PREVALENCIA DE SINTOMATOLOGÍA MÚSCULO ESQUELÉTICAS DE CUELLO, HOMBRO Y ESPALDA LUMBAR EN LOS TRABAJADORES DE MINAS SUBTERRÁNEAS DE CARBÓN EN EL DEPARTAMENTO DE BOYACÁ, COLOMBIA, 2013

Introducción. Trabajo de investigación realizado dentro del proyecto “EVALUACIÓN DE LA EXPOSICIÓN A POLVO DE CARBÓN EN MINERÍA SUBTERRÁNEA EN TRES DEPARTAMENTOS DE COLOMBIA” liderado por el grupo Salud Ocupacional y del Ambiente, con la participación de la Universidad del Rosario, la Universidad de los Andes, el Ministerio de Trabajo, la Administradora de Riesgos Laborales Positiva. Inmerso en este proyecto se determinará en el departamento de Boyacá la prevalencia de sintomatología músculo esquelética Objetivo. Determinar la sintomatología músculo esquelética en cuello, hombros y espalda lumbar, en trabajadores de minas de carbón subterráneas del departamento de Boyacá, mediante la aplicación del Cuestionario Nórdico Estandarizado específico y su relación con variables sociodemográficas y ocupacionales. Metodología. Estudio de corte transversal que se realizó en una población de minería subterránea del departamento mediante la aplicación del Cuestionario Nórdico Estandarizado específico. Resultados. La sintomatología en cuello, hombros y espalda reportada fue de 44,1%, 37,1% y 68,2% respectivamente por los trabajadores. La antigüedad laboral en promedio fue de 17,06 (DS 7,93), la media de edad fue 40,46 (DS 11,12 años). De los 170 trabajadores encuestados el 74,7% (127) se desempeñan como picadores, seguidos por cocheros 10,6% (18), malacatero 5,3% (9), el restante se desempeña en otras labores de minería. Conclusiones. Este estudio encontró un alta prevalencia de sintomatología músculo esquelética en los trabajadores de minería de carbón subterránea, lo que sugiere la necesidad de generar estudios ergonómicos y estrategias de prevención para evitar un aumento en la cifras de enfermedades profesionales como desordenes músculo esqueléticos.

Estudio de corte transversal:Asociación entre los riesgos identificados por los trabajadores y los establecidos por las empresas de Minería Subterránea, Cundinamarca, 2014.

Introducción: El sector de la minería es fuente de desarrollo económico y social para Colombia (La Locomotora minera), ante este espectro se hace necesario su estudio en salud ocupacional. Objetivo: Caracterizar los subprogramas de medicina preventiva y del trabajo, higiene y seguridad industrial de las empresas de minería subterránea de carbón y determinar la asociación entre los riesgos identificados por los trabajadores y los establecidos por la empresa en el departamento de Cundinamarca. Materiales y métodos Estudio de corte transversal , utilizando dos tipos de cuestionarios estructurados: uno para empresa que caracterizó el estado del Programa de Salud Ocupacional, el otro dirigido a los empleados que identificó el conocimiento de los riesgos de exposición, uso de elementos de protección personal y acciones realizadas por el empleador. Resultados El desarrollo del Programa de Salud Ocupacional en Cundinamarca es bajo, en un rango del 25,26% al 38,85%. En la identificación del riesgo se presentó asociación en temperaturas extremas (5,00%) y uso de herramientas corto punzantes (58,8%). En uso de protección personal y su suministro se encontró asociación en mascarilla (60,00%) y eslinga (94,70%). Conclusiones Es necesario la implementación de controles estatales que mitiguen los riesgos, se cumpla con buenas condiciones laborales para disminuir índices de accidentalidad y enfermedad laboral.

Bases curriculares de la Formación Ocupacional.

Observar como se plasma el vínculo entre currículum, formación y empleo/desempleo. Dilucidar el papel que tiene la Formación Ocupacional de cara a la consecución de un empleo, el cambio profesional y la adaptación al trabajo. 350 trabajadores contratados mediante oferta presentada al INEM, extraídos mediante muestreo sistemático (una de cada 12 ofertas) en 10 oficinas del INEM existentes en Barcelona, en 1987, y estratificada según tipo de oferta, sexo y edad. En la primera fase analiza la problemática curricular: entornos del currículum y teoría curricular; y el trabajo y la formación desde una perspectiva soc opolítica -a partir de un esbozo de la historia de la cultura y, centrándose en el Sistema Educativo Español analiza el papel de la Formación Ocupacional y su viabilidad como alternativa o complemento a la Formación Profesional reglada. En la segunda fase, mediante una metodología empírico-descriptiva pone a prueba las reflexiones y tesis mantenidas el la primera parte. Trabaja las variables sexo, edad, nivel académico, formación ocupacional y experiencia. Cuestionario de oferta y cuestionario del trabajador ad hoc. Entrevista telefónica mediante cuestionario cerrado. En la primera parte se sirve de un análisis crítico y contextualizado de los datos, informes y bibliografía utilizada. En el estudio empírico-descriptivo utiliza la prueba de Chi cuadrado tanto para determinar la significación entre proporciones como para establecer relaciones de dependencia/independencia entre variables. Utiliza los siguientes soportes electrónicos: Locoscript (Locomotive software), Word (Microsoft), Dbase III (Microsoft), Gem Graph (Digital Research), Gem Paint (Digital Research). El sexo y la edad del trabajador inciden el la ocupación, la edad incide, además, en el tipo y duración del contrato, tanto en oferta como en relación a la contratación real. El nivel académico y la Formación Ocupacional inciden en la ocupación y la valoración propia respecto a la preparación para un empleo; pero no inciden en el tipo ni la duración del contrato. La experiencia incide en el tipo de contrato ofertado, en el tipo de contrato real, en la ocupación, y en la duración del contrato. La continuidad en una profesión no se ve afectada significativamente ni por el sexo, ni por la edad, ni por el nivel académico, ni por la Formación Ocupacional. La complejidad, el dinamismo y la interdependencia de las sociedades modernas, trasladan el tema de la formación más allá de la escuela y producen una nueva conceptualización del trabajo, el ocio y la participación social. Trabajar va a ser cada vez más cuestión de adaptación polivalente que profesión disciplinar.

Projecte d'instal·lació de caldera de vapor de 5.000 kg/h i serveis auxiliars per [a] una empresa situada a Vic

L’empresa RUSCALLEDA, S.L., ubicada a la localitat de Vic, es dedica a l’elaboració de productes alimentaris. La instal·lació actual de generació de calor utilitza una caldera antiga de combustible líquid i té una capacitat de producció de vapor de 1.500 kg/h. A causa de la demanda creixent de productes semielaborats, l'empresa vol instal·lar tres unitats noves de la línia final de productes semielaborats. Aquestes noves unitats tindrien un considerable consum d’energia calorífica en forma de vapor i requeririen actualitzar la instal·lació actual de producció i distribució de calor. L’objecte del projecte és la instal·lació d’un segon generador de vapor que sigui capaç d’alimentar la instal·lació actual més l’ampliació, quedant el generador actual en paral·lel per ser utilitzat en cas d’emergència

The actual status of the development of a Danish/Swedish system concept of a solar combisystem

At the beginning of 2003 the four year long research project REBUS on education, research, development and demonstration of competitive solar combisystems was launched. Research groups in Norway, Denmark, Sweden and Latvia are working together with partners from industry on innovative solutions for solar heating in the Nordic countries. Existing system concepts have been analyzed and based on the results new system designs have been developed. The proposed solutions have to fulfill country specific technical, sociological and cost requirements. Due to the similar demands on the systems in Denmark and Sweden it has been decided to develop a common system concept for both countries, which increases the market potential for the manufacturer. The focus of the development is on systems for the large number of rather well insulated existing single family houses. In close collaboration with the industrial partners a system concept has been developed that is characterized by its high compactness and flexibility. It allows the use of different types of boilers, heating distribution systems and a variable store and collector size. Two prototypes have been built, one for the Danish market with a gas boiler, and one for the Swedish market with a pellet boiler as auxiliary heater. After intensive testing and eventual further improvements at least two systems will be installed and monitored in demonstration houses. The systems have been modeled in TRNSYS and the simulation results will be used to further improve the system and evaluate the system performance.

Development of a Compact Solar Combisystem

Within the frame of the project REBUS, "Competitive solar heating systems for residential buildings", which is financed by Nordic Energy Research, a new type of compact solar combisystem with high degree of prefabrication was developed. A hydraulic and control concept was designed with the goal to get highest system efficiency for use with either a condensing natural gas boiler or a pellet boiler. Especially when using the potential of high peak power of modern condensing natural gas boilers, a new operation strategy of a natural gas boiler/solar combisystem can increase the energy savings of a small solar combisystem by about 80% compared to conventional operation strategies.

Mätning och utvärdering av PM brännaren

The PM-brännaren (pellets burner) have on commission by the company been measured and evaluated in the combustion laboratory of SERC. The objective was to measure the perform-ance and the emissions of CO and NO for three different combustion powers and for start and stop conditions. The burner have been mounted in the Bionett-boiler from Ariterm and been adjusted by the company. The boiler has been connected to a buffer store that admits firing during long period with constant inlet temperature to the boiler. The measurements have been performed by operating the boiler on constant power until stationary conditions are reached. Thereafter the following two hours of operation have been evaluated. The results show that the burner fulfils the limit values for Blauer Engel labelling and the proposed limit values for Nordic Eco labelling. The measured concentration of NO is far below all organisations limit values for NOx. Concerning the start and stop emissions there are no demands from organisa-tions to compare with, but comparing with other boilers measured at SERC, the CO emissions from PM-brännaren is in the same order of magnitude.

Knubbved istället för vanlig ved? : slutrapport från projekt Styckeved för småskalig eldning

Chunkwood is a wood fuel with a fuel particle length between 50 and 150 mm, i.e. with a sizebetween wood chips and conventional firewood. Chunkwood can be produced and handled asrational as wood chips and can dry during storage like conventional firewood. This is known sincelong. In project Smallwood for small scale heating we have investigated if chunkwood can be usedin a small scale as a fuel for heating detached houses in conventional firewood boilers as well asautomatically fed to a boiler in a similar way as wood chips. We have also compared completesystems for small scale production, distribution and heating with chunkwood, wood chips andconventional firewood.Storage of chunkwood produced for testing small scale boilers confirmed that chunkwood can dryduring storage at least as good as conventional firewood. Tests in different boilers for detachedhomes showed that chunkwood can be used in conventional firewood boilers as well as in automaticallyfed wood chips boilers. Chunkwood can be delivered to the customer to the same or lowercost as wood chips and firewood, but need much less handling by the customer than conventionalfirewood. However, if chunkwood is used in a conventional firewood boiler, it needs some handlingby shovel and wheelbarrow. Technical development of handling from the storage to the boiler isneeded. In a somewhat larger scale, e.g. a boiler for apartment blocks or a small district heatingsystem, chunkwood should be very interesting as a replacement of fuel pellets or fuel briquettes. Itwould be interesting with some projects, which in this scale demonstrates the whole system fromthe forest to heat.

Provningsmetod för integrerade sol-biosystem : Årsverkningsgrad genom korttidsmätning

Test method for integrated solar- biomass systems - Long term prediction trough short term measurementsSP Technical Research Institute of Sweden and SERC, Dalarna University have in cooperation developed a test method for integrated solar and biomass systems. The test method is performed under six days including two summer days, two winter days and two spring/autumn days true to real weather conditions and loads for a single family house. The aim of the test method is to get information about a Combisystem’s annual performance and operation throughout a short term test. Seven different solar Combisystems have been tested within the project together with a pellet boiler without solar collectors. In addition to that a comparative testing has been performed at the two laboratories at SP and at SERC on the same Combisystem. The test method developed within the project has been proved to withstand the aim of the project, which is to be able to compare the performance between the systems. The test method is also suitable for identification of possible operation problems so they can be taken care of and consequently improves the system.The project and the system testing reveal that it is in general favorable to combine biomass pellets with solar heating. Pellet boilers has normally a low performance during the summer period but combined with a solar collector the boiler can be switch off during this period. There are however big differences in performance between the tested. The efficiency of the pellet boiler is highly dependent of the operating conditions and elements like heat losses from the system, system configuration and control strategy have great influence of the performance of the system and the emissions. On the other hand, the performance and the size of the solar collectors have a minor effect on the overall system performance. There is obviously a big potential for improvement of the system´s performance and the developed test method is an essential way to implement this perfection.

Combined solar and pellet heating systems for single-family houses : How to achieve decreased electricity usage, increased system efficiency and increased solar gains

In Sweden, there are about 0.5 million single-family houses that are heated by electricity alone, and rising electricity costs force the conversion to other heating sources such as heat pumps and wood pellet heating systems. Pellet heating systems for single-family houses are currently a strongly growing market. Future lack of wood fuels is possible even in Sweden, and combining wood pellet heating with solar heating will help to save the bio-fuel resources. The objectives of this thesis are to investigate how the electrically heated single-family houses can be converted to pellet and solar heating systems, and how the annual efficiency and solar gains can be increased in such systems. The possible reduction of CO-emissions by combining pellet heating with solar heating has also been investigated. Systems with pellet stoves (both with and without a water jacket), pellet boilers and solar heating have been simulated. Different system concepts have been compared in order to investigate the most promising solutions. Modifications in system design and control strategies have been carried out in order to increase the system efficiency and the solar gains. Possibilities for increasing the solar gains have been limited to investigation of DHW-units for hot water production and the use of hot water for heating of dishwashers and washing machines via a heat exchanger instead of electricity (heat-fed appliances). Computer models of pellet stoves, boilers, DHW-units and heat-fed appliances have been developed and the parameters for the models have been identified from measurements on real components. The conformity between the models and the measurements has been checked. The systems with wood pellet stoves have been simulated in three different multi-zone buildings, simulated in detail with heat distribution through door openings between the zones. For the other simulations, either a single-zone house model or a load file has been used. Simulations were carried out for Stockholm, Sweden, but for the simulations with heat-fed machines also for Miami, USA. The foremost result of this thesis is the increased understanding of the dynamic operation of combined pellet and solar heating systems for single-family houses. The results show that electricity savings and annual system efficiency is strongly affected by the system design and the control strategy. Large reductions in pellet consumption are possible by combining pellet boilers with solar heating (a reduction larger than the solar gains if the system is properly designed). In addition, large reductions in carbon monoxide emissions are possible. To achieve these reductions it is required that the hot water production and the connection of the radiator circuit is moved to a well insulated, solar heated buffer store so that the boiler can be turned off during the periods when the solar collectors cover the heating demand. The amount of electricity replaced using systems with pellet stoves is very dependant on the house plan, the system design, if internal doors are open or closed and the comfort requirements. Proper system design and control strategies are crucial to obtain high electricity savings and high comfort with pellet stove systems. The investigated technologies for increasing the solar gains (DHW-units and heat-fed appliances) significantly increase the solar gains, but for the heat-fed appliances the market introduction is difficult due to the limited financial savings and the need for a new heat distribution system. The applications closest to market introduction could be for communal laundries and for use in sunny climates where the dominating part of the heat can be covered by solar heating. The DHW-unit is economical but competes with the internal finned-tube heat exchanger which is the totally dominating technology for hot water preparation in solar combisystems for single-family houses.

Dynamic whole system testing of combined renewable heating systems : the current state of the art

Objective: For the evaluation of the energetic performance of combined renewable heating systems that supply space heat and domestic hot water for single family houses, dynamic behaviour, component interactions, and control of the system play a crucial role and should be included in test methods. Methods: New dynamic whole system test methods were developed based on “hardware in the loop” concepts. Three similar approaches are described and their differences are discussed. The methods were applied for testing solar thermal systems in combination with fossil fuel boilers (heating oil and natural gas), biomass boilers, and/or heat pumps. Results: All three methods were able to show the performance of combined heating systems under transient operating conditions. The methods often detected unexpected behaviour of the tested system that cannot be detected based on steady state performance tests that are usually applied to single components. Conclusion: Further work will be needed to harmonize the different test methods in order to reach comparable results between the different laboratories. Practice implications: A harmonized approach for whole system tests may lead to new test standards and improve the accuracy of performance prediction as well as reduce the need for field tests.

Emissions from realistic operation of residential wood pellets heating systems

Emissions from residential combustion appliances vary significantly depending on the firing behaviours and combustion conditions, in addition to combustion technologies and fuel quality. Although wood pellet combustion in residential heating boilers is efficient, the combustion conditions during start-up and stop phases are not optimal and produce significantly high emissions such as carbon monoxide and hydrocarbon from incomplete combustion. The emissions from the start-up and stop phases of the pellet boilers are not fully taken into account in test methods for ecolabels which primarily focus on emissions during operation on full load and part load. The objective of the thesis is to investigate the emission characteristics during realistic operation of residential wood pellet boilers in order to identify when the major part of the annual emissions occur. Emissions from four residential wood pellet boilers were measured and characterized for three operating phases (start-up, steady and stop). Emissions from realistic operation of combined solar and wood pellet heating systems was continuously measured to investigate the influence of start-up and stop phases on total annual emissions. Measured emission data from the pellet devices were used to build an emission model to predict the annual emission factors from the dynamic operation of the heating system using the simulation software TRNSYS. Start-up emissions are found to vary with ignition type, supply of air and fuel, and time to complete the phase. Stop emissions are influenced by fan operation characteristics and the cleaning routine. Start-up and stop phases under realistic operation conditions contribute 80 – 95% of annual carbon monoxide (CO) emission, 60 – 90% total hydrocarbon (TOC), 10 – 20% of nitrogen oxides (NO), and 30 – 40% particles emissions. Annual emission factors from realistic operation of tested residential heating system with a top fed wood pelt boiler can be between 190 and 400 mg/MJ for the CO emissions, between 60 and 95 mg/MJ for the NO, between 6 and 25 mg/MJ for the TOC, between 30 and 116 mg/MJ for the particulate matter and between 2x10-13 /MJ and 4x10-13 /MJ for the number of particles. If the boiler has the cleaning sequence with compressed air such as in boiler B2, annual CO emission factor can be up to 550 mg/MJ. Average CO, TOC and particles emissions under realistic annual condition were greater than the limits values of two eco labels. These results highlight the importance of start-up and stop phases in annual emission factors (especially CO and TOC). Since a large or dominating part of the annual emissions in real operation arise from the start-up and stop sequences, test methods required by the ecolabels should take these emissions into account. In this way it will encourage the boiler manufacturers to minimize annual emissions. The annual emissions of residential pellet heating system can be reduced by optimizing the number of start-ups of the pellet boiler. It is possible to reduce up to 85% of the number of start-ups by optimizing the system design and its controller such as switching of the boiler pump after it stops, using two temperature sensors for boiler ON/OFF control, optimizing of the positions of the connections to the storage tank, increasing the mixing valve temperature in the boiler circuit and decreasing the pump flow rate. For 85 % reduction of start-ups, 75 % of CO and TOC emission factors were reduced while 13% increase in NO and 15 % increase in particle emissions was observed.

kit educacional para controle e supervisão aplicado a nível

PEREIRA, J. P. ; CASTRO, B. P. S. ; VALENTIM, R. A. M. . Kit Educacional para Controle e Supervisão Aplicado a Nível. Holos, Natal, v. 2, p. 68-72, 2009

A cidade sem barreiras é para todos?: avaliação das condições de deslocamento no bairro da Cidade Alta, Natal/RN

In this present work, the conditions of displacements and the behaviors of the users are evaluated, face to the physical adequacies in accessibility in the inserted area in the central quadrilateral of the Quarter of Cidade Alta, in the City of Natal/RN, space clipping established by its great meaning historical and cultural. For this reason such area was a target of an integrated actions plan during the years of 1993 and 1998, with the implantation of part of the Project CIDADE SEM BARREIRAS (City without Barriers) and, later, the implementation of the Project CIDADE PARA TODOS's proposals (City for All), having as supports the constant Brazilian norms inserted into the NB9050/1994 and in the Municipal law number 4.090/92, effective ones in the period of the interventions. Considering that the carried through actions at the time were directed to the elimination of the architectural barriers to guarantee the right to go and to come, the research received a human universe formed by all the people in situation of displacement in the central area of the interventions in the quarter of the Cidade Alta, independently of their locomotive or sensorial conditions, emphasizing the aspects most excellent how much to the accessibility of the sidewalk, as promotional of mobility, integration and urban organization, as well as of the public squares of that one quadrilateral, conceived, originally, as spaces of aggregation and social inclusion. The work appealed to the direct comment and the gotten results had been collated with the ex port facto law and technique norms, of the year of 2004, and with the legal devices contained in the Federal Decree number 5.296/2004, as way to certify the levels of efficiency of these adaptations in that it says respect to the current conditions of demanded accessibility and urban mobility

Corrective shoeing in horses: analysis of the adaptation period to the new condition imposed

O ferrageamento corretivo é um método comumente ma Dvideow. O nível de significância adotado foi de 5%. No utilizado para alterar o padrão do andamento dos animais, presente estudo, não houve diferença significativa entre os assim como na terapêutica de diversas afecções do siste-dias avaliados, a elevação em seis graus da pinça ou talões ma locomotor dos equinos. No entanto, não existem, até não gerou desconforto durante a passada, portanto, os ani o momento, estudos científicos que revelem o período de mais podem retornar às atividades regulares de exercício e adaptação do andamento dos animais a este tipo de in-treinamento imediatamente após o ferrageamento. tervenção.O objetivo deste estudo foi avaliar o período de adaptação à ferraduras com elevação em seis graus da pinça ou talões em equinos caminhando em esteira rolante. O período de adaptação à ferradura foi avaliado nos tempos 0, 48 e 96 horas após cada tipo de ferrageamento proposto. Os animais foram gravados caminhando em esteira rolante. O comprimento da passada e a análise qualitativa do andamento foram realizados com o auxílio do programa Dvideow. O nível de significância adotado foi de 5%. No presente estudo, não houve diferença significativa entre os dias avaliados, a elevação em seis graus da pinça ou talões não gerou desconforto durante a passada, portanto, os animais podem retornar às atividades regulares de exercício e treinamento imediatamente após o ferrageamento.