Si3N4 single-crystal nanowires grown from silicon micro- and nanoparticles near the threshold of passive oxidation

A simple and most promising oxide-assisted catalyst-free method is used to prepare silicon nitride nanowires that give rise to high yield in a short time. After a brief analysis of the state of the art, we reveal the crucial role played by the oxygen partial pressure: when oxygen partial pressure is slightly below the threshold of passive oxidation, a high yield inhibiting the formation of any silica layer covering the nanowires occurs and thanks to the synthesis temperature one can control nanowire dimensions

Passive smoking exposure in adults and dynamics of respiratory symptoms in a prospective multicenter cohort studies (SAPALDIA study)

Résumé Objectifs : Alors que de nombreuses études suggèrent que l'exposition au tabagisme passif représente un danger pour la santé des non-fumeurs, la plupart des études s'intéressant aux effets néfastes du tabagisme passif sur la santé respiratoire de sujets adultes étaient des études transversales. Les résultats d'études longitudinales restent rares et controversés. Le but de notre étude était de mesurer les effets d'une exposition antérieure au tabagisme passif sur l'évolution journalière de quatre catégories de symptômes respiratoires dans une étude journalière incluant des adultes n'ayant jamais fumé. Méthodes : Dans le cadre de l'étude SAPALDIA (Swiss study on air pollution and lung diseases in adults), nous avons mené une étude de cohorte prospective et multicentrique. 1421 adultes n'ayant jamais fumé étaient suivis durant deux ans sur la base de questionnaires journaliers remplis durant une à six périodes de quatre semaines répartis sur deux années (1992-1993). Nous avons ensuite déterminé le risque relatif (RR) de développer ou de s'amender de symptômes respiratoires en association avec une exposition antérieure au tabagisme passif. Résultats : Dans un échantillon d'adultes n'ayant jamais fumé, nous avons trouvé une association entre une exposition antérieure au tabagisme passif et une évolution péjorée de tous les symptômes respiratoires étudiés, montrant un risque relatif de 1.09 à 1.21 de développer les symptômes respiratoires, et un risque relatif de 0.91 à 0.83 de s'amender de ces symptômes. Une exposition au tabagisme passif sur la place de travail était associée à une diminution de la durée des intervalles libres sans symptômes bronchitiques (RR 1.33) et asthmatiques (RR 1.27), alors qu'une exposition uniquement en-dehors de la place de travail était associée avec un allongement de la durée des épisodes avec symptômes respiratoires des voies aériennes hautes ou basses (RR 0.78-0.77). Conclusion : Nos résultats suggèrent que l'exposition au tabagisme passif a des effets néfastes sur la dynamique journalière symptômes respiratoires, et que l'importance et le type d'effet sont influencés par le lieu d'exposition.

L'équité d'accès aux ressources en eau : fin ou moyen d'amélioration de l'efficacité de l'irrigation ? : la gestion des ressources en eau dans l'état du Gujarat (Inde) dans la perpective de la political ecology

La thèse présentée ici est le résultat d'une étroite collaboration avec une ONG indienne, AKRSP(I), intervenant dans le développement de l'irrigation au Gujarat depuis plus de 25 ans. Un SIG prototype a été mis en oeuvre et nous permet de proposer ime analyse spatiale et quantitative de l'action de cette ONG ainsi qu'une réflexion plus générale sur les leviers de mise en valeur et de gestion des ressources en eau à des fins agricoles. On peut souligner trois principaux enseignements: Les perspectives d'application des SIG au sein des ONG sont manifestes. Les exigences des bailleurs de fonds peuvent néanmoins faire obstacle à leur développement car, indi-rectement, ils favorisent la mise en oeuvre de SI voués à la justification plutôt qu'à la planification et au suivi des programmes d'actions. Ce résultat soulève la question de la pertinence de l'encadrement, des critères d'évaluation et de la conditionnalité de l'aide publique au développement. Les ONG ont un fort potentiel pour participer à la mise en valeur des ressources en eau en Inde et aider à relever le défi agro-démographique indien, en particulier dans les zones marginales où les services étatiques sont en retrait. Les stratégies d'action basées principalement sur l'application des instruments économiques et techniques doivent cependant être modifiées. Nous montrons qu'elles favorisent une inégalité d'accès aux ressources qui débouche sur une efficacité limitée des pratiques d'irrigation, sur un plan agro-technique. Ces résultats soulignent la nécessité de poursuivre une réflexion critique des discours et solutions dominants en matière de gestion des ressources en eau. Deux pistes d'amélioration sont avancées: 1. considérer l'équité d'accès comme un moyen d'optimiser la gestion de la ressource (limiter le volume d'eau par agriculteur pour encourager les choix de cultures irriguées peu consommatrices et l'adoption des technologies d'économie d'eau), 2. prêter attention à l'ordre dans lequel les différents instruments de gestion disponibles sont employés afin de les articuler dans un séquençage temporel pertinent. La Political Ecology apparait comme un cadre conceptuel très pertinent pour engager cette réflexion critique. Elle permet d'intégrer différentes échelles d'asymétries de pouvoirs à la compréhension des situations et des blocages observables localement : inégalités de capabilités et forces socio-politiques à l'échelle locale, politiques agro-industrielles (coton) et jeux d'alliances politiques des castes à l'échelle nationale, discours et conflits idéologiques ou orientations stratégiques des bailleurs de fonds à l'échelle internationale... Notre recherche empirique contribue modestement au développement de cette Political Ecology de la mise en valeur et de la gestion des ressources en eau. - The present research is based on a close collaboration with an indian NGO, AKRSP(I), which is active in the development of irrigation facilities in Gujarat for the past 25 years. We built a GIS prototype providing quantitative and spatial datas to analyse the NGO intervention and propose a general reflection about water resources development and management issues. Three main findings may be emphasized : The potential of GIS within the workings of an NGO is obvious, as an information ma-nagement tool as much as for developing analytical capacity. However, financial backers expectations may not favour a relevant development of this technology. Indirectly, they promote Information Systems built to justify rather than to plan or monitor action pro¬grammes. This raises the question of stricter framework, conditionality criters and stan¬dardised assessment indicators surrounding official development assistance. There is strong potential that NGOs can assist with the improvement of water resources in India. They can help in overcoming Indian demographic-related agricultural challenges, especially in marginal rural areas neglected by state services. However, intervention strategies mainly based on technical and economic management tools has to be adapted. We found that they lead to inequitable access and distribution of water resources what induces a low efficiency of irrigation practices from an agro-technical point of view. These results underline the need to go further in criticizing dominant ideas and guidelines regarding water resources management. We suggest two other options : 1. to consider equitable access has a tool to improve the effective use of water for agricul¬tural purposes (limiting the volume of water available per farmer would encourage them to adopt low water consumption crops and water saving technics), 2. to consider more carefully the order of use of the various management tools available and to structure them in a relevant sequence. Here, Political Ecology seems to be a relevant conceptual framework to enter into such a critical reflection, integrating different levels and scales of political asymmetries at the core of environmental issues. Indeed, the understanding of regional water situations and social stumbling blocks needs not only to consider local capabilities and socio-political inequities, but also agro-industrial policy (e.i. cotton) and caste political alliances at a national scale, as well as ideological and narrative struggles or strategical orientations of financial backers at an international level. Our empirical research modestly contributes to the development of such a Political Ecology of water resources development and management.

Comparison of Setting Time Measured Using Ultrasonic Wave Propagation with Saw-Cutting Times on Pavements, TR-675, 2015

At present, there is little fundamental guidance available to assist contractors in choosing when to schedule saw cuts on joints. To conduct pavement finishing and sawing activities effectively, however, contractors need to know when a concrete mixture is going to reach initial set, or when the sawing window will open. Previous research investigated the use of the ultrasonic pulse velocity (UPV) method to predict the saw-cutting window for early entry sawing. The results indicated that the method has the potential to provide effective guidance to contractors as to when to conduct early entry sawing. The aim of this project was to conduct similar work to observe the correlation between initial setting and conventional sawing time. Sixteen construction sites were visited in Minnesota and Missouri over a two-year period. At each site, initial set was determined using a p-wave propagation technique with a commercial device. Calorimetric data were collected using a commercial semi-adiabatic device at a majority of the sites. Concrete samples were collected in front of the paver and tested using both methods with equipment that was set up next to the pavement during paving. The data collected revealed that the UPV method looks promising for early entry and conventional sawing in the field, both early entry and conventional sawing times can be predicted for the range of mixtures tested.

Estimating water application efficiency for drip irrigation emitter patterns on banana

The objective of this work was to evaluate root and water distribution in irrigated banana (Musa sp.), in order to determine the water application efficiency for different drip irrigation emitter patterns. Three drip emitter patterns were studied: two 4-L h-1 emitters per plant (T1), four 4-L h-1 emitters per plant (T2), and five 4-L h-1 emitters per plant (T3). The emitters were placed in a lateral line. In the treatment T3, the emitters formed a continuous strip. The cultivated area used was planted with banana cultivar BRS Tropical, with a 3-m spacing between rows and a 2.5-m spacing between plants. Soil moisture and root length data were collected during the first production cycle at five radial distances and depths, in a 0.20x0.20 m vertical grid. The experiment was carried out in a sandy clay loam Xanthic Hapludox. Soil moisture data were collected every 10 min for a period of five days using TDR probes. Water application efficiency was of 83, 88 and 92% for the systems with two, four and five emitters per plant, respectively. It was verified that an increase in the number of emitters in the lateral line promoted better root distribution, higher water extraction, and less deep percolation losses.

Leaf miner incidence in coffee plants under different drip irrigation regimes and planting densities

The objective of this work was to evaluate the effect of different drip irrigation regimes and planting densities on the incidence of the leaf miner, Leucoptera coffeella, in arabica coffee plants for one year. The experiment was carried out in 2008, in a complete randomized block design, in a split-plot in time arrangement, with four replicates. The treatments consisted of four drip irrigation regimes - soil water balance, irrigations at 20 and 60 kPa soil tensions, and a nonirrigated treatment -, which were distributed at three plant densities: 2, 500, 5, 000, and 10, 000 plants per hectare. The evaluations were made on a monthly basis between January and December 2008. The highest pest occurrence period was from August to November, a season with low-air relative humidity preceded by a drought period. Irrigated coffee plants showed an incidence of intact mines 2.2 times lower than that of nonirrigated plants. Irrigation and increasing of plant density contribute to the reduction of coffee leaf miner occurrence.

From rifting to passive margin - The examples of the Red Sea, Central Atlantic and Alpine Tethys

Evolution of the Red Sea/Gulf of Suez and the Central Atlantic rift systems shows that an initial, transtensive rifting phase, affecting a broad area around the future zone of crustal separation, was followed by a pre-oceanic rifting phase during which extensional strain was concentrated on the axial rift zone. This caused lateral graben systems to become inactive and they evolved into rift-rim basins. The transtensive phase of diffuse crustal extension is recognized in many intra-continental rifts. If controlling stress systems relax, these rifts abort and develop into palaeorifts. If controlling stress systems persist, transtensive rift systems can enter the pre-oceanic rifting stage, during which the rift zone narrows and becomes asymmetric as a consequence of simple-shear deformation at shallow crustal levels and pure shear deformation at lower crustal and mantle-lithospheric levels. Preceding crustal separation, extensional denudation of the lithospheric mantle is possible. Progressive lithospheric attenuation entails updoming of the asthenosphere and thermal doming of the rift shoulders. Their uplift provides a major clastic source for the rift basins and the lateral rift-rim basins. Their stratigraphic record provides a sensitive tool for dating the rift shoulder uplift. Asymmetric rifting leads to the formation of asymmetric continental margins, corresponding in a simple-shear model to an upper plate and a conjugate lower plate margin, as seen in the Central Atlantic passive margins of the United States and Morocco. This rifting model can be successfully applied to the analysis of the Alpine Tethys palaeo-margins (such as Rif and the Western Alps).

Constant and variable amplitude fatigue strength of high strength steel welds treated with ultrasonic impact treatment

Hitsattujen rakenteiden väsymiskestävyyttä pystytään parantamaan jälkikäsittelymenetelmillä, joistayksi, ultraäänikäsittely muokkaa hitsin geometriaa ja aiheuttaa puristusjäännösjännitystilan. Tässä tutkimuksessa verrataan kokeellisesti kuormaa kantamattoman hitsatun ja ui -käsitellyn rivan väsymislujuutta toisiinsa. Tutkimusohjelmaan kuuluu kahta teräslajia ja sekä vakio - että vaihtuva - amplitudista kuormitusta. Ultraäänikäsittelyllä saavutetaan väsymiskestoiän parantuminen vakio - ja vaihtuva - amplitudisella kuormituksella. Perusaineen lujuudella ei ole merkittää vaikutusta väsymislujuuteen kun liitos on hitsatussa tilassa. Tällöin väsymiskestävyyden määrää hitsin rajaviivan jännityskeskittymä. Ultraäänikäsitellyn hitsatunliitoksen väsymiskestävyys on suurempi korkeamman lujuuden omaavilla teräksillä. Tästä syystä korkealujuuksisten terästen käyttö ultraäänikäsiteltynä väsyttävästi kuormitetuissa kevytrakenteissa on perusteltua.

A novel approachfor assessing the fatigue strength of ultrasonic impact treated welded structures.

It is commonly observed that complex fabricated structures subject tofatigue loading fail at the welded joints. Some problems can be corrected by proper detail design but fatigue performance can also be improved using post-weld improvement methods. In general, improvement methods can be divided into two main groups: weld geometry modification methods and residual stress modification methods. The former remove weld toe defects and/or reduce the stress concentrationwhile the latter introduce compressive stress fields in the area where fatigue cracks are likely to initiate. Ultrasonic impact treatment (UIT) is a novel post-weld treatment method that influences both the residual stress distribution andimproves the local geometry of the weld. The structural fatigue strength of non-load carrying attachments in the as-welded condition has been experimentally compared to the structural fatigue strength of ultrasonic impact treated welds. Longitudinal attachment specimens made of two thicknesses of steel S355 J0 have been tested for determining the efficiency of ultrasonic impacttreatment. Treated welds were found to have about 50% greater structural fatigue strength, when the slope of the S-N-curve is three. High mean stress fatigue testing based on the Ohta-method decreased the degree of weld improvement only 19%. This indicated that the method could be also applied for large fabricated structures operating under high reactive residual stresses equilibrated within the volume of the structure. The thickness of specimens has no significant effect tothe structural fatigue strength. The fatigue class difference between 5 mm and 8 mm specimen was only 8%. It was hypothesized that the UIT method added a significant crack initiation period to the total fatigue life of the welded joints. Crack initiation life was estimated by a local strain approach. Material parameters were defined using a modified Uniform Material Law developed in Germany. Finite element analysis and X-ray diffraction were used to define, respectively, the stress concentration and mean stress. The theoretical fatigue life was found to have good accuracy comparing to experimental fatigue tests.The predictive behaviour of the local strain approach combined with the uniformmaterial law was excellent for the joint types and conditions studied in this work.

Guidelines for irrigation scheduling of banana crop in São Francisco Valley, Brazil. I - Root distribution and activity

In order to establish guidelines for irrigation water management of banana cv. Pacovan (AAB group, Prata sub-group) in Petrolina County, northeastern Brazil, the root distribution and activity were measured on an irrigated plantation, in a medium texture soil, with plants spaced in a 3 x 3 m grid. Root distribution was evaluated by the soil profile method aided by digital image analysis, while root activity was indirectly determined by the changing of soil water content and by the direction of soil water flux. Data were collected since planting in January 1999 to the 3rd harvest in September 2001. Effective rooting depth increased from 0.4 m at 91 days after planting (dap), to 0.6 m at 370, 510, and 903 dap, while water absorption by roots was predominantly in the top 0,6 m.

Guidelines for irrigation scheduling of banana crop in São Francisco Valley, Brazil. II - Water consumption, crop coefficient, and physiologycal behavior

The water consumption and the crop coefficient of the banana cv. Pacovan were estimated in Petrolina County, northeastern Brazil, in order to establish guidelines to irrigation water management. Evaluations were carried out since planting in January 1999 to the 3rd harvest in September 2001 on a microsprinkler irrigated orchard, with plants spaced in a 3 x 3 m grid. Average daily water consumption was 3.9, 4.0, and 3.3 mm in the 1st, 2nd and 3rd growing seasons, respectively. Crop coefficient values increased from 0.7 (vegetative growth) to 1.1 (flowering). Even with high soil water availability, transpiration was reduced due to high evaporative demand.

Comparison between land suitability and actual crop distribution in an irrigation district of the Ebro valley (Spain)

El objetivo de la presente investigación fue analizar la correspondencia entre los resultados de una evaluación de tierras con la distribución real de los cultivos. Para ello la aptitud biofísica de las tierras se comparó con diferentes tipologías de frecuencia de ocurrencia de los cultivos y rotaciones derivadas de mapas de cultivos multitemporales. La investigación fue llevada a cabo en el distrito de riego de Flumen (33.000 ha), localizado en el valle del Ebro (NE España). La evaluación de tierras se basó en una cartografía de suelos 1:100.000, según el esquema FAO, para los principales cultivos presentes en el área de estudio (alfalfa, cereales de invierno, maíz, arroz y girasol). Se utilizaron tres mapas de frecuencia de cultivos y un mapa de rotaciones, derivado de una serie temporal de imágenes Landsat TM y ETM+ del periodo 1993-2000, y se compararon con los mapas de aptitud de tierras para los diferentes cultivos. Se analizó estadísticamente (Pearson χ2, Cramer V, Gamma y Somers D) la relación entre los dos tipos de variables. Los resultados muestran la existencia de una relación significativa (P=0,001) entre la localización de los cultivos y la idoneidad de las tierras, excepto de cultivos oportunistas como el girasol, muy influenciado por las subvenciones en el periodo estudiado. Las rotaciones basadas en la alfalfa muestran los mayores porcentajes (52%) de ocupación en las tierras más aptas para la agricultura en el área de estudio. El presente enfoque multitemporal de análisis de la información ofrece una visión más real que la comparación entre un mapa de evaluación de tierras y un mapa de cultivos de una fecha determinada, cuando se valora el grado de acuerdo entre las recomendaciones sobre la aptitud de las tierras y los cultivos realmente cultivados por los agricultores.

Performance of an ultrasonic ranging sensor in apple tree canopies

Electronic canopy characterization is an important issue in tree crop management. Ultrasonic and optical sensors are the most used for this purpose. The objective of this work was to assess the performance of an ultrasonic sensor under laboratory and field conditions in order to provide reliable estimations of distance measurements to apple tree canopies. To this purpose, a methodology has been designed to analyze sensor performance in relation to foliage ranging and to interferences with adjacent sensors when working simultaneously. Results show that the average error in distance measurement using the ultrasonic sensor in laboratory conditions is ±0.53 cm. However, the increase of variability in field conditions reduces the accuracy of this kind of sensors when estimating distances to canopies. The average error in such situations is ±5.11 cm. When analyzing interferences of adjacent sensors 30 cm apart, the average error is ±17.46 cm. When sensors are separated 60 cm, the average error is ±9.29 cm. The ultrasonic sensor tested has been proven to be suitable to estimate distances to the canopy in field conditions when sensors are 60 cm apart or more and could, therefore, be used in a system to estimate structural canopy parameters in precision horticulture.

Effect of water velocity on the uptake of polychlorinatedd biphenyls (PCBs) by silicone rubber (SR) and low-density polyethylene (LDPE) passive samplers: an assessment of the efficiency of performance reference compounds (PRCs) in river-like flow conditions

One aim of this study is to determine the impact of water velocity on the uptake of indicator polychlorinated biphenyls (iPCBs) by silicone rubber (SR) and low-density polyethylene (LDPE) passive samplers. A second aim is to assess the efficiency of performance reference compounds (PRCs) to correct for the impact of water velocity. SR and LDPE samplers were spiked with 11 or 12 PRCs and exposed for 6 weeks to four different velocities (in the range of 1.6 to 37.7 cm s−1) in river-like flow conditions using a channel system supplied with river water. A relationship between velocity and the uptakewas found for each iPCB and enables to determine expected changes in the uptake due to velocity variations. For both samplers, velocity increases from 2 to 10 cm s−1, 30 cm s−1 (interpolated data) and 100 cm s−1 (extrapolated data) lead to increases of the uptake which do not exceed a factor of 2, 3 and 4.5, respectively. Results also showed that the influence of velocity decreased with increasing the octanol-water coefficient partition (log Kow) of iPCBs when SR is used whereas the opposite effect was observed for LDPE. Time-weighted average (TWA) concentrations of iPCBs in water were calculated from iPCB uptake and PRC release. These calculations were performed using either a single PRC or all the PRCs. The efficiency of PRCs to correct the impact of velocity was assessed by comparing the TWA concentrations obtained at the four tested velocities. For SR, a good agreement was found among the four TWA concentrations with both methods (average RSD b 10%). Also for LDPE, PRCs offered a good correction of the impact of water velocity (average RSD of about 10 to 20%). These results contribute to the process of acceptance of passive sampling in routine regulatory monitoring programs.

Ultrasonic and LIDAR sensors for electronic canopy characterization in vineyards: advances to improve pesticide application methods

Canopy characterization is a key factor to improve pesticide application methods in tree crops and vineyards. Development of quick, easy and efficient methods to determine the fundamental parameters used to characterize canopy structure is thus an important need. In this research the use of ultrasonic and LIDAR sensors have been compared with the traditional manual and destructive canopy measurement procedure. For both methods the values of key parameters such as crop height, crop width, crop volume or leaf area have been compared. Obtained results indicate that an ultrasonic sensor is an appropriate tool to determine the average canopy characteristics, while a LIDAR sensor provides more accuracy and detailed information about the canopy. Good correlations have been obtained between crop volume (CVU) values measured with ultrasonic sensors and leaf area index, LAI (R2 = 0.51). A good correlation has also been obtained between the canopy volume measured with ultrasonic and LIDAR sensors (R2 = 0.52). Laser measurements of crop height (CHL) allow one to accurately predict the canopy volume. The proposed new technologies seems very appropriate as complementary tools to improve the efficiency of pesticide applications, although further improvements are still needed.