The use of direct boundary element method for gaining insight into complex seismic site response

The boundary element method is specially well suited for the analysis of the seismic response of valleys of complicated topography and stratigraphy. In this paper the method’s capabilities are illustrated using as an example an irregularity stratified (test site) sedimentary basin that has been modelled using 2D discretization and the Direct Boundary Element Method (DBEM). Site models displaying different levels of complexity are used in practice. The multi-layered model’s seismic response shows generally good agreement with observed data amplification levels, fundamental frequencies and the high spatial variability. Still important features such as the location of high frequencies peaks are missing. Even 2D simplified models reveal important characteristics of the wave field that 1D modelling does not show up.

Paleogene-Aquitanian Tectonic Breakup in the Eastern External Betic Zone (Alicante, SE Spain)

Six Paleogene-Aquitanian successions have been reconstructed in the Alicante area (eastern External Betic Zone). The lithofacies association evidences “catastrophic” syn-sedimentary tectonic processes consisting of slumps, mega-olisthostromes, “pillow-beds” and turbiditic deposits. This kind of sedimentation is related to unconformity surfaces delimiting sequence and para-sequence cycles in the stratigraphic record. The data compiled have enabled the reconstruction of the Paleogene-Aquitanian paleogeographic and geodynamic evolution of this sector of the External Betics. During the Eocene the sedimentary basin is interpreted as a narrow trough affected by (growth) folding related to blind thrust faulting with a source area from the north-western margin, while the southeastern margin remained inactive. During the Oligocene-Aquitanian, the sourcing margin becames the southeastern margin of the basin affected by a catastrophic tectonic. The activity of the margins is identified from specific sediment source areas for the platform-slope-trough system and from tectofacies analysis. The southeastern South Iberian Margin is thought to be closer to the Internal Betic Zone, which was tectonically pushing towards the South Iberian Margin. This pushing could generate a lateral progressive elimination of subbetic paleogeographic domains in the eastern Betics. This geodynamic frame could explain the development of such “catastrophic” tectono-sedimentary processes during the Late Oligocene-Early Miocene.

Volcanic setting of the Bajo de la Alumbrera porphyry Cu-Au deposit, Farallon Negro Volcanics, Northwest Argentina

The late Miocene Farallon Negro volcanics, comprising basaltic to rhyodacitic volcano-sedimentary rocks, host the Bajo de la Alumbrera porphyry copper-gold deposit in northwest Argentina. Early studies of the geology of the district have underpinned the general model for porphyry ore deposits where hydrothermal alteration and mineralization develop in and around porphyritic intrusions emplaced at shallow depths (2.5-3.5 km) into stratovolcanic assemblages. The Farallon Negro succession is dominated by thick sequences of volcano-sedimentary breccias, with lavas forming a minor component volumetrically. These volcaniclastic rocks conformably overlie crystalline basement-derived sedimentary rocks deposited in a developing foreland basin southeast of the Puna-Altiplano plateau. Within the Farallon Negro volcanics, volcanogenic accumulations evolved from early mafic to intermediate and silicic compositions. The younger and more silicic rocks are demonstrably coeval and comagmatic with the earliest group of mineralized porphyritic intrusions at Bajo de la Alumbrera. Our analysis of the volcanic stratigraphy and facies architecture of the Farallon Negro volcanics indicates that volcanic eruptions evolved from effusive to mixed effusive and explosive styles, as magma compositions changed to more intermediate and silicic compositions. Air early phase of mafic to intermediate voleanism was characterized by small synsedimentary intrusions with peperitic contacts, and lesser lava units scattered widely throughout the district, and interbedded with thick and extensive successions of coarse-grained sedimentary breccias. These sedimentary breccias formed from numerous debris- and hyperconcentrated flow events. A later phase of silicic volcanism included both effusive eruptions, forming several areally restricted lavas, and explosive eruptions, producing more widely dispersed (up to 5 kin) tuff units, some tip to 30-m thickness in proximal sections. Four key features of the volcanic stratigraphy suggest that the Farallon Negro volcanics need not simply record the construction of a large steep-sided polygenetic stratovolcano: (1) sheetlike, laterally continuous debris-flow and other coarse-grained sedimentary deposits are dominant, particularly in the lower sections; (2) mafic-intermediate composition lavas are volumetrically minor; (3) peperites are present throughout the sequence; and (4) fine-grained lacustrine sandstone-siltstone sequences occur in areas previously thought to be proximal to the summit region of the stratovolcano. Instead, the nature, distribution, and geometry of volcanic and volcaniclastic facies suggest that volcanism occurred as a relatively low relief, multiple-vent volcanic complex at the eastern edge of a broad, > 200-km-wide late Miocene volcanic belt and oil ail active foreland sedimentary basin to the Puna-Altiplano. Volcanism that occurred synchronously with the earliest stages of porphyry-related mineralization at Bajo de la Alumbrera apparently developed in an alluvial to ring plain setting that was distal to larger volcanic edifices.

Monte Carlo and molecular dynamics simulations of methane in potassium montmorillonite clay hydrates at elevated pressures and temperatures

The structure and dynamics of methane in hydrated potassium montmorillonite clay have been studied under conditions encountered in sedimentary basin and compared to those of hydrated sodium montmorillonite clay using computer simulation techniques. The simulated systems contain two molecular layers of water and followed gradients of 150 barkm-1 and 30 Kkm-1 up to a maximum burial depth of 6 km. Methane particle is coordinated to about 19 oxygen atoms, with 6 of these coming from the clay surface oxygen. Potassium ions tend to move away from the center towards the clay surface, in contrast to the behavior observed with the hydrated sodium form. The clay surface affinity for methane was found to be higher in the hydrated K-form. Methane diffusion in the two-layer hydrated K-montmorillonite increases from 0.39×10-9 m2s-1 at 280 K to 3.27×10-9 m2s-1 at 460 K compared to 0.36×10-9 m2s-1 at 280 K to 4.26×10-9 m2s-1 at 460 K in Na-montmorillonite hydrate. The distributions of the potassium ions were found to vary in the hydrates when compared to those of sodium form. Water molecules were also found to be very mobile in the potassium clay hydrates compared to sodium clay hydrates. © 2004 Elsevier Inc. All All rights reserved.

Gridded results of swath bathymetric mapping of Disko Bay, Western Greenland, 2007-2008

A ship-based acoustic mapping campaign was conducted at the exit of Ilulissat Ice Fjord and in the sedimentary basin of Disko Bay to the west of the fjord mouth. Submarine landscape and sediment distribution patterns are interpreted in terms of glaciomarine facies types that are related to variations in the past position of the glacier front. In particular, asymmetric ridges that form a curved entity and a large sill at the fjord mouth may represent moraines that depict at least two relatively stable positions of the ice front in the Disko Bay and at the fjord mouth. In this respect, Ilulissat Glacier shows prominent differences to the East Greenland Kangerlussuaq Glacier which is comparable in present size and present role for the ice discharge from the inland ice sheet. Two linear clusters of pockmarks in the center of the sedimentary basin seem to be linked to ongoing methane release due to dissociation of gas hydrates, a process fueled by climate warming in the Arctic realm.

Contribuição para o conhecimento da geologia do Grupo das Beiras (CXG) na região do Caramulo-Buçaco, Portugal Central

O presente trabalho ocupa-se do estudo do Complexo Xisto-Grauváquico ante-ordovícico (Grupo das Beiras) na região do Caramulo-Buçaco (centro de Portugal). Em termos geológicos, a área estudada pertence à Zona Centro Ibérica e encontra-se limitada a N pelo granito do Caramulo, a S pela bacia meso-cenozóica de Arganil, a W pelo sinclinal paleozóico do Buçaco e pela bacia meso-cenozóica ocidental portuguesa e a E pelo sinclinal paleozóico de Arganil e pelo plutonito granítico de Tábua-Santa Comba Dão; no seio da área estudada encontra-se a bacia meso-cenozóica de Mortágua. Com base nas características litológicas e estruturais distinguem-se no Complexo Xisto Grauváquico 4 grandes conjuntos litológicos concordantes entre si, designados de Unidades I, II, III e IV, que se desenvolvem da base para o topo de N para S. A Unidade I situa-se a N da região. O seu limite inferior é desconhecido, e o superior posiciona-se no último conjunto arenoso com potência decamétrica. É constituída por xistos cinzentos e negros com intercalações de arenitos de espessura não superior a 100 metros e de extensão lateral quilométrica. Apresenta uma espessura mínima de 1000 m. A Unidade II apresenta consideravelmente menor proporção de material arenoso intercalado entre os pelitos comparativamente à unidade inferior. É caracterizada por apresentar um predomínio de material silto-argiloso e escassos níveis arenosos com potência não superior à dezena de metros e escassa continuidade lateral. Cartograficamente esta unidade constitui uma franja alargada de orientação próxima a E-W. Apresenta uma espessura aproximada de 1500 m. A Unidade III é caracterizada pela presença de conjuntos arenosos com extensão lateral quilométrica e espessura de várias dezenas de metros, separados por material silto-argiloso. Os limites inferior e superior estão situados respectivamente abaixo e acima dos principais conjuntos arenosos. Esta unidade apresenta uma espessura máxima estimada na ordem dos 2000 m. A Unidade IV, que é a unidade superior, apresenta um predomínio pelítico, com escassas intercalações de conjuntos arenosos. O seu limite inferior encontra-se no topo do último conjunto arenoso da Unidade III. Apresenta uma espessura mínima de 500 m. As características sedimentológicas das 4 unidades indicam uma sedimentação num ambiente de plataforma externa siliciclástica aberta, com a construção de barras e por vezes sujeita à acção de tempestades, com sucessivos períodos de superficialização e profundização numa bacia de sedimentação bastante subsidente. Em termos estruturais, para além duma deformação pré-ordovícica, que é comprovada pelo forte mergulho e dispersão da orientação dos eixos da 1ª fase varisca e da lineação de intersecção L1, a área estudada foi principalmente afectada pela Orogenia Varisca. A 1ª fase de deformação varisca (F1) gerou dobras com superfícies axiais e xistosidade associada (S1) de direcção WNW-ESE, e forte pendor para NNE. Estas dobras D1 apresentam comprimentos de onda que nunca chegam a ser quilométricos, desenvolvendo-se um grande flanco inverso denunciando a presença de uma antiforma para NNE e uma sinforma para SSW. A 2ª fase de deformação varisca (F2) actuou na parte nordeste da área estudada e é caracterizada por ter gerado dobras de comprimento de onda quilométrico, com planos axiais e xistosidade associada S2 de direcção NW-SE, subverticais ou a pender fortemente para NE. Embora com alguma dispersão, as lineações de intersecção L2 e os eixos das dobras D2 apresentam maioritariamente forte pendor para E. A direcção e tipos de estruturas da F2 sugerem uma correlação com a terceira fase definida em vários pontos da Zona Centro Ibérica e estreitamente relacionada com as intrusões graníticas. Do ponto de vista petrológico, distinguem-se várias rochas sedimentares (pelitos e arenitos) todas elas sujeitas a metamorfismo que não ultrapassa a fácies dos xistos verdes. Dentro das rochas sedimentares mais grosseiras, há a destacar a presença de arenitos vulcânicos cuja composição denuncia, não muito afastados da bacia sedimentar, a presença de aparelhos vulcânicos que estariam em actividade durante a sedimentação. Foram analisadas isotopicamente 27 amostras de metapelitos colhidas em 5 locais diferentes de forma a abranger quase toda a área estudada. Os dados isotópicos de quatro destes locais de amostragem forneceram isócronas Rb-Sr, em rocha total, com valores da ordem dos 400-440 Ma. O granito do Caramulo, datado pela isócrona Rb-Sr em amostras de rocha total, forneceu uma idade de 326±12Ma. As idades modelo Sm-Nd (manto empobrecido) de 5 amostras de metapelitos estão compreendidas entre 1.35 e 1.25 Ga. Este período de tempo pode ser considerado como correspondendo à época de diferenciação mantélica da crusta que deu lugar à maioria das áreas fonte dos metapelitos.

Tectonic expression of an active slab tear from high-resolution seismic and bathymetric data offshore Sicily (Ionian Sea)

Subduction of a narrow slab of oceanic lithosphere beneath a tightly curved orogenic arc requires the presence of at least one lithospheric scale tear fault. While the Calabrian subduction beneath southern Italy is considered to be the type example of this geodynamic setting, the geometry, kinematics and surface expression of the associated lateral, slab tear fault offshore eastern Sicily remain controversial. Results from a new marine geophysical survey conducted in the Ionian Sea, using high-resolution bathymetry and seismic profiling reveal active faulting at the seafloor within a 140 km long, two-branched fault system near Alfeo Seamount. The previously unidentified 60 km long NW trending North Alfeo Fault system shows primarily strike-slip kinematics as indicated by the morphology and steep-dipping transpressional and transtensional faults. Available earthquake focal mechanisms indicate dextral strike-slip motion along this fault segment. The 80 km long SSE trending South Alfeo fault system is expressed by one or two steeply dipping normal faults, bounding the western side of a 500+ m thick, 5 km wide, elongate, syntectonic Plio-Quaternary sedimentary basin. Both branches of the fault system are mechanically capable of generating magnitude 6-7 earthquakes like those that struck eastern Sicily in 1169, 1542, and 1693.

Aerial line transect survey to estimate abundance of marsh deer (Blastocerus dichotomus) (Illiger, 1815)

A população de cervo-do-pantanal (Blastocerus dichotomus) está drasticamente reduzida no Brasil. O nosso objetivo foi o de estimar a abundância do cervo-do-pantanal na bacia do Rio Paraná e discutir a metodologia aplicada. Os resultados darão suporte para uma análise do impacto do enchimento da represa de Porto Primavera sobre essa população. Sessenta e nove animais foram registrados através de sobrevôo utilizando-se a metodologia de transecção linear com amostragem das distâncias. Os dados não corrigidos resultaram em uma densidade estimada de 0,0035ind/ha e uma população de 636 indivíduos. A correção de g para os animais que não foram vistos apresentou uma densidade de 0,0049 ind/ha e uma abundância de 896 (CV=0,27) indivíduos. A metodologia foi aplicada com sucesso na estimativa de cervo-do-pantanal. Esse resultado é importante para avaliarmos a população do cervo-do-pantanal na área e para futuramente analisarmos o impacto do enchimento da represa.

Coastal lagoons and their watersheds as GWDE: a case study in the southwest coast of Portugal

The study of groundwater dependent ecosystems opened the opportunity to involve specialists of different areas of knowledge in order to obtain answers for complex interrelations between groundwater and the associated ecosystems. The actual study, carried out in two coastal lagoons of the Portuguese SW coast, showed the high dependency of the marine life and vegetation of the lagoons and associated streams discharging in the lagoons on the fresh water supply of these two lagoons and the high contribution they receive from groundwater in the dry period, which corresponds to more than half of each hydrologic year. Every year, the lagoons are artificially opened to the ocean for a few days to a few weeks, which dramatically changes the inside salinity. The sensitivity of these ecological niches is demonstrated by the strong dependence that some species that are more sensitive to high salinity waters show in relation to the entrance of freshwater resultant from the discharge of the phreatic aquifer of Sines sedimentary Basin. The great biodiversity of these lagoons and its precarious balance is only possible to preserve if the aquifer continue to act as a regulatory factor of the lagoon’s salinity. The equilibrium can be changed in the event of overexploitation of the phreatic aquifer, which is not at risk in the near future. In a scenario of climate change the lagoons will benefit from a slow increase in groundwater contribution, due to the rise of sea level, which will be accompanied by a rise in groundwater levels in the aquifer near the sea.

Confirmação do modelo da estrutura 3D do vale inferior do Tejo a partir de dados de ruído sísmico ambiente

Ao longo de sua história a região do Vale Inferior do Tejo VIT foi abalada por vários sismos consideravelmente destrutivas, tendo alguns deles produzido significativas deformações nas estruturas marítimas localizadas no litoral a sudoeste do território Português; outros, moderados, foram produzidos por fontes locais, como os de 1344, 1531 e 1909. Nos últimos anos, devido à melhoria dos modelos de estrutura 3D e o desenvolvimento dos métodos numéricos, foram elaborados vários estudos de síntese de movimento forte do solo para a região do Baixo Tejo utilizando o método de diferenças finitas. Para confirmar o modelo de velocidades desta bacia usámos medidas de ruído sísmico, aplicámos um método baseado na razão espectral H/V, e, a partir destas curvas, por inversão, obtivemos um modelo de velocidades para a região estudada. Os resultados revelam uma boa concordância entre o modelo obtido e os dados geofísicos e geológicos recolhidos na mesma área._ ABSTRACT: Along his history the Lower Tagus Valley (LTV) area was shaken by several earthquakes. The largest reported had their origin in the southwestern part of Iberia. Other moderate earthquakes were produced by local sources such as the 1344, 1531 and the 1909. ln the last years, due to 3D structural model improvement and development in numerical methods, several studies have successful obtained strong-ground motion synthesis for the LVT region using finite difference method. To confirm the velocity model of the LTV sedimentary basin obtained by geophysical and geological data, we use broad-band microtremor measurements and application of the horizontal to vertical (H/V) spectral ratio method. We have obtained a velocity model for the studied region by inversion of the H/V curve. The results have good agreement geological and geophysical data.

Paraná Basin: Mineral resource potentials in Brazil, Uruguay, and Paraguay

The Paraná Basin is a Western Gondwanan cratonic basin that is better defined as the Paraná depositional site, since it has a diverse history as a basin. Sedimentation started in the Ordovician-Silurian, followed by extensive marine Devonian deposition. A Late Paleozoic/ Triassic facies cycle wedge was clearly built during Pangean time. The Early Cretaceous was characterized by extensive basaltic lava flows immediately before the break-up of Pangea. Following these rifting and drifting processes, the basin's structural framework was totally rebuilt, generating new depositional sites in the Late Cretaceous to Tertiary. Based on more recent data, at least two different basins may be defined during the evolution of what was once considered a unique basin. Nevertheless, even if considered as a single basin, the sedimentary pile of the Paraná Basin has considerable economic potential, until now exploited only rudimentarily, except for its groundwater resources. Aggregates, limestones, clays, industrial sands, gems, dimension stones, hydrocarbons, coal, peat, and uranium are some of the potential mineral resources of this basin. Copyright © 1997 by V. H. Winston & Son, Inc. All rights reserved.

The first Triassic lungfish from South America (Santa Maria Formation, Paraná Basin) and its bearing on geological correlations within Pangaea

The Triassic fish faunas of the Southern Hemisphere are only known from a few sedimentary basins and the most productive sites are those from the Karoo Supergroup, in South Africa and the Sydney Basin of Australia. A single lungfish tooth plate ascribed to Ptychoceratodus cf. philippsi was recovered from Late Triassic (Carnian) red beds of southern Brazil and is described herein. This find extends to South America the palaeogeographic distribution of the genus, which occurs in the Early Triassic of Australia and South Africa and the Middle/Late Triassic of Europe and Late Triassic of Madagascar and India. The presence of this dipnoan solely in the uppermost part of the Santa Maria Formation suggests that the migration of Ptychoceratodus towards the Paraná Basin began not before the late Induan/early Olenekian (late Early Triassic). At that time, more humid (monsoonal) conditions prevailed in what is now southern Brazil, compared to semi-arid/desert conditions that dominated the Late Permian and possibly the earliest Early Triassic (the latter presumably not represented in the Paraná Basin). © The Geological Society of London 2008.

Biostratigraphy and paleoecology of an unusual palynological record from the Aquidauana Formation, Late Pennsylvanian of Paraná Basin

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)