Synthesis and growth of hematite nanodiscs through a facile hydrothermal approach

This study reports a facile hydrothermal method for the synthesis of monodispersed hematite (α-Fe2O3) nanodiscs under mild conditions. The method has features such as no use of surfactants, no toxic precursors, and no requirements of high-temperature decomposition of iron precursors in non-polar solvents. By this method, α-Fe2O3 nanodiscs were achieved with diameter of 50 ± 10 nm and thickness of ~6.5 nm by the hydrolysis of ferric chloride. The particle characteristics (e.g., shape, size, and distribution) and functional properties (e.g., magnetic and catalytic properties) were investigated by various advanced techniques, including TEM, AFM, XRD, BET, and SQUID. Such nanodiscs were proved to show unique magnetic properties, i.e., superparamagnetic property at a low temperature (e.g., 20 K) but ferromagnetic property at a room temperature (~300 K). They also exhibit low-temperature (<623 K) catalytic activity in CO oxidation because of extremely clean surfaces due to non-involvement of surfactants, compared with those spheres and ellipsoids capped by PVP molecules.

Plant variety protection and traditional agricultural knowledge in Southeast Asia

This article provides an overview of the emerging plant variety protection (PVP) systems in Southeast Asia. The case studies are from countries that form part of the regional Association of Southeast Asian Nations (ASEAN), mainly Indonesia, Malaysia, Philippines and Thailand. The focus will be on the intersection between intellectual property rights (IPRs) and popular demands for the protection of the traditional knowledge (TK) of local communities. Factors that fuelled the emergence and shaped the content of the PVP laws were the obligation to comply with art 27(3)(b) of the Agreement on Trade Related Aspects of Intellectual Property Rights (TRIPS Agreement), aspirations for the development of the biotechnology industry, avoidance of possible sanction under the US ‘Special 301’ procedure, Free Trade Agreements (FTAs), the role played by the International Union for the Protection of New Plant Varieties (UPOV), technical assistance from UPOV member countries, membership of international biodiversity treaties and demands from civil society organisations for protection of TK. The PVP laws that resulted present an uneasy amalgam of conventional property rights with some aspects of protection of TK. It is very likely that the local communities claiming TK rights will face legal hurdles, in as much as government agencies implementing the law will face administrative and technical complications.

Carbon nanofibers with inter-bonded fibrous structure for supercapacitor application

In this study, we have improved carbon nanofiber interconnection by using two electrospinning methods: conventional electrospinning and side-by-side bicomponent electrospinning to produce polyvinylpyrrolidone (PVP)/polyacrylonitrile (PAN) blend nanofibers and PVP/PAN side-by-side bicomponent nanofibers respectively. Upon carbonization, the nanofibers showed inter-bonded morphologies. PVP here functioned to bind nanofibers during carbonization. The inter-boned fibrous morphology was highly affected by the PVP/PAN ratio and the electrospinning method. Carbon nanofibers prepared by the bicomponent electrospinning were found to have larger capacitances compared to those prepared by the conventional electrospinning. The influence of electrospinning method, PAN/PVP ratio on the crystallinity of carbon nanofibers, their surface morphology and capacitor performance were examined. The influence mechanism was elucidated as well.

Large-scale synthesis and growth mechanism of single-crystal Se nanobelts

Single-crystal trigonal (t) Se nanobelts have been synthesized on a large scale by reducing SeO2 with glucose at 160 °C. Electron microscopy images show that the nanobelts are 80 nm in diameter, 25 nm in thickness, and up to several hundreds of micrometers in length. HRTEM images prove that the nanobelts are single crystals and preferentially grow along the [001] direction. The time-dependent TEM images revealed that the formation and growth of t-Se nanobelts were governed by a solid−solution−solid growth mechanism. The redox reaction directly produced amorphous (α) Se nanoparticles under hydrothermal conditions. t-Se nanobelts were formed by dissolution and recrystallization of the initial α-Se nanoparticles under the functional capping of poly(vinylpyrrolidone) (PVP). The nanobelts obtained exhibit a quantum size effect in optical properties, showing a blue shift of the band gap and direct transitions relative to the values of bulk t-Se.

Nanofibrous p-n junction and its rectifying characteristics

Randomly oriented tin oxide (SnO2) nanofibers and poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate)/polyvinylpyrrolidone (PEDOT:PSS/PVP) nanofibers were prepared by a two-step electrospinning technique to form a layered fibrous mat. The current-voltagemeasurement revealed that the fibrousmat had an obvious diode-rectifying characteristic. The thickness of the nanofiber layers was found to have a considerable influence on the device resistance and rectifying performance. Such an interesting rectifying property was attributed to the formation of a ??-?? junction between the fibrous SnO2 and PEDOT:PSS/PVP layers. This is the first report that a rectifying junction can be formed between two layers of electrospun nanofiber mats, and the resulting nanofibrous diode rectifier may find applications in sensors, energy harvest, and electronic textiles.

Ultrafine PDMS fibers: Preparation from in situ curing-electrospinning and mechanical characterization

Polydimethylsiloxane (PDMS) fibers with unexpected elasticity were prepared by a modified core-shell electrospinning method using a commercially-available liquid PDMS precursor (Sylgard 184) and polyvinylpyrrolidone (PVP) as core and sheath materials, respectively. The liquid PDMS precursor was crosslinked in situ to form a solid core when the newly-electrospun core-sheath nanofibers were deposited onto a hot-plate electrode collector. After dissolving the PVP sheath layer off the fibers, net PDMS fibers showed larger average diameter than core-sheath fibers, with an average diameter around 1.35 μm. The tensile properties of both single fibers and fibrous mats were measured. Single PDMS fibers had a tensile strength and elongation at break of 6.0 MPa and 212%, respectively, which were higher than those of PDMS cast film (4.9 MPa, 93%). The PDMS fiber mat had larger elongation at break than the single PDMS fibers, which can be drawn up to 403% their original length. Cyclic loading tests indicated a Mullin effect on the PDMS fiber mats. Such a superior elastic feature was attributed to the PDMS molecular orientation within fibers and the randomly-orientated fibrous structure. Highly-elastic, ultrafine PDMS fibers may find applications in strain sensors, biomedical engineering, wound healing, filtration, catalysis, and functional textiles. © The Royal Society of Chemistry 2014.

Hydrogel properties of electrospun polyvinylpyrrolidone and polyvinylpyrrolidone/poly(acrylic acid) blend nanofibers

Hydrogel nanofibers with high water-absorption capacity and excellent biocompatibility offer wide use in biomedical areas. In this study, hydrogel nanofibers from polyvinylpyrrolidone (PVP) and PVP/poly(acrylic acid) (PAA) blend were prepared by electrospinning and by subsequent heat treatment. The effects of post-electrospinning heat treatment and PVP/PAA ratio on hydrogel properties of the nanofibers were examined. Heat treatment at a temperature above 180°C was found to play a key role in forming insoluble and water-absorbent nanofibers. Both PVP and PVP/PAA nanofibers showed high morphology stability in water and excellent water retention capacity. The swelling ratio of PVP/PAA nanofibers declined with increasing heating temperature and decreasing PVP/PAA unit ratio. In comparison with dense casting films, these nanofiber membranes showed nearly doubled swelling ratio.

A novel route for tethering graphene with iron oxide and its magnetic field alignment in polymer nanocomposites

We present a new route of tethering graphene nanoplatelets (GNPs) with Fe3O4 nanoparticles to enable their alignment in an epoxy using a weak magnetic field. The GNPs are first stabilised in water using polyvinylpyrrolidone (PVP) and Fe3O4 nanoparticles are then attached via co-precipitation. The resultant Fe3O4/PVP-GNPs nanohybrids are superparamagnetic and can be aligned in an epoxy resin, before gelation, by applying a weak magnetic field as low as 0.009 T. A theoretical model describing the alignment process is presented and used to quantify the effects of key parameters on the time needed for the alignment process. Compared to the unmodified epoxy, the resulting epoxy polymer nanocomposites containing randomly-oriented Fe3O4/PVP-GNPs nanohybrids exhibit significantly improved electrical conductivities by up to three orders of magnitude and fracture energies by up to 300%. The alignment of the Fe3O4/PVP-GNPs nanohybrids in the epoxy polymer nanocomposites transverse to the direction of crack propagation further increased the fracture energy by 50%, and the electrical conductivity by seven fold in the alignment direction, compared to the nanocomposites containing randomly-oriented nanohybrids.

Produção in vitro de embriões bovinos utilizando diferentes condições de maturação oocitária

O experimento avaliou o uso do meio TCM-199 suplementado com: SVE, SEE e SFB (meio indefinido); BSA (meio semi-definido) e PVA (meio definido); na presença ou ausência de hormônios (FSH e hCG) na maturação in vitro de oócitos bovinos nas condições do Laboratório de Embriologia e Biotécnicas de Reprodução da UFRGS. Complexos cumuli-oophorus (CCOs), em número total de 1458, foram aleatoriamente distribuídos em doze tratamentos, maturados por 24 h em atmosfera de 5% CO2, em ar e 100% umidade relativa em estufa a 39°C. A fecundação nos doze tratamentos foi realizada mediante exposição dos CCOs maturados aos espermatozóides (1x106/mL), previamente capacitados, durante 20 h. O cultivo foi realizado em fluído sintético de oviduto modificado (SOFaa) acrescido de 10% SVE a 39°C, 100% de umidade relativa do ar e 5% CO2, 5% O2 e 90% N2. Na presença de hormônios os meios indefinidos (SVE: 63,6%, 70/110; SEE: 53,4%, 70/131 e SFB: 56,0%, 75/134) apresentaram maior eficiência em proporcionar suporte à primeira divisão embrionária, em comparação ao meio definido (PVP: 50,6%, 45/89). Os CCOs maturados em meio indefinido suplementado com SVE e hormônios apresentaram maior competência em fecundar e suportar o desenvolvimento embrionário até o estádio de blastocisto após sete dias de cultivo (27,3%, 30/110).

Caracterização de filmes ópticos compósitos nano-estruturados, inomogêneos ou anisotrópicos, produzidos por troca iônica e pelo método sol-gel

Este trabalho tem como objetivo o desenvolvimento e a aplicação de métodos de caracterização de filmes ópticos, associados à sua estrutura inomogênea ou anisotrópica. Os materiais estudados são guias ópticos planares e filmes compósitos com propriedades ópticas não-lineares. Esses materiais são relevantes para aplicações na área de optoeletrônica e óptica integrada. O trabalho é dividido em duas partes principais. A primeira parte é dedicada à caracterização de guias de onda planares produzidos por troca iônica, vidros dopados com íons de Ag e/ou K, através de um e/ou dois processos de troca. O perfil de índice de refração é estudado através da técnica de Modos Guiados, uma técnica óptica empregada tradicionalmente em guias desse tipo. Em complementação a essa medida óptica, são realizadas medidas do perfil de concentração do íon dopante, empregando as técnicas de RBS e EDS. É dedicado um interesse especial pela região próxima à superfície da amostra, a região crítica na análise por Modos Guiados. Os métodos de Abelès-Hacskaylo e de Brewster-Pfund são estendidos a esses guias inomogêneos, permitindo a medida direta do valor do índice de refração superficial. Essa informação e os dados obtidos por Modos Guiados permitem a determinação de um perfil de índice de refração mais acurado ao longo da profundidade do guia. A segunda parte é dedicada ao estudo de materiais compósitos: filmes finos constituídos por uma matriz (silicato, silicato + PVP, e PMMA) dopada com moléculas orgânicas que apresentam propriedades ópticas não-lineares de segunda ordem (PNA, DR-1 e HBO-BO6). Nessas amostras, é aplicado um campo elétrico de alta voltagem (efeito corona), gerando um alinhamento dos cromóforos dopantes. Essa mudança na simetria estrutural do material, de isotrópica para uniaxial, é observada através da assimetria correspondente no valor do índice de refração (birrefringência). O valor da birrefringência induzida é obtido através da medida da variação da refletância de luz pelo material, auxiliada por medidas prévias das constantes ópticas do material por Elipsometria.

Sensores em fibra óptica para monitorização ambiental

Fruto da crescente preocupação face à bioacumulação e bioconcentração de poluentes e conscientização dos efeitos do aquecimento global, nos últimos anos têm sido adoptadas inúmeras acções e medidas que visam o controlo de parâmetros indicadores da qualidade do meio, a detecção de substâncias potencialmente perigosas e a promoção/utilização de energias alternativas não poluentes. Neste âmbito, a monitorização em tempo real revela-se fundamental para a análise contínua do equilíbrio dos ecossistemas. Neste contexto, os sensores de fibra óptica, mais concretamente os sensores químicos em fibra óptica possuem um conjunto de características, como por exemplo a miniaturização, baixo custo, versatilidade, biocompatibilidade, capacidade de monitorização remota, que representam uma alternativa tecnológica e economicamente viável. Por outro lado, a utilização de redes de difracção em sensores de fibra óptica, é em adição uma mais-valia para este tipo de sistemas, as redes de período longo pela sua sensibilidade intrínseca ao índice de refracção, e as redes de Bragg pela sua facilidade de interrogação e facilidade de multiplexagem. A presente dissertação tem por objectivo o estudo, desenvolvimento e análise de sensores em fibra óptica para monitorização de espaços ambientais. O presente documento encontra-se organizado em cinco capítulos. O capítulo 1 faz um enquadramento dos sensores de fibra óptica para monitorização ambiental dando relevo aos sensores químicos em fibra óptica. No capítulo 2 expõe-se o conjunto de conceitos necessários para a compreensão do trabalho. A começar pelas redes de difracção em fibra óptica e a suas potencialidades como elementos sensores. Algumas configurações foram detalhadas assim como alguns princípios para interrogação das mesmas. A medição multi-parâmetro e o fabrico de membranas de sensibilidade selectiva são também abordados. O Capitulo 3 refere a primeira configuração desenvolvida, trata-se de um sensor interferométrico baseado numa cavidade Fabry-Pérot, constituído por uma rede de Bragg e a reflectividade da ponta da fibra. O objectivo do sensor é a monitorização do ácido acético e outras espécies carboxílicas em bioreactores. Para tornar a configuração sensível ao ácido foi aplicado um revestimento de Silane-PVP à extremidade da fibra. A configuração sensora demonstrada aufere de características favoráveis, como excelente resolução, resposta linear, não utilização de indicadores, leitura em reflexão e o facto de operar na janela espectral das telecomunicações. O Capítulo 4 apresenta a segunda configuração desenvolvida que tem por objectivo a medição simultânea de salinidade e temperatura. A medição de salinidade é baseada no índice de refracção. Trata-se de um sensor de intensidade auto-referenciado, baseado em três redes de difracção. Uma rede de período longo sensível ao índice de refracção e temperatura e duas redes de Bragg, para interrogação da da rede de período longo e compensação de temperatura. Para discriminação dos parâmetros de interesse foi utilizado o método matricial. A configuração exposta exibe características favoráveis, como excelente resolução, resposta linear, discriminação de índice de refracção e temperatura, leitura em reflexão e o facto de operar na janela espectral das telecomunicações. O Capitulo 5 contém as conclusões e comentários finais ao trabalho. No final da tese seguem-se os anexos, onde se encontram as publicações e comunicações resultantes do trabalho realizado.

Obtenção de sistemas multiparticulados de isoniazida revestidos com polímero de liberação entérica

Known for thousands of years, tuberculosis (TB) is the leading cause of mortality by a single infectious disease due to lack of patient adherence to available treatment regimens, the rising of multidrug resistant strains of TB (MDR-TB) and co-infection with HIV virus. Isoniazid and rifampicin are the most powerful bactericidal agents against M. tuberculosis. Because of that, this couple of drugs becomes unanimity in anti-TB treatment around the world. However, the rifampicin in acidic conditions in the stomach can be degraded rapidly, especially in the presence of isoniazid, which reduces the amount of available drug for absorption, as well as its bioavailability, contributing to the growing resistance to tuberculostatic drugs. Rifampicin is well absorbed in the stomach because of its high solubility between pH 1 and 2 and the gastric absorption of isoniazid is considered poor, therefore it is mostly intestinal. This work has as objective the development of gastro-resistant multiple-systems (granules and pellets) of isoniazid aiming to prevent the contact with rifampicin, with consequent degradation in acid stomach and modulate the release of isoniazid in the intestine. Granules of isoniazid were obtained by wet method using both alcoholic and aqueous solutions of PVP K-30 as aggregating and binder agent, at proportions of 5, 8 and 10%. The influence of the excipients (starch, cellulose or filler default) on the physical and technological properties of the granules was investigated. The pellets were produced by extrusionesferonization technique using isoniazid and microcrystalline cellulose MC 101 (at the proportion of 85:15) and aqueous solution of 1% Methocel as platelet. The pellets presented advantages over granular, such as: higher apparent density, smaller difference between apparent and compaction densities, smoother surface and, especially, smaller friability, and then were coated with an organic solution of Acrycoat L 100 ® in a fluidized bed. Different percentages of coating (15, 25 and 50%) were applied to the pellets which had their behavior evaluated in vitro by dissolution in acidic and basic medium. Rifampicin dissolution in the presence of uncoated and coated isoniazid pellets was evaluated too. The results indicate that the gastro resistance was only achieved with the greatest amount of coating and isoniazid is released successfully in basic step. The amount of rifampicin in the dissolution medium when the isoniazid pellets were not coated was lower than in the presence of enteric release pellets. Therefore, the polymer Acrycoat L 100 ® was efficient for coating with gastro-resistant function and can solve the problem of low bioavailability of rifampicin and help to reduce its dosage

Preparação e caracterização de complexos multicomponentes contendo ciclodextrinas com metotrexato

Conselho Nacional de Desenvolvimento Científico e Tecnológico

Dispersões sólidas de sinvastatina: preparação, caracterização, no estado sólido utilizando técnicas emergentes e estudo de estabilidade

This thesis aimed to assess the increase in solubility of simvastatin (SINV) with solid dispersions using techniques such as kneading (MA), co-solvent evaporation (ES), melting carrier (FC) and spray dryer (SD). Soluplus (SOL), PEG 6000 (PEG), PVP K-30 (PVP) e sodium lauryl sulphate (LSS) were used as carriers. The solid dispersions containing PEG [PEG-2(SD)], Soluplus [SOL-2(MA)] and sodium lauryl sulphate [LSS-2(ES)] were presented with a greater increase in solubility (5.02, 5.60 and 5.43 times respectively); analyses by ANOVA between the three groups did not present significant difference (p<0.05). In the phase solubility study, the calculation of the Gibbs free energy (ΔG) revealed that the spontaneity of solubilisation of SINV occurred in the order SOL>PEG >PVP 75%>LSS, always 80%. The phase diagrams of PEG and LSS presented solubilization stoichiometry of type 1:1 (type AL). The diagrams with PVP and SOL tend to 1:2 stoichiometry (type AL + AP). The stability coefficients (Ks) of the phase diagrams revealed that the most stable reactions occurred with LSS and PVP. The solid dispersions were characterized by Fourier transform infrared (FTIR), differential scanning calorimetry (DSC), scanning electron microscopy (SEM), particle size distribution (PSD), near-infrared spectroscopy imaging (NIR-CI) and X-ray diffraction of the powder using the Topas software (PDRX-TOPAS). The solid dispersion PEG-2(SD) presented the greatest homogeneity and the lowest degree of crystallinity (18.2%). The accelerated stability study revealed that the solid dispersions are less stable than SINV, with PEG-2(SD) being the least stable, confirmed by FTIR and DSC. The analyses by PDRX-TOPAS revealed the amorphous character of the dispersions and the mechanism of increasing solubility

The effects of macromolecular and serum supplements and oxygen tension during bovine in vitro procedures on kinetics of oocyte maturation and embryo development

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)