Identificação da fase sigma em uma junta soldada pelo processo TIG manual autógeno de um aço hiperduplex SAF 2707HD (UNS S32707) por difração de raios-x.

O aço inoxidável hiperduplex possui alta resistência a corrosão por pite em ambientes contendo cloretos, quando comparado a outros aços inoxidáveis comercialmente conhecidos. Possui boas propriedades mecânicas, com limite de escoamento superior a 700MPa e limite de resistência a tração em torno de 1000MPa. Essas propriedades o tornam muito atrativos para aplicações em ambientes contendo cloretos, e por isso tem tido destaque na indústria de óleo e gás, refinarias, plataformas offshore, etc. A liga hiperduplex é composta por uma estrutura bifásica, contendo proporções aproximadamente iguais de ferrita e austenita. Esse material possui boa soldabilidade, mas por ser termodinamicamente metaestável, em altas temperaturas pode ocorrer a precipitação de fases intermetálicas não desejáveis, o que resulta em perda de propriedades mecânicas e diminuição da resistência a corrosão. A fase sigma tem sido fortemente estudada, pois é comum sua precipitação nos aços inoxidáveis da família duplex durante o procedimento de soldagem se este não for muito bem controlado. A fase sigma precipita preferencialmente na fase ferrítica, devido a maior concentração de Cr e Mo, que são os elementos formadores da fase. A resistência a corrosão é reduzida e as propriedades mecânicas do material são alteradas o tornando frágil devido a presença da fase sigma. É formada entre 600C e 1000C e possui uma estrutura tetragonal complexa. O objetivo do trabalho foi identificar a possível presença da fase sigma na junta soldada do aço inoxidável hiperduplex SAF 2707 HD (UNS S32707) pelo processo TIG autógeno manual através da difração de raios-x. Nessa pesquisa, foram analisadas uma junta soldada do material pelo processo TIG autógeno manual com arco pulsado. Complementando o estudo foram analisadas seis amostras do aço inoxidável superduplex, sendo que cinco amostras sofreram tratamento térmico para a proposital formação da fase sigma. O refinamento do resultado da difração das amostras foi feito utilizando o método de Rietveld no software Topas Academic versão 4.1. O resultado da amostra soldada de hiperduplex apresentou as fases austenita, ferrita e alguns prováveis óxidos. Os resultados das amostras de superduplex tratadas termicamente apresentaram a fase sigma, conforme esperado na pesquisa, e as fases austenita e ferrita.

Geographical and morphological variation within and between colour phases inCoris julis(L. 1758), a protogynous marine fish

The possible differences between sexes in patterns of morphological variation in geographical space have been explored only in gonochorist freshwater species. We explored patterns of body shape variation in geographical space in a marine sequential hermaphrodite species, Coris julis (L. 1758), analyzing variation both within and between colour phases, through the use of geometric morphometrics and spatially-explicit statistical analyses. We also tested for the association of body shape with two environmental variables: temperature and chlorophyll a concentration, as obtained from time-series of satellite-derived data. Both colour phases showed a significant morphological variation in geographical space and patterns of variation divergent between phases. Although the morphological variation was qualitatively similar, individuals in the initial colour phase showed a more marked variation than individuals in the terminal phase. Body shape showed a weak but significant correlation with environmental variables, which was more pronounced in primary specimens.

South American streamflow and the extreme phases of the Southern Oscillation

This study investigates the extent of the affect [sic] of the El Niño/Southern Oscillation on South American streamflow. The response of South American precipitation and temperature to the extreme phases of ENSO (El Niño and La Niña events) is well documented; but the response of South American hydrology has been barely studied. Such paucity of research contrasts sharply with that available on the response of North American streamflow to ENSO events.

Growth phases of cultured algae used as larval food

A study was undertaken to determine the onset and duration of the growth phases of cultured algae commonly used as larval food (Skeletonema costatum, Chaetoceros calcitrans, Tetraselmis chuii, Chlorella vulgaris, Isochrysis galbana) so as to predict the time of harvest at the desired stage to suit various needs and purposes.

Assessment of the heavy metals among suspended particulates and dissolved phases in Suez Canal water

The concentrations and distribution of particulate and dissolved heavy metals, viz: Cu, Zn, Pb, Cd, Fe and Mn have been determined seasonally during 2003 in water samples collected from the Suez Canal. The presented data clarifies that the metals exhibited clear differences in their distribution between particulate and dissolved forms. The concentration of particulate heavy metals ranged between 0.09-3.13, 0.57-15.02, 0.18-3.87, 0.02-0.73, 2.74-49.62 and 0.15-5.08 µg/L for Cu, Zn, Pb, Cd, Fe and Mn, respectively. In the same respect, these values for dissolved forms were 0.28-4.12, 0.57-9.08, 0.27-2.50, 0.02-1.24, 1.94-42.50 and 0.11-3.65 µg/L. The concentrations of particulate metals viz: Zn, Pb, Cd, Fe and Mn were high was compared to the dissolved forms. Dissolved copper, rather than particulate, showed the highest percentage of total copper. The particulate forms of Pb, Cd, Fe and Mn always had higher concentrations than the dissolved forms during the course of study except in the summer season. The northern part of the Suez Canal at Port Said showed mean concentrations of particulate and dissolved Cu=1.43 and 2.10, Zn=8.61 and 3.17, Pb=1.72 and 1.23, Cd=0.35 and 0.35, Fe= 23.49 and 15.83 and Mn=2.09 and 1.82 µg/L. These high concentrations may be attributed to the greater activities, particularly loading and unloading operations at Port Said harbour s industrial effluents and domestic drainage of Port Said city. In contrast, the Sinai side could be considered as reference site, as it was almost clean, i.e., without harmful outfalls, where Cu=0.16 and 0.56, Zn=2.14 and 0.94, Pb=6.29 and 3.44, Cd=0.055 and 0.088, Fe=6.29 and 3.44 and Mn=0.56 and 0.26 µg/L for particulate and dissolved metals respectively.

Step by step: Breaking outsourcing down into manageable phases

The phases of the outsourcing process and the actions required are discussed. The most difficult and the most important phase of o a successful outsourcing process is to know what activities to outsource. The criteria for suppliers selection must be developed and should cover the reasons why the activity is being outsourced, the expected benefits and potential dangers. Contract negotiation is a very important phase of the outsourcing contract in which rules of the outsourcing are set. The transfer of activity phase corresponds to the reassignment of control of the outsourced activity from the outsourcer to the contractor.

Twisting transition between crystalline and fibrillar phases of aggregated peptides

We study two distinctly ordered condensed phases of polypeptide molecules, amyloid fibrils and amyloidlike microcrystals, and the first-order twisting phase transition between these two states. We derive a single free-energy form which connects both phases. Our model identifies relevant degrees of freedom for describing the collective behavior of supramolecular polypeptide structures, reproduces accurately the results from molecular dynamics simulations as well as from experiments, and sheds light on the uniform nature of the dimensions of different peptide fibrils. © 2012 American Physical Society.