Optimum design of a helicopter rotor for low vibration using aeroelastic analysis and response surface methods

An aeroelastic analysis based on finite elements in space and time is used to model the helicopter rotor in forward flight. The rotor blade is represented as an elastic cantilever beam undergoing flap and lag bending, elastic torsion and axial deformations. The objective of the improved design is to reduce vibratory loads at the rotor hub that are the main source of helicopter vibration. Constraints are imposed on aeroelastic stability, and move limits are imposed on the blade elastic stiffness design variables. Using the aeroelastic analysis, response surface approximations are constructed for the objective function (vibratory hub loads). It is found that second order polynomial response surfaces constructed using the central composite design of the theory of design of experiments adequately represents the aeroelastic model in the vicinity of the baseline design. Optimization results show a reduction in the objective function of about 30 per cent. A key accomplishment of this paper is the decoupling of the analysis problem and the optimization problems using response surface methods, which should encourage the use of optimization methods by the helicopter industry. (C) 2002 Elsevier Science Ltd. All rights reserved.

Conformational dynamics of HIV-1 protease: a comparative molecular dynamics simulation study with multiple amber force fields

Flap dynamics of HIV-1 protease (HIV-pr) controls the entry of inhibitors and substrates to the active site. Dynamical models from previous simulations are not all consistent with each other and not all are supported by the NMR results. In the present work, the er effect of force field on the dynamics of HIV-pr is investigated by MD simulations using three AMBER force fields ff99, ff99SB, and ff03. The generalized order parameters for amide backbone are calculated from the three force fields and compared with the NMR S2 values. We found that the ff99SB and ff03 force field calculated order parameters agree reasonably well with the NMR S2 values, whereas ff99 calculated values deviate most from the NMR order parameters. Stereochemical geometry of protein models from each force field also agrees well with the remarks from NMR S2 values. However, between ff99SB and ff03, there are several differences, most notably in the loop regions. It is found that these loops are, in general, more flexible in the ff03 force field. This results in a larger active site cavity in the simulation with the ff03 force field. The effect of this difference in computer-aided drug design against flexible receptors is discussed.

Nonlinear dynamic analysis of dragonfly inspired piezoelectrically driven flapping and pitching wing

The nonlinear equations for coupled elastic flapping-twisting motion of a dragonfly in- spired smart flapping wing are used for a flapping wing actuated from the root by a PZT unimorph in the piezofan configuration. Excitation by the piezoelectric harmonic force generates only the flap bending motion, which in turn, induces the elastic twist motion due to interaction between flexural and torsional vibrations modes. An unsteady aerodynamic model is used to obtain the aerodynamic forces. Numerical simulations are performed using a wing whose size is the same as the dragonfly Sympetrum Frequens wing. It is found that the value of average lift reaches to its maximum when the smart flapping wing is excited at a frequency closer to the natural frequency in torsion. Moreover, consideration of the elastic twisting of flapping wing leads to an increase in the lift force. It is also found that the flapping wing generates sufficient lift to support its own weight and carry a small pay- load. Therefore, the piezoelectrically actuated smart flapping wing based on the geometry of Sympetrum Frequens wing and undergoing flapping-twisting motions may be considered as a potential candidate for use in MAV applications.

Evidence for the role of Mycobacteriumtuberculosis RecG helicase in DNA repair and recombination

In order to survive and replicate in a variety of stressful conditions during its life cycle, Mycobacteriumtuberculosis must possess mechanisms to safeguard the integrity of the genome. Although DNA repair and recombination related genes are thought to play key roles in the repair of damaged DNA in all organisms, so far only a few of them have been functionally characterized in the tubercle bacillus. In this study, we show that M.tuberculosis RecG (MtRecG) expression was induced in response to different genotoxic agents. Strikingly, expression of MtRecG in Escherichiacoli recG mutant strain provided protection against mitomycin C, methyl methane sulfonate and UV induced cell death. Purified MtRecG exhibited higher binding affinity for the Holliday junction (HJ) compared with a number of canonical recombinational DNA repair intermediates. Notably, although MtRecG binds at the core of the mobile and immobile HJs, and with higher binding affinity for the immobile HJ, branch migration was evident only in the case of the mobile HJ. Furthermore, immobile HJs stimulate MtRecG ATPase activity less efficiently than mobile HJs. In addition to HJ substrates, MtRecG exhibited binding affinity for a variety of branched DNA structures including three-way junctions, replication forks, flap structures, forked duplex and a D-loop structure, but demonstrated strong unwinding activity on replication fork and flap DNA structures. Together, these results support that MtRecG plays an important role in processes related to DNA metabolism under normal as well as stress conditions.

Effect of hinged leaflets on vortex pair generation

We experimentally study the effect of having hinged leaflets at the jet exit on the formation of a two-dimensional counter-rotating vortex pair. A piston-cylinder mechanism is used to generate a starting jet from a high-aspect-ratio channel into a quiescent medium. For a rigid exit, with no leaflets at the channel exit, the measurements at a central plane show that the trailing jet in the present case is never detached from the vortex pair, and keeps feeding into the latter, unlike in the axisymmetric case. Passive flexibility is introduced in the form of rigid leaflets or flaps that are hinged at the exit of the channel, with the flaps initially parallel to the channel walls. The experimental arrangement closely approximates the limiting case of a free-to-rotate rigid flap with negligible structural stiffness, damping and flap inertia, as these limiting structural properties permit the largest flap openings. Using this arrangement, we start the flow and measure the flap kinematics and the vorticity fields for different flap lengths and piston velocity programs. The typical motion of the flaps involves a rapid opening and a subsequent more gradual return to its initial position, both of which occur when the piston is still moving. The initial opening of the flaps can be attributed to an excess pressure that develops in the channel when the flow starts, due to the acceleration that has to be imparted to the fluid slug between the flaps. In the case with flaps, two additional pairs of vortices are formed because of the motion of the flaps, leading to the ejection of a total of up to three vortex pairs from the hinged exit. The flaps' length (L-f) is found to significantly affect flap motions when plotted using the conventional time scale L/d, where L is the piston stroke and d is the channel width. However, with a newly defined time scale based on the flap length (L/L-f), we find a good collapse of all the measured flap motions irrespective of flap length and piston velocity for an impulsively started piston motion. The maximum opening angle in all these impulsive velocity program cases, irrespective of the flap length, is found to be close to 15 degrees. Even though the flap kinematics collapses well with L/L-f, there are differences in the distribution of the ejected vorticity even for the same L/L-f. Such a redistribution of vorticity can lead to important changes in the overall properties of the flow, and it gives us a better understanding of the importance of exit flexibility in such flows.

An experimental and numerical study of piezoceramic actuator hysteresis in helicopter active vibration control

An aeroelastic analysis is used to investigate the rate dependent hysteresis in piezoceramic actuators and its effect on helicopter vibration control with trailing edge flaps. Hysteresis in piezoceramic materials can cause considerable complications in the use of smart actuators as prime movers in applications such as helicopter active vibration control. Dynamic hysteresis of the piezoelectric stack actuator is investigated for a range of frequencies (5 Hz (1/rev) to 30 Hz (6/rev)) which are of practical importance for helicopter vibration analysis. Bench top tests are conducted on a commercially available piezoelectric stack actuator. Frequency dependent hysteretic behavior is studied experimentally for helicopter operational frequencies. Material hysteresis in the smart actuator is mathematically modeled using the theory of conic sections. Numerical simulations are also performed at an advance ratio of 0.3 for vibration control analysis using a trailing edge flap with an idealized linear and a hysteretic actuator. The results indicate that dynamic hysteresis has a notable effect on the hub vibration levels. It is found that the theory of conic sections offers a straight forward approach for including hysteresis into aeroelastic analysis.

Crystal structure of a putative aspartic proteinase domain of the Mycobacterium tuberculosis cell surface antigen PE_PGRS16

We report the crystal structure of the first prokaryotic aspartic proteinase-like domain identified in the genome of Mycobacterium tuberculosis. A search in the genomes of Mycobacterium species showed that the C-terminal domains of some of the PE family proteins contain two classic DT/SG motifs of aspartic proteinases with a low overall sequence similarity to HIV proteinase. The three-dimensional structure of one of them, Rv0977 (PE_PGRS16) of M. tuberculosis revealed the characteristic pepsinf-old and catalytic site architecture. However, the active site was completely blocked by the N-terminal His-tag. Surprisingly, the enzyme was found to be inactive even after the removal of the N-terminal His-tag. A comparison of the structure with pepsins showed significant differences in the critical substrate binding residues and in the flap tyrosine conformation that could contribute to the lack of proteolytic activity of Rv0977. (C) 2013 The Authors. Published by Elsevier B.V. on behalf of Federation of European Biochemical Societies. All rights reserved.

Mycobacterium tuberculosis DinG Is a Structure-specific Helicase That Unwinds G4 DNA IMPLICATIONS FOR TARGETING G4 DNA AS A NOVEL THERAPEUTIC APPROACH

The significance of G-quadruplexes and the helicases that resolve G4 structures in prokaryotes is poorly understood. The Mycobacterium tuberculosis genome is GC-rich and contains >10,000 sequences that have the potential to form G4 structures. In Escherichia coli, RecQ helicase unwinds G4 structures. However, RecQ is absent in M. tuberculosis, and the helicase that participates in G4 resolution in M. tuberculosis is obscure. Here, we show that M. tuberculosis DinG (MtDinG) exhibits high affinity for ssDNA and ssDNA translocation with a 5' -> 3' polarity. Interestingly, MtDinG unwinds overhangs, flap structures, and forked duplexes but fails to unwind linear duplex DNA. Our data with DNase I footprinting provide mechanistic insights and suggest that MtDinG is a 5' -> 3' polarity helicase. Notably, in contrast to E. coli DinG, MtDinG catalyzes unwinding of replication fork and Holliday junction structures. Strikingly, we find that MtDinG resolves intermolecular G4 structures. These data suggest that MtDinG is a multifunctional structure-specific helicase that unwinds model structures of DNA replication, repair, and recombination as well as G4 structures. We finally demonstrate that promoter sequences of M. tuberculosis PE_PGRS2, mce1R, and moeB1 genes contain G4 structures, implying that G4 structures may regulate gene expression in M. tuberculosis. We discuss these data and implicate targeting G4 structures and DinG helicase in M. tuberculosis could be a novel therapeutic strategy for culminating the infection with this pathogen.

Flexibility in flapping foil suppresses meandering of induced jet in absence of free stream

Thrust-generating flapping foils are known to produce jets inclined to the free stream at high Strouhal numbers St = fA/U-infinity, where f is the frequency and A is the amplitude of flapping and U-infinity is the free-stream velocity. Our experiments, in the limiting case of St —> infinity (zero free-stream speed), show that a purely oscillatory pitching motion of a chordwise flexible foil produces a coherent jet composed of a reverse Benard-Karman vortex street along the centreline, albeit over a specific range of effective flap stiffnesses. We obtain flexibility by attaching a thin flap to the trailing edge of a rigid NACA0015 foil; length of flap is 0.79 c where c is rigid foil chord length. It is the time-varying deflections of the flexible flap that suppress the meandering found in the jets produced by a pitching rigid foil for zero free-stream condition. Recent experiments (Marais et al., J. Fluid Mech., vol. 710, 2012, p. 659) have also shown that the flexibility increases the St at which non-deflected jets are obtained. Analysing the near-wake vortex dynamics from flow visualization and particle image velocimetry (PIV) measurements, we identify the mechanisms by which flexibility suppresses jet deflection and meandering. A convenient characterization of flap deformation, caused by fluid-flap interaction, is through a non-dimensional effective stiffness', EI* = 8 EI/(rho V-TEmax(2) s(f) c(f)(3)/2), representing the inverse of the flap deflection due to the fluid-dynamic loading; here, EI is the bending stiffness of flap, rho is fluid density, V-TEmax is the maximum velocity of rigid foil trailing edge, s(f) is span and c(f) is chord length of the flexible flap. By varying the amplitude and frequency of pitching, we obtain a variation in EI* over nearly two orders of magnitude and show that only moderate EI*. (0.1 less than or similar to EI * less than or similar to 1 generates a sustained, coherent, orderly jet. Relatively `stiff' flaps (EI* greater than or similar to 1), including the extreme case of no flap, produce meandering jets, whereas highly `flexible' flaps (EI* less than or similar to 0.1) produce spread-out jets. Obtained from the measured mean velocity fields, we present values of thrust coefficients for the cases for which orderly jets are observed.

Robust design of multiple trailing edge flaps for helicopter vibration reduction: A multi-objective bat algorithm approach

The objective of this study is to determine an optimal trailing edge flap configuration and flap location to achieve minimum hub vibration levels and flap actuation power simultaneously. An aeroelastic analysis of a soft in-plane four-bladed rotor is performed in conjunction with optimal control. A second-order polynomial response surface based on an orthogonal array (OA) with 3-level design describes both the objectives adequately. Two new orthogonal arrays called MGB2P-OA and MGB4P-OA are proposed to generate nonlinear response surfaces with all interaction terms for two and four parameters, respectively. A multi-objective bat algorithm (MOBA) approach is used to obtain the optimal design point for the mutually conflicting objectives. MOBA is a recently developed nature-inspired metaheuristic optimization algorithm that is based on the echolocation behaviour of bats. It is found that MOBA inspired Pareto optimal trailing edge flap design reduces vibration levels by 73% and flap actuation power by 27% in comparison with the baseline design.

Effect of mass loading on ionic polymer metal composite actuators and sensors

Ionic polymer metal composites (IPMC) actuator for flapping insect scale wing is advantageous due to its low mass, high deflection and simple actuation mechanism. Some of the factors that affect the actuation of IPMC are the amount of hydration in the polymer membrane and the environmental conditions such as temperature, humidity etc. In structural design, the attachment of wing on the IPMC actuators is an important concern as the attached wing increases the mass of actuators thereby affecting the parameters like displacement, stiffness and resonant frequencies. Such IPMC actuators have to produce sufficient actuation force and frequency to lift and flap the attached wing. Therefore, it is relevant to study the influence of attachment of wing on the actuator parameters (displacement, resonant frequency, block force and stiffness) and performance of the actuators. This paper is divided into two parts; the first part deals with the modeling of the IPMC actuators for its effect on the level of water uptake and temperature using energy based method. The modeling method adapted is validated with the experimental procedure used to actuate the IPMC. The second part deals with the experimental analysis of IPMC actuation at dry, wet and in water conditions. The effect of end mass loading on the performance of 20 Hz, high frequency actuator (HFA) and 8.7 Hz, low frequency IPMC actuators (LFA) and sensors is studied. The IPMC actuators are attached with IPMC flapping wing at its free end and performance analysis on the attached wing is also carried out.

Papel das hemaglutininas 67-72p de Corynebacterium diphtheriae na ligação a proteínas plasmáticas, superfícies celulares, invasão e indução de apoptose

Corynebacterium diphtheriae pode ser isolado tanto de quadros de difteria clássica, quanto de infecções sistêmicas, como endocardite. O fibrinogênio (Fbn) e a fibronectina (Fn) são glicoproteínas presentes na matriz extracelular de tecidos conjuntivos. A influência destas proteínas na patogênese das infecções locais e invasivas causadas por C. diphtheriae é objeto de estudo devido ao fato do bacilo diftérico poder ser encontrado em lesões nas quais o Fbn e a Fn são predominantes, incluindo a pseudomembrana diftérica e vegetações cardíacas presentes na endocardite infecciosa. São crescentes as evidências de que o C. diphtheriae pode, além de aderir, ser internalizado por células em cultura. No presente estudo, investigou-se a participação de C. diphtheriae e das proteínas de superfície 67-72p na aderência à Fn e ao Fbn de plasma humano e a eritrócitos. A aderência às células HEp-2 e internalização também foram analisadas. A participação de 67-72p nos mecanismos de morte celular foi avaliada através das colorações por Azul de Tripan e 46-diamidino-2-fenil indol (DAPI), pelo ensaio de redução utilizando dimetil-tiazol-difenil tetrazólio (MTT) e por citometria de fluxo. As 67-72p foram extraídas da superfície da amostra toxigênica C. diphtheriae subsp. mitis CDC-E8392 através de processos mecânicos e precipitação com sulfato de amônio saturado. Análises por SDS-PAGE e immunoblotting detectaram a presença das bandas protéicas de 67 e 72kDa nas amostras toxinogênicas e atoxinogênicas analisadas, as quais pertenciam aos biotipos fermentador e não fermentador de sacarose. C. diphtheriae foi capazes não só de formar agregados na presença de plasma de coelho, mas também de converter Fbn em fibrina independentemente da presença do gene tox. No entanto, a amostra atoxinogênica ATCC 27010 (tox-) foi menos aderente ao Fbn do que a homóloga ATCC 27012 (tox+). A interação bacteriana com eritrócitos foi inibida somente pela Fn. Ligações entre Fn e/ou Fbn com 67-72p foram demonstradas por dot blotting, ELISA e/ou ensaios utilizando fluorescência. As 67-72p foram capazes de inibir as interações bacterianas com o Fbn, indicando que 67-72p podem participar do processo de aderência do patógeno aos tecidos do hospedeiro. Através da microscopia óptica, demonstrou-se a ligação de 67-72p adsorvidas em microesferas de látex com células HEp-2. Anticorpos de coelho do tipo IgG anti 67-72p interferiram somente com a expressão do padrão de aderência do tipo difuso, normalmente apresentado pela amostra CDC-E8392. A Microscopia Eletrônica de Transmissão (MET) e a inibição da internalização bacteriana pela IgG anti 67-72p ou por 67-72p indicaram o papel de 67-72p como invasina. Alterações do citoesqueleto de células HEp-2 com acumulação de actina polimerizada, induzida por microesferas sensibilizadas com 67-72p, foi observada pelo fluorescent actin staining (FAS) test. Foi visualizado um aumento no número de bactérias viáveis no compartimento intracelular após tratamento de células HEp-2 ou dos microrganismos com Fn. A presença de partículas de látex adsorvidas com 67-72p no interior de vacúolos frouxos em células HEp-2 sugeriu que estas proteínas podem causar efeito citotóxico. A avaliação através das colorações com Azul de Tripan, DAPI e os ensaios de redução utilizando MTT demonstraram um decréscimo na viabilidade de células tratadas com 67-72p. As mudanças morfológicas observadas 3 horas após o início do tratamento com 67-72p incluíram vacuolização, fragmentação nuclear e formação de corpúsculos apoptóticos. A citometria de fluxo revelou um decréscimo de 15,13% no volume/tamanho de células tratadas com 67-72p. Além disso, o ensaio utilizando Iodeto de Propídio (IP) e Anexina V (AV)-FITIC demonstrou que havia 66,1% de células vivas (IP-/AV-), 16,6% de células em apoptose inicial (IP-/AV+) e 13,8% de células em apoptose tardia ou necrose secundária. Em conclusão, as 67-72p estão diretamente envolvidas na interação com Fn e Fbn. As proteínas não fimbriais 67-72p são hemaglutininas implicadas na aderência a células respiratórias e na internalização. Além disso, estas proteínas podem atuar como fatores de virulência em potencial para induzir apoptose de células epiteliais nos estágios iniciais da difteria e nas infecções invasivas causadas pelo C. diphtheriae

Alterações estruturais da matriz extracelular do prepúcio humano causadas pelo tabagismo

Os autores têm como objetivo, investigar a matriz extra celular, musculatura lisa e densidade vascular do prepúcio de pacientes tabagistas. Espécimes de prepúcio foram obtidas de 20 jovens adultos (média de idade= 27.2) submetidos a postectomia. Dentre os pacientes analisados, um grupo (n=10) possui história prévia de tabagismo (3 to 13 maços/ano, média = 5.8 3.2), e outro grupo (n=10) formam o grupo controle, não fumantes. A coloração de Tricrômico Masson foi utilizada para quantificar tecido conectivo, musculatura lisa e vasos. A coloração Resorcina-fucsina de Weigert foi utilizada para estabelecer as fibras do sistema elástico e a coloração, Vermelho de Picrosirius para o estudo do colágeno. O estudo estereológico foi realizado utilizando o software Image J, para determinar as densidades volumétricas. Para a análise bioquímica o colágeno total foi determinado em μg de hidroxiprolina por MG de tecido seco. O estudo estatístico foi realizado lançando mão do t-teste (p<0,05). Fibras do sistema elástico de fumantes apresentaram-se aumentadas em 42.5% quando comparado ao grupo controle (p=0,002). Em contraste, musculatura lisa (p=0,42) e densidade vascular (p=0,16) não mostraram nenhuma diferença estatística. Foi realizado uma análise quantitativa utilizando Vermelho de Picrosirius sob luz polarizada, que evidenciou a presença de colágeno tipo I e III, sem diferença estatisticamente significativa. A concentração total do colágeno não mostrou diferença entre tabagistas e o grupo controle. (73.1μg/mg 8.0 vs. 69.2μg/mg 5.9, respectivamente, p=0,23). Tabagismo está associado a um significante aumento de fibras do sistema elástico do tecido prepucial. Estes resultados podem, possivelmente, explicar os altos índices de falha na uretroplastia peniana, com uso de flap de prepúcio em fumantes

Participação do propranolol no reparo tecidual de lesões isquêmicas cutâneas em ratos

Receptores adrenérgicos são amplamente expressos em diferentes tecidos, incluindo na pele. Recentemente foi descoberto que bloqueadores dos receptores β-adrenérgicos são capazes de modular o processo de reparo tecidual. O propranolol é um β-bloqueador não seletivo largamente utilizado na prática clínica para o tratamento de doenças cardiovasculares, parecendo apresentar propriedades antioxidantes. O objetivo desse estudo foi avaliar a resposta de diferentes doses de propranolol durante a lesão isquêmica cutânea em roedores. Ratos Wistar foram tratados com propranolol nas concentrações de 3 e 6 mg/kg. O grupo controle recebeu apenas o veículo e o grupo controle positivo recebeu vitamina E (50 mg/kg/dia). A administração do propranolol iniciou-se no dia da lesão, sendo realizada diariamente até o sacrifício. Incisões bilaterais foram feitas no dorso de cada animal. O flap foi suturado e foram realizadas lesões excisionais totais entre as lesões incisionais. A contração das lesões foi avaliada e os cortes histológicos foram corados com hematoxilina e eosina e vermelho de picrosirius. Foram utilizadas também as seguintes técnicas: Dopplerfluxometria, análises bioquímicas, análise estereológica e expressão de PECAM-1. O grupo tratado com 3 mg de propranolol apresentou uma maior redução na área total da lesão quando comparado ao grupo controle. Da mesma forma, este grupo apresentou um aumento na densidade de vasos sanguíneos, uma maior expressão de PECAM-1 e aumento na perfusão sanguínea na pele isquêmica e no sítio da lesão quando comparado ao grupo controle. Não observamos efeito antioxidante do propranolol neste modelo. Em resumo, nós sugerimos que o propranolol quando administrado na dose de 3 mg/kg/dia foi capaz de modular a angiogênese e melhorar o fechamento da lesão em modelo de roedores

Análise do processo sinérgico da deglutição em pacientes portadores de bronquiectasia atendidos no Hospital Universitário Pedro Ernesto

A respiração e a deglutição são vitais para o homem. Enquanto a primeira diz respeito a um ato primitivo da vida, a hematose, a segunda trata da manutenção da vida, oferecendo a energia necessária, nutrindo e hidratando, perpassando pelo prazer alimentar, ato tão importante na sociedade contemporânea. A relação funcional entre essas funções ainda não foi totalmente elucidada, porém é crescente o interesse e o número de estudos sobre esta temática. Considerando que a deglutição eficiente tem como pressuposto a capacidade de proteger via aérea inferior, a alteração de deglutição primária ou secundária a um dano pulmonar pode trazer repercussões severas para a integridade do sistema respiratório. O objetivo desse estudo é analisar o processo sinérgico da deglutição em portadores de bronquiectasia, a fim de verificar se há alteração na fisiologia da deglutição e caracterizá-la, assim como, identificar se há correspondência entre alteração da função pulmonar e alteração da deglutição.Para tal foram selecionados randomicamente 30 pacientes na faixa etária de 18 a 65 anos, atendidos no ambulatório de bronquiectasia do HUPE. Destes, 26 indivíduos responderam a um questionário dirigido sobre hábitos alimentares e possíveis dificuldades de alimentação; foram submetidos à avaliação clínica da deglutição; 22 fizeram espirometria no setor de prova de função pulmonar no HUPE e 17 avaliação videofluoroscópica da deglutição. Dos 26 indivíduos estudados 10 eram homens e 16 mulheres, com média de idade de 46,3 anos. Na avaliação clínica da deglutição observaram-se alterações estruturais e funcionais em todos os indivíduos estudados. As principais alterações estruturais detectadas referem-se e a dinâmica laríngea; enquanto na avaliação funcional detectou-se alterações referentes à ejeção oral, dinâmica hiolaríngea, trânsito faríngeo e presença de deglutições múltiplas. Com relação à espirometria 06 indivíduos apresentaram distúrbio obstrutivo leve; 04 distúrbio obstrutivo moderado e 09 distúrbio obstrutivo acentuado. A videofluoroscopia da deglutição corroborou os achados da avaliação clínica da deglutição e evidenciou episódios de penetração e aspiração laríngea Pode-se concluir que: (1) a avaliação clínica da deglutição associada à avaliação videofluoroscópica são métodos eficientes para a análise do processo sinérgico da deglutição; (2) identificou-se alteração do processo sinérgico da deglutição, nos indivíduos avaliados; (3) a ausculta cervical isoladamente, não demonstrou ser um método eficiente para predizer aspiração e/ou penetração laringotraqueal; (4) houve correspondência entre os resultados da avaliação clínica funcional da deglutição e videofluoroscópica, exceto quanto a presença de penetração e/ou aspiração e quanto a capacidade de avaliar a ejeção oral; (5) não foi possível identificar se há correspondência entre alteração da função pulmonar e processo sinérgico da deglutição.