Dynamic scale theory for characterizing surface morphology of layer-by-layer films of poly(o-methoxyaniline)

The dynamic scale theory and fractal concepts are employed in the characterization of surface morphological properties of layer-by-layer (LBL) films from poly(o-methoxyaniline) (POMA) alternated with poly(vinyl sulfonic acid) (PVS). The fractal dimensions are found to depend on the procedures to fabricate the POMA/PVS multilayers, particularly with regard to the drying procedures. LBL films obtained via drying in ambient air show a more homogeneous surface, compared to films dried under vacuum or a flow of nitrogen, due to a uniform rearrangement of polymer molecules during solvent evaporation.

Molecular dynamics simulations on devitrification: the PbF2 case

In this work molecular dynamics simulations were performed to reproduce the kinetic and thermodynamic transformations occurring during melt crystallization, vitrification, and glass crystallization (devitrification) of PbF2. Two potential parameters were analyzed in order to access the possibility of modeling these properties. These interionic potentials are models developed to describe specific characteristic of PbF2, and thermodynamic properties were well reproduced by one of them, while the other proved well adapted to simulate the crystalline structure of this fluoride. By a modeled nonisothermal heat treatment of the glass, it was shown that the devitrification of a cubic structure in which the Pb-Pb distances are in good agreement with theory and experiment. (C) 2002 American Institute of Physics.

Synthesis, spectroscopic characterization and molecular modeling of a tetranuclear platinum(II) complex with thiazolidine-4-carboxylic acid

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Elucidation of carbohydrate molecular interaction mechanism of recombinant and native ArtinM

The quartz crystal microbalance (QCM) technique has been applied for monitoring the biorecognition of ArtinM lectins at low horseradish peroxidase glycoprotein (HRP) concentrations, using a simple kinetic model based on Langmuir isotherm in previous work.18 The latter approach was consistent with the data at dilute conditions but it fails to explain the small differences existing in the jArtinM and rArtinM due to ligand binding concentration limit. Here we extend this analysis to differentiate sugar-binding event of recombinant (rArtinM) and native (jArtinM) ArtinM lectins beyond dilute conditions. Equivalently, functionalized quartz crystal microbalance with dissipation monitoring (QCM-D) was used as real-time label-free technique but structural-dependent kinetic features of the interaction were detailed by using combined analysis of mass and dissipation factor variation. The stated kinetic model not only was able to predict the diluted conditions but also allowed to differentiate ArtinM avidities. For instance, it was found that rArtinM avidity is higher than jArtinM avidity whereas their conformational flexibility is lower. Additionally, it was possible to monitor the hydration shell of the binding complex with ArtinM lectins under dynamic conditions. Such information is key in understanding and differentiating protein binding avidity, biological functionality, and kinetics. © 2013 American Chemical Society.

Fabricação e caracterização de filmes finos de perileno: arquitetura molecular e aplicações sensoriais

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Eletrônica molecular via método híbrido DFT/FGNE em anéis fenilas acoplados a eletrodos metálicos de nanotubos de carbono: a regra de conformação e quiralidade molecular

Nesta tese, investigamos detalhadamente as propriedades de transporte eletrônico, conformacional e de simetria de estruturas de Nanotubos de Carbono de Parede Simples zigzag (9,0), NCPS zz9, acopladas a anéis fenilas (2, 3, 4 e 5) sob influência de campo elétrico externo (voltagem) via método híbrido da Teoria do Funcional Densidade (DFT) do tipo B3LYP 6-311G(d,p) combinado com Função de Green de Não Equilíbrio (FGNE) e Teoria de Grupo. Verificamos uma boa relação entre: 1- o índice quiral () por Teoria de Grupo e a lei do cos2 (, ângulo diedral) por geometria sob a influência de campo elétrico externo, pois  só depende das posições atômicas (), das conformações, e também está fortemente correlacionada a corrente que passa através do sistema; 2- a condutância normalizada (G/Go) é proporcional a cos2 na região do gap (EHOMO-ELUMO), isto é, nas regiões onde ocorre a ressonância e a resistência diferencial negativa (RDN); 3- o gráfico Fowler-Northeim (FN) exibe mínimo de voltagem (Vmin) que ocorre sempre que a cauda de um pico de transmissão ressonante entra na janela de voltagem, isto é, quando nessas estruturas ocorre uma RDN, pois o número de RDN na curva I-V está associado ao número de Vmin no gráfico FN e pode ser explicado pelo modelo de transporte molecular coerente; 4- a altura da barreira (EF - EHOMO e ELUMO - EF) como função do comprimento molecular; 5- Vmin como função da altura da barreira (EF - EHOMO) e do comprimento molecular. Assim, 1 implica que a conformação molecular desempenha um papel preponderante na determinação das propriedades de transporte da junção; 2 sugere que a lei do cos2 tem uma aplicabilidade mais geral independentemente da natureza dos eletrodos; 3 serve como um instrumento espectroscópico e também para identificar a molécula na junção; 4 e 5 a medida que o comprimento molecular atinge um certo valor (1,3nm) o Vmin permanece praticamente inalterado. Os resultados mostraram que as propriedades estruturais sofrem alterações significativas com o aumento da voltagem que estão em boa concordância com os valores encontrados na literatura. O comportamento das curvas IxV e G/GoxV perdem sua dependência linear para dar origem a um comportamento não linear com aparecimento de RDN. Tal ponto revela a modificação estrutural sofrida pelo sistema. A curva IxV confirmou as afirmações que foram feitas através da análise estrutural para o sistema considerado e mostrou como se dá o fluxo de carga nos sistemas analisados.

Detection of determinant genes and diagnostic via Item Response Theory

ABSTRACT: This work presents a method to analyze characteristics of a set of genes that can have an influence in a certain anomaly, such as a particular type of cancer. A measure is proposed with the objective of diagnosing individuals regarding the anomaly under study and some characteristics of the genes are analyzed. Maximum likelihood equations for general and particular cases are presented.

Molecular properties of the PCO radical: heat of formation and the isomerization pathways

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Controle de dissociação molecular com ferramentas de dinâmica não linear

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Stretching of BDT-gold molecular junctions: thiol or thiolate termination?

It is often assumed that the hydrogen atoms in the thiol groups of a benzene-1,4-dithiol dissociate when Au-benzene-1,4-dithiol-Au junctions are formed. We demonstrate, by stability and transport property calculations, that this assumption cannot be made. We show that the dissociative adsorption of methanethiol and benzene-1,4-dithiol molecules on a flat Au(111) surface is energetically unfavorable and that the activation barrier for this reaction is as high as 1 eV. For the molecule in the junction, our results show, for all electrode geometries studied, that the thiol junctions are energetically more stable than their thiolate counterparts. Due to the fact that density functional theory (DFT) within the local density approximation (LDA) underestimates the energy difference between the lowest unoccupied molecular orbital and the highest occupied molecular orbital by several electron-volts, and that it does not capture the renormalization of the energy levels due to the image charge effect, the conductance of the Au-benzene-1,4-dithiol-Au junctions is overestimated. After taking into account corrections due to image charge effects by means of constrained-DFT calculations and electrostatic classical models, we apply a scissor operator to correct the DFT energy level positions, and calculate the transport properties of the thiol and thiolate molecular junctions as a function of the electrode separation. For the thiol junctions, we show that the conductance decreases as the electrode separation increases, whereas the opposite trend is found for the thiolate junctions. Both behaviors have been observed in experiments, therefore pointing to the possible coexistence of both thiol and thiolate junctions. Moreover, the corrected conductance values, for both thiol and thiolate, are up to two orders of magnitude smaller than those calculated with DFT-LDA. This brings the theoretical results in quantitatively good agreement with experimental data.

Theoretical study of molecular and electronic structures of 5(1) knot systems: two-layered ONIOM calculations

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Capacitance spectroscopy and density functional theory

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Estudos computacionais de esfingomielinases D: docking, dinâmica molecular e métodos híbridos QM/MM

Pós-graduação em Biofísica Molecular - IBILCE

MOLECULAR DYNAMICS STUDIES OF SIMPLE MODEL FLUIDS AND WATER CONFINED IN CARBON NANOTUBE

Molecular Dynamics (MD) simulation is one of the most important computational techniques with broad applications in physics, chemistry, chemical engineering, materials design and biological science. Traditional computational chemistry refers to quantum calculations based on solving Schrodinger equations. Later developed Density Functional Theory (DFT) based on solving Kohn-Sham equations became the more popular ab initio calculation technique which could deal with ~1000 atoms by explicitly considering electron interactions. In contrast, MD simulation based on solving classical mechanics equations of motion is a totally different technique in the field of computational chemistry. Electron interactions were implicitly included in the empirical atom-based potential functions and the system size to be investigated can be extended to ~106 atoms. The thermodynamic properties of model fluids are mainly determined by macroscopic quantities, like temperature, pressure, density. The quantum effects on thermodynamic properties like melting point, surface tension are not dominant. In this work, we mainly investigated the melting point, surface tension (liquid-vapor and liquid-solid) of model fluids including Lennard-Jones model, Stockmayer model and a couple of water models (TIP4P/Ew, TIP5P/Ew) by means of MD simulation. In addition, some new structures of water confined in carbon nanotube were discovered and transport behaviors of water and ions through nano-channels were also revealed.

Estudos computacionais de esfingomielinases D: docking, dinâmica molecular e métodos híbridos QM/MM

Pós-graduação em Biofísica Molecular - IBILCE