Thermal effects in the evolution of initially layered mantle material

A simplified model for anisotropic mantle convection based on a novel class of rheologies, originally developed for folding instabilities in multilayered rock (MUHLHAUS et al., 2002), is extended ¨ through the introduction of a thermal anisotropy dependent on the local layering. To examine the effect of the thermal anisotropy on the evolution of mantle material, a parallel implementation of this model was undertaken using the Escript modelling toolkit and the Finley finite-element computational kernel (DAVIES et al., 2004). For the cases studied, there appears too little if any effect. For comparative purposes, the effects of anisotropic shear viscosity and the introduced thermal anisotropy are also presented. These results contribute to the characterization of viscous anisotropic mantle convection subject to variation in thermal conductivities and shear viscosities.

Cost-benefit analysis of alternative forms of hedgerow intercropping in the Philippine uplands

Considerable resources have been expended promoting hedgerow intercropping with shrub legumes to farmers in the Philippine uplands. Despite the resources committed to research and extension, persistent adoption by farmers has been limited to low cost versions of the technology including natural vegetation and grass strips. In this paper, cost-benefit analysis is used to compare the economic returns from traditional open-field maize farming with returns from intercropping maize between leguminous shrub hedgerows, natural vegetation strips and grass strips. An erosion/productivity model, Soil Changes Under Agroforestry, was used to predict the effect of erosion on maize yields. Key informant surveys with experienced maize farmers were used to derive production budgets for the alternative farming methods. The economic incentives revealed by the cost-benefit analysis help to explain the adoption of maize farming methods in the Philippine uplands. Open-field farming without hedgerows has been by far the most popular method of maize production, often with two or more fields cropped in rotation. There is little persistent adoption of hedgerow intercropping with shrub legumes because sustained maize yields are not realised rapidly enough to compensate farmers for establishment and maintenance costs. Natural vegetation and grass strips are more attractive to farmers because of lower establishment costs, and provide intermediate steps to adoption. Rural finance, commodity pricing and agrarian reform policies influence the incentives for maize farmers in the Philippine uplands to adopt and maintain hedgerow intercropping.

Cost functions and duality for stochastic technologies

Cost functions dual to stochastic production technologies are derived and their properties are discussed. These cost functions are shown to be consistent with expected-utility maximization without placing serious structural restrictions on the underlying technology.

On uniquely determining cell-wall material properties with the compression experiment

A finite element model (FEM) of the cell-compression experiment has been developed in dimensionless form to extract the fundamental cell-wall-material properties (i.e. the constitutive equation and its parameters) from experiment force-displacement data. The FEM simulates the compression of a thin-walled, liquid-filled sphere between two flat surfaces. The cell-wall was taken to be permeable and the FEM therefore accounts for volume loss during compression. Previous models assume an impermeable wall and hence a conserved cell volume during compression. A parametric study was conducted for structural parameters representative of yeast. It was shown that the common approach of assuming reasonable values for unmeasured parameters (e.g. cell-wall thickness, initial radial stretch) can give rise to nonunique solutions for both the form and constants in the cell-wall constitutive relationship. Similarly, measurement errors can also lead to an incorrectly defined cell-wall constitutive relationship. Unique determination of the fundamental wall properties by cell compression requires accurate and precise measurement of a minimum set of parameters (initial cell radius, initial cell-wall thickness, and the volume loss during compression). In the absence of such measurements the derived constitutive relationship may be in considerable error, and should be evaluated against its ability to predict the outcome of other mechanical experiments. (C) 1998 Elsevier Science Ltd. All rights reserved.

The cost of life expectancy and the implicit social valuation of life

A new method of estimating the economic value of life is proposed. Using cross-country data, an equation is estimated to explain life expectancy as a function of real consumption of goods and services. The associated cost function for life expectancy in terms of the prices of specific goods and services is used to estimate the cost of a reduction in age-specific mortality rates sufficient to save the life of one person. The cost of saving a life in OECD countries is as much as 1000 times that in the poorest countries. Ethical implications are discussed.

Cost-effectiveness analysis of humanitarian relief interventions: visceral leishmaniasis treatment in the Sudan

Spending by aid agencies on emergencies has quadrupled over the last decade, to over US$ 6 billion. To date, cost-effectiveness has seldom been considered in the prioritization and evaluation of emergency interventions. The sheer volume of resources spent on humanitarian aid and the chronicity of many humanitarian interventions call for more attention to be paid to the issue of 'value for money'. In this paper we present data from a major humanitarian crisis, an epidemic of visceral leishmaniasis (VL) in war-torn Sudan. The special circumstances provided us, in retrospect, with unusually accurate data on excess mortality, costs of the intervention and its effects, thus allowing us to express cost-effectiveness as the cost per Disability Adjusted Life Year (DALY) averted. The cost-effectiveness ratio, of US$ 18.40 per DALY (uncertainty range between US$ 13.53 and US$ 27.63), places the treatment of VL in Sudan among health interventions considered 'very flood value for money' (interventions of less than US$ 25 per DALY). We discuss the usefulness of this analysis to the internal management of the VL programme, the procurement of funds for the programme, and more generally, to priority setting in humanitarian relief interventions. We feel that in evaluations of emergency interventions attempts could be made more often to perform cost-effectiveness analyses, including the use of DALYs, provided that the outcomes of these analyses are seen in the broad context of the emergency situation and its consequences on the affected population. This paper provides a first contribution to what is hoped to become an international database of cost-effectiveness studies of health outcome such as the DALY.

Life-cycle preferences over consumption and health: when is cost-effectiveness analysis equivalent to cost-benefit analysis?

This paper studies life-cycle preferences over consumption and health status. We show that cost-effectiveness analysis is consistent with cost-benefit analysis if the Lifetime utility function is additive over time, multiplicative in the utility of consumption and the utility of health status, and if the utility of consumption is constant over time. We derive the conditions under which the lifetime utility function takes this form, both under expected utility theory and under rank-dependent utility theory, which is currently the most important nonexpected utility theory. If cost-effectiveness analysis is consistent with cost-benefit analysis, it is possible to derive tractable expressions for the willingness to pay for quality-adjusted life-years (QALYs). The willingness to pay for QALYs depends on wealth, remaining life expectancy, health status, and the possibilities for intertemporal substitution of consumption. (C) 1999 Elsevier Science B.V. All rights reserved.

Wall material properties of yeast cells. Part II. Analysis

In the preceding paper (Part I) force-deformation data were measured with the compression experiment in conjunction with the initial radial stretch ratio and the initial wall-thickness to cell-radius ratio for baker's yeast (Saccharomyces cerevisiae). In this paper, these data have been analysed with the mechanical model of Smith et al. (Smith, Moxham & Middelberg (1998) Chemical Engineering Science, 53, 3913-3922) with the wall constitutive behaviour defined a priori as incompressible and linear-elastic. This analysis determined the mean Young's modulus ((E) over bar), mean maximum von Mises stress-at-failure (<(sigma)over bar>(VM,f)) and mean maximum von Mises strain-at failure (<(epsilon)over bar>(VM,f)) to be (E) over bar = 150 +/- 15 MPa, <(sigma)over bar>(VM,f) = 70 +/- 4 MPa and <(epsilon)over bar>(VM,f) = 0.75 +/- 0.08, respectively. The mean Young's modulus was not dependent (P greater than or equal to 0.05) on external osmotic pressure (0-0.8 MPa) nor compression rate (1.03-7.68 mu m/s) suggesting the incompressible linear-elastic relationship is representative of the actual cell-wall constitutive behaviour. Hydraulic conductivities were also determined and were comparable to other similar cell types (0-2.5 mu m/MPa s). The hydraulic conductivity distribution was not dependent on external osmotic pressure (0-0.8 MPa) nor compression rate (1.03-7.68 mu m/s) suggesting inclusion of cell-wall permeability in the mechanical model is justified. <(epsilon)over bar>(VM,f) was independent of cell diameter and to a first-approximation unaffected (P greater than or equal to 0.01) by external osmotic pressure and compression rate, thus providing a reasonable failure criterion. This criterion states that the cell-wall material will break when the strain exceeds <(epsilon)over bar>(VM,f) = 0.75 +/- 0.08. Variability in overall cell strength during compression was shown to be primarily due to biological variability in the maximum von Mises strain-at-failure. These data represent the first estimates of cell-wall material properties for yeast and the first fundamental analysis of cell-compression data. They are essential for describing cell-disruption at the fundamental level of fluid-cell interactions in general bioprocesses. They also provide valuable new measurements for yeast-cell physiologists. (C) 2000 Elsevier Science Ltd. All rights reserved.

How thick is thick? Multicenter study of the rheological and material property characteristics of mealtime fluids and videofluoroscopy fluids

Objective rheological assessment of fluids given to dysphagic patients at mealtime and during videofluoroscopy was carried out using a multicenter format. Thin, quarter-thick, half-thick and full-thick fluids were examined for the degree of correlation between mealtime fluids and their allegedly matched videofluoroscopy counterparts. The study was carried out to determine whether perceived subjective differences between mealtime fluids and videofluoroscopy fluids could be quantified using the rheological parameters of viscosity, density, and yield stress. The results showed poor correlation between mealtime fluids and videofluoroscopy fluids over all parameters. In general, the videofluoroscopy fluids were more viscous, more dense, and showed higher yield stress values than their mealtime counterparts. Given these results, it is reasonable to assume that the fluids used during videofluoroscopy do not provide an accurate indication of swallowing ability at mealtime. Therefore, it is suggested that clinicians use objective methods to theologically match videofluoroscopy fluids to mealtime fluids.

Characterization of the structural and surface properties of chemically modified MCM-41 material

Mesoporous Mobil catalytic materials of number 41 (MCM-41) silica was chemically modified using both inorganic and organic precursors and characterized using the techniques, XRD, XPS, MAS NMR, FTIR, W-Vis, and physical adsorption of nitrogen, hydrocarbons (hexane, benzene, acetone, and methanol) and water vapor. Modification using organic reagents was found to result in a significant loss in porosity and a shape change of surface properties (increased hydrophobicity and decreased acidity). With inorganic modifying reagents, the decrease in porosity was also observed while the surface properties were not significantly altered as reflected by the adsorption isotherms of organics and water vapors. Chemical modifications can greatly improve the hydrothermal stability of MCM-41 material because of the enhanced surface hydrophobicity (with organic modifiers) or increased pore wall thickness (with inorganic modifiers). (C) 2000 Elsevier Science B.V. All rights reserved.

Estimating the cost of contact for non-resident parents: A budget standards approach

Most Western countries have, for some time, provided income support and/or taxation relief to parents with children in their care. The significant amount of research into the costs of children to couple and sole parent households has been important in assessing and developing family support policies. Changing societal expectations about the level of involvement of fathers in child rearing activities has highlighted the need to understand the costs facing usually male non-resident parents in having contact with their children. The budget standards methodology is used in this paper to estimate the costs for non-resident parents exercising regular contact with their children. Costs of contact are found to be high. For contact with one child for 20 per cent of the year, costs of contact represent about 40 per cent of the costs of that same child in an intact couple household with a medium income and more than half of the costs of that child in a household with low income. Household infrastructure and transportation is the reason for high costs. One implication of this finding is that the total cost of children substantially increases when parents separate. The article discusses some policy implications of these findings. This research is of relevance to social security, taxation, family law and child support policies and administration.