Effect of preannealing on the morphology of LiTaO3 thin films prepared from the polymeric precursor method

Lithium tantalate (LiTaO3) thin films with 50:50 stoichiometry were deposited on silicon (100) substrates with two layers by the spin coating method using a polymeric organic solution. In order to study the influence of preannealing on the crystallinity, microstructure, grain size and roughness of the final film, two annealing procedures, slow preannealing and fast preannealing, were used. X-ray diffraction (XRD) results showed that LiTaO3 thin films are polycrystalline. It was observed by scanning electron microscopy (SEM) that the thin film, which had been thermally treated using slow preannealing, was characterized by a dense and homogeneous surface. The atomic force microscopy (AFM) studies showed that the roughness is strongly influenced by preannealing temperature. (C) 2003 Elsevier B.V. All rights reserved.

Effect of oxygen atmosphere on the morphology of LiTaO3 thin films prepared from polymeric precursor method

Lithium tantalate (LiTaO3) thin films with (50:50) stoichiometry were prepared using polymeric organic solution. The 5-layered films were deposited on silicon (100) substrates by spin coating method. The coated substrates were thermally treated at 500degreesC for 3 h under several oxygen atmospheres in order to study the influence of oxygen flow on the crystallinity, microstructure, grain size and roughness of the final film. X-ray diffraction results showed that an oxygen flow of 100 cm(3)/min leads to LiTaO3 thin films with higher crystallinity, without preferential orientation. It was observed by scanning electron microscopy (SEM) that the thickness of thin films decreases when the oxygen flow increases. The atomic force microscopy (AFM) studies showed that the grain size and roughness are strongly influenced by oxygen flow.

Morphology of the nymphoid replacement reproductives in the neotropical termite Armitermes euamignathus (Isoptera, Termitidae, Nasutitermitinae)

Numerous nymphoid reproductives were found in three field nests of Armitermes euamignathus collected in Brazil. We report here a morphological description and a biometric study of these individuals. Nymphoid replacements displayed narrow wing buds when compared with those present in nymphs from the three last instars. Thorax morphology of the nymphoids was similar to the penultimate nymphal instar (N4) or to the ultimate nymphal instar (N5), and their origin from these instars of nymphs is discussed. All the nymphoids had eyes, ocelli, and 15 antennal segments. The nymphoid females from nest 1 had different grades of physogastry and royal fat body. The nymphoid females from nests 2 and 3, the nymphoid males from all nests, and the primary king from nests 2 acid 3 had a common fat body, which is similar to that present in alates. The ovaries and the testes of nymphoids were fully mature and the corpora allata larger than those in imagoes. The mandibular glands were also enlarged in nymphoids but the tergal glands were absent. (C) 1999 Wiley-Liss, Inc.

MORPHOLOGY OF THE SALIVARY-GLAND ACINI IN GRIGIOTERMES-BEQUAERTI (ISOPTERA, TERMITIDAE, APICOTERMITINAE)

The salivary glands of females in Grigiotermes bequaerti (Snyder & Emerson 1949) are composed of many acini. Within the acini, the secretion is collected by canals that join into excretory ducts that open at the acini are formed of 3 classes of cells: secretory, parietal and canalicular. The secretory cells present 2 distinct types which, however, seem to be only different functional stages. Their secretion appears to be highly fluid and accumulates in vacuoles of low electron density. The morphological features of parietal cells point to an ionic transportation function, since they contain an intracellular canaliculus lined with microvilli, and are rich in mitochondria. The final product of the gland may result from the interaction of these 2 cells. The canicular cells located within the acini, in addition to constituting the way of secretion elimination, may have a support function serving as a point of aggregation an interconnection of secretory and parietal cells.

Seasonal morphology of the domestic quail (Coturnix coturnix japonica) testis

A histological study was conducted on the testes of adult domestic quails (Coturnix coturnix japonica) over a year. The results revealed a clear variation of testicular weight, seminiferous tubule diameter, and the thickness and composition of the germinal epithelium over the year. The highest testicular weights were detected at the end of the autumn and during the winter (short-day period), reaching a maximum, together with spermatogenic activity, in September (long-day period in the southern hemisphere). In contrast, both testicular weight and spermatogenic activity were markedly decreased at the end of spring and during summer (long-day periods in the southern hemisphere).

Corneal endothelial cell morphology of normal dogs in different ages

Endothelial cell function is essential to maintain corneal transparency, but unfortunately the regenerative capacity of the endothelium is limited. There are only a few reports describing the effect of age on morphologic appearance of corneal endothelial cells of dogs. Studies of normal corneal endothelial cells in humans and dogs have shown a decrease in endothelial cell density (ECD) and an increase in pleomorphism and polymegethism with advancing age. The purpose of this study was to investigate the effect of age on ECD and endothelial cell morphology in dogs. A total of 30 dogs were divided into three groups (10 dogs/group) based on age: group 1 (2-12 months old), group 2 (24-72 months old), and group 3 (84 months or older). Corneas were processed for light and scanning electron microscopy. Results showed only difference in cell density between group 1 and groups 2 and 3, showing an initial decrease in cell density as the animal matured. Whereas there was significantly greater variation in cell size within the dogs in group 3 than there was within the other two groups, suggesting that there was increased polymegethism and pleomorphism with advancing age.

Root instrumentation with an erbium : yttrium-aluminum-garnet laser: Effect on the morphology of fibroblasts

Objective: the purpose of this study was to evaluate the effect of erbium:yttrium-aluminum-garnet laser instrumentation of root surfaces on the morphology of fibroblasts from continuous lineage. Method and materials: Dentinal slices with 4 mm(2) of surface area were obtained from teeth extracted for severe periodontal involvement. Specimens were assigned to one of three treatment groups: group 1, application of the laser with an energy level of 250 mJ at 103 pulses per second; group 2, application of the laser with an energy level of 80 mJ at 166 pulses per second; and group 3, similar to group 2, but with concomitant water irrigation of the device. The specimens were incubated in multiwell plates containing cell culture media. After 24 hours, the specimens were submitted to routine preparation for scanning electron microscopy. Three independent and blind examiners used photomicrographs to evaluate the morphology of the fibroblasts: 0 = without cells; 1 = flat cells; 2 = round cells; and 3 = combination of round and flat cells. Results: Statistical analysis indicated that there were significant differences among treatment groups and that group 3 was significantly different from groups 1 and 2. Conclusion: There was no difference between groups 1 and 2 in the morphology of fibroblasts. Laser instrumentation with concomitant irrigation impaired the adhesion of fibroblasts to dentinal surfaces.

Morphology of Aortic Arch in Rabbits with Atherosclerosis Treated with Resveratrol

Objective: Atherosclerosis is a chronic inflammatory condition associated with the production of oxidative species. The phenoliccompound, resveratrol, seems to have cardioprotective activities preventing the oxidation of low-density lipoproteins.In this study we investigated the effect of resveratrol on prevention of induced atheromatosis, through the morphological study of the segment of aortic arch in White New Zealand rabbits.Study design: 20 rabbits were divided into four groups which received the following diet for 60 days: control group (CT) normal ration; resveratrol group (R) normal ration and resveratrol (3 mg/kg/day); cholesterol group (CL) 1.5% of cholesterol added to the ration; group cholesterol plus resveratrol (CR) 1.5% of cholesterol added to the ration and resveratrol (3 mg/kg/day). The analysis of the atherosclerotic lesions were performed by the means of appropriate histological techniques.Results and conclusions: The animals belonging to group CL showed atherosclerotic lesions with tunica intima thickening due to the presence of foam cells, placed in several disorganized layers, and extracellular lipid droplets in subendothelial conjunctive tissue.We also observed the invasion of foam cells in the beginning of tunica media. In animals belonging to group CR there were changes in the subendothelial of tunica intima, although in a minor degree of development as for the number of foam cells layers and extracellular lipid droplets. An invasion of foam cells in tunica media was observed in this group. We haven't seen any changes in tunica adventitia in any of the studied groups. There were not evident histological changes in any of the analised tunicas for groups CT and RConclusions: This study may help demonstrate that the phenolic compound, resveratrol, works as a preventive agent in the development of atherosclerotic lesions.

Effect of Hydrogen Peroxide at 35% on the Morphology of Enamel and Interference in the De-remineralization Process: An In Situ Study

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Comparative larval morphology of eight species of Hypsiboas Wagler (Amphibia, Anura, Hylidae) from Argentina and Uruguay, with a review of the larvae of this genus

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Morphology of the dental carinae in Mariliasuchus amarali (Crocodylomorpha, Notosuchia) and the pattern of tooth serration among basal Mesoeucrocodylia.

Carinated teeth are common in Mesoeucrocodylia, and the occurrence of denticles over the carinae is related to high predacious species, often referred as ziphodont. This characteristic is broadly recognized as homoplastic. Carinae morphology is cryptic, difficult to be studied under common techniques, and Scanning Electronic Microscopy (SEM) allows the access to detailed information, offering a higher degree of confidence. Previous SEM study allowed the recognition of true/false ziphodont patterns, according to the morphology of the denticles, but such studies on gondwanan mesoeucrocodyles are uncommon. Mariliasuchus amarali is an Upper Cretaceous notosuchian mesoeucrocodyle from South America (Bauru Group, Brazil), with carinated teeth and specialized dentition. Its geological and biochronological distribution are reappraised. SEM study of two teeth shows carinae composed of isolated tuberous anisomorphic true denticles, supporting previous study. Enamel ornamentation does not develop over the carinae, and fabric becomes anastomosed in middle and posterior teeth. Carinae only occur in posterior molariform teeth, related to food processing. Morphological variability of Mariliasuchus is commented, focusing on dentition. Overall characteristics, molariform morphology and wear planes support a non-predacious habit for Matiliasuchus. Matiliasuchus pattern could not be related to true/false ziphodont patterns, either by morphology or function, and is defined as ziphomorph. Ziphomorph pattern is evaluated within the range of mesoeucrocodyles. The detailed study of homoplastic characteristics, such as dental carinae, may provide useful apomorphic information for cladistic analysis.

Morphology of the walls of the cavernous sinus of Cebus apella (tufted capuchin monkey)

The morphology of the dura mater and its relationship with the structures of the cavernous sinus were analyzed in five tufted capuchin monkeys (Cebus apella) using histological sections, showing that the walls of the cavernous sinus of this species are similar to those of other primates, including man. Except for the medial wall of the cavernous sinus, the remaining walls consist of two distinct dura mater layers. The deep layer of the lateral wall of the cavernous sinus is contiguous to the sheath of the oculomotor, trochlear and ophthalmic nerves. Arterioles, venules, venous spaces, neuronal bodies and nervous fiber bundles are found on this lateral wall.

Morphology of testis and epididymis in an ethanol-drinking rat strain (UChA and UChB)

The objective of the present study was to analyze the prospective alterations of the testis and epididymis in a defined strain of alcoholic rats in order to contribute to our understanding of the effects of chronic alcoholism on reproduction. The testis and epididymis of the animals were submitted to morphological analysis by macroscopy, light microscopy and electron microscopy and to morphometric analysis. The UCh rats showed atrophy of the epithelium and reduction of testis and epididymis weight, liver hypertrophy and fat infiltration and alterations of the hypothalamus-pituitary axis. Ethanol induces changes in the weight and in the epithelium of the testis and epididymis and in the hypothalamus-pituitary axis of the UCh rats.

Effect of thermal treatment on the morphology of PLZT thin films prepared from polymeric precursor method

Lead lanthanum zirconate titanate (PLZT) thin films with (9/65/35) stoichiometry were prepared by dip coating from polymeric precursor method. The films deposited on silicon (100) substrates, were thermally treated from 450° to 700°C for 6 hours in order to study the influence of thermal treatment on the crystallinity, microstructure, grain size and roughness of the final film. X-ray diffraction results showed that PLZT phase crystallizes at low temperature (500°C) and present preferential orientation. It was observed by scanning electron microscopy (SEM) that it is possible to obtain dense thin films at temperatures around 650°C. The atomic force microscopy (AFM) studies showed that the grain size and roughness are strongly influenced by the annealing temperature.