Sea-ice anomalies in the Sea of Okhotsk and the relationship with storm tracks in the Northern Hemisphere during winter

Previous studies have shown that sea-ice in the Sea of Okhotsk can be affected by local storms; in turn, the resultant sea-ice changes can affect the downstream development of storm tracks in the Pacific and possibly dampen a pre-existing North Atlantic Oscillation (NAO) signal in late winter. In this paper, a storm tracking algorithm was applied to the six hourly horizontal winds from the National Centers for Environmental Prediction (NCEP) reanalysis data from 1978(9) to 2007 and output from the atmospheric general circulation model (AGCM) ECHAM5 forced by sea-ice anomalies in the Sea of Okhotsk. The life cycle response of storms to sea-ice anomalies is investigated using various aspects of storm activity—cyclone genesis, lysis, intensity and track density. Results show that, for enhanced positive sea-ice concentrations in the Sea of Okhotsk, there is a decrease in secondary cyclogenesis, a westward shift in cyclolysis and changes in the subtropical jet are seen in the North Pacific. In the Atlantic, a pattern resembling the negative phase of the NAO is observed. This pattern is confirmed by the AGCM ECHAM5 experiments driven with above normal sea-ice anomalies in the Sea of Okhotsk

Role of rpoS in the Development of Cell Envelope Resilience and Pressure Resistance in Stationary-Phase Escherichia coli

This work investigated the role of rpoS in the development of increased cell envelope resilience and enhanced pressure resistance in stationary phase cells of Escherichia coli. Loss of both colony-forming ability and membrane integrity, measured as uptake of propidium iodide (PI), occurred at lower pressures in E. coli BW3709 (rpoS) than in the parental strain (BW2952). The rpoS mutant also released much higher concentrations of protein under pressure than the parent. We propose that RpoS-regulated functions are responsible for the increase in membrane resilience as cells enter stationary phase and that this plays a major role in the development of pressure resistance. Strains from the Keio collection with mutations in two RpoS-regulated genes, cfa (cyclopropane fatty acyl phospholipid synthase) and osmB (outer membrane lipoprotein), were significantly more pressure-sensitive and took up more PI than the parent strains with cfa having the greatest effect. Mutations in the bolA morphogene and other RpoS-regulated lipoprotein genes (osmC, osmE, osmY and ybaY) had no effect on pressure resistance. The cytoplasmic membranes of the rpoS mutant failed to reseal after pressure treatment and strains with mutations in osmB and nlpI (new lipoprotein) were also somewhat impaired in the ability to reseal their membranes. The cfa mutant, though pressure-sensitive, was unaffected in membrane resealing implying that the initial transient permeabilization event is critical for loss of viability rather than the failure to reseal. The enhanced pressure sensitivity of polA, recA and xthA mutants suggested that DNA may be a target of oxidative stress in pressure-treated cells.

Development of colour and firmness in strawberry crops is UV light sensitive, but colour is not a good predictor of several quality parameters

BACKGROUND: Strawberry (Fragaria × ananassa Duchesne var. Elsanta) plants were grown in polytunnels covered with three polythene films that transmitted varying levels of ultraviolet (UV) light. Fruit were harvested under near-commercial conditions and quality and yield were measured. During ripening, changes in the colour parameters of individual fruit were monitored, and the accuracy of using surface colour to predict other quality parameters was determined by analysing the correlation between colour and quality parameters within UV treatments. RESULTS: Higher exposure to UV during growth resulted in the fruit becoming darker at harvest and developing surface colour more quickly; fruit were also firmer at harvest, but shelf life was not consistently affected by the UV regime. Surface colour measurements were poorly correlated to firmness, shelf life or total phenolics, anthocyanins and ellagic acid contents. CONCLUSION: Although surface colour of strawberry fruits was affected by the UV regime during growth, and this parameter is an important factor in consumer perception, we concluded that the surface colour at the time of harvest was, contrary to consumer expectations, a poor indicator of firmness, potential shelf life or anthocyanin content. Copyright © 2011 Society of Chemical Industry

Regional implications of macro-economic, sectoral and company changes in the development of technopoles in Britain and France

This paper reports the proceedings of a conference held at Reading University in 1993 which addressed the issues of new technological developments at the regional and sub-regional levels in Britain and France. These new technological clusters - the `Technopoles' - are investigated in a series of papers in both English and French which examines their spatial, sectoral and economic aspects to determine what lessons can be learned from their development and what their future economic significance is likely to be. Two recurring themes are of particular significance in the papers - the link between R& D and regional development, and the different forms which innovation assumes within the various technopoles under scrutiny.

Future change of precipitation extremes in Europe: intercomparison of scenarios from regional climate mode

An analysis of the climate of precipitation extremes as simulated by six European regional climate models (RCMs) is undertaken in order to describe/quantify future changes and to examine/interpret differences between models. Each model has adopted boundary conditions from the same ensemble of global climate model integrations for present (1961–1990) and future (2071–2100) climate under the Intergovernmental Panel on Climate Change A2 emission scenario. The main diagnostics are multiyear return values of daily precipitation totals estimated from extreme value analysis. An evaluation of the RCMs against observations in the Alpine region shows that model biases for extremes are comparable to or even smaller than those for wet day intensity and mean precipitation. In winter, precipitation extremes tend to increase north of about 45°N, while there is an insignificant change or a decrease to the south. In northern Europe the 20-year return value of future climate corresponds to the 40- to 100-year return value of present climate. There is a good agreement between the RCMs, and the simulated change is similar to a scaling of present-day extremes by the change in average events. In contrast, there are large model differences in summer when RCM formulation contributes significantly to scenario uncertainty. The model differences are well explained by differences in the precipitation frequency and intensity process, but in all models, extremes increase more or decrease less than would be expected from the scaling of present-day extremes. There is evidence for a component of the change that affects extremes specifically and is consistent between models despite the large variation in the total response.

In vitro effects of extracts and purified tannins of sainfoin (Onobrychis viciifolia) against two cattle nematodes

Sainfoin (Onobrychis viciifolia) is a condensed tannin (CT)-containing legume and has anthelmintic potential against gastrointestinal nematodes of ruminants. This study investigated in vitro effects of acetone/water extracts and derived CT fractions from different types of sainfoin (i.e. accessions) against larvae of Cooperia oncophora and Ostertagia ostertagi by applying the larval feeding inhibition assay (LFIA). Seven sainfoin accessions were extracted and tested with L1 larvae at 10 and 40 μg extract/ml. In addition, CT in extracts from 4 accessions were fractionated according to polymer size and tested by LFIA at two concentrations (2 and 10 μg CT fraction/ml). All sainfoin extracts caused significant inhibition of L1-feeding of both C. oncophora and O. ostertagi with varying intensity compared to the control (phosphate buffered saline). For both nematode species the in vitro effect was positively correlated with CT content in the extracts, but not with any of the structural CT parameters. In contrast, the 16 CT fractions revealed significant correlations between in vitro effect and CT content, polymer size (mean degree of polymerisation, mDP) and monomeric composition (prodelphinidin percentage, % PD). These differences between crude extracts and purified fractions may stem from the fact that extracts contain complex CT mixtures, which may mask and thus suppress CT structural effects. This study provides the first indication that, apart from CT and % PD content, polymer size also contributes to anthelmintic activity of CTs. The results, therefore, suggest that the inter-accession variability in CT content and composition needs to be taken into account in future plant breeding programmes which seek to enhance the anthelmintic properties of sainfoin

The role of temperament and family environment in the development of anxiety disorder: two-year follow-up

Objective Behavioural inhibition (BI) in early childhood is associated with increased risk for anxiety. The present research examines BI alongside family environment factors, specifically maternal negativity and overinvolvement, maternal anxiety and mother-child attachment, with a view to providing a broader understanding of the development of child anxiety. Method Participants were 202 children classified at age 4 as either behaviourally inhibited (N=102) or uninhibited (N=100). Family environment, BI and child anxiety were assessed at baseline and child anxiety and BI were assessed again two-years later when participants were aged 6 years. Results After controlling for baseline anxiety, inhibited participants were significantly more likely to meet criteria for a diagnosis of social phobia and generalized anxiety disorder at follow-up. Path analysis suggested that maternal anxiety significantly affected child anxiety over time, even after controlling for the effects of BI and baseline anxiety. No significant paths from parenting or attachment to child anxiety were found. Maternal overinvolvement was significantly associated with BI at follow-up. Conclusions At age 4, BI, maternal anxiety and child anxiety represent risk factors for anxiety at age 6. Furthermore, overinvolved parenting increases risk for BI at age 6, which may then lead to the development of anxiety in later childhood.

Effects of Low-Level Laser Therapy (LLLT) in the Development of Exercise-Induced Skeletal Muscle Fatigue and Changes in Biochemical Markers Related to Postexercise Recovery

STUDY DESIGN: Randomized crossover double-blinded placebo-controlled trial. OBJECTIVE: To investigate if low-level laser therapy (LLLT) can affect biceps muscle performance, fatigue development, and biochemical markers of postexercise recovery. BACKGROUND: Cell and animal studies have suggested that LLLT can reduce oxidative stress and inflammatory responses in muscle tissue. But it remains uncertain whether these findings can translate into humans in sport and exercise situations. METHODS: Nine healthy male volleyball players participated in the study. They received either active LLLT (cluster probe with 5 laser diodes; A = 810 nm; 200 mW power output; 30 seconds of irradiation, applied in 2 locations over the biceps of the nondominant arm; 60 J of total energy) or placebo LLLT using an identical cluster probe. The intervention or placebo were applied 3 minutes before the performance of exercise. All subjects performed voluntary elbow flexion repetitions with a workload of 75% of their maximal voluntary contraction force until exhaustion. RESULTS: Active LLLT increased the number of repetitions by 14.5% (mean +/- SD, 39.6 +/- 4.3 versus 34.6 +/- 5.6; P = .037) and the elapsed time before exhaustion by 8.0% (P = .034), when compared to the placebo treatment. The biochemical markers also indicated that recovery may be positively affected by LLLT, as indicated by postexercise blood lactate levels (P<.01), creatine kinase activity (P = .017), and C-reactive protein levels (P = .047), showing a faster recovery with LLLT application prior to the exercise. CONCLUSION: We conclude that pre-exercise irradiation of the biceps with an LLLT dose of 6 J per application location, applied in 2 locations, increased endurance for repeated elbow flexion against resistance and decreased postexercise levels of blood lactate, creatine kinase, and C-reactive protein. LEVEL OF EVIDENCE: Performance enhancement, level 1b. J Orthop Sports Phys Ther 2010;40(8):524-532. doi:10.2519/jospt.2010.3294

The development of blowouts and foredunes in the Ilha Comprida barrier (Southeastern Brazil): the influence of Late Holocene climate changes on coastal sedimentation

Middle to Late Holocene barriers are conspicuous landforms in southeastern and southern Brazilian regions. The barriers in the coastal zones of northern Santa Catarina, Parana and Sao Paulo states (27 degrees 19`-24 degrees 00`S) are formed mainly by beach ridge alignments and many barriers present foredune and blowout alignments in their seaward portion. The development of these eolian landforms appears to record a regional shift in coastal dynamics and barrier building. In this context, the Ilha Comprida barrier stands out for its well-developed and well-preserved foredunes and blowouts. Based on the presence or not and type of eolian landforms, the Ilha Comprida barrier can be divided seaward into inner, middle and outer units. The inner unit is formed entirely by beach ridges. The middle unit comprises a narrow belt of blowouts (up to 15 m high) aligned alongshore. Blowout lobes pointing NNW are indicative of their generation by southern winds. The outer unit is represented by low (<= 1 m high) active or stabilized foredunes and a small transgressive dunefield (similar to 1 km(2)). Twenty-seven luminescence ages (SAR protocol) obtained for the beach ridges, foredunes, and blowouts of these three units allow definition of a precise chronology of these landforms and calculation of rates of coastal progradation. The inner unit presents ages greater than 1004 +/- 88 years. The blowouts of the middle unit show ages from 575 +/- 47 to 172 +/- 18 years. The ages of the outer unit are less than 108 +/- 10 years. Rates of coastal progradation for the inner and outer units are 0.71-0.82 m/year and 0.86-2.23 m/year, respectively. The main phase of blowout development correlates well with the Little Ice Age (LIA) climatic event. These results indicate that southern winds in subtropical Brazil became increasingly more intense and/or frequent during the LIA. These conditions persist to the present and are responsible for the development of the eolian landforms in the outer unit. Thus, barrier geomorphology can record global climatic events. The sensitivity of barrier systems in subtropical Brazil to Late Holocene climate changes was favored by the relative sea level stillstand during this time. Luminescence dating makes it possible to analyze barrier geomorphology during Late Holocene climate changes operating on timescales of a hundred to thousand years. These results improve our knowledge of barrier building and will help in the evaluation of the impact of future climate changes on coastal settings. (C) 2008 Elsevier Ltd. All rights reserved.

Wear of coated and uncoated PCBN cutting tool used in turning and milling

This licentiate thesis has the main focus on evaluation of the wear of coated and uncoated polycrystalline cubic boron nitride cutting tool used in cutting operations against hardened steel. And to exam the surface finish and integrity of the work material used. Harder work material, higher cutting speed and cost reductions result in the development of harder and more wear resistance cutting tools. Although PCBN cutting tools have been used in over 30 years, little work have been done on PVD coated PCBN cutting tools. Therefore hard turning and hard milling experiments with PVD coated and uncoated cutting tools have been performed and evaluated. The coatings used in the present study are TiSiN and TiAlN. The wear scar and surface integrity have been examined with help of several different characterization techniques, for example scanning electron microscopy and Auger electron spectroscopy.   The results showed that the PCBN cutting tools used displayed crater wear, flank wear and edge micro chipping. While the influence of the coating on the crater and flank wear was very small and the coating showed a high tendency to spalling. Scratch testing of coated PCBN showed that, the TiAlN coating resulted in major adhesive fractures. This displays the importance of understanding the effect of different types of lapping/grinding processes in the pre-treatment of hard and super hard substrate materials and the amount and type of damage that they can create. For the cutting tools used in turning, patches of a adhered layer, mainly consisting of FexOy were shown at both the crater and flank. And for the cutting tools used in milling a tribofilm consisting of SixOy covered the crater. A combination of tribochemical reactions, adhesive wear and mild abrasive wear is believed to control the flank and crater wear of the PCBN cutting tools. On a microscopic scale the difference phases of the PCBN cutting tool used in turning showed different wear characteristics. The machined surface of the work material showed a smooth surface with a Ra-value in the range of 100-200 nm for the turned surface and 100-150 nm for the milled surface. With increasing crater and flank wear in combination with edge chipping the machined surface becomes rougher and showed a higher Ra-value. For the cutting tools used in milling the tendency to micro edge chipping was significant higher when milling the tools steels showing a higher hard phase content and a lower heat conductivity resulting in higher mechanical and thermal stresses at the cutting edge.

Study of the innovation management process in the development of a discontinuous product case: Motorola RAZR V3

This study will collaborate by bringing some detailed analysis and findings on a special case study of a discontinuous product development process, trying to answer how the discontinuous product development process takes place and the main factors that influence this process. Additionally, it tried to explore some explanations for the difficulties generally faced by the companies to sustain innovation. The case is about the Motorola cell phone RAZR V3, launched in 2004. RAZR V3 was noted by industry experts as game-changing feat of design and engineering, selling more than 110 million units by end of 2008 and recognized as one of the fastest selling products in the industry. The study uses a single case methodology, which is appropriate given the access to a phenomenon that happened inside corporate dominium and it is not easily accessed for academic studies, besides being a rare case of success in the cellular phone industry. In order to magnify the understanding of the phenomenon, the exploration was extended to contrast the RAZR development process and the standard product development process in Motorola. Additionally, it was integrated a longitudinal reflection of the company product development evolution until the next breakthrough product hitting the cellular phone industry. The result of the analysis shows that discontinuous products do not fit well traditional product development process (in this case, stage-gate). This result reinforces the results obtained on previous studies of discontinuous product development conducted by other authors. Therefore, it is clear that the dynamics of discontinuous product development are different from the continuous product development, requiring different treatment to succeed. Moreover, this study highlighted the importance of the management influence in all the phases of the process as one of the most important factors, suggesting a key component to be carefully observed in future researches. Some other findings of the study that were considered very important for a discontinuous product development process: have champions (who believe and protect the project) and not only one champion; create a right atmosphere to make flow the creative process; question paradigms to create discontinuous products; simple guiding light to focus the team; company culture that accepts and knows how to deal with risks; and undoubtedly, have a company strategy that understands the different dynamics of continuous and discontinuous product development processes and treat them accordingly.