Effects of oxidante acid treatments on carbon-templated hierarchical SAPO-11 materials: synthesis, characterization and catalytic evaluation in n-decane hydroiosomerization

Hierarchical SAPO-11 was synthesized using a commercial Merck carbon as template. Oxidant acid treatments were performed on the carbon matrix in order to investigate its influence on the properties of SAPO-11. Structural, textural and acidic properties of the different materials were evaluated by XRD, SEM, N-2 adsorption, pyridine adsorption followed by IR spectroscopy and thermal analyses. The catalytic behavior of the materials (with 0.5 wt.% Pt, introduced by mechanic mixture with Pt/Al2O3), were studied in the hydroisomerization of n-decane. The hierarchical samples showed higher yields in monobranched isomers than typical microporous SAPO-11, as a direct consequence of the modification on both porosity and acidity, the later one being the most predominant. (C) 2014 Elsevier B.V. All rights reserved.

Intrusion of Lamprophyre dyke and related deformation effects in the host rock salt: A case study from the Loulé Diapir, Portugal

A rock salt-lamprophyre dyke contact zone (sub-vertical, NE-SW strike) was investigated for its petrographic, mechanic and physical properties by means of anisotropy of magnetic susceptibility CAMS) and rock magnetic properties, coupled with quantitative microstructural analysis and thermal mathematical modelling. The quantitative microstructural analysis of halite texture and solid inclusions revealed good spatial correlation with AMS and halite fabrics. The fabrics of both lamprophyre and rock salt record the magmatic intrusion, "plastic" flow and regional deformation (characterized by a NW-SE trending steep foliation). AMS and microstructural analysis revealed two deformation fabrics in the rock salt: (1) the deformation fabrics in rock salt on the NW side of the dyke are associated with high temperature and high fluid activity attributed to the dyke emplacement; (2) On the opposite side of the dyke, the emplacement-related fabric is reworked by localized tectonic deformation. The paleomagnetic results suggest significant rotation of the whole dyke, probably during the diapir ascent and/or the regional Tertiary to Quaternary deformation. (C) 2014 Elsevier B.V. All rights reserved.

Projeto de uma ponte atirantada rodoferroviária sobre o rio Lima, Viana do Castelo

Trabalho académico com o objetivo do autor desenvolver um estudo prévio e um projeto de uma travessia sobre o rio Lima, na cidade de Viana do Castelo constituída por uma ponte de tirantes rodoferroviária. O projeto académico visa, também, desenvolver e compreender: os conceitos básicos, as metodologias de conceção, e o funcionamento de estruturas desse género. O motivo principal da escolha do tema é a necessidade de uma alternativa à ponte Eiffel em Viana do Castelo, e juntando o facto de em Portugal não existir nenhuma obra de arte de tirantes rodoferroviária até ao presente, seria interessante estudar e projetar uma estrutura rodoferroviária de tirantes. Das diversas possibilidades de sistemas estruturais estudados, adotou-se uma ponte que acomodará 4 vias rodoviárias e 2 vias ferroviárias, com um desenvolvimento total de 660 metros, constituída por dois vãos laterais com 165 metros cada um, e com um vão central de 330 metros. A obra de arte será em semi-leque com dois planos de tirantes, ancorados a duas torres de betão em Y invertido de altura aproximadamente de 110 metros. O tabuleiro será duplo misto aço-betão, constituído por duas vigas trianguladas do tipo Warren, e por carlingas, afastadas entre si de 15 metros com secções tubulares metálicas de espessura variável. As carlingas ao nível superior suportam a laje de betão, que constitui a rodovia, e inferiormente, suportam outra laje de betão para a parte ferroviária. O trabalho inicia-se com o enquadramento conceptual geral da envolvente da obra de arte, seguidamente com apresentação da evolução histórica ao longo do tempo das pontes de tirantes, e à apresentação de algumas pontes rodoferroviárias de tirantes. É realizada uma análise preliminar, onde se estudam as restrições, as condicionantes, o local de implantação, e o sistema da configuração geométrica a adotar na conceção estrutural. São descritos todos os tipos de materiais, equipamentos a utilizar, bem como as suas características mecânicas necessárias para o cálculo estrutural. A quantificação das ações e das combinações de cálculo efetuaram-se de acordo com as normas em vigor nacionais e europeias, designadamente os Eurocódigos das várias especialidades e o Regulamento de Segurança e Ações para Estruturas de Edifícios e Pontes. Efetuou-se um pré-dimensionamento e uma otimização de vários sistemas estruturais possíveis de todos os elementos estruturais, tendo em conta variáveis de estudo como a economia e a resistência estrutural das secções, por forma a chegar à solução final. A estrutura foi discretizada e analisada num modelo estático tridimensional num programa de cálculo automático. A análise de resultados foi efetuada longitudinalmente para a verificação dos Estados Limites Últimos e Estados Limites de Utilização dos elementos estruturais que constituem a ponte. Foi ainda efetuada uma estimativa orçamental da ponte no rio Lima na cidade de Viana do Castelo.

Development of electrospun Ion jelly fibers® for drug delivery

Dissertação para obtenção do Grau de Mestre em Biotecnologia

Determinação das propriedades mecânicas à tração de adesivos estruturais frágeis e dúcteis

A crescente evolução na tecnologia das juntas coladas conferiu um potencial atractivo às ligações adesivas, com aplicações nas mais variadas indústrias. Isto deve-se não só aos aspetos económicos, tais como a melhoria da cadência de produção mas também à resistência mecânica que estas proporcionam. A possibilidade de ligar facilmente materiais distintos, a distribuição mais uniforme das tensões, a melhor resistência à fadiga e a elevada capacidade de amortecimento de vibrações estão entre as principais vantagens da utilização deste tipo de ligação. Estas propriedades transformam as juntas coladas numas das preferidas no momento de seleção de meios de união. O trabalho desenvolvido nesta dissertação enquadra-se no âmbito das ligações adesivas e tem como principais objetivos a produção de uma ferramenta para a produção de provetes de adesivo, assim como a determinação das propriedades mecânicas à tração dos mesmos para testar o desempenho do molde fabricado. Para tal, utilizou-se um adesivo frágil (Araldite® AV 138), um dúctil (Araldite® 2015) e um muito dúctil (SikaForce® 7888). Paralelamente é selecionado o método mais adequado na obtenção destes provetes, designadamente escolhendo entre a moldação em molde aberto e a injeção em molde fechado. Com vista à obtenção dos provetes, foi projetado e construído um molde em aço. Recorrendo à máquina de tração Shimadzu AG – X 100, realizaram-se os respetivos ensaios de tração, para a determinação de todas as propriedades mecânicas dos adesivos. Para efeitos de comparação de resultados foram utilizados dois tipos de extensómetros, um mecânico e um ótico. Os resultados experimentais permitiram observar que a presença de vazios afetou especialmente a deformação de rotura e a tensão de rotura. Detetaram-se pequenas discordâncias, comparativamente com os estudos publicados, de algumas características mecânicas obtidas dos diversos adesivos utilizados. Constatou-se também um ligeiro desfasamento entre os valores adquiridos com os dois tipos de extensómetros utilizados.

Coarctação Isolada da Aorta: Experiência em 100 Doentes Consecutivos

INTRODUCTION: Coarctation of the aorta (CoA) is a stenosis usually located in the descending aorta. Treatment consists of surgical or percutaneous removal of the obstruction and presents excellent immediate results but significant residual problems often persist. OBJECTIVES: To describe the presentation, treatment and long-term evolution of a population of 100 unselected consecutive patients with isolated CoA in a single pediatric cardiology center. METHODS: This was a retrospective study of all patients with isolated CoA treated during4 the last 21 years (1987-2008). RESULTS: The patients (n=100, 68.3% male) were diagnosed at a median age of 94 days (1 day to 16 years). The clinical presentation differed between patients aged less or more than one year, the former presenting with heart failure and the latter being asymptomatic with evidence of hypertension (88 and 63%, respectively; p < 0.01). Treatment, a median of 8 days after diagnosis, was surgical in 79 cases (20 end-to-end anastomosis, 31 subclavian flap, 28 patch) and percutaneous in the remaining 21 (15 balloon angioplasty, 6 with stenting). The mean age of surgical patients was younger than in those treated percutaneously (3.4 vs. 7.5 years; p < 0.01). Immediate mortality was 2% and occurred in the surgical group. There was no late mortality, in a mean follow-up of 7.2 +/- 5.4 years. Recoarctation occurred in 8 patients (6 surgical, 2 percutaneous). There are 46 patients who currently have hypertension (19 at rest, 27 with effort), their median age at diagnosis being older than the others (23 vs. 995 days; p < 0.01). CONCLUSIONS: Isolated CoA has an excellent short-term prognosis but a significant incidence of long-term complications, and should thus no longer be seen as a simple obstruction in the descending aorta, but rather as a complex pathology that requires careful follow-up after treatment. Its potentially insidious presentation requires a high level of clinical suspicion, femoral pulse palpation during physical examination of newborns and older children being particularly important. Delay in treatment has an impact on late morbidity and mortality. Taking into account the data currently available on late and immediate results, the final choice of therapeutic technique depends on the patient's age, associated lesions and the experience of the medical-surgical team. Hypertension should be closely monitored in the follow-up of these patients, as well as its risk factors and complications.

Cirurgias de Derivação do Ventrículo Pulmonar

Cavopulmonary connections have been extensively used in the palliation of complex forms of congenital heart disease requiring some form of right heart bypass. We examine the mid term outcomes of pulmonary ventricle bypass operations in a single institution and performed by the same surgical team. POPULATION: Between March 1999 and April 2006, 62 patients underwent pulmonary ventricle bypass operations: bidirectional cavopulmonary anastomosis (Glenn procedure), total cavopulmonary connections (Fontan procedure) and one and a half ventricle correction in two cases. Age at operation averaged three years (range: 0.42-25 years) for the Glenn procedure and seven years (range: 3-14 years) for the Fontan procedure. There were 36 male patients (58%) and 26 female patients (42%). The most common indication for surgery was the single ventricle defect, present in 66% of patients. Associated lesions included: transposition of the great arteries in 16 patients (35.6%), bilateral superior vena cava in four patients (8.9%), situs ambigus in five patients (11%), situs inversus in another patient (2.2%), Ebstein disease in one patient (2.2) and coronary fistula in another patient (2.2%). Sub-aortic stenosis was present in one patient (2.2%). Palliative surgery was performed in all, but three patients (5%), before the Fontan procedure. RESULTS: Thirty two patients underwent bidirectional cavopulmonary anastomosis and thirty patients underwent cavopulmonary connections, total or 2nd stage. Mean cardiopulmonary bypass times were 50.6+/-21.9 minutes for the Glenn procedure and 88.5+/-26.3 minutes for the Fontan procedure. There was no intra-operative mortality, but two patients (3.2% (died in the first month after surgery; one due to failure of the Glenn circuit and sepsis and the other due to a low cardiac output syndrome and multi-organ dysfunction. Mean ventilation time was 5.2+/-1.7 hours for the Glenn operation and 6.2+/-3.2 hours for the Fontan operation. The mean length of stay in ICU was 3.4+/-2.8 days for patients undergoing the Glenn operation and 4.6+/-3.1 days for patients undergoing the Fontan operation and the mean length of hospital stay was 10.6+/-5.8 days for the Glenn operation and 19.1+/-12.6 days for the Fontan operation respectively. The mean follow up time was 4+/-2.1 years (minimum 0 years and maximum seven years), most patients being in NYHA class I. Epicardiac pacemakers were implanted in three patients due to arrhythmias. Two re-operations (6.7%) were needed, both in the same patient, after the Fontan procedure, this patient eventually died a few years after surgery. CONCLUSIONS: The immediate and mid term outcomes of pulmonary ventricle bypass operations can have excellent results. From our point of view there has been an improvement, namely in the use of the extracardiac conduit technique in the 2nd stage of the Fontan operation.

Origem Anómala da Artéria Coronária Esquerda a Partir da Artéria Pulmonar

OBJECTIVE: To assess the frequency and severity of the anomalous origin of the left coronary artery (ALCA) from the pulmonary artery (PA). DESIGN OF THE STUDY: Prospective study of case series between March 1991 and December 1994. SETTING: Referral-based Paediatric Cardiology Department of a Tertiary Care Center. PATIENTS AND METHODS: Five consecutive patients (pts) with anomalous origin of the LCA from the PA; there were three infants aged 4 months and two children one 8 year and one 9 year old. There were three girls and two boys. All pts had clinical and 2D-echo and Doppler investigation prior to cardiac catheterization (CC). Indication for CC was based in the association of symptoms and signs of myocarditis or dilated cardiomyopathy of acute or subacute onset and electrocardiographic (ECG) signs of ischemia in infants. In older patients (pts) diagnosis was suspected mainly from ECG. During CC in all pts, aortograms and when necessary selective coronary angiograms were performed. Surgical correction was performed in all children. In two pts stress exercise ECG and stress Thallium studies before and after surgery were performed. RESULTS: two pts had "adult" an three had "infantile" type of ALCA from the PA. CC was performed and diagnosis was confirmed at surgery in all cases. In one child, correct diagnosis was made by ECO prior to CC and in one case LCA to PA fistula was suspected on Colour-Doppler study. No complications were attributed to CC. Several types of surgery were performed: reimplantation of the ALCA from the PA to the aorta (three pts); tunnel connection of the aorta to the ALCA via the PA (one pt) and left internal mammary to LCA anastomosis (one pt). Two infants died intraoperatively due to extensive myocardial infarction and poor left ventricular function. All the three survivors are asymptomatic after a mean follow up of 34 months. Two oldest pts are currently in New York Heart Association functional class I with normal ECG and improved myocardial perfusion on Thallium scan despite almost total occlusion of LCA at the site of implantation in the aorta as diagnosed on coronary angiogram. CONCLUSIONS: ALCA from PA is associated with major morbidity and mortality. Diagnosis should be suspected in pts with unexplained myocardial ischemia on ECG and even more if it is associated to clinical signs of dilated cardiomyopathy or myocarditis. Careful assessment on ECO and pulsed Doppler and colour flow mapping should make the diagnosis in most cases. Although surgery can be performed based only on ECO diagnosis, we strongly advise for angiography in all cases as in our experience there are false negative diagnosis by ECO. Preoperative Thallium studies can be useful for the selection of the type of surgery as pts with very little viable myocardium will not survive the establishment of a direct systemic to coronary blood flow and may be candidates for heart transplantation.

The Turbocharged Becker Flap: a Simple Variation that Allows Coverage of Most of the Dorsum of the Hand

Cover of medium and large defects of the dorsum of the hand remains a substantial surgical challenge that often requires free tissue transfer. We report the case of a 28-year-old male who presented with necrosis of most of the dorsum of his dominant hand after an iatrogenic injury. A large Becker flap was raised to cover the entire defect. However, venous insufficiency was noted intraoperatively. The flap was turbocharged by performing a venous anastomosis between the flap and the recipient site, resulting in complete survival of the flap. The authors conclude that the turbocharged Becker flap can be a good alternative for expeditiously covering large defects of the dorsum of the hand without having to resort to free tissue transfer.

Results of Endovascular Procedures Performed in Dysfunctional Arteriovenous Accesses for Haemodialysis

Aim. Percutaneous endovascular procedures have become the standard treatment of arteriovenous fistulae and graft stenosis. This study evaluates the immediate results of angiographic procedures performed by nephrologists in patients with dysfunctional arteriovenous fistulae and arteriovenous graft stenosis. Patients and Methods. A retrospective analysis was performed on patients referred to the three Interventional Nephrology units between April and June, 2010. Clinical data were recorded. Results. A total of 113 procedures were performed: 59 in arteriovenous fistulae and 54 in arteriovenous graft stenosis. The main reasons for referral were increased venous pressure (21%), limb oedema (21%) and decreased intra-access flow (20%). Stenoses were detected in 85% of the procedures, mostly in patients with arteriovenous graft stenosis (56%). The main locations of stenosis were the outflow vein (cephalic/basilic) in arteriovenous fistulae (34%) and venous anastomosis in arteriovenous graft stenosis(48%). Angioplasty was performed in 73% of procedures where stenoses were detected. The immediate success rate was 91% for arteriovenous fistulae and 83% for arteriovenous graft stenosis. Partial success was obtained in 11% of angiographies. The complication rate was 7%. Conclusions. Physical examination findings led, in at least half the cases, to angiography referral and enabled the diagnosis and treatment of stenoses. For this reason, we advocate that this tool should be included in any vascular access monitoring programme. Our results support the safety of these procedures performed by nephrologists and their efficacy in the recovery of dysfunctional arteriovenous fistulae and arteriovenous graft stenosis.

Experimental characterization of the out-of-plane performance of regular stone masonry walls, including test setups and axial load influence

Stone masonry is one of the oldest and most worldwide used building techniques. Nevertheless, the structural response of masonry structures is complex and the effective knowledge about their mechanical behaviour is still limited. This fact is particularly notorious when dealing with the description of their out-of-plane behaviour under horizontal loadings, as is the case of the earthquake action. In this context, this paper describes an experimental program, conducted in laboratory environment, aiming at characterizing the out-of-plane behaviour of traditional unreinforced stone masonry walls. In the scope of this campaign, six full-scale sacco stone masonry specimens were fully characterised regarding their most important mechanic, geometric and dynamic features and were tested resorting to two different loading techniques under three distinct vertical pre-compression states; three of the specimens were subjected to an out-of-plane surface load by means of a system of airbags and the remaining were subjected to an out-of-plane horizontal line-load at the top. From the experiments it was possible to observe that both test setups were able to globally mobilize the out-of-plane response of the walls, which presented substantial displacement capacity, with ratios of ultimate displacement to the wall thickness ranging between 26 and 45 %, as well as good energy dissipation capacity. Finally, very interesting results were also obtained from a simple analytical model used herein to compute a set of experimental-based ratios, namely between the maximum stability displacement and the wall thickness for which a mean value of about 60 % was found.

Produção Sustentável em BT- Análise de Características de Contadores Inteligentes

A crescente necessidade de reduzir a dependência energética e a emissão de gases de efeito de estufa levou à adoção de uma série de políticas a nível europeu com vista a aumentar a eficiência energética e nível de controlo de equipamentos, reduzir o consumo e aumentar a percentagem de energia produzida a partir de fontes renováveis. Estas medidas levaram ao desenvolvimento de duas situações críticas para o setor elétrico: a substituição das cargas lineares tradicionais, pouco eficientes, por cargas não-lineares mais eficientes e o aparecimento da produção distribuída de energia a partir de fontes renováveis. Embora apresentem vantagens bem documentadas, ambas as situações podem afetar negativamente a qualidade de energia elétrica na rede de distribuição, principalmente na rede de baixa tensão onde é feita a ligação com a maior parte dos clientes e onde se encontram as cargas não-lineares e a ligação às fontes de energia descentralizadas. Isto significa que a monitorização da qualidade de energia tem, atualmente, uma importância acrescida devido aos custos relacionados com perdas inerentes à falta de qualidade de energia elétrica na rede e à necessidade de verificar que determinados parâmetros relacionados com a qualidade de energia elétrica se encontram dentro dos limites previstos nas normas e nos contratos com clientes de forma a evitar disputas ou reclamações. Neste sentido, a rede de distribuição tem vindo a sofrer alterações a nível das subestações e dos postos de transformação que visam aumentar a visibilidade da qualidade de energia na rede em tempo real. No entanto, estas medidas só permitem monitorizar a qualidade de energia até aos postos de transformação de média para baixa tensão, não revelando o estado real da qualidade de energia nos pontos de entrega ao cliente. A monitorização nestes pontos é feita periodicamente e não em tempo real, ficando aquém do necessário para assegurar a deteção correta de problemas de qualidade de energia no lado do consumidor. De facto, a metodologia de monitorização utilizada atualmente envolve o envio de técnicos ao local onde surgiu uma reclamação ou a um ponto de medição previsto para instalar um analisador de energia que permanece na instalação durante um determinado período de tempo. Este tipo de monitorização à posteriori impossibilita desde logo a deteção do problema de qualidade de energia que levou à reclamação, caso não se trate de um problema contínuo. Na melhor situação, o aparelho poderá detetar uma réplica do evento, mas a larga percentagem anomalias ficam fora deste processo por serem extemporâneas. De facto, para detetar o evento que deu origem ao problema é necessário monitorizar permanentemente a qualidade de energia. No entanto este método de monitorização implica a instalação permanente de equipamentos e não é viável do ponto de vista das empresas de distribuição de energia já que os equipamentos têm custos demasiado elevados e implicam a necessidade de espaços maiores nos pontos de entrega para conter os equipamentos e o contador elétrico. Uma alternativa possível que pode tornar viável a monitorização permanente da qualidade de energia consiste na introdução de uma funcionalidade de monitorização nos contadores de energia de determinados pontos da rede de distribuição. Os contadores são obrigatórios em todas as instalações ligadas à rede, para efeitos de faturação. Tradicionalmente estes contadores são eletromecânicos e recentemente começaram a ser substituídos por contadores inteligentes (smart meters), de natureza eletrónica, que para além de fazer a contagem de energia permitem a recolha de informação sobre outros parâmetros e aplicação de uma serie de funcionalidades pelo operador de rede de distribuição devido às suas capacidades de comunicação. A reutilização deste equipamento com finalidade de analisar a qualidade da energia junto dos pontos de entrega surge assim como uma forma privilegiada dado que se trata essencialmente de explorar algumas das suas características adicionais. Este trabalho tem como objetivo analisar a possibilidade descrita de monitorizar a qualidade de energia elétrica de forma permanente no ponto de entrega ao cliente através da utilização do contador elétrico do mesmo e elaborar um conjunto de requisitos para o contador tendo em conta a normalização aplicável, as características dos equipamentos utilizados atualmente pelo operador de rede e as necessidades do sistema elétrico relativamente à monitorização de qualidade de energia.

The Oncological and Functional Risks of the Organ Preservation Experimental Treatment Approach

We increasingly face conservative surgery for rectal cancer and even the so called ‘wait and see’ approach, as far as 10–20% patients can reach a complete pathological response at the time of surgery. But what can we say to our patients about risks? Standard surgery with mesorectal excision gives a <2% local recurrence with a post operative death rate of 2–8% (may reach 30% at 6 months in those over 85), but low AR has some deterioration in bowel function and in low cancer a permanent stoma may be required. Also a long-term impact on urinary and sexual function is possible. Distant metastasis rate seem to be identical in the standard and conservative approach. It is difficult to evaluate conservative approach because a not clear standardization of surgery for low rectal cancer. Rullier et al tried to clarify, and they found identical results for recurrence (5–9%), disease free survival (70%) at 5y for coloanal anastomosis and intersphinteric resection. Other series have found local recurrence higher than with standard approach and functional results may be worse and, in some situations, salvage therapy is compromised or has more complications. In this context, functional outcomes are very important but most studies are incomplete in measuring bowel function in the context of conservative approach. In 2005 Temple et al made a survey of 122/184 patient after sphinter preserving surgery and found a 96.9% of incomplete evacuation, 94.4% clustering, 93.2% food affecting frequency, 91.8% gas incontinence and proposed a systematic evaluation with a specific questionnaire. In which concerns ‘Wait and see’ approach for complete clinical responders, it was first advocated by Habr Gama for tumors up to 7cm, with a low locoregional failure of 4.6%, 5y overall survival 96%, 72% for disease free survival; one fifth of patients failed in the first year; a Dutch trial had identical results but others had worse recurrence rates; in other series 25% of patients could not be salvaged even with APR; 30% have subsequent metastatic disease what seems equal for ‘wait and see’ and operated patients. In a recent review Glynne Jones considers that all the evaluated ‘wait and see’ studies are heterogeneous in staging, inclusion criteria, design and follow up after chemoradiation and that there is the suggestion that patients who progress while under observation fare worse than those resected. He proposes long-term observational studies with more uniform inclusion criteria. We are now facing a moment where we may be more aggressive in early cancer and neoadjuvant treatment to be more conservative in the subsequent treatment but we need a better stratification of patients, better evaluation of results and more clear prognostic markers.

Hepatic Artery Thrombosis in Live Liver Donor Transplantation: How to Solve - a Case Report

The decrease in the number of cadaveric donors has proved a limiting factor in the number of liver transplants, leading to the death of many patients on the waiting list. The living donor liver transplantation is an option that allows, in selected cases, increase the number of donors. One of the most serious complications in liver transplantation is hepatic artery thrombosis, in the past considered potentially fatal without urgent re-transplantation. A white male patient, 48 years old, diagnosed with hepatocellular carcinoma in chronic liver failure caused by hepatitis B virus, underwent living donor liver transplantation (right lobe). Doppler echocardiography performed in the immediate postoperative period did not identify arterial flow in the right branch, having been confirmed thrombosis of the right hepatic artery in CT angiography. Urgent re-laparotomy was performed, which consisted of thrombectomy and re-anastomosis of the hepatic artery with segmental splenic artery allograft interposition. The patient started anticoagulation and antiplatelet therapy with acetylsalicylic acid. Serial evaluation with Doppler echocardiography showed hepatic artery patency. At present, the patient is asymptomatic. One of the most devastating complications in liver transplantation, and particularly in living liver donor, is thrombosis of the hepatic artery; thus, early diagnosis and treatment is vital. The rapid intervention for revascularization of the graft avoids irreversible ischemia of the bile ducts and hepatic parenchyma, thus avoiding the need for re-transplantation.

Lime-metakaolin mortars for historical buildings repair: study of the hardening reaction

International Conference Durable Structures: from construction to rehabilitation. Lisbon, LNEC, 31 May-1 June 2012