Multi-body modelling of wagon trains for crashworthiness analysis

Three-dimensional wagon train models have been developed for the crashworthiness analysis using multi-body dynamics approach. The contributions of the train size (number of wagon) to the frontal crash forces can be identified through the simulations. The effects of crash energy management (CEM) design and crash speed on train crashworthiness are examined. The CEM design can significantly improve the train crashworthiness and the consequential vehicle stability performance - reducing derailment risks.

When non-significance maybe significant: lessons learned from a study into the development, implementation and evaluation of a risk assessment tool for fleet settings

Introduction This study reports on the development of a self report assessment tool to increase the efficacy of crash prediction within Australian Fleet settings Over last 20 years an array of measures have been produced (Driver anger scale, Driving Skill Inventory, Manchester Driver Behaviour Questionnaire, Driver Attitude Questionnaire, Driver Stress Inventory, Safety Climate Questionnaire) While these tools are useful, research has demonstrated limited ability to accurately identify individuals most likely to be involved in a crash. Reasons cited include; - Crashes are relatively rare - Other competing factors may influence crash event - Ongoing questions regarding the validity of self report measures (common method variance etc) - Lack of contemporary issues relating to fleet driving performance

Commentaries and Responses to "The Driver Behaviour Questionnaire as a predictor of accidents: A meta-analysis" [Commentaries lead by Anders af Wahlberg; Responses lead by J.C.F. de Winter]

The following discussion is in response to a 2010 article published in the Journal of Safety Research by J.C.F. de Winter and D. Dodou entitled “The Driver Behaviour Questionnaire as a predictor of accidents: A meta-analysis” (Volume 41, Number 6, pp. 463-470, available on sciencedirect.com). The editors are pleased to provide a forum for this exchange and welcome further comments.

An approach for current balancing in distribution networks with rooftop PVs

Current unbalance is a significant power quality problem in distribution networks. This problem increases further with the increased penetration of single-phase photovoltaic cells. In this paper, a new approach is developed for current unbalance reduction in medium voltage distribution networks. The method is based on utilization of three single-phase voltage source converters connected in delta configuration between the phases. Each converter is controlled to function as a varying capacitor. The combination of the load and the compensator will result in a balanced load with unity power factor. The efficacy of the proposed current unbalance reduction concept is verified through dynamic simulations in PSCAD/EMTDC.

Distribution feeder loads classification and decomposition

Load in distribution networks is normally measured at the 11kV supply points; little or no information is known about the type of customers and their contributions to the load. This paper proposes statistical methods to decompose an unknown distribution feeder load to its customer load sector/subsector profiles. The approach used in this paper should assist electricity suppliers in economic load management, strategic planning and future network reinforcements.

Innovative approaches to teaching engineering drawing at tertiary institutions

This paper arises from our concern for the level of teaching of engineering drawing at tertiary institutions in Australia. Little attention is paid to teaching hand drawing and tolerancing. Teaching of engineering drawing is usually limited to computer-aided design (CAD) using AutoCAD or one of the solid-modelling packages. As a result, many engineering graduates have diffi culties in understanding how views are produced in different projection angles, are unable to produce engineering drawings of professional quality, or read engineering drawings, and unable to select fits and limits or surface roughness. In the Faculty of Built Environment and Engineering at the Queensland University of Technology new approaches to teaching engineering drawing have been introduced. In this paper the results of these innovative approaches are examined through surveys and other research methods.

A hybrid stereo matching algorithm incorporating the rank constraint

A fundamental problem faced by stereo vision algorithms is that of determining correspondences between two images which comprise a stereo pair. This paper presents work towards the development of a new matching algorithm, based on the rank transform. This algorithm makes use of both area-based and edge-based information, and is therefore referred to as a hybrid algorithm. In addition, this algorithm uses a number of matching constraints, including the novel rank constraint. Results obtained using a number of test pairs show that the matching algorithm is capable of removing most invalid matches. The accuracy of matching in the vicinity of edges is also improved.

Benchmarking knowledge-based urban development performance : Results from the international comparison of Helsinki

In the era of a global knowledge economy, urban regions that seek to increase their competitive edge, become destinations for talent and investment and provide prosperity and high quality of life to their inhabitants have little chance of achieving these goals without forming effective knowledge-based urban development strategies. The research reported in this paper aims to address the questions of how a knowledge-based urban development performance measurement can be undertaken and the value contribution of such measurement. The paper focuses on the city of Helsinki. This empirical study analytically investigates Helsinki’s performance from the lens of knowledge-based urban development by comparing this urban region with eight international competitors, Boston, San Francisco, Birmingham, Manchester, Melbourne, Sydney, Toronto, and Vancouver. The results of the study not only reveal a clearer understanding of Helsinki’s benchmarked performance and competitive edge considering the regional policy context along with strategic directions in strengthening its international standing and competitiveness but also provide useful insights for other urban regions that aspire to such development.

Identifying an appropriate driving behaviour scale for the occupational driving context : the DBQ vs. the ODBQ

Self reported driving behaviour in the occupational driving context has typically been measured through scales adapted from the general driving population (i.e. the Manchester Driver Behaviour Questionnaire (DBQ)). However, research suggests that occupational driving is influenced by unique factors operating within the workplace environment, and thus, a behavioural scale should reflect those behaviours prevalent and unique within the driving context. To overcome this limitation, developed the Occupational Driver Behaviour Questionnaire (ODBQ) which utilises a relevant theoretical model to assess the impact of the broader workplace context on driving behaviour. Although the theoretical argument has been established, research is yet to examine whether the ODBQ or the DBQ is a more sensitive measure of the workplace context. As such, this paper identifies selected organisational factors (i.e. safety climate and role overload) as predictors of the DBQ and the ODBQ and compares the relative predictive value in both models. In undertaking this task, 248 occupational drivers were recruited from a community-oriented nursing population. As predicted, hierarchical regression analyses revealed that the organisational factors accounted for a significantly greater proportion of variance in the ODBQ than the DBQ. These findings offer a number of practical and theoretical applications for occupational driving practice and future research.

Decision and reasons for calling an ambulance : patients’ perspective

Background: Demand for pre-hospital emergency care is increasing in Australia as in many other countries. Using posthoc criteria such as triage, diagnosis and admission status, some authors view a considerable number of these as "inappropriate". Yet, calling an ambulance at the time of emergency is rarely studied from the patients’ or their carers’ perspective. This study interviewed patients about the decision, circumstances surrounding and reasons for calling an ambulance in Queensland, Australia. Methods: A cross-sectional survey of patients attending a sample of eight public hospital emergency departments in Queensland was undertaken between March and May 2011. In total, 911 questionnaires were collected (response rate: 67%), of whom 226 (24.8%) had arrived by ambulance. Results: In 35.6% of ambulance arrivals, the decision to request an ambulance was made by the patient; 25% by a doctor; 20% by a family member, friend or carer. Other callers included nurse, people at work or school, and passers-by. Reasons to request an ambulance included urgency (87%) and severity (84%) of the condition. Other reasons included requiring special care (76%), getting higher priority at the emergency department (34%), not having a car (34%), and financial concerns (17%). Decision to request an ambulance varied significantly according to the time of illness onset (e.g. on the day, week before), and location (e.g. home, outside). Conclusion: The decision to call an ambulance is made mostly by non-medical professionals in a perceived emergency situation. They call the ambulance for different reasons but mainly take into account the patient’s welfare and safety. Better understanding of these reasons will affect the direction and effectiveness of demand management strategies.

The growing demand for emergency healthcare

Emergency health is a critical component of health systems; one increasingly congested from growing demand and blocked access to care. The Emergency Health Services Queensland (EHSQ) study aimed to identify the factors driving increased demand for emergency healthcare. This study examined data on patients treated by the ambulance service and Emergency Departments across Queensland. Data was derived from the Queensland Ambulance Service’s (QAS) Ambulance Information Management System and electronic Ambulance Report Form and from the Emergency Department Information System (EDIS). Data was obtained for the period 2001-02 through to 2009-10. A snapshot of users for the 2009-10 year was used to describe the characteristics of users and comparisons made with the year 2003-04 to identify trends. Per capita demand for EDs has increased by 2% per annum over the decade and for ambulance by 3.7% per annum. The growth in ED demand is most significant in more urgent triage categories with decline in less urgent patients. The growth is most prominent amongst patients suffering injuries and poisoning, amongst both men and women and across all age groups. Patients from lower socioeconomic areas appear to have higher utilisation rates and the utilisation rate for indigenous people exceeds those of other backgrounds. The utilisation rates for immigrant people is less than Australian born however it has not been possible to eliminate the confounding impact of age and socioeconomic profiles. These findings contribute to an understanding of the growth in demand for emergency health. It is evident that the growth is amongst patients in genuine need of emergency healthcare and public rhetoric that congested emergency health services is due to inappropriate attendees is unsustainable. The growth in demand over the last decade reflects not only on changing demographics of the Australian population but also changes in health status, standards of acute health care and other social factors.

Knowledge-based urban development performance analysis : moving towards an integrated system

Knowledge-based urban development (KBUD) has become the new development paradigm for the cities of the global knowledge economy era. Nevertheless, to date international KBUD performance analysis of prosperous knowledge cities is understudied. This paper, therefore, introduces the methodology and application of a novel performance analysis approach to comprehensively scrutinise the global perspectives on KBUD of cities—i.e., The KBUD Assessment Model (KBUD/AM). This indexing model puts 11 renowned knowledge cities—i.e., Birmingham, Boston, Brisbane, Helsinki, Istanbul, Manchester, Melbourne, San Francisco, Sydney, Toronto, Vancouver—under the KBUD microscope to provide a benchmarked international outlook. The results of the indexing provide internationally benchmarked snapshot of the degree of achievements in various KBUD performance areas. This paper discusses the further development avenues and potentialities of the index to become an integrated system for the policy-making circles of cities to benchmark themselves against their competitors and develop relevant KBUD policies.