Segregated modeling and selection of populations for polyhydroxyalkanoate production by mixed microbial cultures

Dissertação apresentada na Faculdade de Ciências e Tecnologia da Universidade Nova de Lisboa para obtenção do grau de Mestre em Engenharia Química e Bioquímica

Development of mixed matrix membranes with metal - organic framework and ionic liquids for biogas upgrading

Dissertation presented to Faculdade de Ciências e Tecnologia, Universidade Nova de Lisboa for obtaining the master degree in Membrane Engineering

“One-pot” enzymatic conversion of CO2 to methanol

Dissertação para obtenção do Grau de Mestre em Biotecnologia

Cash conversion cycle across industries

A Work Project, presented as part of the requirements for the Award of a Masters Degree in Management from the NOVA – School of Business and Economics

Constraint-based modelling of mixed microbial populations: Application to polyhydroxyalkanoates production

Dissertação para obtenção do Grau de Doutor em Engenharia Química e Bioquímica

Barriers preventing the successful integration of mental health services into Primary Health Care in Nigeria : a mixed methods approach

RESUMO: A Nigéria tem uma população estimada em cerca de 170 milhões de pessoas. O número de profissionais de saúde mental é muito diminuto, contando apenas com 150 psiquiatras o que perfaz aproximadamente um rácio de psiquiatra: população de mais de 1:1 milhão de pessoas. O Plano Nacional de Saúde Mental de 1991 reconheceu esta insuficiência e recomendou a integração dos serviços de saúde mental nos cuidados de saúde primários (CSP). Depois de mais de duas décadas, essa política não foi ainda implementada. Este estudo teve como objetivos mapear a estrutura organizacional dos serviços de saúde mental da Nigéria, e explorar os desafios e barreiras que impedem a integração bem-sucedida dos serviços de saúde mental nos cuidados de saúde primários, isto segundo a perspectiva dos profissionais dos cuidados de saúde primários. Com este objetivo, desenvolveu-se um estudo exploratório sequencial e utilizou-se um modelo misto para a recolha de dados. A aplicação em simultâneo de abordagens qualitativas e quantitativas permitiram compreender os problemas relacionados com a integração dos serviços de saúde mental nos CSP na Nigéria. No estudo qualitativo inicial, foram realizadas entrevistas com listagens abertas a 30 profissionais dos CSP, seguidas de dois grupos focais com profissionais dos CSP de duas zonas governamentais do estado de Oyo de forma a obter uma visão global das perspectivas destes profissionais locais sobre os desafios e barreiras que impedem uma integração bem-sucedida dos serviços de saúde mental nos CSP. Subsequentemente, foram realizadas entrevistas com quatro pessoas-chave, especificamente coordenadores e especialistas em saúde mental. Os resultados do estudo qualitativo foram utilizados para desenvolver um questionário para análise quantitativa das opiniões de uma amostra maior e mais representativa dos profissionais dos CSP do Estado de Oyo, bem como de duas zonas governamentais locais do Estado de Osun. As barreiras mais comummente identificadas a partir deste estudo incluem o estigma e os preconceitos sobre a doença mental, a formação inadequada dos profissionais dos CPS sobre saúde mental, a perceção pela equipa dos CSP de baixa prioridade de ação do Governo, o medo da agressão e violência pela equipa dos CSP, bem como a falta de disponibilidade de fármacos. As recomendações para superar estes desafios incluem a melhoria sustentada dos esforços da advocacia à saúde mental que vise uma maior valorização e apoio governamental, a formação e treino organizados dos profissionais dos cuidados primários, a criação de redes de referência e de apoio com instituições terciárias adjacentes, e o engajamento da comunidade para melhorar o acesso aos serviços e à reabilitação, pelas pessoas com doença mental. Estes resultados fornecem indicações úteis sobre a perceção das barreiras para a integração bem sucedida dos serviços de saúde mental nos CSP, enquanto se recomenda uma abordagem holística e abrangente. Esta informação pode orientar as futuras tentativas de implementação da integração dos serviços de saúde mental nos cuidados primários na Nigéria.------------ABSTRACT: Nigeria has an estimated population of about 170 million people but the number of mental health professionals is very small, with about 150 psychiatrists. This roughly translates to a psychiatrist:population ratio of more than 1:1 million people. The National Mental Health Policy of 1991 recognized this deficiency and recommended the integration of mental health into primary health care (PHC) delivery system. After more than two decades, this policy has yet to be implemented. This study aimed to map out the organizational structure of the mental health systems in Nigeria, and to explore the challenges and barriers preventing the successful integration of mental health into primary health care, from the perspective of the primary health care workers. A mixed methods exploratory sequential study design was employed, which entails the use of sequential timing in the combined methods of data collection. A combination of qualitative and uantitative approaches in sequence, were utilized to understand the problems of mental health services integration into PHC in Nigeria. The initial qualitative phase utilized free listing interviews with 30 PHC workers, followed by two focus group discussions with primary care workers from two Local Government Areas (LGA) of Oyo State to gain useful insight into the local perspectives of PHC workers about the challenges and barriers preventing successful integration of mental health care services into PHC. Subsequently, 4 key informant interviews with PHC co-ordinators and mental health experts were carried out. The findings from the qualitative study were utilized to develop a quantitative study questionnaire to understand the opinions of a larger and more representative sample of PHC staff in two more LGAs of Oyo State, as well as 2 LGAs from Osun State. The common barriers identified from this study include stigma and misconceptions about mental illness, inadequate training of PHC staff about mental health, low government priority, fear of aggression and violence by the PHC staff, as well as non-availability of medications. Recommendations for overcoming these challenges include improved and sustained efforts at mental health advocacy to gain governmental attention and support, organized training and retraining for primary care staff, establishment of referral and supportive networks with neighbouring tertiary facilities and community engagement to improve service utilization and rehabilitation of mentally ill persons. These findings provide useful insight into the barriers to the successful integration of mental health into PHC, while recommending a holistic and comprehensive approach. This information can guide future attempts to implement the integration of mental health into primary care in Nigeria.

Challenges of converting nonprofit in for-profit-reasons decision making and key success factores of a conversion

Due to external constraints (opposed by the market and legal system) and internal changes nonprofit organizations have been converting to for-profit entities combining commercial revenue and social value creation. To create an understanding of the conversion process considering its challenges, the reasons, the decision-making process and key success factors of a conversion are examined. Therefore, a two-step research procedure is used combining literature research and a multiple case study approach based on expert interviews with known companies. The outcome is a helpful guideline (including a decision matrix) for social entrepreneurs that might face a conversion.

Synergistic interactions in mixed-species biofilms of pathogenic bacteria from the respiratory tract

IntroductionMixed-species biofilms are involved in a wide variety of infections. We studied the synergistic interactions during dual-species biofilm formation among isolates of Pseudomonas aeruginosa, Acinetobacter baumannii, and Stenotrophomonas maltophilia.MethodsIsolates were cultured as single-species and all possible combinations of dual-species biofilms.ResultsThe 61 A. baumannii biofilms increased by 26-fold when cultured with S. maltophilia isolates; 62 A. baumannii biofilms increased by 20-fold when cultured with S. maltophilia isolates; and 31 P. aeruginosa biofilms increased by 102-fold when cultured with S. maltophilia 106.ConclusionsSynergy was observed between two isolates, including those that inherently lacked biofilm formation ability.

Impact of carbon/nitrogen feeding strategy on polyhydroxyalkanoates production using mixed microbial cultures

Polyhydroxyalkanoates (PHA) production using mixed microbial cultures (MMC) requires a multi-stage process involving the microbial selection of PHA-storing microorganisms, typically operated in sequencing batch reactors (SBR), and an accumulation reactor. Since low-cost renewable feedstocks used as process feedstock are often nitrogen-deficient, nutrient supply in the selection stage is required to allow for microbial growth. In this context, the possibility to uncouple nitrogen supply from carbon feeding within the SBR cycle has been investigated in this study. Moreover, three different COD:N ratios (100:3.79, 100:3.03 and 100:2.43) were tested in three different runs which also allowed the study of COD:N ratio on the SBR performance. For each run, a synthetic mixture of acetic and propionic acids at an overall organic load rate of 8.5 gCOD L-1 d-1 was used as carbon feedstock, whereas ammonium sulfate was the nitrogen source in a lab-scale sequence batch reactor (SBR) with 1 L of working volume. Besides, a sludge retention time (SRT) of 1 d was used as well as a 6 h cycle length. The uncoupled feeding strategy significantly enhanced the selective pressure towards PHA-storing microorganisms, resulting in a two-fold increase in the PHA production (up to about 1.3 gCOD L-1). A high storage response was observed for the two runs with the COD:N ratios (gCOD:gN) of 100:3.79 and 100:3.03, whereas the lowest investigated nitrogen load resulted in very poor performance in terms of polymer production. In fact, strong nitrogen limitation caused fungi to grow and a very poor storage ability by microorganisms that thrived in those conditions. The COD:N ratio also affected the polymer composition, indeed the produced poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) showed a variable HV content (1-20 %, w/w) among the three runs, lessening as the COD:N increased. This clearly suggests the possibility to use the COD:N ratio as a tool for tuning polymer properties regardless the composition of the feedstock.

Polyhydroxyalkanoates production by photosynthetic mixed cultures

Polyhydroxyalkanoates (PHAs) are natural biologically synthesized polymers that have been the subject of much interest in the last decades due to their biodegradability. Thus far, its microbial production is associated with high operational costs, which increases PHA prices and limits its marketability. To address this situation, this thesis’ work proposes the utilization of photosynthetic mixed cultures (PMC) as a new PHA production system that may lead to a reduction in operational costs. In fact, the operational strategies developed in this work led to the selection of PHA accumulating PMCs that, unlike the traditional mixed microbial cultures, do not require aeration, thus permitting savings in this significant operational cost. In particular, the first PHA accumulating PMC tested in this work was selected under non-aerated illuminated conditions in a feast and famine regime, being obtained a consortium of bacteria and algae, where photosynthetic bacteria accumulated PHA during the feast phase and consumed it for growth during the famine phase, using the oxygen produced by algae. In this symbiotic system, a maximum PHA content of 20% cell dry weight (cdw) was reached, proving for the first time, the capacity of a PMC to accumulate PHA. During adaptation to dark/light alternating conditions, the culture decreased its algae content but maintained its viability, achieving a PHA content of 30% cdw. Also, the PMC was found to be able to utilize different volatile fatty acids for PHA production, accumulating up to 20% cdw of a PHA co-polymer composed of 3-hydroxybutyrate (3HB) and 3-hydroxyvalerate (HV) monomers. Finally, a new selective approach for the enrichment of PMCs in PHA accumulating bacteria was tested. Instead of imposing a feast and famine regime, a permanent feast regime was used, thus selecting a PMC that was capable of simultaneously growing and accumulating PHA, being attained a maximum PHA content of 60% cdw, the highest value reported for a PMC thus far. The results presented in this thesis prospect the utilization of cheap, VFA-rich fermented wastes as substrates for PHA production, which combined with this new photosynthetic technology opens up the possibility for direct sunlight illumination, leading to a more cost-effective and environmentally sustainable PHA production process.

The mixed impact of design thinking on business collaborations

The present work project investigates the implications of design thinking on an interbusiness collaborative project, unveiling both the benefits and fragilities that derive from the use of such methodology within the mentioned context. The study is organized in two parts. The first one starts with a literature review on the two relevant frames of reference – design thinking and business collaboration. It proceeds to the creation of a conceptual framework to assess the potential value of the design-based approach. The second part focuses on the practical application of to the newly developed instrument to the inTRAIN project – R&D for railway interiors.

A case study on the conversion of an internal combustion engine vehicle into an electric vehicle

This paper presents the conversion process of a traditional Internal Combustion Engine vehicle into an Electric Vehicle. The main constitutive elements of the Electric Vehicle are presented. The developed powertrain uses a three-phase inverter with Field Oriented Control and space vector modulation. The developed on-board batteries charging system can operate in Grid-to-Vehicle and Vehicle-to-Grid modes. The implemented prototypes were tested, and experimental results are presented. The assembly of these prototypes in the vehicle was made in accordance with the Portuguese legislation about vehicles conversion, and the main adopted solutions are presented.

Non emergency patients transport - a mixed integer linear programming

This work presents a model and a heuristic to solve the non-emergency patients transport (NEPT) service issues given the new rules recently established in Portugal. The model follows the same principle of the Team Orienteering Problem by selecting the patients to be included in the routes attending the maximum reduction in costs when compared with individual transportation. This model establishes the best sets of patients to be transported together. The model was implemented in AMPL and a compact formulation was solved using NEOS Server. A heuristic procedure based on iteratively solving problems with one vehicle was presented, and this heuristic provides good results in terms of accuracy and computation time.

Effects of residues on the degradation of PHA produced from mixed microbial cultures and processed in extrusion

Thermal degradation upon melting is one of the major drawbacks reported for polyhydroxyalkanoates (PHA). However, the role of residues originating from the fermentation and the extraction steps on the thermal stability of this class of biopolymers still needs to be clarified. In the particular case of PHA produced from mixed microbial cultures (MMC), this topic is even less documented in the literature. Here, two polyhydroxy(butyrate-co-valerate) (PHBV) produced from MMC enriched in PHA accumulating organisms and fed with cheese whey were studied. A micro extrusion line is used to produce filaments and assess the processability and the degradation of processed PHBV. The prototype micro extrusion line allows for studying grams of materials. The two PHBV contain 18 mol% HV. PHBV was recovered with 11 wt% residues, and further submitted to a purification procedure resulting in a second biopolyester containing less than 2 wt% impurities. The thermorheological characterization of the two PHBV is first presented, together with their semicrystalline properties. Then the processing windows of the two biopolyesters are presented. Finally, the properties of extruded filaments are reported and the thermomechanical degradation of PHBV is extensively studied. The structure was assessed by wide angle X-ray diffraction, mechanical and rheological properties are reported, thermal properties are studied with differential scanning calorimetry and thermogravimetric analysis, whereas Fourier Transform Infrared spectroscopy was used to assess the impact of the extrusion on PHBV chemical structure. All results obtained with the two PHBV are compared to assess the effects of residues on both PHBV processability and degradation.

Comparison of oleate conversion under microaerophilic and anaerobic conditions

Excessive accumulation of Long Chain Fatty Acids (LCFA) in methanogenic bioreactors is the cause of process failure associated to a severe decrease in methane production. In particular, fast and persistent accumulation of palmitate is critical and still not elucidated. Aerobes or facultative anaerobes were detected in those reactors, raising new questions on LCFA biodegradation. To get insight into the influence of oxygen, two bioreactors were operated under microaerophilic and anaerobic conditions, with oleate at 1 and 4 gCOD/(L d). Palmitate accumulated up to 2 and 16 gCOD/L in the anaerobic and microaerophilic reactor, respectively, which shows the importance of oxygen in this conversion. A second experiment was designed to understand the dynamics of oleate to palmitate conversion. A CSTR and a PFR were assembled in series and fed with oleate under microaerophilic conditions. HRT from 6 to 24 h were applied in the CSTR, and 14 to 52 min in the PFR. In the PFR a biofilm was formed where palmitate accounted for 82% of total LCFA. Pseudomonas was the predominant genus (42 %) in this biofilm, highlighting the role of aerobic and facultative anaerobic bacteria in LCFA bioconversion.