Uso do modelo de simulação 'ABC 6' para avaliação de áreas sujeitas à ocorrência de ondas de cheia e corridas de massa/detritos: estudo de caso na bacia do Ribeirão da Prata (SP)

Pipelines are linear engineering works, designed mostly for transporting oil and its derivatives for long distances, furnishing even the farthermost zones of the country. Due to oil sector needs to ensure for the safety and conservation of its properties, several geotechnical studies are being held at the pipelines field, in order to preserve this important transportation, and also to prevent accidents, which might seriously compromise the environment and the population who lives around it. The OSBRA pipeline, who connects the city of Paulínia to the capital Brasília, is one of these engineering works that deserves to be pointed out. This research, performed at the Ribeirão da Prata Basin, was a pilot study conducted with the main objective of testing the current methodology efficiency, for future applications in the closest watersheds to the OSBRA pipeline. The objective of this research is to analyze flood wave and debris flow processes in a non-fictional watershed, by comparing two different kinds of methods: the first one based on simulation models (software ‘ABC 6’), and the other one by flood wave and debris flow susceptibility mapping. The results from the hydrological modeling were both hydrographs and ietographs that estimated values of outputs and infiltration. To construct the susceptibility maps were necessary three other maps: ground use and occupation maps, divided according to the different protection degrees that were offered to the ground; maps of dam locations in the area and physiographic compartimentation maps, divided according to the local geology. To complete the methodology, the results were collected from both methods for comparison. The obtained product for this methodology was series of data whose different susceptibility degrees to flood wave and debris flow could define the safest route for a pipeline crossing in this watershed...

Elaboração de mapa de susceptibilidade de corridas de massa/detritos e ondas de cheia, aplicado a empreendimentos dutoviários, na bacia hidrográfica do Ribeirão da Prata (SP)

Given the intense expansion of the industries in Brazil and the discovery of hydrocarbons in the pre-salt layer of the Santos and Campos Basin, there is a need to expand the distribution of oil and gas network in the country. The present work aims to present the development of susceptibility map by two distinct methods of two events (debris flows and full wave), applied to the establishment of pipelines on Ribeirão da Prata Basin. The research area covers two municipalities: São João da Boa Vista and Águas da Prata, in total 145 km2. In the paper was used the methodology proposed by Zaine (2011) for the physiographic subdivision method, which uses geological maps, geomorphological maps, digital terrain models and aerial photographs, used to extract the main elements of the physical environment, as rivers, lines, ridges, tops forms and valley forms and historical processes. Thus, the basin was divided into 11 physiographic zones, considering the following elements: thickness of soil, rock type, geomorphology, amplitude, ridges orientation, erosion occurences and mass movements. Were subsequently performed location maps of dams, that had as main purpose to localize major dams in the study area along with their area and perimeter of the reservoir, and land use map that subdivided the area in woody vegetation, permanent culture, temporary culture and urban area. Along with the preparation of the auxiliar maps was conducted a field campaign with three days and approximately 2 points per km2, which aimed to better understand the physical environment and check the main peculiarities of the study area. Criteria have been established for susceptibility maps physiographic subdivision and land use, and a survey of criteria weights used in each map for both processes under study. For the preparation of susceptibility maps were adopted two different methods, which treat the weighted average and the multiplicand. The weighted average method it is...

Avaliação da aplicação de ondas de ultra-som sobre cimentos de ionômero de vidro: rugosidade superficial e dureza

The application of ultrasonic waves during the initial setting of the glass ionomer cements (GIC) has demonstrated increase of the cure speed, reduction of air bubbles and improves in some mechanical properties. The aim of this study was to evaluate the effect of the ultrasound on the microhardness and the superficial roughness in two GICs (FUJI IX GP (GC Corporation) and Ketac Molar EasyMix (3M ESPE)). Forty specimens were confectioned, twenty for evaluation of the superficial roughness and twenty for evaluation of the microhardness. Half of them received for thirty seconds the ultrasonic waves application. The readings of the roughness had been carried before and after the toothbrushing test. The twenty remaining specimens had been polished with abrasive sandpapers of decreasing granulations and submitted to the hardness test. The results, analyzed for the variance analysis (ANOVA) (p<0,05), had demonstrated increase of the hardness for all the groups with the application of ultrasonic waves, being bigger for the Ketac Molar EasyMix. The ultrasound application also caused significant reduction of the superficial roughness for the Ketac Molar EasyMix. After the toothbrushing test, this last property increased for all the materials. It could be concluded that the application of ultrasonic waves was effective in increasing the superficial hardness of the materials and that it improved the roughness of the Ketac Molar EasyMix before the toothbrushing test.

Resistência à tração diametral de cimentos de ionômero de vidro submetidos à aplicação de ondas de ultrassom

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Nas ondas do oceano: o patrimônio histórico documental das câmaras do Brasil-Colônia no acervo do Conselho Ultramarino

Pós-graduação em História - FCHS

Das ondas do rádio ao papel dos jornais: desenvolvimento da radiodifusão e autonomia política da imprensa no Brasil, 1931-1937

Pós-graduação em História - FCLAS

Inspeção de materiais compósitos utilizando ondas acústicas guiadas

Pós-graduação em Engenharia Elétrica - FEIS

Detecção de danos em estruturas guiadas usando ondas de alta frequência

Pós-graduação em Engenharia Mecânica - FEIS

Tratamento térmico de filmes supercondutores do sistema BSCCO utilizando forno de micro-ondas doméstico

Pós-graduação em Ciência dos Materiais - FEIS

Impacto da energia de micro-ondas na sinterização da zircônia odontológica

Pós-graduação em Odontologia Restauradora - ICT

Avaliação térmica e estrutural do bagaço de cana de açúcar pré-tratado com ozônio, ultrassom e micro-ondas para produção de etanol celulósico por hidrólise enzimática

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Estudo de propriedades da resina acrílica termoativada por energia de micro-ondas frente às variações nos procedimentos de inclusão

On heat cured acrylic resins by microwaves energy the action of electromagnetic waves on methylmethacrylate promote the polymerization process. However, part of this energy is absorbed by the gypsum present in the flask and the function of this gypsum is to maintain the characteristics of specimen, nevertheless is unknown in the literature as the amount of water present in this gypsum affects the characteristics of acrylic resin. The proposal of this study was verified if dried gypsum influenced in some properties of the acrylic resins thermally activated by microwaves: presence of porosity, microhardness, roughness, flexural strength and dimensional change. Two different types of acrylic resin for complete denture were utilized: Lucitone 550 e Vipi-Wave and groups were formed: Lucitone 550, polymerization by microwave energy without gypsum treatment; Lucitone 550, polymerization by microwave energy with pretreatment gypsum; Vipi-Wave by microwave energy without gypsum treatment; Vipi Wave, polymerization by microwave energy with pretreatment gypsum; Lucitone 550 control group polymerization in hot water bath. For both situations were performed analysis of microhardness and porosity three different metallic shaped specimens were formed with followed dimensions: 2,0x2,0x2,0cm (8cm3); 2,0x2,0x1,0 (4cm3) e 2,0x2,0x0,5 (2cm3). Standardized wax specimens was used to prepare groups (n=9) and included in glass fiber flasks. The gypsum dry was made by microwave oven cycle (10min and 600W) and then the flasks were maintained in dry oven during two hours. Polymerizations of specimens were made and then polished. Wax patterns #7 obtained from the metal were embedded in plastic flask and following the processes of pressing and polymerization of the resin according to established groups. To evaluate the flexural strength, specimens 65mm x 10mm x 3.0mm from metallic patterns in bar format were made. ...

Análise da amplitude da resposta das emissões otoacústicas e das latências das ondas do PEATE, como possíveis indicadores de comprometimento das células ciliadas cocleares e nervo auditivo, em lactentes com asfixia

Pós-graduação em Bases Gerais da Cirurgia - FMB