Influencia de variables de formulación en la viscosidad de emulsiones de surfactante aniónico-aceite-agua

Phase transition and viscosity behavior of emulsified systems were studied after modifying their physicochemical formulation. Effects of concentration and nature of salts and n-alcohols, and water/oil relation on the rheological properties of emulsions were also studied. Pre-equilibrated systems were emulsified according to an agitation procedure, and the viscosity (cP) was measured at different shear rates ranging from 1 to 300 s-1. The phase behavior, as well as the emulsion type based on electrolytic conductivity, was observed. Several interpretations of the flow and viscosity curves of emulsions were made through the estimation of rheological parameters such as consistency index "k" and behavior index "n".

FRUIT MORPHOLOGY AND PRODUCTIVITY OF BABASSU PALMS IN NORTHERN MINAS GERAIS STATE, BRAZIL1

ABSTRACT The objectives of this study were to morphologically characterize fruits of the babassu palm tree (Attalea vitrivir) and to estimate their productivity in the north of Minas Gerais State, Brazil. Twenty mature fruits were collected from 10 plants in three different areas in Januária, Minas Gerais. Eighteen biometric parameters of the fruits were measured, the oil contents of the seeds was determined, the adherence to normal distribution was evaluated, distribution frequencies were evaluated and the effects of individuals and areas on the variables and the correlations between them were analyzed. The production of fruit bunches per plant and the number of fruits per bunch from 10 plants were quantified in three areas and the potential production under both natural harvesting and cultivation conditions were estimated. Significant differences were found among all of the biometric parameters examined between the different individuals and the different areas, which shows wide morphological variability in the fruits. The average oil content was 45.7%, but with significant differences among individuals. The observed variability favors the selection of productive individuals in genetic improvement programs. The potential productivity of endocarps and oil based on a density of 400/plants per hectare would be respectively 6.4 and 1.2 tons/ha, which indicates the possibility of using A. vitrivir for producing charcoal, bio fuels, and for carbon fixation.

Reducing contact resistance in graphene devices

In this thesis, the contact resistance of graphene devices was investigated because high contact resistance is detrimental to the performance of graphene field-effect transistors (GFET). Method for increasing so-called edge-contact area was applied in device fabrication process, as few nanometers thick Ni layer was used as a catalytic etchant during the annealing process. Finally, Ni was also used as a metal for contact. GFETs were fabricated using electron beam lithography using graphene fabricated by chemical vapor deposition (CVD). Critical part of the fabrication process was to preserve the high quality of the graphene channel while etching the graphene at contact areas with Ni during the annealing. This was achieved by optimizing the combination of temperature and gas flows. The structural properties of graphene were studied using scanning electron microscopy, scanning confocal μ-Raman spectroscopy and optical microscopy. Evaluation of electric transport properties including contact resistance was carried out by transmission line method and four-probe method. The lowest contact resistance found was about at 350 Ωμm. In addition, different methods to transfer CVD graphene synthesized on copper were studied. Typical method using PMMA as a supporting layer leaves some residues after its removal, thus effecting on the performance of a graphene devices. In a metal assisted transfer method, metal is used as an interfacial layer between PMMA and graphene. This allows more effective removal of PMMA. However, Raman spectra of graphene transferred by metal assisted method showed somewhat lower quality than the PMMA assisted method

AQUAREL CONCEPT Aquatic resources for green energy realization

The AQUAREL project studied the availability and optional utilization methods for fish processing side streams and other aquatic biomaterial in the Republic of Karelia. Additionally processing aquatic biomaterial with manure and sewage sludge was studied. Based on the results, the most feasible option today is to process fish side streams to fish oil and dewatered oil-free residue and to use them for fish or animal feed production. However, it is necessary to highlight, that changes in e.g. economic environment, energy prices and demand may require re-evaluating the results and conclusions made in the project. Producing fish oil from fish processing side streams is an easy and relatively simple production process generating a valuable end product. The functionality of the process was confirmed in a pilot conducted in the project. The oil and solids are separated from the heated fish waste based on gravity. The fish oil separating on top of the separator unit is removed. Fish oil can as such be utilized for heating purposes, fish meal or animal feed production, but it can also be further processed to biodiesel. However, due to currently moderate energy prices in Russia, biodiesel production is not economically profitable. Even if the fish oil production process is not complicated, the operative management of small-scale fish oil production unit requires dedicated resources and separate facilities especially to meet hygiene requirements. Managing the side streams is not a core business for fish farmers. Efficient and economically profitable fish oil production requires a centralized production unit with bigger processing capacity. One fish processing unit needs to be designed to manage side streams collected from several fish farms. The optimum location for the processing unit is in the middle of the fish farms. Based on the transportation cost analysis in the Republic of Karelia, it is not economically efficient to transport bio-wastes for more than 100 km since the transportation costs start increasing substantially. Another issue to be considered is that collection of side streams, including the dead fish, from the fish farms should be organized on a daily basis in order to eliminate the need for storing the side streams at the farms. Based on AQUAREL project studies there are different public funding sources available for supporting and enabling profitable and environmentally sustainable utilization, research or development of fish processing side streams and other aquatic biomaterial. Different funding programmes can be utilized by companies, research organizations, authorities and non-governmental organizations.

Pulssitettu laserablaatio mikrofluidisten kanavistojen sarjatuotantomenetelmänä

Puolijohteiden yleistyttyä vuodesta 1948 alkaen, ovat elektroniset laitteet pienentyneet jatkuvasti tehojen kuitenkin kasvaessa. Kasvaneet tehotiheydet kuitenkin vaikeuttavat laitesuunnittelua, sillä puoljohdekomponenttien suorituskyvylle ja eliniälle on oleellista lämpötilojen ja lämpötilavaihteluiden minimointi. Perinteisen ilmajäähdytyksen lähestyessä rajojaan niin kokonaistehon kuin järkevän energiatehokkuudenkin suhteen, on parhaaksi seuraavaksi teknologiaksi ennustettu kaksifaasijäähdytystä, jonka suorituskyky ja energiatehokkuus ovat vaaditulla tasolla. Kaksifaasijäähdytyksen optimaaliselle toiminnalle tärkeää on hyvin suunniteltu ja tarkasti valmistettu lämmönsiirtopinta, jota kutsutaan mikrokanavistoksi. Pulssitettu laserkaiverrus on edistynyt valmistustekniikka, jonka tarkkuus ja luotettavuus sopisivat mikrokanavistojen valmistamiseen. Laserkaiverruksella saavutettavat lopputulokset vaihtelevat kuitenkin materiaalista riippuen ja kupari – jota käytetään yleisesti lämmönjohteena – on eräs huonoimmin lasertyöstöön reagoivista materiaaleista ja siksi on oleellista selvittää laser-kaiverruksen toimivuutta kuparisten mikrokanavistojen valmistuksessa. Pulssitetun laser-kaiverruksen eri variaatioista nanosekunti-luokan pulssinpituuksilla toimivat laitteet ovat jatkuvan tuotannon kannalta paras vaihtoehto niiden hyvän tuottavuuden, saatavuuden sekä kohtuullisen alkuinvestoinnin vuoksi. Käytännön kaiverruskokeiden perusteella selvisi, että menetelmä on laatunsa ja tarkkuutensa puolesta sopiva varsinaiseen tuotantoon. Kaiverruksen tehokkuus kuparia työstettäessä on kuitenkin ennakoituakin heikompi ja niin valmistus- kuin suunnitelu-prosessikin vaativat vielä jatkotutkimusta ja -kehitystä.

Surface studies of some metallic thin films by optical methods

The thesis aims to present the results of experimental investigations on the changes of optical properties of metallic thin films due to heating. The parameters which are measured are reflectivity, refractive indices and the ellipsometric quantities V and A . The materials used in the studies are metals like Silver, Aluminium and Copper. By applying the optical method the interdiffusion taking place in multilayer ‘films of Aluminium and Silver has also been studied. Special interest has been taken to reveal the mechanisms of the hillock growth and surface roughness caused by heating and their relation with the stress in the film

Enhancing the oxidative stability of rice crackers by addition of the ethanolic extract of phytochemicals from Cratoxylum formosum Dyer

Craloxylum formosum Dyer is consumed throughout the year as food and medicine in Thailand. It contains large amounts of chlorogenic acid and quinic acid derivatives. The antioxidative activity of the extract was studied in refined soybean oil coating on rice crackers without any seasoning. They were stored in accelerated oxidation conditions at 40 degrees C, 80% relative humidity (RH) in the dark for 18 days. The oxidative state of each sample was monitored by analyzing of the peroxide value (PV) and thiobarbituric acid reactive substances (TBARS) as well as by odor analysis by quantitative descriptive analysis (QDA). The C formosum extract was more effective than alpha-tocopherol due to metal ions present in the crackers, which resulted in alpha-tocopherol being less effective as an antioxidant. Sensory odor attributes of rice crackers were related more closely to TBARS than to PV values by linear regression analysis. The present study indicated that C. formosum extract was a promising source of a natural food antioxidant and was effective in inhibiting lipid oxidation in rice crackers.

Terahertz analysis of stratified wall plaster at buildings of cultural importance across Europe

Terahertz (THz) radiation is being developed as a tool for the analysis of cultural heritage, and due to recent advances in technology is now available commercially in systems which can be deployed for field analysis. The radiation is capable of penetrating up to one centimetre of wall plaster and is delivered in ultrafast pulses which are reflected from layers within this region. The technique is non-contact, non-invasive and non-destructive. While sub-surface radar is able to penetrate over a metre of wall plaster, producing details of internal structures, infrared and ultraviolet techniques produce information about the surface layers of wall plaster. THz radiation is able to provide information about the interim region of up to approximately one centimetre into the wall surface. Data from Chartres Cathedral, France, Riga Dome Cathedral, Latvia, and Chartreuse du Val de Bénédiction, France is presented each with different research questions. The presence of sub-surface paint layers was expected from documentary evidence, dating to the 13th Century, at Chartres Cathedral. In contrast, at the Riga Dome Cathedral surface painting had been obscured as recently as 1941 during the Russian occupation of Latvia using white lead-based paint. In the 13th Century, wall paintings at the Chapel of the Frescos, Chartreuse du Val de Benediction in Villeneuve les Avignon were constructed using sinopia under-painting on plaster covering uneven stonework.. This paper compares and contrasts the ability of THz radiation to provide information about sub-surface features in churches and Cathedrals across Europe by analysing depth based profiles gained from the reflected signal. © (2013) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE).

Nuclear dependence of charm production

Using data taken by SELEX during the 1996-1997 fixed target run at Fermilab, we study the production of charmed hadrons on copper and carbon targets with Sigma(-), p, pi(-), and pi(+) beams. Parametrizing the dependence of the inclusive production cross section on the atomic number A as A(alpha), we determine alpha for D(+), D(0), D(s)(+), D(+)(2010), Lambda(+)(c), and their respective anti-particles, as a function of their transverse momentum p(t) and scaled longitudinal momentum x(F). Within our statistics there is no dependence of alpha on x(F) for any charm species for the interval 0.1 < x(F) < 1.0. The average value of alpha for charm production by pion beams is alpha(meson) = 0.850 +/- 0.028. This is somewhat larger than the corresponding average alpha(baryon) = 0.755 +/- 0.016 for charm production by baryon beams (Sigma(-), p).

Ensaios em finanças públicas municipais

Esta tese busca discutir problemas relacionados às finanças públicas municipais no país. Um aprimoramento de nosso federalismo fiscal, com maior descentralização de recursos e implementação de regras de transferências federativas com maiores incentivos pró-eficiência – aumentando os incentivos pró-obtenção de melhores resultados sociais por parte das unidades subfederadas – pode se revelar instrumento importante na melhoria de nossas condições sociais. Para isto, dividiu-se esta tese em quatro partes distintas. No primeiro capítulo, discutem-se os impactos das receitas petrolíferas sobre as finanças públicas municipais. As mudanças legais ocorridas no país na década de noventa do último século - relativas ao setor petrolífero - levaram a crescente (e concentrada) transferência de recursos do setor para os estados e municípios brasileiros. A forte sensação que estes estariam sendo desperdiçados de alguma forma vem suscitando discussões sobre a necessidade de se reformular sua distribuição. As recentes descobertas de megacampos petrolíferos no pré-sal do litoral brasileiro somente intensificaram este processo. Buscou-se identificar os efeitos destas transferências sobre as variáveis fiscais municipais no país. Detectou-se que não ocorreu substituição tributária, ou seja, estes recursos não diminuíram o esforço arrecadatório dos municípios. Em compensação, tanto os recursos cuja distribuição é bem mais concentrada (referentes aos royalties excedentes) quanto aqueles mais bem-distribuídos (referentes aos royalties originais) levaram as prefeituras a aumentar seus gastos correntes (piorando sua composição do ponto de vista social) e diminuir seus investimentos. O contrário parece ocorrer com os recursos cuja distribuição se dá de forma intermediária (os royalties referentes às participações especiais). No segundo capítulo, discute-se o impacto das receitas petrolíferas sobre a proficiência dos alunos até a quarta série primária das escolas públicas municipais. As receitas petrolíferas – agregadas ou não – não se mostraram estatisticamente significativas na explicação do desempenho observado pelos alunos da quarta série primária das escolas municipais em português ou matemática. Este resultado, entretanto, deve ser olhado com cautela, uma vez que não é trivial identificar como (e o tempo necessário) estes efeitos seriam gerados. Entretanto, diferentes fontes de receitas municipais impactariam de forma diferenciada as proficiências observadas nos testes de português e matemática, explicitando a necessidade de se entender melhor estas diferenças para se desenhar mecanismo mais eficiente de repasse de recursos constitucionais aos municípios. No terceiro capítulo, estudam-se os impactos das emancipações municipais ocorridas na década de 90 sobre o bem-estar das populações locais. Devido à Constituição Federal de 1988, o número de municípios no Brasil multiplicou-se fortemente na década de 90 do último século. Mais de mil municípios foram criados em todo o país, fazendo seu número ultrapassar a casa dos 5.500. Este processo tem sido interpretado de forma bastante negativa. Baseado em evidências anedóticas, se pressupõe que os atores políticos locais o utilizaram para se apropriar de maior parcela dos recursos transferidos de outros níveis governamentais. Entretanto, nenhum esforço mais sistemático foi realizado buscando calcular, de maneira efetiva, os resultados sociais líquidos deste processo. É isto que se busca fazer aqui, utilizando dados sobre os municípios mineiros - cujo número passa de 723 em 1991 para 853 em 2000. Foram detectados impactos positivos relacionados a diversas variáveis educacionais e de saúde. Ao mesmo tempo, o contrário ocorreu com os indicadores de pobreza e indigência. Este resultado mostra que o movimento observado de emancipação municipal talvez tenha sido bastante benéfico, sinalizando para a existência de mercados políticos eficientes nestas localidades, o que indicaria a necessidade de se manter uma maior autonomia local relativa a processos de emancipação de distritos. Por fim, no quarto capítulo, analisam-se os impactos de lei (implementada em Minas Gerais) que buscou aumentar os incentivos pró-eficiência das prefeituras municipais a partir das transferências federativas. Buscando melhorar as condições de vida dos municípios mineiros, o governo estadual mineiro instituiu, em 1995, a lei 12.040, conhecida como Lei Robin Hood. Esta permitia que 25% dos recursos de ICMS a serem distribuídos aos municípios mineiros se dessem sobre resultados observáveis em diversas áreas tais como saúde, educação, conservação ecológica, entre outras. Ou seja, esta instituía, em relação a estas transferências, um contrato de alto poder com os municípios relacionados às políticas públicas implementadas. O estudo destas transferências (relativas à educação e saúde) mostrou resultados dúbios. Resultados positivos relativos à educação e à saúde parecem ocorrer em todo o estado, mas os incentivos dados poderiam ser bem maiores - faz-se necessário um refinamento das regras da partilha destas transferências. Dada a relativa escassez deste tipo de contrato em transferências federativas, seja no Brasil, seja no restante do mundo, este resultado aponta a necessidade de utilização de instrumentos de maior poder nas relações federativas, buscando incrementar as condições de vida locais.

Docagem ou afretamento de UMS: a escolha ótima para a extensão da vida útil das plataformas de petróleo de campos marítimos maduros sob o enfoque das opções reais

O objetivo deste trabalho é propor a utilização do arcabouço teórico das opções reais e a posterior aplicação do modelo binomial na avaliação de projetos relacionados à exploração e produção de petróleo, tendo em vista a flexibilidade gerencial, os riscos e as incertezas técnicas e de mercado que norteiam o setor petrolífero upstream. Ademais, a aplicação do modelo proposto capta o papel crucial da volatilidade do preço do petróleo na avaliação da decisão de investimento e revela a existência dos custos irrecuperáveis extremos decorrentes do ativo real, neste caso, a unidade marítima de petróleo. Assim, com o intuito de prolongar o ciclo de produção de unidade marítima de petróleo com características preestabelecidas, propõe-se a avaliação econômica de duas alternativas tecnológicas para a extensão de vida útil da plataforma marítima objeto de estudo, sendo estas alternativas tratadas como opções de expansão. As alternativas propostas são duas: o afretamento da UMS (Unidade de Manutenção e Segurança) acoplada à plataforma e a docagem da plataforma a partir da desmobilização, isto é, o descomissionamento, e envio da plataforma ao estaleiro. Na aplicação da primeira opção, a UMS se configura em uma embarcação equipada com toda a estrutura necessária para a realização de serviço de manutenção e revitalização, sem que ocorra interrupção da produção de petróleo. Por outro lado, a opção de descomissionamento é desprovida de receita até o retorno da plataforma do estaleiro. No que tange à metodologia do presente trabalho, o modelo binomial com probabilidades de risco neutro é aplicado considerando a receita proveniente da produção de petróleo de uma plataforma marítima com sistema de produção flutuante com 14 poços, sendo 10 produtores e 4 injetores e sustentada por 8 linhas de ancoragem. Também é definida a volatilidade do projeto como sendo a volatilidade do preço do petróleo. Por fim, as opções de expansão podem ser exercidas a qualquer momento antes da data de expiração das opções, data esta coincidente para ambas as opções e referente ao término de contrato de afretamento da UMS, que corresponde ao período de cinco anos. Neste período de cinco anos, as duas alternativas são exercidas a partir do primeiro ano, com receitas e custos distintos em virtude das especificidades decorrentes das alternativas tecnológicas propostas. A partir da aplicação do modelo binomial com probabilidades de risco neutro sob o enfoque das opções reais, as duas alternativas tecnológicas são tratadas como opções americanas na avaliação econômica da revitalização e manutenção da plataforma marítima. Também realiza-se a análise tradicional do VPL para as duas alternativas. As duas análises apontam para a escolha da UMS como alternativa ótima de expansão da vida útil da plataforma. Ademais, a análise sob o enfoque das opções reais capta um valor adicional em ambas as alternativas tecnológicas, fruto das características inerentes à indústria petrolífera. Quanto à estrutura do trabalho em questão se divide em cinco capítulos: introdução, referencial teórico, metodologia, apresentação dos resultados e as considerações finais.

Aplicação de termogravimetria acoplada à espectrometria de massas para caracterização de petróleo e determinação da curva de evolução de gás sulfídrico

With the new discoveries of oil and gas, the exploration of fields in various geological basins, imports of other oils and the development of alternative fuels, more and more research labs have evaluated and characterized new types of petroleum and derivatives. Therefore the investment in new techniques and equipment in the samples analysis to determine their physical and chemical properties, their composition, possible contaminants, especification of products, among others, have multiplied in last years, so development of techniques for rapid and efficient characterization is extremely important for a better economic recovery of oil. Based on this context, this work has two main objectives. The first one is to characterize the oil by thermogravimetry coupled with mass spectrometry (TG-MS), and correlate these results with from other types of characterizations data previously informed. The second is to use the technique to develop a methodology to obtain the curve of evaluation of hydrogen sulfide gas in oil. Thus, four samples were analyzed by TG-MS, and X-ray fluorescence spectrometry (XRF). TG results can be used to indicate the nature of oil, its tendency in coke formation, temperatures of distillation and cracking, and other features. It was observed in MS evaluations the behavior of oil main compounds with temperature, the points where the volatilized certain fractions and the evaluation gas analysis of sulfide hydrogen that is compared with the evaluation curve obtained by Petrobras with another methodology

Estudo paramétrico da recuperação de petróleo pesado por aquecimento eletromagnético resistivo

Electrical resistive heating (ERH) is a thermal method used to improve oil recovery. It can increase oil rate and oil recovery due to temperature increase caused by electrical current passage through oil zone. ERH has some advantage compared with well-known thermal methods such as continuous steam flood, presenting low-water production. This method can be applied to reservoirs with different characteristics and initial reservoir conditions. Commercial software was used to test several cases using a semi-synthetic homogeneous reservoir with some characteristics as found in northeast Brazilian basins. It was realized a sensitivity analysis of some reservoir parameters, such as: oil zone, aquifer presence, gas cap presence and oil saturation on oil recovery and energy consumption. Then it was tested several cases studying the electrical variables considered more important in the process, such as: voltage, electrical configurations and electrodes positions. Energy optimization by electrodes voltage levels changes and electrical settings modify the intensity and the electrical current distribution in oil zone and, consequently, their influences in reservoir temperature reached at some regions. Results show which reservoir parameters were significant in order to improve oil recovery and energy requirement in for each reservoir. Most significant parameters on oil recovery and electrical energy delivered were oil thickness, presence of aquifer, presence of gas cap, voltage, electrical configuration and electrodes positions. Factors such as: connate water, water salinity and relative permeability to water at irreducible oil saturation had low influence on oil recovery but had some influence in energy requirements. It was possible to optimize energy consumption and oil recovery by electrical variables. Energy requirements can decrease by changing electrodes voltages during the process. This application can be extended to heavy oil reservoirs of high depth, such as offshore fields, where nowadays it is not applicable any conventional thermal process such as steam flooding

Extração de boro de água produzida sintética por sistema microemulsionado

Boron is a semi-metal present in certain types of soils and natural waters. It is essential to the healthy development of plants and non-toxic to humans, depending on its concentration. It is used in various industries and it s present in water production coming from oil production. More specifically in Rio Grande do Norte, one of the largest oil producers on shore of Brazil, the relationship water/oil in some fields becomes more than 90%. The most common destination of this produced water is disposal in open sea after processing to meet the legal specification. In this context, this research proposes to study the extraction of boron in water produced by microemulsion systems for industrial utilization. It was taken into account the efficiency of extraction of boron related to surfactant (DDA and OCS, both characterized by FT-IR), cosurfactant (butanol and isoamyl alcohol), organic phase (kerosene and heptanes) and aqueous phase (solution of boron 3.6 ppm in alkaline pH). The ratio cosurfactant/ surfactant used was four and the percentage of organic phases for all points of study was set at 5%. It was chosen points with the highest percentage of aqueous phase. Each system was designed for three points of different compositions in relation to the constituents of a pseudoternary diagram. These points were chosen according to studies of phase behavior in pseudoternary diagrams made in previous studies. For this research, points were chosen in the Winsor II region. The excess aqueous solution obtained in these systems was separated and analyzed by ICP OES. For the data set obtained, the better efficiency in the extraction of boron was obtained using the system with DAC, isoamyl alcohol and heptanes, which extracted 49% in a single step. OCS was not viable to the extraction of boron by microemulsion system in the conditions defined in this study

Respostas hematológicas em tuvira após anestesia com diferentes concentrações de óleo de cravo

The hematological responses in tuvira (Gymnotus aff. inaequilabiatus) after clove oil anesthesia at different concentrations were evaluated in this study. Fish (n = 25) with average length of 26.8 +/- 2.4 cm and weighing 94.4 +/- 23.6 g were separated in five groups composed with five animals each and submitted individually to respective concentrations of clove oil: 40, 80, 120, 160 and 200 mg L-1. After anesthetic recuperation, the blood samples collection were performed, as well as complete hemogram. The results were submitted to analysis of variance, Tukey test (P<0.05) and Sperman's correlation analysis. There was an increase (P<0.05) on hematocrit, red blood cells count, thrombocytes count and in the values of neutrophils with increasing of clove oil concentrations. In addition, positive correlation (P<0.05) were observed on total leukocytes, as well as negative linear correlation (P<0.05) for mean corpuscular hemoglobin concentration (MCHC). The clove oil anesthesia on tuvira cause hematological changes with an effect dose-dependent. These changes should be considered mainly in future studies designed to establish the reference values of hematologic variables for this specie.