Desenvolvimento de mudas de Tabeluia chrysotricha em função de substratos e de soluções de fertirrigação

The work aimed to study the development of Tabebuia chrysotricha Standl. seedlings injunction of different substrate and different fertilization solutions. To compose the substrate it was used fibrous and granulated coconut fiber obtaining the following treatments: S1- 100% fibrous, S2- 60% fibrous and 40% granulated, S3- 40% fibrous and 60% granulated and S4- 100% granulated. The basis fertilization was the same for all treatments and the solutions of fertilization varied in order to obtain solutions with the following electric conductivities: EC1- 1.06 dS m(-1), EC2- 2.12 dS m(-1), EC3- 3.2 dS m(-1) and EC4- 4.25 dS m(-1). The propagative material was sowed directly in plastic containers (120mL) with the respective substrates. The fertilization was received through sub irrigation once a week, until the seedlings reached 20cm of height approximately. The chemical analyses of the substrate (EC and pH), through aqueous extraction method 1:1.5 (1 substrate: 1.5 deionized water), the analyses of aerial part height, stein diameter and pairs true leaves number, as well as the weight of total dry, matter, were accomplished each 15 days. In almost every analysis, the substrate with granulated coconut fiber, as well as the smallest EC (1.06 e 2.12 dS m(-1)) of fertilization solutions,formed seedlings with higher averages, indicating faster growth. In the conditions of this experiment, the production of T. chrysotricha seedlings was better in granulated coconut fiber substrate and fertilizer solutions with EC of 1.06 dS m(-1), appreciating the estimated characteristics.

Composição química e aspectos morfológicos de mudas de Tabebuia chrysotricha (Standl.) produzidas em diferentes substratos e soluções de fertirrigação

The work aimed to study the formation of Tabebuia chrysotricha Standl. seedlings in function of four substrates, varying the covering fertilization solutions. To compose the substrate it was used fibrous and granulated coconut fiber obtaining the following treatments: 100% fibrous (100% F), 60% fibrous + 40% granulated (60% F+40% G), 40% fibrous + 60% granulated (40% F+60% G) and 100% granulated (100% G). The basis fertilization was the same for all treatments and the solutions of covering fertilization varied in order to obtain complete solutions with electric conductivities of 1.06 dS m(-1), 2.12 dS m(-1), 3.2 dS m(-1) and 4.25 dS m(-1). The propagative material was sowed directly in plastic containers (120mL) with the respective substrates. The fertilization was received through sub-irrigation once a week, respecting the treatments of fertilizations. Seedlings produced in 100%G had been taller and higher than the others. The chemical analyses of aerial part were obtained when the seedlings were ready for expedition (height of 20 cm). The seedlings production in substrate 100% F and 60% F+40% G allowed them to have higher N, S, B, Mn and Zn concentrations in the aerial part. The production of T chrysotricha seedlings is recommended in granulated coconut fiber substrate and fertilizer solutions with EC of 1.06 dS m(-1)

Properties of a new fungal b-galactosidase with potential application in the dairy industry

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Atividade do acaricida etoxazol sobre a mortalidade e reprodução do ácaro-da-leprose Brevipalpus phoenicis (Geijskes) (Acari: Tenuipalpidae), em citros

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Crystallization, preliminary X-ray analysis and Patterson search of a new aspartic protease isolated from human urine

Aspartic protease (EC 3.4.23) make up a widely distributed class of enzymes in animals, plants, microbes and, viruses. In animals these enzymes perform diverse functions, which range from digestion of food proteins to very specific regulatory roles. In contrast the information about the well-characterized aspartic proteases, very little is known about the corresponding enzyme in urine. A new aspartic protease isolated from human urine has been crystallized and X-ray diffraction data collected to 2.45 Angstrom resolution using a synchrotron radiation source. Crystals belong to the space group P2(1)2(1)2(1) the cell parameters obtained were a=50.99, b=75.56 and c=89.90 Angstrom. Preliminary analysis revealed the presence of one molecule in the asymmetric unit. The structure was determined using the molecular replacement technique and is currently being refined using simulated annealing and conjugate gradient protocols.

Effect of Conditioning on the Production of Inulinase by Kluyveromyces marxianus var. bulgaricus through Fed-Batch Fermentation

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Effect of the aerobic capacity on the validity of the anaerobic threshold for determination of the maximal lactate steady state in cycling

The maximal lactate steady state (MLSS) is the highest blood lactate concentration that can be identified as maintaining a steady state during a prolonged submaximal constant workload. The objective of the present study was to analyze the influence of the aerobic capacity on the validity of anaerobic threshold (AT) to estimate the exercise intensity at MLSS (MLSS intensity) during cycling. Ten untrained males (UC) and 9 male endurance cyclists (EC) matched for age, weight and height performed one incremental maximal load test to determine AT and two to four 30-min constant submaximal load tests on a mechanically braked cycle ergometer to determine MLSS and MLSS intensity. AT was determined as the intensity corresponding to 3.5 mM blood lactate. MLSS intensity was defined as the highest workload at which blood lactate concentration did not increase by more than 1 mM between minutes 10 and 30 of the constant workload. MLSS intensity (EC = 282.1 ± 23.8 W; UC = 180.2 ± 24.5 W) and AT (EC = 274.8 ± 24.9 W; UC = 187.2 ± 28.0 W) were significantly higher in trained group. However, there was no significant difference in MLSS between EC (5.0 ± 1.2 mM) and UC (4.9 ± 1.7 mM). The MLSS intensity and AT were not different and significantly correlated in both groups (EC: r = 0.77; UC: r = 0.81). We conclude that MLSS and the validity of AT to estimate MLSS intensity during cycling, analyzed in a cross-sectional design (trained x sedentary), do not depend on the aerobic capacity.

Initiating structural studies of Lys49-PLA2 homologues complexed with an anionic detergent, a fatty acid and a natural lipid

Lys49-Phospholipase A(2) (Lys49-PLA(2) - EC 3.1.1.4) homologues damage membranes by a Ca2+-independent mechanism which does not involve catalytic activity. Both MjTX-II from Bothrops moojeni and BthTX-I from Bothrops jararacussu are dimeric in solution and in the crystalline states, and a model for the Ca2+-independent membrane damaging mechanism has been suggested in which flexibility at the dimer interface region pert-nits quaternary structural transitions between open and closed membrane bound dimer conformations which results in the perturbation of membrane phospholipids and disruption of the bilayer structure [1]. With the aim of gaining insights into the structural determinants involved in protein/lipid association, we report here the crystallization and preliminary X-ray analysis of the (i) MjTX-II/SDS complex at a resolution of 2.78Angstrom, (ii) MjTX-II/STE complex at a resolution of 1.8 Angstrom and (W) BthTX-I/DMPC complex at 2.72Angstrom. These complexes were crystallized by the hanging drop vapour-diffusion technique in (i) HEPES buffer (pH 7.5) 1.8M ammonium sulfate with 2% (w/v) polyethyleneglycol 400, in (ii) 0.6-0.8 M sodium citrate as the precipitant (pH 6.0-6.5) and in (iii) sodium citrate buffer (pH 5.8) and PEG 4000 and 20% isopropanol, respectively. Single crystals of these complexes have been obtained and X-ray diffraction data have been collected at room temperature using a R-AXIS IV imaging plate system and graphite monochromated Cu Kalpha X-ray radiation generated by a Rigaku RU300 rotating anode generator for (i) and (W) and using using a Synchrotron Radiation Source (Laboratorio Nacional de Luz Sincrotron, LNLS, Campinas, Brazil) for (ii).

Cutinases fúngicas: propriedades e aplicações industriais

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Análise de fatores genéticos e ambientais que afetam a infestação de fêmeas bovinas da raça Caracu por carrapatos (Boophilus microplus)

Este trabalho foi conduzido com o objetivo de avaliar o efeito de fatores de meio sobre a infestação de bovinos Caracu pelo carrapato Boophilus microplus (Canestrini, 1887) e estimar parâmetros genéticos do grau de infestação por esse ectoparasita. Foram realizadas contagens em fêmeas de dois rebanhos, nas quatro estações, por dois anos consecutivos (setembro/1998 a julho/2000). Contou-se o número de carrapatos (NC) em um dos lados do animal e atribuiu-se escore visual (EC) de acordo com a quantidade de carrapatos no animal. Foram feitas de uma a oito avaliações, totalizando-se 4.079 e 3.994 observações de NC e EC, respectivamente, em 718 animais. Os dados foram analisados pelo método dos quadrados mínimos com um modelo que incluiu efeitos de rebanho (R), cor do animal (C), R x C, animal dentro de R x C como erro a, ano e estação da avaliação, espessura de pelame e idade do animal como covariável. As estimativas dos componentes de variância foram obtidas pelo método da máxima verossimilhança restrita livre de derivadas, utilizando-se um modelo que incluiu os efeitos fixos de grupo de contemporâneos (fazenda-ano-época), espessura do pelame e idade do animal como covariável e os efeitos aleatórios aditivos diretos e de ambiente permanente. Antes das análises, a variável NC foi transformada para log10 (n + 1) e EC para (x + 0,5)½, em que n é o número de carrapatos contados no animal e x, o escore (0 a 4). A incidência de carrapatos foi maior no verão e, quanto maior a espessura do pelame, maior o nível de infestação. As estimativas de herdabilidade e repetibilidade foram, respectivamente, 0,22 e 0,29 para NC e 0,15 e 0,21 para EC; a correlação genética entre NC e EC foi igual a 1,00. Os resultados sugerem que é possível obter progresso genético para resistência a carrapato pela seleção.

Production of low methoxyl pectin using immobilized pectin methylesterase silica from acerola (Malpighia glabra L.)

The aim of this work was to develop an efficient reactor for the production of low methoxyl pectin, using pectinmethylesterase (PME, EC 3.1.1.11) from acerola immobilized on silica. The immobilized enzyme was used in up to 50 successive bioconversion runs at 50 degrees C with an efficiency loss of less than 20%. The fixed-bed reactor (6.0 x 1.5 cm) was prepared using PME immobilized in glutaraldehyde-activated silica operated at 50 degrees C with an optimum flow rate of 10 mL h(-1). The bioconversion yield was shown to strongly depend on the nature of the enzymatic preparation. An efficiency of 44% was achieved when concentrated PME was used, compared with only 30% with purified PME, both after an 8-h run. The process described could provide the basis for the development of a commercial-scale process. (c) 2006 Society of Chemical Industry.

Purification and biochemical characterization of an endoxylanase from Aspergillus versicolor

An endoxylanase (beta-1,4-xylan xylanohydrolase, EC 3.2.1.8) was purified from the culture filtrate of a strain of Aspergillus versicolor grown on oat wheat. The enzyme was purified to homogeneity by chromatography on DEAE-cellulose and Sephadex G-75. The purified enzyme was a monomer of molecular mass estimated to be 19 kDa by SDS-PAGE and gel filtration. The enzyme was glycoprotein with 71% carbohydrate content and exhibited a pI of 5.4. The purified xylanase was specific for xylan hydrolysis. The enzyme had a K-m of 6.5 mg ml(-1) and a V-max of 1440 U (mg protein)(-1). (C) 1998 Federation of European Microbiological Societies. Published by Elsevier B.V. B.V. All rights reserved.

A molecular mechanism for Lys(49)-phospholipase A(2) activity based on ligand-induced conformational change

Agkistrodon contortrix laticinctus myotoxin is a Lys(49)- phospholipase A(2) (EC 3.1.1.4) isolated from the venom of the serpent A contortrix laticinctus (broad-banded copperhead). We present here three monomeric crystal structures of the myotoxin, obtained under different crystallization conditions. The three forms present notable structural differences and reveal that the presence of a ligand in the active site (naturally presumed to be a fatty acid) induces the exposure of a hydrophobic surface (the hydrophobic knuckle) toward the C terminus. The knuckle in A contortrix laticinctus myotoxin involves the side chains of Phe(121) and Phe(124) and is a consequence of the formation of a canonical structure for the main chain within the region of residues 118-125. Comparison with other Lys(49)-phospholipase A(2) myotoxins shows that although the knuckle is a generic structural motif common to all members of the family, it is not readily recognizable by simple sequence analyses. An activation mechanism is proposed that relates fatty acid retention at the active site to conformational changes within the C-terminal region, a part of the molecule that has long been associated with Ca2+-independent membrane damaging activity and myotoxicity. This provides, for the first time, a direct structural connection between the phospholipase active site and the C-terminal myotoxic site, justifying the otherwise enigmatic conservation of the residues of the former in supposedly catalytically inactive molecules.

Acerola's pectin methylesterase: studies of heat inactivation

The effect of temperature on the activity of acerola's pectin methylesterase (PME) was studied to determine its heat-inactivation. The acerola's pectin methylesterase (PME; EC: 3.1.1.11) is very stable at 50 degrees C (10% loss of activity in 100 min) and needed 110 min for its inactivation at 98 degrees C. These values are much higher than the ones required for inactivation of the citrus PME, that has been reported as being equal to 1 min at 90 degrees C. Heat-inactivation of PME was shown to be nonlinear, suggesting the presence of fractions of PME with differing heat-stabilities. The times to inactive the enzyme at 98, 102 and 106 degrees C were 110, 10 and 2.17 min, respectively. The Z value (the rise in temperature necessary to observe a ten times faster heat-inactivation) was 4.71 degrees C. (C) 2000 Elsevier B.V. Ltd. All rights reserved.

Cholinesterase measurements with an automated kit

Background the Test-mate kit determines acetylcholinesterase (AChE, EC 3.1.1.7) and hemoglobin content of a drop of blood, displaying enzyme activities normalized to 25degreesC. Previous models produced inconsistent results at different temperatures. This report focuses on the current model, ChE 400, and two instruments of a previous OP model.Methods AChE activities were determined by the Ellman assay, using the three kits and a 96-well microplate reader Temperatures ranged from 10 to 37degreesC. Fetal bovine serum was the source of AChE.Results Normalized activities decreased below 20degreesC in the ChE model and below 25 C in the OP models. Activities of the same serum sample differed between the three Test-mate kits, ranging from 1.03 to 1.49 mumoles/min/ml. Percent errors were greater than with the microplate reader at all temperatures.Conclusions Neither we nor the manufacturer recommend the current Test-mate model for fieldwork. Nevertheless, there have been field measurements with Test-Mate kits, and we recommend that an enzyme activity standard be run in parallel with their use. (C) 2002 Wiley-Liss, Inc.