Fourier-series thermal model

A new thermal model based on Fourier series expansion method has been presented for dynamic thermal analysis on power devices. The thermal model based on the Fourier series method has been programmed in MATLAB SIMULINK and integrated with a physics-based electrical model previously reported. The model was verified for accuracy using a two-dimensional Fourier model and a two-dimensional finite difference model for comparison. To validate this thermal model, experiments using a 600V 50A IGBT module switching an inductive load, has been completed under high frequency operation. The result of the thermal measurement shows an excellent match with the simulated temperature variations and temperature time-response within the power module. ©2008 IEEE.