Wastewater usage in urban and peri-urban agricultural production systems: scenarios from India

The role urban and peri-urban agriculture (UPA) plays in reducing urban poverty and ensuring environmental sustainability was recognized by the Millennium Development Goals (MGDs). India is the world’s largest democratic nation with a population of 1.2 billion. The rapid urbanization and high proportion of people below the poverty line along with higher migration to urban areas make India vulnerable to food crisis and urbanization of poverty. Ensuring jobs and food security among urban poor is a major challenge in India. The role of UPA can be well explained and understood in this context. This paper focuses on the current situation of UPA production in India with special attention to wastewater irrigation. This question is being posed about the various human health risks from wastewater irrigation which are faced by farmers and labourers, and, secondly by consumers. The possible health hazards involve microbial pathogens as well as helminth (intestinal parasites). Based on primary and secondary data, this paper attempts to confirm that UPA is one of the best options to address increasing urban food demand and can serve to complement rural supply chains and reduce ecological food prints in India. “Good practice urban and peri-urban agriculture” necessitates an integrated approach with suitable risk reduction mechanisms to improve the efficiency and safety of UPA production.

Site Safety and Food Affect Movements of Semipalmated Sandpipers (Calidris pusilla) Migrating Through the Upper Bay of Fundy

The upper Bay of Fundy is a critical stopover site for Semipalmated Sandpipers (Calidris pusilla) during their fall migration. However, little is known about factors that influence selection of feeding and roosting sites by these birds, or the extent to which birds move between different sites during their time in the region. Using radio-telemetry, we studied movement patterns, examined habitat use, and tested hypotheses associated with factors influencing foraging and roost-site selection. Movements of radio-tagged sandpipers were tracked in the upper Bay of Fundy in August 2004 and 2005. In 2004, sandpipers from the Minas Basin, Nova Scotia and Chignecto Bay, New Brunswick and Nova Scotia, were tracked, and in 2005, sandpipers were tracked only in Chignecto Bay. Sandpipers were highly mobile in both the Minas Basin 2004 and Chignecto Bay 2005, making daily movements of up to 20 km between foraging and roosting sites, although very little movement was detected in Chignecto Bay in 2004. Migrating sandpipers appeared to select foraging sites based on relative safety, as measured by distance to cover, provided that these sites offered an adequate food supply. Similarly, roosting sandpipers preferred sites that were far from nearby trees that might offer cover to predators. This preference for safe sites became more apparent later in their stay in the Bay of Fundy, when birds were heavier and, therefore, possibly more vulnerable to predation. Semipalmated Sandpipers appear to be flexible during their time in the upper Bay of Fundy, displaying year-to-year and site-to-site variability in movement and mudflat usage. Therefore, multiple, synchronized population counts should be conducted at known roost sites in order to more accurately estimate Semipalmated Sandpiper abundance in this region. Furthermore, in a highly dynamic system where food can be variable, landscape features such as distance to cover may be important factors to consider when selecting candidate sites for shorebird conservation measures.

Monitoring of hydrogen sulfide via substrate-integrated hollow waveguide mid-infrared sensors in real-time

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

The use of Ground Penetrating Radar and alternative geophysical techniques for assessing embankments and dykes safety

The research is part of a survey for the detection of the hydraulic and geotechnical conditions of river embankments funded by the Reno River Basin Regional Technical Service of the Region Emilia-Romagna. The hydraulic safety of the Reno River, one of the main rivers in North-Eastern Italy, is indeed of primary importance to the Emilia-Romagna regional administration. The large longitudinal extent of the banks (several hundreds of kilometres) has placed great interest in non-destructive geophysical methods, which, compared to other methods such as drilling, allow for the faster and often less expensive acquisition of high-resolution data. The present work aims to experience the Ground Penetrating Radar (GPR) for the detection of local non-homogeneities (mainly stratigraphic contacts, cavities and conduits) inside the Reno River and its tributaries embankments, taking into account supplementary data collected with traditional destructive tests (boreholes, cone penetration tests etc.). A comparison with non-destructive methodologies likewise electric resistivity tomography (ERT), Multi-channels Analysis of Surface Waves (MASW), FDEM induction, was also carried out in order to verify the usability of GPR and to provide integration of various geophysical methods in the process of regular maintenance and check of the embankments condition. The first part of this thesis is dedicated to the explanation of the state of art concerning the geographic, geomorphologic and geotechnical characteristics of Reno River and its tributaries embankments, as well as the description of some geophysical applications provided on embankments belonging to European and North-American Rivers, which were used as bibliographic basis for this thesis realisation. The second part is an overview of the geophysical methods that were employed for this research, (with a particular attention to the GPR), reporting also their theoretical basis and a deepening of some techniques of the geophysical data analysis and representation, when applied to river embankments. The successive chapters, following the main scope of this research that is to highlight advantages and drawbacks in the use of Ground Penetrating Radar applied to Reno River and its tributaries embankments, show the results obtained analyzing different cases that could yield the formation of weakness zones, which successively lead to the embankment failure. As advantages, a considerable velocity of acquisition and a spatial resolution of the obtained data, incomparable with respect to other methodologies, were recorded. With regard to the drawbacks, some factors, related to the attenuation losses of wave propagation, due to different content in clay, silt, and sand, as well as surface effects have significantly limited the correlation between GPR profiles and geotechnical information and therefore compromised the embankment safety assessment. Recapitulating, the Ground Penetrating Radar could represent a suitable tool for checking up river dike conditions, but its use has significantly limited by geometric and geotechnical characteristics of the Reno River and its tributaries levees. As a matter of facts, only the shallower part of the embankment was investigate, achieving also information just related to changes in electrical properties, without any numerical measurement. Furthermore, GPR application is ineffective for a preliminary assessment of embankment safety conditions, while for detailed campaigns at shallow depth, which aims to achieve immediate results with optimal precision, its usage is totally recommended. The cases where multidisciplinary approach was tested, reveal an optimal interconnection of the various geophysical methodologies employed, producing qualitative results concerning the preliminary phase (FDEM), assuring quantitative and high confidential description of the subsoil (ERT) and finally, providing fast and highly detailed analysis (GPR). Trying to furnish some recommendations for future researches, the simultaneous exploitation of many geophysical devices to assess safety conditions of river embankments is absolutely suggested, especially to face reliable flood event, when the entire extension of the embankments themselves must be investigated.

Export Supply Chain Organization and Food Safety and Quality Standards: a case study of the Moroccan Fruit and Vegetable Sector

Agri-food supply chains extend beyond national boundaries, partially facilitated by a policy environment that encourages more liberal international trade. Rising concentration within the downstream sector has driven a shift towards “buyer-driven” global value chains (GVCs) extending internationally with global sourcing and the emergence of multinational key economic players that compete with increase emphasis on product quality attributes. Agri-food systems are thus increasingly governed by a range of inter-related public and private standards, both of which are becoming a priori mandatory, especially in supply chains for high-value and quality-differentiated agri-food products and tend to strongly affect upstream agricultural practices, firms’ internal organization and strategic behaviour and to shape the food chain organization. Notably, increasing attention has been given to the impact of SPS measures on agri-food trade and notably on developing countries’ export performance. Food and agricultural trade is the vital link in the mutual dependency of the global trade system and developing countries. Hence, developing countries derive a substantial portion of their income from food and agricultural trade. In Morocco, fruit and vegetable (especially fresh) are the primary agricultural export. Because of the labor intensity, this sector (especially citrus and tomato) is particularly important in terms of income and employment generation, especially for the female laborers hired in the farms and packing houses. Hence, the emergence of agricultural and agrifood product safety issues and the subsequent tightening of market requirements have challenged mutual gains due to the lack of technical and financial capacities of most developing countries.

Safety of diagnostic balloon occlusion in normal coronary arteries

Diagnostic coronary balloon occlusion (CBO) is mandatory for collateral function assessment, during angioscopy and optical coherence imaging, and when using certain coronary protection devices against emboli. Thus far, the safety of diagnostic CBO regarding procedural and long-term complications in normal coronary arteries has not been studied. In 316 patients, diagnostic CBO was performed for collateral function measurement in 426 angiographically normal vessels. The angioplasty balloon was inflated for 60 to 120 seconds using inflation pressures of 1 to 3 atm, followed by control angiography during and after CBO. Patients were divided into groups with entirely normal (n = 133) and partially normal (n = 183) vessels. Primary end points were procedural and long-term complications. De novo stenosis development was assessed by quantitative coronary angiography in 35% of the patients. Secondary end points were cardiac events at 5 years of follow-up. Procedural complications occurred in 1 patient (0.2%). In 150 repeat angiographic procedures in 92 patients (follow-up duration 10 +/- 15 months), quantitative coronary angiography revealed no difference in percentage diameter narrowing between baseline and follow-up (4.1% vs 3.9%, p = 0.69). During follow-up periods of 14 and 72 months, respectively, a new stenotic lesion was detected in 1 patient in each group (1.3%). Major cardiac events and percutaneous coronary intervention for stable angina were less frequent in the group with entirely normal than with partially normal vessels (0.8% vs 5.5%, p = 0.02, and 0.8% vs 18%, p <0.0001). In conclusion, low-inflation pressure diagnostic CBO in angiographically normal coronary arteries bears a minimal risk for procedural and long-term complications and can therefore be regarded as a safe procedure.

Update on safety during pregnancy of biological agents and some immunosuppressive anti-rheumatic drugs

A consensus paper concerning the interaction of anti-rheumatic drugs and reproduction was published in 2006, representing data collected during the year 2004 and 2005. Because of an increasing use of biological agents in women of fertile age, the information was updated for the years 2006 and 2007. Experts disagree whether TNF-inhibitors should be stopped as soon as pregnancy is recognized or may be continued throughout pregnancy. Pregnancy experience with abatacept and rituximab is still too limited to prove their safety for the developing fetus. They must be withdrawn before a planned pregnancy. LEF has not been proven to be a human teratogen. Registries of transplant recipients have shown that cyclosporin (CsA) and tacrolimus do not increase the rate of congenital anomalies, whereas mycophenolate mofetil (MMF) clearly carries a risk for congenital anomalies. Prophylactic withdrawal of drugs before pregnancy is mandatory for abatacept, rituximab, LEF and MMF. Data remain insufficient for gonadal toxicity of immunosuppressive drugs in men and for excretion of these drugs in human breast milk.

Driver Safety in Far-side and Far-oblique Crashes: A Study of Patrol Vehicles in the United States of America

The dissertation titled "Driver Safety in Far-side and Far-oblique Crashes" presents a novel approach to assessing vehicle cockpit safety by integrating Human Factors and Applied Mechanics. The methodology of this approach is aimed at improving safety in compact mobile workspaces such as patrol vehicle cockpits. A statistical analysis performed using Michigan state's traffic crash data to assess various contributing factors that affect the risk of severe driver injuries showed that the risk was greater for unrestrained drivers (OR=3.38, p<0.0001) and for incidents involving front and far-side crashes without seatbelts (OR=8.0 and 23.0 respectively, p<0.005). Statistics also showed that near-side and far-side crashes pose similar threat to driver injury severity. A Human Factor survey was conducted to assess various Human-Machine/Human-Computer Interaction aspects in patrol vehicle cockpits. Results showed that tasks requiring manual operation, especially the usage of laptop, would require more attention and potentially cause more distraction. A vehicle survey conducted to evaluate ergonomics-related issues revealed that some of the equipment was in airbag deployment zones. In addition, experiments were conducted to assess the effects on driver distraction caused by changing the position of in-car accessories. A driving simulator study was conducted to mimic HMI/HCI in a patrol vehicle cockpit (20 subjects, average driving experience = 5.35 years, s.d. = 1.8). It was found that the mounting locations of manual tasks did not result in a significant change in response times. Visual displays resulted in response times less than 1.5sec. It can also be concluded that the manual task was equally distracting regardless of mounting positions (average response time was 15 secs). Average speeds and lane deviations did not show any significant results. Data from 13 full-scale sled tests conducted to simulate far-side impacts at 70 PDOF and 40 PDOF was used to analyze head injuries and HIC/AIS values. It was found that accelerations generated by the vehicle deceleration alone were high enough to cause AIS 3 - AIS 6 injuries. Pretensioners could mitigated injuries only in 40 PDOF (oblique) impacts but are useless in 70 PDOF impacts. Seat belts were ineffective in protecting the driver's head from injuries. Head would come in contact with the laptop during a far-oblique (40 PDOF) crash and far-side door for an angle-type crash (70 PDOF). Finite Element analysis head-laptop impact interaction showed that the contact velocity was the most crucial factor in causing a severe (and potentially fatal) head injury. Results indicate that no equipment may be mounted in driver trajectory envelopes. A very narrow band of space is left in patrol vehicles for installation of manual-task equipment to be both safe and ergonomic. In case of a contact, the material stiffness and damping properties play a very significant role in determining the injury outcome. Future work may be done on improving the interiors' material properties to better absorb and dissipate kinetic energy of the head. The design of seat belts and pretensioners may also be seen as an essential aspect to be further improved.

Usage of Complementary Medicine in Switzerland: Results of the Swiss Health Survey 2012 and Development Since 2007

Background Complementary medicine (CM) is popular in Switzerland. Several CM methods (traditional Chinese medicine/acupuncture, homeopathy, anthroposophic medicine, neural therapy, and herbal medicine) are currently covered by the mandatory basic health insurance when performed by a certified physician. Treatments by non-medical therapists are partially covered by a supplemental and optional health insurance. In this study, we investigated the frequency of CM use including the evolvement over time, the most popular methods, and the user profile. Methods Data of the Swiss Health Surveys 2007 and 2012 were used. In 2007 and 2012, a population of 14,432 and 18,357, respectively, aged 15 years or older answered the written questionnaire. A set of questions queried about the frequency of use of various CM methods within the last 12 months before the survey. Proportions of usage and 95% confidence intervals were calculated for these methods and CM in general. Users and non-users of CM were compared using logistic regression models. Results The most popular methods in 2012 were homeopathy, naturopathy, osteopathy, herbal medicine, and acupuncture. The average number of treatments within the 12 months preceding the survey ranged from 3 for homeopathy to 6 for acupuncture. 25.0% of the population at the age of 15 and older had used at least one CM method in the previous 12 months. People with a chronic illness or a poor self-perceived health status were more likely to use CM. Similar to other countries, women, people of middle age, and those with higher education were more likely to use CM. 59.9% of the adult population had a supplemental health insurance that partly covered CM treatments. Conclusions Usage of CM in Switzerland remained unchanged between 2007 and 2012. The user profile in Switzerland was similar to other countries, such as Germany, United Kingdom, United States or Australia.

Emergency department usage patterns among residents of Hardin, Jefferson, and Orange Counties in southeast Texas

Emergency departments (EDs) have been called the net below the safety net due to their long history of providing care to the uninsured and others lacking access to the healthcare system. In past years, those with Medicaid and, more recently, those with Medicare, are also utilizing the ED as a medical home for routine primary care. There are many reasons for this but the costs to the community have become increasingly burdensome. ^ To evaluate how often the ED is being utilized for primary care, we applied a standardized tool, the New York University Algorithm, to over 43,000 ED visits when no hospitalization was required made by Hardin, Jefferson, and Orange County residents over a 12 month period. We compared our results to Harris County, where studies using the same framework have been performed, and found that sizeable segments of the population in both areas are utilizing the ED for non-emergent primary care that could be treated in a more cost-effective community setting. ^ We also analyzed our dataset for visit-specific characteristics. We found evidence of two possible health care disparities: (1) Blacks had a higher rate of primary care-related ED visits in relation to their percentage of the population when compared to other racial/ethnic groups; and (2) when form of payment is considered, the uninsured were more likely to have a primary care-related ED visit than any other group. These findings suggest a lack of community-based primary care services for the medically needy in Southeast Texas. ^ We believe that studies such as this are warranted elsewhere in Texas as well. We plan to present our findings to local policy makers, who should find this information helpful in identifying gaps in the safety net and assist them in better allocating scarce community resources. ^

The movement toward patient safety: State action related to reporting and disclosure of healthcare-associated infections

Increasing attention has been given to the problem of medical errors over the past decade. Included within that focused attention has been a strong interest in reducing the occurrence of healthcare-associated infections (HAIs). Acting concurrently with federal initiatives, the majority of U.S. states have statutorily required reporting and public disclosure of HAI data. Although the occurrence of these state statutory enactments and other state initiatives represent a recognition of the strong concern pertaining to HAIs, vast differences in each state’s HAI reporting and public disclosure requirements creates a varied and unequal response to what has become a national problem.^ The purpose of this research was to explore the variations in state HAI legal requirements and other state mandates. State actions, including statutory enactments, regulations, and other initiatives related to state reporting and public disclosure mechanisms were compared, discussed, and analyzed in an effort to illustrate the impact of the lack of uniformity as a public health concern.^ The HAI statutes, administrative requirements, and other mandates of each state and two U.S. territories were reviewed to answer the following seven research questions: How far has the state progressed in its HAI initiative? If the state has a HAI reporting requirement, is it mandatory or voluntary? What healthcare entities are subject to the reporting requirements? What data collection system is utilized? What measures are required to be reported? What is the public disclosure mechanism? How is the underlying reported information protected from public disclosure or other legal release?^ Secondary publicly available data, including state statutes, administrative rules, and other initiatives, were utilized to examine the current HAI-related legislative and administrative activity of the study subjects. The information was reviewed and analyzed to determine variations in HAI reporting and public disclosure laws. Particular attention was given to the seven key research questions.^ The research revealed that considerable progress has been achieved in state HAI initiatives since 2004. Despite this progress, however, when reviewing the state laws and HAI programs comparatively, considerable variations were found to exist with regards to the type of reporting requirements, healthcare facilities subject to the reporting laws, data collection systems utilized, reportable measures, public disclosure requirements, and confidentiality and privilege provisions. The wide variations in state statutes, administrative rules, and other agency directives create a fragmented and inconsistent approach to addressing the nationwide occurrence of HAIs in the U.S. healthcare system. ^

Survey analysis on dental infection control & occupational safety from India---1999 & 2010

The objective was to study knowledge, attitudes, practice (KAP) and needs regarding infection control measures using two cross-sectional surveys from 1999 and 2010 conducted in India. Both data collection instruments had only about 35 comparable variables in common. In 1999, there were 456 respondents (dentists) who completed a self-administered survey instrument compared to 272 respondents in 2010. Both the 1999 and 2010 samples were mutually independent with no overlap, had regional differences, and therefore, were not completely comparable for changes in KAP over time. While almost all respondents from both surveys felt that education in dental safety was needed and wanted mandatory dental safety curriculum in dental schools, severe inadequacies in dental safety knowledge, protection against immunizable diseases, and practice of universal precaution were noted. Data from the study demonstrated that there is a substantial opportunity to improve the knowledge, attitude and practice of dental infection control and occupational safety in India. Few respondents (27%) reported that the infectious disease status of a patient is always known and a significant number reported that they had the right to refuse care for patients of known infectious disease status. This indicates that Stigma in treating HIV/AIDS patients remains a concern, which in turn suggests that a stronger focus on educating dentists about dental safety and on stigma and infectious disease is needed. Information obtained from this study could be utilized for developing policies oriented towards increasing dental safety educational efforts, in both dental schools as curriculum, and for practicing dentists through professional updates or continuing dental education.^

Reliability issues related to the usage of Cloud Computing in Critical Infrastructures

The use of cloud computing is extending to all kind of systems, including the ones that are part of Critical Infrastructures, and measuring the reliability is becoming more difficult. Computing is becoming the 5th utility, in part thanks to the use of cloud services. Cloud computing is used now by all types of systems and organizations, including critical infrastructure, creating hidden inter-dependencies on both public and private cloud models. This paper investigates the use of cloud computing by critical infrastructure systems, the reliability and continuity of services risks associated with their use by critical systems. Some examples are presented of their use by different critical industries, and even when the use of cloud computing by such systems is not widely extended, there is a future risk that this paper presents. The concepts of macro and micro dependability and the model we introduce are useful for inter-dependency definition and for analyzing the resilience of systems that depend on other systems, specifically in the cloud model.

Formal verification of safety protocol in train control system

In order to satisfy the safety-critical requirements, the train control system (TCS) often employs a layered safety communication protocol to provide reliable services. However, both description and verification of the safety protocols may be formidable due to the system complexity. In this paper, interface automata (IA) are used to describe the safety service interface behaviors of safety communication protocol. A formal verification method is proposed to describe the safety communication protocols using IA and translate IA model into PROMELA model so that the protocols can be verified by the model checker SPIN. A case study of using this method to describe and verify a safety communication protocol is included. The verification results illustrate that the proposed method is effective to describe the safety protocols and verify deadlocks, livelocks and several mandatory consistency properties. A prototype of safety protocols is also developed based on the presented formally verifying method.

Core physics and safety analysis of Generation-IV Sodium Fast Reactors using existing and newly developed computational tools

El futuro de la energía nuclear de fisión dependerá, entre otros factores, de la capacidad que las nuevas tecnologías demuestren para solventar los principales retos a largo plazo que se plantean. Los principales retos se pueden resumir en los siguientes aspectos: la capacidad de proporcionar una solución final, segura y fiable a los residuos radiactivos; así como dar solución a la limitación de recursos naturales necesarios para alimentar los reactores nucleares; y por último, una mejora robusta en la seguridad de las centrales que en definitiva evite cualquier daño potencial tanto en la población como en el medio ambiente como consecuencia de cualquier escenario imaginable o más allá de lo imaginable. Siguiendo estas motivaciones, la Generación IV de reactores nucleares surge con el compromiso de proporcionar electricidad de forma sostenible, segura, económica y evitando la proliferación de material fisible. Entre los sistemas conceptuales que se consideran para la Gen IV, los reactores rápidos destacan por su capacidad potencial de transmutar actínidos a la vez que permiten una utilización óptima de los recursos naturales. Entre los refrigerantes que se plantean, el sodio parece una de las soluciones más prometedoras. Como consecuencia, esta tesis surgió dentro del marco del proyecto europeo CP-ESFR con el principal objetivo de evaluar la física de núcleo y seguridad de los reactores rápidos refrigerados por sodio, al tiempo que se desarrollaron herramientas apropiadas para dichos análisis. Efectivamente, en una primera parte de la tesis, se abarca el estudio de la física del núcleo de un reactor rápido representativo, incluyendo el análisis detallado de la capacidad de transmutar actínidos minoritarios. Como resultado de dichos análisis, se publicó un artículo en la revista Annals of Nuclear Energy [96]. Por otra parte, a través de un análisis de un hipotético escenario nuclear español, se evalúo la disponibilidad de recursos naturales necesarios en el caso particular de España para alimentar una flota específica de reactores rápidos, siguiendo varios escenarios de demanda, y teniendo en cuenta la capacidad de reproducción de plutonio que tienen estos sistemas. Como resultado de este trabajo también surgió una publicación en otra revista científica de prestigio internacional como es Energy Conversion and Management [97]. Con objeto de realizar esos y otros análisis, se desarrollaron diversos modelos del núcleo del ESFR siguiendo varias configuraciones, y para diferentes códigos. Por otro lado, con objeto de poder realizar análisis de seguridad de reactores rápidos, son necesarias herramientas multidimensionales de alta fidelidad específicas para reactores rápidos. Dichas herramientas deben integrar fenómenos relacionados con la neutrónica y con la termo-hidráulica, entre otros, mediante una aproximación multi-física. Siguiendo este objetivo, se evalúo el código de difusión neutrónica ANDES para su aplicación a reactores rápidos. ANDES es un código de resolución nodal que se encuentra implementado dentro del sistema COBAYA3 y está basado en el método ACMFD. Por lo tanto, el método ACMFD fue sometido a una revisión en profundidad para evaluar su aptitud para la aplicación a reactores rápidos. Durante ese proceso, se identificaron determinadas limitaciones que se discutirán a lo largo de este trabajo, junto con los desarrollos que se han elaborado e implementado para la resolución de dichas dificultades. Por otra parte, se desarrolló satisfactoriamente el acomplamiento del código neutrónico ANDES con un código termo-hidráulico de subcanales llamado SUBCHANFLOW, desarrollado recientemente en el KIT. Como conclusión de esta parte, todos los desarrollos implementados son evaluados y verificados. En paralelo con esos desarrollos, se calcularon para el núcleo del ESFR las secciones eficaces en multigrupos homogeneizadas a nivel nodal, así como otros parámetros neutrónicos, mediante los códigos ERANOS, primero, y SERPENT, después. Dichos parámetros se utilizaron más adelante para realizar cálculos estacionarios con ANDES. Además, como consecuencia de la contribución de la UPM al paquete de seguridad del proyecto CP-ESFR, se calcularon mediante el código SERPENT los parámetros de cinética puntual que se necesitan introducir en los típicos códigos termo-hidráulicos de planta, para estudios de seguridad. En concreto, dichos parámetros sirvieron para el análisis del impacto que tienen los actínidos minoritarios en el comportamiento de transitorios. Concluyendo, la tesis presenta una aproximación sistemática y multidisciplinar aplicada al análisis de seguridad y comportamiento neutrónico de los reactores rápidos de sodio de la Gen-IV, usando herramientas de cálculo existentes y recién desarrolladas ad' hoc para tal aplicación. Se ha empleado una cantidad importante de tiempo en identificar limitaciones de los métodos nodales analíticos en su aplicación en multigrupos a reactores rápidos, y se proponen interesantes soluciones para abordarlas. ABSTRACT The future of nuclear reactors will depend, among other aspects, on the capability to solve the long-term challenges linked to this technology. These are the capability to provide a definite, safe and reliable solution to the nuclear wastes; the limitation of natural resources, needed to fuel the reactors; and last but not least, the improved safety, which would avoid any potential damage on the public and or environment as a consequence of any imaginable and beyond imaginable circumstance. Following these motivations, the IV Generation of nuclear reactors arises, with the aim to provide sustainable, safe, economic and proliferationresistant electricity. Among the systems considered for the Gen IV, fast reactors have a representative role thanks to their potential capacity to transmute actinides together with the optimal usage of natural resources, being the sodium fast reactors the most promising concept. As a consequence, this thesis was born in the framework of the CP-ESFR project with the generic aim of evaluating the core physics and safety of sodium fast reactors, as well as the development of the approppriated tools to perform such analyses. Indeed, in a first part of this thesis work, the main core physics of the representative sodium fast reactor are assessed, including a detailed analysis of the capability to transmute minor actinides. A part of the results obtained have been published in Annals of Nuclear Energy [96]. Moreover, by means of the analysis of a hypothetical Spanish nuclear scenario, the availability of natural resources required to deploy an specific fleet of fast reactor is assessed, taking into account the breeding properties of such systems. This work also led to a publication in Energy Conversion and Management [97]. In order to perform those and other analyses, several models of the ESFR core were created for different codes. On the other hand, in order to perform safety studies of sodium fast reactors, high fidelity multidimensional analysis tools for sodium fast reactors are required. Such tools should integrate neutronic and thermal-hydraulic phenomena in a multi-physics approach. Following this motivation, the neutron diffusion code ANDES is assessed for sodium fast reactor applications. ANDES is the nodal solver implemented inside the multigroup pin-by-pin diffusion COBAYA3 code, and is based on the analytical method ACMFD. Thus, the ACMFD was verified for SFR applications and while doing so, some limitations were encountered, which are discussed through this work. In order to solve those, some new developments are proposed and implemented in ANDES. Moreover, the code was satisfactorily coupled with the thermal-hydraulic code SUBCHANFLOW, recently developed at KIT. Finally, the different implementations are verified. In addition to those developments, the node homogenized multigroup cross sections and other neutron parameters were obtained for the ESFR core using ERANOS and SERPENT codes, and employed afterwards by ANDES to perform steady state calculations. Moreover, as a result of the UPM contribution to the safety package of the CP-ESFR project, the point kinetic parameters required by the typical plant thermal-hydraulic codes were computed for the ESFR core using SERPENT, which final aim was the assessment of the impact of minor actinides in transient behaviour. All in all, the thesis provides a systematic and multi-purpose approach applied to the assessment of safety and performance parameters of Generation-IV SFR, using existing and newly developed analytical tools. An important amount of time was employed in identifying the limitations that the analytical nodal diffusion methods present when applied to fast reactors following a multigroup approach, and interesting solutions are proposed in order to overcome them.