Regional implications of macro-economic, sectoral and company changes in the development of technopoles in Britain and France

This paper reports the proceedings of a conference held at Reading University in 1993 which addressed the issues of new technological developments at the regional and sub-regional levels in Britain and France. These new technological clusters - the `Technopoles' - are investigated in a series of papers in both English and French which examines their spatial, sectoral and economic aspects to determine what lessons can be learned from their development and what their future economic significance is likely to be. Two recurring themes are of particular significance in the papers - the link between R& D and regional development, and the different forms which innovation assumes within the various technopoles under scrutiny.

2D hexagonal mesoporous platinum films exhibiting biaxial, in-plane pore alignment

The synthesis of 2D hexagonal mesoporous platinum films with biaxial, in-plane pore alignment is demonstrated by electrodeposition through an aligned lyotropic liquid crystal templating phase. Shear force is used to align a hexagonal lyotropic liquid crystalline templating phase of an inexpensive and a commercially available surfactant, C16EO10, at the surface of an electrode. Electrodeposition and subsequent characterisation of the films produced shows that the orientation and alignment of the phase is transferred to the deposited material. Transmission electron microscopy confirms the expected nanostructure of the films, whilst transmission and grazing incidence small angle X-ray scattering analysis confirms biaxial, in plane alignment of the pore structure. In addition further electrochemical studies in dilute sulfuric acid and methanol show that the pores are accessible to electrolyte solution as indicated by a large current flow; the modified electrode therefore has a high surface area, that catalyses methanol oxidation, and the pores have a very large aspect ratio (of theoretical maximum 2 × 105). Films with such aligned mesoporosity will advance the field of nanotechnology where the control of pore structure is paramount. The method reported is sufficiently generic to be used to control the structure and order of many materials, thus increasing the potential for the development of a wide range of novel electronic and optical devices.

Macro-economic and financial determinants of comovement across global real estate security markets

This paper models the determinants of integration in the context of global real estate security markets. Using both local and U.S. Dollar denominated returns, we model conditional correlations across listed real estate sectors and also with the global stock market. The empirical results find that financial factors, such as the relationship with the respective equity market, volatility, the relative size of the real estate sector and trading turnover all play an important role in the degree of integration present. Furthermore, the results highlight the importance of macro-economic variables in the degree of integration present. All four of the macro-economic variables modeled provide at least one significant result across the specifications estimated. Factors such as financial and trade openness, monetary independence and the stability of a country’s currency all contribute to the degree of integration reported.

Making the most of PAS data: Macro- and micro-level studies of Romano-British settlement

The Portable Antiquities Scheme (PAS) database includes records of over 225,000 artefacts of Roman date, with a wide geographical coverage and the potential to contribute to our understanding of Romano-British landscapes and settlement at several scales of analysis. This paper draws upon the author’s doctoral research to describe regional case studies from six counties (Wiltshire, Worcestershire, Warwickshire, Northamptonshire, North Lincolnshire and Cumbria) on the use of PAS data. The data have value nationally and regionally as general guides to ancient settlement patterns, but it is arguably at the micro-scale that they have the most potential. With reference to detailed landscape studies from parts of Warwickshire and Wiltshire, the paper argues that sites represented by PAS data are often rural settlements that show evidence for continued activity throughout the Roman period. The paper demonstrates that with an appropriate methodology PAS data can be an immensely valuable archaeological resource, particularly when interpreted at multiple scales, and can be considerably more than a guide to broad distributions of Roman finds.

The effect of macro and micro-nutrient fortification of biscuits on their sensory properties and on hedonic liking of older people

BACKGROUND: Under-nutrition in older adults is widespread. Oral nutritional supplement beverages (ONS) are prescribed, yet consumption by older people is often insufficient. A variety of supplement formats may improve nutrient intake. This study developed protein and micro-nutrient fortified biscuits and evaluated their sensory attributes and liking by older people. Two micro-nutrient strategies were taken, to match typical ONS and to customise to the needs of older people. RESULTS: Oat biscuits and gluten-free biscuits developed contained over 12% protein and over 460 kcal 100 g-1 . Two small (40 g) biscuits developed to match ONS provided approximately 40% of an ONS portion of micro-nutrients and 60% of macro-nutrients; however, the portion size was considered realistic whereas the average ONS portion (200 mL) is excessive. Biscuits developed to the needs of older adults provided, on average, 18% of the reference nutrient intake of targeted micro-nutrients. Sensory characteristics were similar between biscuits with and without micro-nutrient fortification, leading to no differences in liking. Fortified oat biscuits were less liked than commercial oat biscuits, partly attributed to flavour imparted by whey protein fortification. CONCLUSION: Macro- and micro-nutrient fortification of biscuits could provide an alternative fortified snack to help alleviate malnutrition in older adults.

Assessing macro uncertainty in real-time when data are subject to revision

Model-based estimates of future uncertainty are generally based on the in-sample fit of the model, as when Box-Jenkins prediction intervals are calculated. However, this approach will generate biased uncertainty estimates in real time when there are data revisions. A simple remedy is suggested, and used to generate more accurate prediction intervals for 25 macroeconomic variables, in line with the theory. A simulation study based on an empirically-estimated model of data revisions for US output growth is used to investigate small-sample properties.

Bank loan terms and conditions: is there a macro effect?

We examine whether macroeconomic factors contain significant information for bank loan contracting terms and conditions (T&Cs), over and above that of standard firm-specific or country-level institutional factors. Our estimation is based on a seemingly unrelated mixed-processes methodology that accommodates two salient data properties: (i) the fact that loan contract terms are determined jointly as a single lending contract, and (ii) the fact that the elements of loan T&Cs are generated by different distributional formats. Our findings indicate that cross-country variation accounts for a significant portion of observed variation in loan T&Cs. In addition, macroeconomic fundamentals significantly explain the “package” of loan T&Cs offered to corporate borrowers, with this effect being distinct from any influence that T&Cs receive from firm-specific factors, and also from country-specific institutional factors.

Influence of macro- and micronutrient fertilization on fungal contamination and fumonisin production in corn grains

The aim of this study was to investigate the effects of nutrients (nitrogen, zinc and boron) on fungal growth and fumonisins production in corn samples obtained at the beginning of grain formation and at harvest. Three nitrogen doses were applied to the corn plants through soil in combination with three zinc doses and two boron doses during sowing. Mycological analysis of grains, using Dichloran Rose-Bengal Chloramphenicol Agar, collected at the beginning of formation demonstrated a fungal population predominantly of yeasts. Analysis of freshly harvested corn revealed a higher frequency of Penicillium spp. (72%) and F verticillioides (27%). High Performance Liquid Chromatography analysis revealed that 100% of grains were contaminated with fumonisins B, at levels ranging from 0.3 to 24.3 mg/kg and 93% contaminated with fumonisin B(2) at levels ranging from 0.05 to 5.42 mg/kg. Nitrogen (50 kg/ha) in combination with boron (0.5 kg/ha) resulted in an increased fumonisin B2 production. (c) 2007 Elsevier Ltd. All rights reserved.

Immunological parameters related to the adjuvant effect of the ordered mesoporous silica SBA-15

In 2006, the first report of a nanostructured material as adjuvant was described establishing the effectiveness of the ordered mesoporous SBA-15 silica as an immune adjuvant. The present study evaluated the SBA-15 capacity to modulate the immune responsiveness of High and Low responder mice immunized with BSA encapsulated/adsorbed in SBA-15 by the intramuscular or oral route and the adjuvant effect was compared with the responsiveness induced by BSA in aluminum hydroxide salts or emulsified in Incomplete Freund adjuvant. These results demonstrate the ability of the non-toxic SBA-15 nanoparticles to increase the immunogenicity and repair the responsiveness of the constitutively low responder individuals inducing both the IgG2a and the IgG1 isotypes, independently of the immune cell committed and conditioning the low phenotype. This new adjuvant may reveal novel therapeutic targets for immune modulation and vaccine design. (C) 2010 Elsevier Ltd. All rights reserved.

Synthesis, characterization and catalytic evaluation of cubic ordered mesoporous iron-silicon oxides

Iron was successfully incorporated in FDU-1 type cubic ordered mesoporous silica by a simple direct synthesis route. The (Fe/FDU-1) samples were characterized by Rutherford back-scattering spectrometry (RBS), small angle X-ray scattering (SAXS). N(2) sorption isotherm, X-ray diffraction (XRD) and X-ray absorption spectroscopy (XAS). The resulting material presented an iron content of about 5%. Prepared at the usual acid pH of -0.3, the composite was mostly formed by amorphous silica and hematite with a quantity of Fe(2+) present in the structure. The samples prepared with adjusted pH values (2 and 3.5) were amorphous. The samples` average pore diameter was around 12.0 nm and BET specific surface area was of 680 m(2) g(-1). Although the iron-incorporated material presented larger lattice parameter, about 25 nm compared to pure FDU-1, the Fe/FDU-1 composite still maintained its cubic ordered fcc mesoporous structure before and after the template removal at 540 degrees C. The catalytic performance of Fe/FDU-1 was investigated in the catalytic oxidation of Black Remazol B dye using a catalytic ozonation process. The results indicated that Fe/FDU-1 prepared at the usual acid pH exhibited high catalytic activity in the mineralization of this pollutant when compared to the pure FDU-1. Fe(2)O(3) and Fe/FDU-1 prepared with higher pH of 2 and 3.5. (C) 2010 Elsevier B.V. All rights reserved.

Immobilization of glucose oxidase enzyme (GOD) in large pore ordered mesoporous cage-like FDU-1 silica

Large pore ordered mesoporous silica FDU-1 with three-dimensional (3D) face-centered cubic, Fm3m arrangement of rnesopores, was synthesized under strong acid media using B-50-6600 poly(ethylene oxide)-poly(butylene oxide)-poly(ethylene oxide) triblock copolymer (EO(39)BO(47)EO(39)), tetraethyl orthosilicate (TEOS) and trimethyl-benzene (TMB). Large pore FDU-1 silica was obtained by using the following gel composition 1TEOS:0.00735B50-6600:0.00735TMB:6HCl:155H(2)O. The pristine material exhibited a BET specific surface area of 684 m(2) g(-1), total pore volume of 0.89 cm(3) g(-1), external surface area of 49 m(2) g(-1) and microporous volume of 0.09 cm(3) g(-1). The enzyme activity was determined by the Flow Injection Analysis-Chemiluminescence (FIA-CL) method. For GOD immobilized on the FDU-1 silica, GOD supernatant and GOD solution, the FIA-CL results were 9.0, 18.6 and 34.0 U, respectively. The value obtained for the activity of the GOD solution with FIA-CL method is in agreement with the 35 U, obtained by spectrophotometry. (C) 2011 Elsevier B.V. All rights reserved.

Synthesis and structure of cage-like mesoporous silica using different precursors

In this work the synthesis of cubic, FDU-1 type, ordered mesoporous silica (OMS) was developed from two types of silicon source, tetraethyl orthosilicate (TEOS) and a less expensive compound, sodium silicate (Na(2)Si(3)O(7)), in the presence of a new triblock copolymer template Vorasurf 504 (EO(38)BO(46)EO(38)). For both silicon precursors the synthesis temperature was evaluated. For TEOS the effect of polymer dissolution in methanol and the acid solution (HCl and HBr) on the material structure was analyzed. For Na(2)Si(3)O(7) the influence of the polymer mass and the hydrothermal treatment time were the explored experimental parameters. The samples were examined by Small Angle X-ray Scattering (SAXS) and Nitrogen Sorption. For both precursors the decrease on the synthesis temperature from ambient, -25 degrees C, to -15 degrees C improved the ordered porous structure. For TEOS, the SAXS results showed that there is an optimum amount of hydrophobic methanol that contributed to dissolve the polymer but did not provoke structural disorder. The less electronegative Br-ions, when compared to Cl-, induced a more ordered porous structure, higher surface areas and larger lattice parameters. For Na(2)Si(3)O(7) the increase on the hydrothermal treatment time as well as the use of an optimized amount of polymer promoted a better ordered porous structure. (C) 2011 Elsevier B.V. All rights reserved.

Specific surface area and structures of aluminas from fibrillar pseudoboehmite

By heating powders of the aluminum monohydroxide fibrillar pseudoboehmite from 200 degrees C to 1400 degrees C several high surface area aluminas are prepared and characterized by X-ray diffraction and electron optical methods. Aqueous sols with pseudoboehmite fibrils of different lengths were dried by two methods: at room temperature and spray-dried. The following aluminas were obtained after treatment of the powders at increasing temperatures and having a range of specific surface areas: gamma-Al(2)O(3) (470 degrees C - 770 degrees C; 179 m(2)/g 497 m(2)/g); delta-Al(2)O(3) (770 degrees C - 930 degrees C; 156 m(2)/g - 230 m(2)/g); theta-Al(2)O(3) (930 degrees C - 1050 degrees C; 11 m(2)/g - 200 m(2)/g); alpha-Al(2)O(3) (1050 degrees C - 1400 degrees C; 2 m(2)/g - 17 m(2)/g). Spray-dried powders, fired at the same temperature than the ground powders, showed higher specific surface areas. The higher surface area alumina have values of the same order of magnitude of the commercial ""ad-cat"" aluminas.