Chemical composition and enzymatic digestibility of sugarcane clones selected for varied lignin content

Abstract Background The recalcitrance of lignocellulosic materials is a major limitation for their conversion into fermentable sugars. Lignin depletion in new cultivars or transgenic plants has been identified as a way to diminish this recalcitrance. In this study, we assessed the success of a sugarcane breeding program in selecting sugarcane plants with low lignin content, and report the chemical composition and agronomic characteristics of eleven experimental hybrids and two reference samples. The enzymatic digestion of untreated and chemically delignified samples was evaluated to advance the performance of the sugarcane residue (bagasse) in cellulosic-ethanol production processes. Results The ranges for the percentages of glucan, hemicellulose, lignin, and extractive (based on oven-dry biomass) of the experimental hybrids and reference samples were 38% to 43%, 25% to 32%, 17% to 24%, and 1.6% to 7.5%, respectively. The samples with the smallest amounts of lignin did not produce the largest amounts of total polysaccharides. Instead, a variable increase in the mass of a number of components, including extractives, seemed to compensate for the reduction in lignin content. Hydroxycinnamic acids accounted for a significant part of the aromatic compounds in the samples, with p-coumaric acid predominating, whereas ferulic acid was present only in low amounts. Hydroxycinnamic acids with ester linkage to the hemicelluloses varied from 2.3% to 3.6%. The percentage of total hydroxycinnamic acids (including the fraction linked to lignin through ether linkages) varied from 5.0% to 9.2%, and correlated to some extent with the lignin content. These clones released up to 31% of glucose after 72 hours of digestion with commercial cellulases, whereas chemically delignified samples led to cellulose conversion values of more than 80%. However, plants with lower lignin content required less delignification to reach higher efficiencies of cellulose conversion during the enzymatic treatment. Conclusion Some of the experimental sugarcane hybrids did have the combined characteristics of high biomass and high sucrose production with low lignin content. Conversion of glucan to glucose by commercial cellulases was increased in the samples with low lignin content. Chemical delignification further increased the cellulose conversion to values of more than 80%. Thus, plants with lower lignin content required less delignification to reach higher efficiencies of cellulose conversion during the enzymatic treatment.

Effects of pretreatment on morphology, chemical composition and enzymatic digestibility of eucalyptus bark: a potentially valuable source of fermentable sugars for biofuel production – part 1

Abstract Background In recent years, the growing demand for biofuels has encouraged the search for different sources of underutilized lignocellulosic feedstocks that are available in sufficient abundance to be used for sustainable biofuel production. Much attention has been focused on biomass from grass. However, large amounts of timber residues such as eucalyptus bark are available and represent a potential source for conversion to bioethanol. In the present paper, we investigate the effects of a delignification process with increasing sodium hydroxide concentrations, preceded or not by diluted acid, on the bark of two eucalyptus clones: Eucalyptus grandis (EG) and the hybrid, E. grandis x urophylla (HGU). The enzymatic digestibility and total cellulose conversion were measured, along with the effect on the composition of the solid and the liquor fractions. Barks were also assessed using Fourier-transform infrared spectroscopy (FTIR), solid-state nuclear magnetic resonance (NMR), X-Ray diffraction, and scanning electron microscopy (SEM). Results Compositional analysis revealed an increase in the cellulose content, reaching around 81% and 76% of glucose for HGU and EG, respectively, using a two-step treatment with HCl 1%, followed by 4% NaOH. Lignin removal was 84% (HGU) and 79% (EG), while the hemicellulose removal was 95% and 97% for HGU and EG, respectively. However, when we applied a one-step treatment, with 4% NaOH, higher hydrolysis efficiencies were found after 48 h for both clones, reaching almost 100% for HGU and 80% for EG, in spite of the lower lignin and hemicellulose removal. Total cellulose conversion increased from 5% and 7% to around 65% for HGU and 59% for EG. NMR and FTIR provided important insight into the lignin and hemicellulose removal and SEM studies shed light on the cell-wall unstructuring after pretreatment and lignin migration and precipitation on the fibers surface, which explain the different hydrolysis rates found for the clones. Conclusion Our results show that the single step alkaline pretreatment improves the enzymatic digestibility of Eucalyptus bark. Furthermore, the chemical and physical methods combined in this study provide a better comprehension of the pretreatment effects on cell-wall and the factors that influence enzymatic digestibility of this forest residue.

Antioxidant activity and chemical composition of the non polar fraction of Gracilaria domingensis (Kützing) Sonder ex Dickie and Gracilaria birdiae (Plastino & Oliveira)

Gracilaria domingensis (Kützing) Sonder ex Dickie and Gracilaria birdiae (Plastino & Oliveira) (Gracilariales, Rhodophyta) are seaweeds that occur on the Brazilian coast. Based on their economic and pharmaceutical importance, we investigated the antioxidant activity of the methanolic, ethyl acetate and hexane extracts of both species. The hexane extracts display a high antioxidant activity and comparative analyses indicated G. birdiae as the most active species. Chemical investigation of these fractions showed several carotenoids and fatty acids, as well as cholesterol and sitosterol derivatives. HPLC-DAD analysis of G. birdiae showed violaxanthin (0.04 μg.mg-1 of dry material), antheraxanthin (5.31 μg.mg-1), aloxanthin (0.09 μg.mg-1), zeaxanthin (0.45 μg.mg-1) and β-carotene (0.37 μg.mg-1) as the major carotenoids. G. domingensis showed a similar carotenoid profile, however, with much lower concentration than G. birdiae. Gas chromatography coupled to mass spectrometry was used to determine other nonpolar compounds of these seaweeds. The main compounds detected in both studied species were the fatty acids 16:0; 18:1 Δ9; 20:3 Δ6,9,12, 20:4 Δ5,8,11,14. We found no specificity of compounds in either species. However, G. birdiae, presented higher contents of carotenoids and arachidonic acid than G. domingensis.

Effects of chemical composition on the corrosion of dental alloys

The aim of this study was to determine the effect of the oral environment on the corrosion of dental alloys with different compositions, using electrochemical methods. The corrosion rates were obtained from the current-potential curves and electrochemical impedance spectroscopy (EIS). The effect of artificial saliva on the corrosion of dental alloys was dependent on alloy composition. Dissolution of the ions occurred in all tested dental alloys and the results were strongly dependent on the general alloy composition. Regarding the alloys containing nickel, the Ni-Cr and Ni-Cr-Ti alloys released 0.62 mg/L of Ni on average, while the Co-Cr dental alloy released ions between 0.01 and 0.03 mg/L of Co and Cr, respectively.The open-circuit potential stabilized at a higher level with lower deviation (standard deviation: Ni-Cr-6Ti = 32 mV/SCE and Co-Cr = 54 mV/SCE). The potenciodynamic curves of the dental alloys showed that the Ni-based dental alloy with >70 wt% of Ni had a similar curve and the Co-Cr dental alloy showed a low current density and hence a high resistance to corrosion compared with the Ni-based dental alloys. Some changes in microstructure were observed and this fact influenced the corrosion behavior for the alloys. The lower corrosion resistance also led to greater release of nickel ions to the medium. The quantity of Co ions released from the Co-Cr-Mo alloy was relatively small in the solutions. In addition, the quantity of Cr ions released into the artificial saliva from the Co-Cr alloy was lower than Cr release from the Ni-based dental alloys.

Effects of microbial inoculants and amino acid production by-product on fermentation and chemical composition of sugarcane silages

The objective of this study was to evaluate the chemical composition, fermentation patterns and aerobic stability of sugarcane silages with addition of amino acid production (monosodium glutamate) by-product (APB) and microbial inoculants. Mature sugarcane was chopped and ensiled in laboratory silos (n = 4/treatment) without additives (control) and with APB (10 g/kg), Pioneer 1174® (PIO, 1.0 mg/kg, Lactobacillus plantarum + Streptoccoccus faecium, Pioneer), Lalsil Cana (2.0 mg/kg, Lactobacillus buchineri, Lallemand) or Mercosil Maís 11C33® (1.0 mg/kg, Lactobacillus buchineri + Lactobacillus plantarum + Streptoccoccus faecium, Timac Agro). Fresh silage and silage liquor samples were obtained to assess pH, chemical composition and organic acid concentrations. Silage temperature was recorded throughout seven days to evaluate aerobic stability. The addition of APB decreased lactic acid levels, increased pH and N-NH3 and did not alter ethanol, acetic and butyric acids concentrations or dry matter (DM) losses. Microbial inoculants enhanced acetic acid levels, although only Pioneer 1174® and Mercosil Maís 11C33® lowered ethanol, butyric acid and DM losses. The addition of APB increased CP content and did not modify DM, soluble carbohydrates contents or in vitro dry matter digestibility. Additives did not alter silage maximum temperature or temperature increasing rate; however, Pioneer 1174® and Mercosil Maís 11C33® increased the time elapsed to reach maximum temperature. Monosodium glutamate production by-product does not alter fermentation patterns or aerobic stability of sugarcane silages, whereas homofermentative bacteria can provide silages of good quality.

Chemical composition measurements of cloud condensation nuclei and ice nuclei by aerosol mass spectrometry

In this study the Aerodyne Aerosol Mass Spectrometer (AMS) was used during three laboratory measurement campaigns, FROST1, FROST2 and ACI-03. The FROST campaigns took place at the Leipzig Aerosol Cloud Interaction Simulator (LACIS) at the IfT in Leipzig and the ACI-03 campaign was conducted at the AIDA facility at the Karlsruhe Institute of Technology (KIT). In all three campaigns, the effect of coatings on mineral dust ice nuclei (IN) was investigated. During the FROST campaigns, Arizona Test Dust (ATD) particles of 200, 300 and 400 nm diameter were coated with thin coatings (< 7 nm) of sulphuric acid. At these very thin coatings, the AMS was operated close to its detection limits. Up to now it was not possible to accurately determine AMS detection limits during regular measurements. Therefore, the mathematical tools to analyse the detection limits of the AMS have been improved in this work. It is now possible to calculate detection limits of the AMS under operating conditions, without losing precious time by sampling through a particle filter. The instrument was characterised in more detail to enable correct quantification of the sulphate loadings on the ATD particle surfaces. Correction factors for the instrument inlet transmission, the collection efficiency, and the relative ionisation efficiency have been determined. With these corrections it was possible to quantify the sulphate mass per particle on the ATD after the condensation of sulphuric acid on its surface. The AMS results have been combined with the ice nucleus counter results. This revealed that the IN-efficiency of ATD is reduced when it is coated with sulphuric acid. The reason for this reduction is a chemical reaction of sulphuric acid with the particle's surface. These reactions are increasingly taking place when the aerosol is humidified or heated after the coating with sulphuric acid. A detailed analysis of the solubility and the evaporation temperature of the surface reaction products revealed that most likely aluminium sulphate is produced in these reactions.

Understanding of stuck fermentations : investigations on the relationship between the microbial diversity and chemical composition of must

Das Ziel dieser Arbeit war es, mehr Informationen über unkonventionelle Gründe für Gärstockungen zu gewinnen und neue Wege zu finden, diese zu überwinden. Mikrobielle Sukzession und die chemische Zusammensetzung bei der Gärung wurden in zwei aufeinander folgenden Jahren in einem Weingut von der oberen Mosel in Deutschland studiert. Es gab keinen Hinweis darauf, dass die isolierten Bakterienspezies oder chemischen Komponenten von Most und Jungwein an schleppenden oder stockenden Gärungen beteiligt waren. Ferner konnte während dieser Arbeit gezeigt werden, dass Saccharomyces bayanus die dominierende Weinhefe in diesem Weingut war statt der klassischen und bekannten Weinhefe Saccharomyces cerevisiae. Während der Gärstockung konnte ein Dreifach-Hybrid Saccharomyces cerevisiae x Saccharomyces kudriavzevii x Saccharomyces bayanus wachsen, Saccharomyces bayanus ersetzen und die Gärung beenden. Beide isolierten Hefestämme Saccharomyces bayanus Stamm HL 77 und der Dreifach-Hybrid Saccharomyces cerevisiae x Saccharomyces kudriavzevii x Saccharomyces bayanus Stamm HL 78 konnten Glucose und Fructose von Anfang an verwerten und konnten bei niedrigen Temperaturen von 15 °C und in der Abwesenheit von Hefe-verwertbarem Stickstoff in Form von Ammonium wachsen, solange Aminosäuren im Medium vorhanden waren, im Gegensatz zu einer kommerziellen Saccharomyces cerevisiae-Starterkultur. Chemische Untersuchungen ergaben, dass Hefe-verwertbarer Stickstoff in dem kooperierenden Weingut mit einem Maximum von 160 mg/l zu Beginn der Gärung vorhanden war und auf 40 mg/L verringert war nach zwei Wochen. Aus diesem Grund sind beide isolierten Hefestämme interessant als Starterkulturen in diesem Weingut und dies kann neben der niedrigen Temperatur im Keller auch ein Grund sein, warum Saccharomyces cerevisiae nicht die dominierende Weinhefe in diesem Fall ist. Der Dreifach-Hybrid Saccharomyces cerevisiae x Saccharomyces kudriavzevii x Saccharomyces bayanus Stamm HL 78 ist in der Lage, Fructose noch effizienter zu nutzen als Saccharomyces bayanus Stamm HL 77 und ist weniger abhängig von der Aminosäurekonzentration. Dieser Stamm wurde bereits erfolgreich bei diesem Projekt eingesetzt, um eine Gärstockung in dem kooperierenden Weingut zu beheben. Es ist bekannt, dass Saccharomyces-Hybride in der Weinherstellung vorkommen aber ihre Rolle bei der Überwindung von Gärstockungen wurde bisher noch nicht beschrieben. Diese Ergebnisse sind nützlich, um Gärstockungen zu vermeiden oder zu überwinden mit der selektiven Verwendung dieser Hefestämme in verschiedenen Stadien der Gärung. Das kooperierende Weingut, welches im oberen Qualitätssegment platziert ist, hatte jedes Jahr Probleme mit Gärstockungen. Daher ist die Anwendung der Dreifach-Hybriden Saccharomyces cerevisiae x Saccharomyces kudriavzevii x Saccharomyces bayanus Stamm HL 78 eine große Chance, Gärstockungen und finanzielle Verluste ohne kommerzielle Starterkulturen oder andere übliche Praktiken, die zu einer Veränderung des Aromaprofils führen können, zu vermeiden. Die beschriebenen Untersuchungen stellen ein Modell dar, um Gärstockungen auch in anderen Weingütern, die Spontangärungen anwenden, zu überwinden.

Chemical composition modification of casting aluminium alloys for engine applications

The research activities were focused on evaluating the effect of Mo addition to mechanical properties and microstructure of A354 aluminium casting alloy. Samples, with increasing amount of Mo, were produced and heat treated. After heat treatment and exposition to high temperatures samples underwent microstructural and chemical analyses, hardness and tensile tests. The collected data led to the optimization of both casting parameters, for obtaining a homogeneous Mo distribution in the alloy, and heat treatment parameters, allowing the formation of Mo based strengthening precipitates stable at high temperature. Microstructural and chemical analyses highlighted how Mo addition in percentage superior to 0.1% wt. can modify the silicon eutectic morphology and hinder the formation of iron based β intermetallics. High temperature exposure curves, instead, showed that after long exposition hardness is slightly influenced by heat treatment while the effect of Mo addition superior to 0,3% is negligible. Tensile tests confirmed that the addition of 0.3%wt Mo induces an increase of about 10% of ultimate tensile strength after high temperature exposition (250°C for 100h) while heat treatments have slight influence on mechanical behaviour. These results could be exploited for developing innovative heat treatment sequence able to reduce residual stresses in castings produced with A354 modified with Mo.

Effects of Chemical Composition on Forage Intake of Heifers Fed Hays of Different Species

Alfalfa, smooth bromegrass, and big bluestem hays harvested at two maturities differing by four weeks were fed at mature-to-immature hay ratios of 1:0, 2:1, 1:2, and 0:1 to yearling heifers in an experiment with a three 4 x 4 Latin square design with 14 day periods. Concentrations of in vitro digestible dry matter and crude protein were greater and concentrations of neutral detergent fiber, acid detergent fiber, and indigestible neutral detergent fiber (determined by either a manual method with a 96 hour incubation or an automated method with a 48 hour incubation) were less in alfalfa hay than in the two grass hays and in smooth bromegrass hay than in big bluestem hay. Concentrations of in vitro digestible dry matter and crude protein decreased whereas those of neutral detergent fiber, acid detergent fiber and indigestible neutral detergent fiber increased with increasing forage maturity. Consumptions of dry matter, digestible dry matter, in vitro digestible dry matter, and crude protein were greater for heifers fed alfalfa hay diets than those fed the two grasses. Consumptions of total neutral detergent fiber and indigestible neutral detergent fiber, determined by the automated method with a 48 hour incubation, were greater by heifers fed diets containing big bluestem than those fed alfalfa or smooth bromegrass diets. Consumptions of acid detergent fiber and indigestible neutral detergent fiber, determined by a manual method with a 96 hour incubation, were greater for heifers fed alfalfa or big bluestem hay diets than those of heifers fed smooth bromegrass diets. Consumption of dry matter, in vivo or in vitro digestible dry matter, crude protein, neutral detergent fiber, acid detergent fiber and automated indigestible neutral detergent fiber decreased as the mature-to-immature hay ratio decreased. Diet digestibility was not affected by forage species, but increased as the mature-toimmature hay ratio decreased. Fecal excretion of dry matter and neutral detergent fiber did not differ between forage species or mature-to-immature hay ratios. Forage dry matter intake expressed as a percentage of body weight was significantly related to the concentrations of in vitro digestible dry matter (r2=.14), crude protein (r2=.17), neutral detergent fiber (r2=.20), and manual indigestible neutral detergent fiber (r2=.18) of the hays and the concentration of digestible dry matter of the diets (r2=.43).