A non-malleable group key exchange protocol robust against active insiders

In this paper we make progress towards solving an open problem posed by Katz and Yung at CRYPTO 2003. We propose the first protocol for key exchange among n ≥2k+1 parties which simultaneously achieves all of the following properties: 1. Key Privacy (including forward security) against active attacks by group outsiders, 2. Non-malleability — meaning in particular that no subset of up to k corrupted group insiders can ‘fix’ the agreed key to a desired value, and 3. Robustness against denial of service attacks by up to k corrupted group insiders. Our insider security properties above are achieved assuming the availability of a reliable broadcast channel.

The impacts of exchange rate volatility on vegetable trade flows

Trade flows of commodities are generally affected by the principles of comparative advantage in a free trade. However, trade flows might be enhanced or distorted not only by various government interventions, but also by exchange rate fluctuations among others. This study applies a commodity-specific gravity model to selected vegetable trade flows among Organization for Economic Co-operation and Development (OECD) countries to determine the effects of exchange rate uncertainty on the trade flows. Using the data from 1996 to 2002, the results show that, while the exchange rate uncertainty significantly reduces trade in the majority of commodity flows, there is evidence that both short- and long-term volatility have positive effect on trade flows of specific commodities. This study also tests the regional preferential trade agreements such as the North American Free Trade Agreement (NAFTA), the Asia-Pacific Economic Cooperation (APEC) and the EU, and their different effects on commodities.

UpaG, a new member of the Trimeric Autotransporter family of Adhesins in Uropathogenic Escherichia coli

The ability of Escherichia coli to colonize both intestinal and extraintestinal sites is driven by the presence of specific virulence factors, among which are the autotransporter (AT) proteins. Members of the trimeric AT adhesin family are important virulence factors for several gram-negative pathogens and mediate adherence to eukaryotic cells and extracellular matrix (ECM) proteins. In this study, we characterized a new trimeric AT adhesin (UpaG) from uropathogenic E. coli (UPEC). Molecular analysis of UpaG revealed that it is translocated to the cell surface and adopts a multimeric conformation. We demonstrated that UpaG is able to promote cell aggregation and biofilm formation on abiotic surfaces in CFT073 and various UPEC strains. In addition, UpaG expression resulted in the adhesion of CFT073 to human bladder epithelial cells, with specific affinity to fibronectin and laminin. Prevalence analysis revealed that upaG is strongly associated with E. coli strains from the B2 and D phylogenetic groups, while deletion of upaG had no significant effect on the ability of CFT073 to colonize the mouse urinary tract. Thus, UpaG is a novel trimeric AT adhesin from E. coli that mediates aggregation, biofilm formation, and adhesion to various ECM proteins.

Health Information Exchange in the wake of ‘big data’ paradigm – the theme is from ‘quality of information to quality of life’

Health Information Exchange (HIE) is an interesting phenomenon. It is a patient centric health and/or medical information management scenario enhanced by integration of Information and Communication Technologies (ICT). While health information systems are repositioning complex system directives, in the wake of the ‘big data’ paradigm, extracting quality information is challenging. It is anticipated that in this talk, ICT enabled healthcare scenarios with big data analytics will be shared. In addition, research and development regarding big data analytics, such as current trends of using these technologies for health care services and critical research challenges when extracting quality of information to improve quality of life will be discussed.

Member perceptions of ESG investing through superannuation

Purpose Environmental, social and governance (ESG) risks have the potential to negatively impact financial returns, yet few superannuation funds integrate these considerations into their investment selection. The Cooper Review (2010) identified a lack of member demand as a key impediment to ESG investing by superannuation funds. Given this problem, the aim of this study is to explore superannuation fund members’ perceptions of ESG investing by their funds in order to identify reasons for the lack of demand. Design/methodology/approach An on-line survey was developed and distributed to assess possible reasons why members do not select ESG investment options. In total, 549 Australian superannuation fund members responded to the survey. Findings Results indicate that the majority of superannuation fund members are interested in ESG investing. Members lack awareness of their fund’s approach to ESG investing, and they do not perceive there to be a financial penalty from ESG investing. Finally, members show a preference for consideration of governance issues over both social and environmental issues. Research limitations Respondents are well educated and the majority did not choose their superannuation fund. There was no measure of financial literacy included in the research instrument. There is also a general limitation in surveying superannuation fund members when they lack knowledge about superannuation. Practical implications The results indicate that superannuation members are interested in both superannuation and ESG investing. Given the low take-up of ESG investment options, this finding raises the question of how effectively funds are engaging their members. Social implications The results should be of interest to superannuation funds and may lead to renewed interest in promoting ESG products. Originality/value This is the first study to examine superannuation members’ attitudes and behaviours towards ESG investing in the context of superannuation. The study also adds to our understanding of member decision making in the $1.8 trillion superannuation industry.

Cultural relativity as exchange : J.W. Lindt’s bush character and Aboriginal from The Grafton Album (circa 1872)

J.W.Lindt’s Colonial man and Aborigine image from the GRAFTON ALBUM: “On chemistry and optics all does not depend, art must with these in triple union blend” (text from J.W. Lindt’s photographic backing card)...

The burden of cancer in member countries of the association of southeast asian nations (ASEAN)

This paper presents the most recent data on cancer rates and the burden of cancer in the ASEAN region. Epidemiological data were sourced from GLOBOCAN 2008 and disability adjusted life years (DALYs) lost were estimated using the standard methodology developed within the World Health Organization's Global Burden of Disease study. Overall, it was estimated there were over 700,000 new cases of cancer and 500,000 cancer deaths in ASEAN in the year 2008, leading to approximately 7.5 million DALYs lost in one year. The most commonly diagnosed cancers were lung (98,143), breast (86,842) and liver cancers (74,777). The most common causes of cancer death were lung cancer (85,772), liver cancer (69,115) and colorectal cancer (44,280). The burden of cancer in terms of DALYs lost was highest in Laos, Viet Nam and Myanmar and lowest in Brunei, Singapore and the Philippines. Significant differences in the patterns of cancer from country to country were observed. Another key finding was the major impact played by population age distribution on cancer incidence and mortality. Cancer rates in ASEAN are expected to increase with ageing of populations and changes in lifestyles associated with economic development. Therefore, ASEAN member countries are strongly encouraged to put in place cancer-control health carepolicies, focussed on strengthening the health systems to cope with projected increases in cancer prevention, treatment and management needs.

Assessment of the molecular structure of an intermediate member of the triplite-zwieselite mineral series: A raman and infrared study

The mineral series triplite-zwieselite with theoretical formula (Mn2+)2(PO4)(F)-(Fe2+)2(PO4)(F) from the El Criolo granitic pegmatite, located in the Eastern Pampean Ranges of Córdoba Province, was studied using electron microprobe, thermogravimetry, and Raman and infrared spectroscopy. The analysis of the mineral provided a formula of (Fe1.00, Mn0.85, Ca0.08, Mg0.06)∑2.00(PO4)1.00(F0.80, OH0.20)∑1.00. An intense Raman band at 981 cm−1 with a shoulder at 977 cm−1 is assigned to the ν1 symmetric stretching mode. The observation of two bands for the phosphate symmetric stretching mode offers support for the concept that the phosphate units in the structure of triplite-zwieselite are not equivalent. Low-intensity Raman bands at 1012, 1036, 1071, 1087, and 1127 cm−1 are assigned to the ν3 antisymmetric stretching modes. A set of Raman bands at 572, 604, 639, and 684 cm−1 are attributed to the ν4 out-of-plane bending modes. A single intense Raman band is found at 3508 cm−1 and is assigned to the stretching vibration of hydroxyl units. Infrared bands are observed at 3018, 3125, and 3358 cm−1 and are attributed to water stretching vibrations. Supplemental materials are available for this article. Go to the publisher's online edition of Spectroscopy Letters to view the supplemental file.

Exploration of the fundamental equilibrium behaviour of calcium exchange with weak acid cation resins

This study evaluated the complexity of calcium ion exchange with sodium exchanged weak acid cation resin (DOW MAC-3). Exchange equilibria recorded for a range of different solution normalities revealed profiles which were represented by conventional “L” or “H” type isotherms at low values of equilibrium concentration (Ce) of calcium ions, plus a superimposed region of increasing calcium uptake was observed at high Ce values. The loading of calcium ions was determined to be ca. 53.5 to 58.7 g/kg of resin when modelling only the sorption curve created at low Ce values,which exhibited a well-defined plateau. The calculated calcium ion loading capacity for DOWMAC-3 resin appeared to correlate with the manufacturer's recommendation. The phenomenon of super equivalent ion exchange (SEIX) was observed when the “driving force” for the exchange process was increased in excess of 2.25 mmol calcium ions per gram of resin in the starting solution. This latter event was explained in terms of displacement of sodium ions from sodium hydroxide solution which remained in the resin bead following the initial conversion of the as supplied “H+” exchanged resin sites to the “Na+” version required for softening studies. Evidence for hydrolysis of a small fraction of the sites on the sodium exchanged resin surface was noted. The importance of carefully choosing experimental parameters was discussed especially in relation to application of the Langmuir–Vageler expression. This latter model which compared the ratio of the initial calcium ion concentration in solution to resin mass, versus final equilibrium loading of the calcium ions on the resin; was discovered to be an excellent means of identifying the progress of the calcium–sodium ion exchange process. Moreover, the Langmuir–Vageler model facilitated standardization of various calcium–sodium ion exchange experiments which allowed systematic experimental design.

Equilibrium and column studies of iron exchange with strong acid cation resin

The exchange of iron species from iron (III) chloride solutions with a strong acid cation resin has been investigated in relation to a variety of water and wastewater applications. A detailed equilibrium isotherm analysis was conducted wherein models such as Langmuir Vageler, Competitive Langmuir, Freundlich, Temkin, Dubinin Astakhov, Sips and Brouers-Sotolongo were applied to the experimental data. An important conclusion was that both the bottle-point method and solution normality used to generate the ion exchange equilibrium information influenced which sorption model fitted the isotherm profiles optimally. Invariably, the calculated value for the maximum loading of iron on strong acid cation resin was substantially higher than the value of 47.1 g/kg of resin which would occur if one Fe3+ ion exchanged for three “H+” sites on the resin surface. Consequently, it was suggested that above pH 1, various iron complexes sorbed to the resin in a manner which required less than 3 sites per iron moiety. Column trials suggested that the iron loading was 86.6 g/kg of resin when 1342 mg/L Fe (III) ions in water were flowed at 31.7 bed volumes per hour. Regeneration with 5 to 10 % HCl solutions reclaimed approximately 90 % of exchange sites.

An examination of isotherm generation : impact of bottle-point method upon potassium ion exchange with strong acid cation resin

This paper relates to the importance of impact of the chosen bottle-point method when conducting ion exchange equilibria experiments. As an illustration, potassium ion exchange with strong acid cation resin was investigated due to its relevance to the treatment of various industrial effluents and groundwater. The “constant mass” bottle-point method was shown to be problematic in that depending upon the resin mass used the equilibrium isotherm profiles were different. Indeed, application of common equilibrium isotherm models revealed that the optimal fit could be with either the Freundlich or Temkin equations, depending upon the conditions employed. It could be inferred that the resin surface was heterogeneous in character, but precise conclusions regarding the variation in the heat of sorption were not possible. Estimation of the maximum potassium loading was also inconsistent when employing the “constant mass” method. The “constant concentration” bottle-point method illustrated that the Freundlich model was a good representation of the exchange process. The isotherms recorded were relatively consistent when compared to the “constant mass” approach. Unification of all the equilibrium isotherm data acquired was achieved by use of the Langmuir Vageler expression. The maximum loading of potassium ions was predicted to be at least 116.5 g/kg resin.