Health monitoring of a new hysteretic damper subjected to earthquakes on a shaking table

This paper presents the experimental results obtained by applying frequency-domain structural health monitoring techniques to assess the damage suffered on a special type of damper called Web Plastifying Damper (WPD). The WPD is a hysteretic type energy dissipator recently developed for the passive control of structures subjected to earthquakes. It consists of several I-section steel segments connected in parallel. The energy is dissipated through plastic deformations of the web of the I-sections, which constitute the dissipative parts of the damper. WPDs were subjected to successive histories of dynamically-imposed cyclic deformations of increasing magnitude with the shaking table of the University of Granada. To assess the damage to the web of the I-section steel segments after each history of loading, a new damage index called Area Index of Damage (AID) was obtained from simple vibration tests. The vibration signals were acquired by means of piezoelectric sensors attached on the I-sections, and non-parametric statistical methods were applied to calculate AID in terms of changes in frequency response functions. The damage index AID was correlated with another energy-based damage index-ID- which past research has proven to accurately characterize the level of mechanical damage. The ID is rooted in the decomposition of the load-displacement curve experienced by the damper into the so-called skeleton and Bauschinger parts. ID predicts the level of damage and the proximity to failure of the damper accurately, but it requires costly instrumentation. The experiments reported in this paper demonstrate a good correlation between AID and ID in a realistic seismic loading scenario consisting of dynamically applied arbitrary cyclic loads. Based on this correlation, it is possible to estimate ID indirectly from the AID, which calls for much simpler and less expensive instrumentation.

Direct radiocarbon dates for Vindija G1 and Velika Pećina Late Pleistocene hominid remains

New accelerator mass spectrometry radiocarbon dates taken directly on human remains from the Late Pleistocene sites of Vindija and Velika Pećina in the Hrvatsko Zagorje of Croatia are presented. Hominid specimens from both sites have played critical roles in the development of current perspectives on modern human evolutionary emergence in Europe. Dates of ≈28 thousand years (ka) before the present (B.P.) and ≈29 ka B.P. for two specimens from Vindija G1 establish them as the most recent dated Neandertals in the Eurasian range of these archaic humans. The human frontal bone from Velika Pećina, generally considered one of the earliest representatives of modern humans in Europe, dated to ≈5 ka B.P., rendering it no longer pertinent to discussions of modern human origins. Apart from invalidating the only radiometrically based example of temporal overlap between late Neandertal and early modern human fossil remains from within any region of Europe, these dates raise the question of when early modern humans first dispersed into Europe and have implications for the nature and geographic patterning of biological and cultural interactions between these populations and the Neandertals.

Hippocampal acetylcholine release during memory testing in rats: augmentation by glucose.

Several lines of evidence indicate that a modest increase in circulating glucose levels enhances memory. One mechanism underlying glucose effects on memory may be an increase in acetylcholine (ACh) release. The present experiment determined whether enhancement of spontaneous alternation performance by systemic glucose treatment is related to an increase in hippocampal ACh output. Samples of extracellular ACh were assessed at 12-min intervals using in vivo microdialysis with HPLC-EC. Twenty-four minutes after an intraperitoneal injection of saline or glucose (100, 250, or 1000 mg/kg), rats were tested in a four-arm cross maze for spontaneous alternation behavior combined with microdialysis collection. Glucose at 250 mg/kg, but not 100 or 1000 mg/kg, produced an increase in spontaneous alternation scores (69.5%) and ACh output (121.5% versus baseline) compared to alternation scores (44.7%) and ACh output (58.9% versus baseline) of saline controls. The glucose-induced increase in alternation scores and ACh output was not secondary to changes in locomotor activity. Saline and glucose (100-1000 mg/kg) treatment had no effect on hippocampal ACh output when rats remained in the holding chamber. These findings suggest that glucose may enhance memory by directly or indirectly increasing the release of ACh. The results also indicate that hippocampal ACh release is increased in rats performing a spatial task. Moreover, because glucose enhanced ACh output only during behavioral testing, circulating glucose may modulate ACh release only under conditions in which cholinergic cells are activated.

Investigação da atividade apoptótica na abertura luminal dos ductos das glândulas salivares: análise comparativa entre modelo animal e humano

As glândulas salivares são estruturas essenciais para a manutenção da homeostase da cavidade oral pela síntese e secreção do fluido salivar. A disfunção ou perda permanente das glândulas salivares causadas por radioterapia, doenças inflamatórias ou desordens congênitas elevam principalmente o risco de infecções da mucosa oral e de estruturas dentárias, além de potencialmente prejudicar funções fisiológicas como fala, mastigação e paladar, diretamente interferindo na qualidade de vida dos indivíduos afetados. Os tratamentos atualmente disponíveis são apenas paliativos, ressaltando a necessidade de se compreender melhor os processos embriogênicos a fim de desenvolver novas estratégias terapêuticas capazes de regenerar as glândulas salivares. O princípio da formação das glândulas salivares baseia-se na coordenação de diversos processos morfogenéticos, e este trabalho foca particularmente em investigar a formação do espaço luminal do sistema de ductos, uma vez que a adequada abertura dos lumens é um processo essencial para a secreção salivar. Relata-se que a remoção das células centrais dos cordões sólidos epiteliais por morte celular apoptótica é o principal mecanismo de abertura do espaço luminal dos futuros ductos glandulares em camundongos. Porém, pouco se sabe sobre o controle temporal da apoptose durante o desenvolvimento glandular e sobre seu comportamento em glândulas salivares humanas. Neste trabalho, o perfil de expressão de diversas proteínas envolvidas na cascata apoptótica em glândulas salivares fetais humanas foi analisado de acordo com cada estágio morfogenético por imunoistoquímica (Bax, Bak, Bad, Bid, Bcl-2, Bcl-x, Bcl-xL, caspase-3 clivada, caspases-6, -7 e -9, apaf-1, survivina e citocromo c). As análises semi-qualitativas resultaram em negatividade apenas para as proteínas Bcl-2, Bad, Bid e caspase-3 clivada em todas as fases de desenvolvimento. A expressão nuclear de Bax e Bak foi identificada em presumidos espaços luminais em estágios precoces, enquanto Bcl-xL foi o fator antiapoptótico da família Bcl-2 que exibiu expressão nuclear mais importante. Caspases-6, -7 e -9 foram positivas em todas as fases, e a ausência de caspase-3 clivada sugere caspase-7 como principal caspase efetora da apoptose em desenvolvimento de glândulas salivares humanas. Ambos os componentes do complexo apoptossomo foram positivos durante o desenvolvimento glandular, e o inibidor survivina demonstrou mais positividade nuclear em estágios mais avançados. Ao observar a expressão de reguladores apoptóticos durante o desenvolvimento glandular humano, foram realizados experimentos funcionais com culturas de tecido glandular de camundongos para avaliar o papel das caspases durante a formação desta estrutura. Inicialmente detectou-se a atividade apoptótica em glândulas salivares de camundongos albinos no centro dos cordões epiteliais primários a partir de estágios precoces de desenvolvimento através de TUNEL e caspase-3 clivada. A partir disso, foi realizada a inibição apoptótica funcional in vitro durante o mesmo período, que resultou em ductos significativamente mais amplos e em defeitos morfológicos importantes nas estruturas luminal e acinar. Este trabalho evidenciou portanto atividade apoptótica durante a formação de glândulas salivares humanas e de camundongo, expressando-se em fases mais precoces do que reportadas anteriormente. Além disso, a ausência de Bad e Bid indica que a via intrínseca está mais ativa que a extrínseca, e distintos perfis de expressão da maioria das moléculas sugere adicionais funções não-apoptóticas durante a morfogênese glandular.

The Relationships Between Child Maltreatment and Exploratory Behavior Implications for Development.

Findings from the fields of attachment theory, physiology, neurology, neurobiology and cognitive theory, when considered together, enhance understanding of the behavior and development of maltreated children. Each field describes from its own vantage how emotional trauma influences the quality and quantity of exploratory behavior. Development in many spheres is influemced by behavior. There is evidence from the field of neurobiology that experience ultimately influences the anatomy of the brain. Therefore, it can be hypothesized that constricted, overly defensive behavior in childhood ultimately compromises the development of the central nervous system itself. The altered neurobiology may help explain some of the developmental delays and failures seen in some maltreated children. Such developmental disruptions may include lowered intellectual performance, impaired ability to learn from experience, behavioral regressions under stress, and characterological abnormalities. This neurobiologic hypothesis has implications for research, intervention and training of professionals.It encourages 1) the identification of those deficit capacities most vulnerable to becoming neurologically based, 2) identification of ways to help the maltreated child explore and be accessible to developmental experiences, 3) more emphasis on the development of cognitive capacities, and 4) more breadth of training for professionals who work with maltreated children and their families.

Annuario dello Istituto di storia del diritto romano.

Vol. 18 has cover title only.

5-ton, 6x6, M809 series trucks (diesel) : truck, chassis, M809, M809A1, M810 ... truck, stake, bridge transporting, M821.

"January 1981."

Toward Never-Ending Object Learning for Robots

Thesis (Ph.D.)--University of Washington, 2016-06

Role of polarisation in automatic target recognition using resonance descriptions

The role of polarisation in late time complex resonance based target identification is investigated numerically for the case of an L-shaped wire. While repeated extraction of the resonances for varying polarisation allows for better signal-to-noise immunity, it is also found that there are preferred polarisations for each complex resonance. The first few of these polarisations are extracted for the sample target.

The vacuous concept of dignity

Rights talk dominates contemporary moral discourse. It is also having a growing impact on the development of legal principle and doctrine. One of the best known general arguments in support of rights-based moral theories is the one given by John Rawls, who claims that only rights-based theories take seriously the distinction between human beings; only they can be counted on to protect certain rights and interests that are so paramount that they are beyond the demands of net happiness (Rawls 1971). Charges and assertions of this nature have been extremely influential. After the Second World War, there was an immense increase in rights talk, both in the sheer volume of that talk and in the number of supposed rights being claimed. Rights doctrine has progressed a long way since its original modest aim of providing “a legitimization of … claims against tyrannical or exploiting regimes” (Benn 1978: 61). As Tom Campbell points out: The human rights movement is based on the need for a counter-ideology to combat the abuses and misuses of political authority by those who invoke, as a justification for their activities, the need to subordinate the particular interests of individuals to the general good (Campbell 1996: 13).

Vibration analysis of a printed circuit board

The reliability of the printed circuit board assembly under dynamic environments, such as those found onboard airplanes, ships and land vehicles is receiving more attention. This research analyses the dynamic characteristics of the printed circuit board (PCB) supported by edge retainers and plug-in connectors. By modelling the wedge retainer and connector as providing simply supported boundary condition with appropriate rotational spring stiffnesses along their respective edges with the aid of finite element codes, accurate natural frequencies for the board against experimental natural frequencies are obtained. For a PCB supported by two opposite wedge retainers and a plug-in connector and with its remaining edge free of any restraint, it is found that these real supports behave somewhere between the simply supported and clamped boundary conditions and provide a percentage fixity of 39.5% more than the classical simply supported case. By using an eigensensitivity method, the rotational stiffnesses representing the boundary supports of the PCB can be updated effectively and is capable of representing the dynamics of the PCB accurately. The result shows that the percentage error in the fundamental frequency of the PCB finite element model is substantially reduced from 22.3% to 1.3%. The procedure demonstrated the effectiveness of using only the vibration test frequencies as reference data when the mode shapes of the original untuned model are almost identical to the referenced modes/experimental data. When using only modal frequencies in model improvement, the analysis is very much simplified. Furthermore, the time taken to obtain the experimental data will be substantially reduced as the experimental mode shapes are not required.In addition, this thesis advocates a relatively simple method in determining the support locations for maximising the fundamental frequency of vibrating structures. The technique is simple and does not require any optimisation or sequential search algorithm in the analysis. The key to the procedure is to position the necessary supports at positions so as to eliminate the lower modes from the original configuration. This is accomplished by introducing point supports along the nodal lines of the highest possible mode from the original configuration, so that all the other lower modes are eliminated by the introduction of the new or extra supports to the structure. It also proposes inspecting the average driving point residues along the nodal lines of vibrating plates to find the optimal locations of the supports. Numerical examples are provided to demonstrate its validity. By applying to the PCB supported on its three sides by two wedge retainers and a connector, it is found that a single point constraint that would yield maximum fundamental frequency is located at the mid-point of the nodal line, namely, node 39. This point support has the effect of increasing the structure's fundamental frequency from 68.4 Hz to 146.9 Hz, or 115% higher.

What does "good" look like? A three-country examination of marketing practice

Grounded in configuration theory, this study investigates the notion of co-alignment of business orientation, marketing assets and marketing capabilities, and their relationships to performance. Using these criteria, profiles of high performing businesses were derived and assessed against a three country sample of Brazil, China and the UK. Findings are consistent, statistically significant and invariant across the sample. They show that businesses with ideal profiles significantly outperform competitors in terms of market-based performance, customer satisfaction, and financial performance. Furthermore, profiles of top performing organizations are similar across countries with respect to their orientations, assets, and capabilities. Only customer-based assets, network capabilities, and customer and shareholder orientations were different. Implications and future research directions are subsequently addressed.

Automatic labelling of topic models learned from Twitter by summarisation

Latent topics derived by topic models such as Latent Dirichlet Allocation (LDA) are the result of hidden thematic structures which provide further insights into the data. The automatic labelling of such topics derived from social media poses however new challenges since topics may characterise novel events happening in the real world. Existing automatic topic labelling approaches which depend on external knowledge sources become less applicable here since relevant articles/concepts of the extracted topics may not exist in external sources. In this paper we propose to address the problem of automatic labelling of latent topics learned from Twitter as a summarisation problem. We introduce a framework which apply summarisation algorithms to generate topic labels. These algorithms are independent of external sources and only rely on the identification of dominant terms in documents related to the latent topic. We compare the efficiency of existing state of the art summarisation algorithms. Our results suggest that summarisation algorithms generate better topic labels which capture event-related context compared to the top-n terms returned by LDA. © 2014 Association for Computational Linguistics.

WiFi and LTE Coexistence in the Unlicensed Spectrum

Today, smart-phones have revolutionized wireless communication industry towards an era of mobile data. To cater for the ever increasing data traffic demand, it is of utmost importance to have more spectrum resources whereby sharing under-utilized spectrum bands is an effective solution. In particular, the 4G broadband Long Term Evolution (LTE) technology and its foreseen 5G successor will benefit immensely if their operation can be extended to the under-utilized unlicensed spectrum. In this thesis, first we analyze WiFi 802.11n and LTE coexistence performance in the unlicensed spectrum considering multi-layer cell layouts through system level simulations. We consider a time division duplexing (TDD)-LTE system with an FTP traffic model for performance evaluation. Simulation results show that WiFi performance is more vulnerable to LTE interference, while LTE performance is degraded only slightly. Based on the initial findings, we propose a Q-Learning based dynamic duty cycle selection technique for configuring LTE transmission gaps, so that a satisfactory throughput is maintained both for LTE and WiFi systems. Simulation results show that the proposed approach can enhance the overall capacity performance by 19% and WiFi capacity performance by 77%, hence enabling effective coexistence of LTE and WiFi systems in the unlicensed band.

Tissue Equivalent Phantom Design for Optimization of a Coherent Scatter Imaging System

Scatter in medical imaging is typically cast off as image-related noise that detracts from meaningful diagnosis. It is therefore typically rejected or removed from medical images. However, it has been found that every material, including cancerous tissue, has a unique X-ray coherent scatter signature that can be used to identify the material or tissue. Such scatter-based tissue-identification provides the advantage of locating and identifying particular materials over conventional anatomical imaging through X-ray radiography. A coded aperture X-ray coherent scatter spectral imaging system has been developed in our group to classify different tissue types based on their unique scatter signatures. Previous experiments using our prototype have demonstrated that the depth-resolved coherent scatter spectral imaging system (CACSSI) can discriminate healthy and cancerous tissue present in the path of a non-destructive x-ray beam. A key to the successful optimization of CACSSI as a clinical imaging method is to obtain anatomically accurate phantoms of the human body. This thesis describes the development and fabrication of 3D printed anatomical scatter phantoms of the breast and lung.

The purpose of this work is to accurately model different breast geometries using a tissue equivalent phantom, and to classify these tissues in a coherent x-ray scatter imaging system. Tissue-equivalent anatomical phantoms were designed to assess the capability of the CACSSI system to classify different types of breast tissue (adipose, fibroglandular, malignant). These phantoms were 3D printed based on DICOM data obtained from CT scans of prone breasts. The phantoms were tested through comparison of measured scatter signatures with those of adipose and fibroglandular tissue from literature. Tumors in the phantom were modeled using a variety of biological tissue including actual surgically excised benign and malignant tissue specimens. Lung based phantoms have also been printed for future testing. Our imaging system has been able to define the location and composition of the various materials in the phantom. These phantoms were used to characterize the CACSSI system in terms of beam width and imaging technique. The result of this work showed accurate modeling and characterization of the phantoms through comparison of the tissue-equivalent form factors to those from literature. The physical construction of the phantoms, based on actual patient anatomy, was validated using mammography and computed tomography to visually compare the clinical images to those of actual patient anatomy.